Industry | Automotive |
---|---|
Founded | 1965 |
Founder | WJ (Bill) Last |
Defunct | 1977 |
Fate | Insolvency |
Headquarters | Woodbridge, Ipswich (United Kingdom) |
Trident Cars Ltd was a British car manufacturer based originally in Woodbridge, then in Ipswich, Suffolk between 1966 and 1974. [1] The company produced a small series of sports cars with different engines from 1967 to 1977 and was later re-established in 1999.
Trident Cars has its origins in a failed project by the sports car manufacturer TVR.
TVR went through a series of bankruptcies and takeovers in the early 1960s. Layton Sports Cars, founded in 1959 and renamed TVR Cars in 1961, was insolvent at the end of 1962 and was dissolved. The newly founded Grantura Engineering Ltd. took its place and continued production of the TVR Grantura at the same Blackpool facilities. At the end of 1965, Grantura Engineering was also insolvent. In addition to the TVR Grantura, the companies also had the Griffith 200 (later 400) in their range, which, with an unchanged body, was equipped with an eight-cylinder V-engine from Ford USA instead of a British four-cylinder engine. It was primarily intended for the North American market.
In 1962, Brian Hopton, one of the owners of TVR Cars, commissioned the British designer Trevor Fiore to design a new body for the Griffith 200. He had previously tried in vain to recruit Frank Costin as a designer. [2] Fiore designed a compact hatchback coupe, of which the Italian Carrozzeria Fissore produced a prototype with an aluminum body and an extended TVR chassis. [3] Fissore presented it as the Trident at the Geneva Motor Show in March 1965. During the course of the year, Fissore built two more prototypes - a coupé and a convertible - but after the bankruptcy of Grantura Cars at the end of 1965, the Trident project was initially discontinued. [4] Arthur and Martin Lilley, who took over the production facilities in Blackpool in November 1965 and incorporated them into the newly founded company TVR Engineering, initially assumed that they would also take over the Trident project. In fact, the British TVR dealer William “Bill” Last had previously acquired the rights to Fiore’s design and the moulds for the Trident body. [2]
Bill Last founded Trident Cars, initially in Woodbridge, using the premises he previously used for manufacture of the Peel Viking Sport. The company later moved to Ipswich. The newly founded company presented a fourth prototype at the Racing Car Show in Olympia in 1966, but little more was heard until the company presented a fifth prototype, again at Olympia, in 1967. Trident later began series production of the coupé in 1967, largely following Trevor Fiore's prototypes in terms of style. Over the years, different six and eight cylinder engines of British and US origin were installed; the respective vehicles were given different model names. [5] In 1974, Trident temporarily stopped production. In 1975 the company was restructured. The US investor Ernest Stern took over the majority share. Trident then tried to reach the North American market with a revised version of the Clipper, but nothing came of it and only two cars were built. [6]
Engine problems in the cars, the oil crisis and the financial climate in the 1970s resulted in the company closing down in 1974. An attempt was made to restart production in 1976 but few cars were made before final closure in 1977.
Most sources assume that Trident sold a total of around 130 vehicles from 1967 to 1977, with one source even saying 225 vehicles. [7] The British brand club sets the production figure even lower. By 2016, he had only been able to produce a total of 85 Trident coupés. [8]
In May 1999 the company was re-established in Fakenham. [9] The first result of this new venture was the prototype of a two-seater spider, the Iceni, which was presented at the Birmingham International Motor Show the following year. [10] [11] [12] . The car featured a 3.2-liter V6 engine. From 2007 the concept was equipped with a 6.6-liter General Motors turbodiesel V8 engine. [13] In 2014 the closed version was presented with the name Iceni Magna. The car has yet to be produced due to funding issues. [14]
Trident Cars' first model was the Clipper coupe. It was based on the 1965 TVR Trident prototype. Technically, Trident broke away from the TVR roots. Instead of an extended Grantura chassis like the prototypes, the production models in the first few years had Austin-Healey 3000 chassis. After production stopped in 1969, Trident used Triumph TR6 chassis , which were slightly lengthened. The driving behaviour was particularly problematic when cornering and braking. [7] The car was claimed to have a maximum speed of 150 mph (240 km/h) and a 0-60 mph time of 5 seconds. It was available as a complete car or in kit form. The cars were expensive, the kit version costing £1,923.
