USCGC Liberty

Last updated
USCGCLiberty(WPB-1334).jpg
USCGC Liberty, off the coast of Alaska, 2008.
History
Flag of the United States Coast Guard.svgUnited States
NameUSCGC Liberty
CommissionedDecember 18, 1989
Identification
StatusActive
General characteristics
Class and type Island-class patrol boat
Displacement155 tons
Length110 feet (34 m)
Beam21 feet (6.4 m)
Draft7 feet (2.1 m)
Propulsion2 diesel engines
Speed29.6 knots
Complement2 officers, 16 enlisted
Armament

USCGC Liberty (WPB-1334) is an Island-class cutter of the United States Coast Guard. She spent her first 33 years of service homeported in Juneau, Alaska where she patrolled territorial waters, including the Inside Passage. In 2016 she won the Hopley Yeaton Cutter Excellence Award for outstanding operational and humanitarian achievements. [1] In 2022 she was reassigned to Valdez, Alaska. [2]

Contents

Design and characteristics

USCGC Liberty mooring at Auke Bay, Alaska USCGC Liberty.jpg
USCGC Liberty mooring at Auke Bay, Alaska

The Island-class patrol boats, including Liberty, were constructed in Bollinger Shipyards, Lockport, Louisiana. Their design is based on the British Vosper Thornycroft 33 metres (108 ft) patrol boats and have similar dimensions.Liberty has an overall length of 110 feet (34 m), a beam of 21 feet (6.4 m), and a draft of 7 feet (2.1 m) at full load. The patrol boat has a displacement of 155 tons at full load and 138 tons at half load.

The Coast Guard purchased 49 Island-class cutters, and over the course of their construction made several modifications. The ships are grouped into A, B, and C classes depending on their design. Liberty is a B-class ship and thus has heavier bow plating to prevent hull cracking in heavy seas, among other enhancements. [3]

Liberty is powered two Paxman Valenta 16 CM Diesel engines which drive two 5-blade propellers. She has two 99 kilowatts (135 PS; 133 shp) Caterpillar 3304T diesel generators for electrical power. Her hull is constructed from high-strength steel, and her superstructure and main deck are constructed from aluminium. [4] Stern flaps were retrofitted to reduce hull friction and increase speed and full efficiency. [3] Liberty has active fin stabilizers to improve her seakeeping characteristics. [4]

The Island-class patrol boats have maximum sustained speeds of 29.6 knots (54.8 km/h; 34.1 mph). They are fitted with one 25mm machine gun and two Browning .50 Caliber Machine Gun. They are equipped with satellite navigation systems, collision avoidance systems, and surface radar. They have a range of 3,380 miles (2,940 nmi; 5,440 km) at 8 knots, and an at-sea endurance of five days. [4] [5] [3]

Liberty carries one 18-foot rigid hull inflatable boat with seating for 8 crew. [6]

Liberty's complement is 2 officers and 16 enlisted crew. [7]

Liberty's namesake is Liberty Island in New York Harbor, site of the Statue of Liberty. [8]

Operational history

Liberty was commissioned on December 18, 1989. She was the 34th of the Island-class cutters. Her original cost was reported as $6.5 million. After commissioning, she was assigned to Juneau, where she moored at Auke Bay. She replaced USCGC Cape Carter at this station. [7]

Her primary missions are law enforcement, fisheries management, search and rescue, and oil spill response. She is credited, along with Alaska State Troopers, with the largest hash oil seizure in Alaska history. On October 30, 2007 crew from Liberty boarded the fishing vessel 819 in the Ketchikan area. They found five half-pint jars of the drug with a street value between $40,000 and $50,000. [9]

The United States and Canada disagree on the location of the maritime border in Dixon Entrance. This led to a series of seizures of Canadian fishing boats by Liberty in the disputed waters. Diane S. was fishing 400 yards into U.S. waters when she was seized on July 20, 1991. [10] Eliza Joye was seized on July 29, 1991. [11] . Serene was seized 875 yards north of the border claimed by the U.S. on July 20, 1992. [12] A 1990 agreement between the two countries reduced fishing conflicts and Liberty's seizures of Canadian boats when it became effective in 1992. [13] While the conflict with Canada has faded, Liberty continues to board U.S.-flagged fishing boats to enforce fishing and safety regulations. In the summer of