The first 30 Clippers were equipped with eight-cylinder V-engines with a displacement of 4727 cm³ (289 cubic inches) from Ford, which delivered 271 bhp (275 hp; 202 kW) and in a similar form from 1962 to 1967, had been installed in the TVR Griffith 200 and 400. Shelby also used them in the AC Cobra 289. The 30 Ford engines came from an order from Grantura Engineering before the bankruptcy. Bill Last had taken it over along with the Trident package. [8] The retail price in its debut year was £1,923 before tax. This made the Trident £1,000 cheaper than the AC Cobra 289. [1] After this supply was exhausted, Trident did not purchase any more engines from Ford. Some publications give the reason for this as “delivery difficulties” at Ford or a strike. [4] [15] [7]
The factory instead offered the Clipper with eight-cylinder engines from Chrysler starting in 1971. They had a displacement of 5576 cm³, produced around 300 bhp (304 hp, 224 kW) according to factory information and were coupled to a three-speed automatic transmission from Chrysler. The retail price in 1971 before tax was £3,398. [16] It is unclear how many Clippers were produced with Chrysler engines. One source assumes that only one exhibit was created, while series production did not materialize. [1]
The information on the production numbers of the Clipper varies in the literature between 35 and 39 vehicles in total. [5] [17] [15] The British brand club, however, only assumes 30 vehicles. [8] This would be consistent with the assumption that the Chrysler-engined Clipper was not mass-produced.
The Venturer was the second and by far most successful variant of the Trident Coupé. It appeared in 1969. All examples were based on the extended chassis of the Triumph TR6, giving the car independent suspension all round by coil springs. The Venturer was equipped with a 3.0 litre (2,996 cc) version of the British Ford Essex six-cylinder engine. The power was transmitted by a manual four-speed gearbox. The car cost £2,298 (in kit form) ex-tax before taxes in 1971. Most sources assume that a total of 84 examples of the Venturer were produced until 1974. [15] The British brand club, however, only assumes 49 vehicles. [8]
This coupé appeared in 1971. Instead of the eight-cylinder engine from Ford, it had a 2498 cc in-line six-cylinder engine from Triumph with fuel injection. It produced 150 bhp and was connected to an automatic transmission. [16] Six or seven copies of this version were made. [8] [15]
After restructuring the company, Trident introduced a revised version of the Clipper at the 1976 London Motor Show. It differed from the earlier models in that it had a differently designed front section and safety bumpers according to US specifications. The exhibit was equipped with a 223 hp eight-cylinder engine from Chrysler with a displacement of 5898 cm³. According to one source, a V8 engine from Ford was also available as an alternative. [18] Trident wanted to enter the US market with this version. That didn't happen. Due to ongoing economic difficulties, only two copies of the new Clipper were built. [17] One car had right-hand drive and the second left-hand drive. [8]
Along with the new edition of the Clipper in 1977, Trident also announced a new six-cylinder version. As with the previous Venturer, the Ford Essex engine with a displacement of 3.0 liters and 138 hp was to be used here. [18] There is no evidence of production of this new Venturer.
AC Cars, originally incorporated as Auto Carriers Ltd., is a British specialist automobile manufacturer and one of the oldest independent car makers founded in Britain. As a result of bad financial conditions over the years, the company was renamed or liquidated many times until its present form. In 2022, the new corporate structure began the production of new AC Cobra models, with a slightly modified structure to adapt it to modern safety and technology requirements and obtain the European road homologation certificate.
TVR is a British manufacturer of sports cars. The company manufactures lightweight sports cars with powerful engines and was, at one time, the third-largest specialised sports car manufacturer in the world, offering a diverse range of coupés and convertibles.
Reliant Motor Company was a British car manufacturer based in Tamworth, Staffordshire, England. It was founded in 1935 and ended car production in 2002, the company had been known as "Reliant Motor Company" until the 1990s when it became "Reliant Motors" and then finally became "Reliant Cars LTD" after production had ended of the Robin as the company was restructured to be a car import business. It is now a dormant company and the only entity left is a separate parts company created called "Reliant Partsworld" which produces parts for Reliant vehicles.
Marcos Engineering was a British sports car manufacturer. The name derives from the surnames of founders Jem Marsh and Frank Costin.
De Tomaso Automobili Ltd. is an Italian car-manufacturing company. It was founded 1959 by Alejandro de Tomaso in Modena. It originally produced various sports prototypes and auto racing vehicles, including a Formula One car for Frank Williams Racing Cars in 1970. Most of the funding for the automaker came from Amory Haskell Jr.
Lea-Francis was a British motor manufacturing company that began by building bicycles.
The BMC B series was a line of straight-4 & straight-6 internal combustion engine mostly used in motor cars, created by British automotive manufacturer Austin Motor Company.
Elva was a sports and racing car manufacturing company based in Bexhill, then Hastings and Rye, East Sussex, United Kingdom. The company was founded in 1955 by Frank G. Nichols. The name comes from the French phrase elle va.
Albion Motors was a Scottish automobile and commercial vehicle manufacturer.
Fiat Chrysler Australia, officially FCA Australia, is the official Stellantis subsidiary in that country, operating as distributor of Chrysler, Jeep, Dodge, Abarth, Alfa Romeo and Fiat vehicles. However, there had previously been a "Chrysler Australia Ltd" which had operated as a vehicle manufacturer in Australia from 1951 until 1980, and was subsequently taken over by Mitsubishi Motors Australia.
The TVR Grantura is the first production model in a long line of TVR cars. It debuted in 1958 and went through a series of developments leading to the Mark I to Mark IV and 1800S models. The last ones were made in September 1967.
The Rayton-Fissore Magnum is an Italian-designed and built luxury off-roader, in small scale production between 1985 and 1998. The American V8-powered versions were marketed as Laforza and were built from 1989 until 2003.
Shelby American, Inc. is an American high performance automobile company founded by driver Carroll Shelby. The Shelby American name has been used by several legally distinct corporations founded by Shelby since his original shop in Venice, California began operation in 1962. The current iteration is a wholly owned subsidiary of Carroll Shelby International, Inc., a holding company formed in 2003. Carroll Shelby International's other wholly owned subsidiary is Carroll Shelby Licensing, which licenses the name and trademarks associated with Shelby to other companies. Shelby American was the first automobile manufacturer in the state of Nevada. Shelby American manufactures component automobiles, including replicas of the small-block and large-block AC Cobras, the Shelby GT350 and the GT500 Super Snake. Since 2005, Shelby American has released new models each year.
A V8 engine is an eight-cylinder piston engine in which two banks of four cylinders share a common crankshaft and are arranged in a V configuration.
The Monteverdi High Speed is a series of sports cars with different bodies produced from 1967-1976 by Swiss automaker Monteverdi. The High Speed series included several coupe models, a convertible and a sedan. In addition, the Coupé Berlinetta and the Cabriolet Palm Beach also belong to the model family.
The TVR M series is a line of sports cars built by automaker TVR between 1972 and 1979. The series replaced the outgoing TVR Vixen and Tuscan models, and is characterized by a common chassis and shared body style. As with other TVR models before and since, the M-series cars use a front mid-engine, rear-wheel drive layout and body-on-frame construction. The bodies themselves were built from glass-reinforced plastic (GRP). The era of the M series is commonly associated with Martin Lilley who, together with his father, took ownership of the company on 30 November 1965.
The TVR Vixen is a hand-built sports car which was produced by TVR in Blackpool, England from 1967 until 1973. Ford-engined in most of its configurations, it succeeded the MGB-engined TVR Grantura 1800S. It is also the basis for the high-performance TVR Tuscan which was available in both V6 and V8 configurations.
In 2015 Spain produced 2.7 million cars which made it the 8th largest automobile producer country in the world and the 2nd largest car manufacturer in Europe after Germany. The forecast as of 2016 was to produce a total of 2.8 million vehicles from which about 80% is for export. During the first half of 2016, with exports valued over 24 billion euros over that period, the automotive industry accounted for 18.9% of the total Spanish exports.
Carrozzeria Fissore was an Italian coachbuilder located in Savigliano, near Turin (Piedmont).
The Ginetta G26 and its derivatives, the 'G28, G30, and G31, are a series of two-door sports cars, designed, developed, and manufactured by British company Ginetta, from 1984 to 1992, primarily in kit form. All models are based on Ford mechanical components. They differ in length as well as in different bodies and engines. All variants together, about 360 vehicles were built in eight years.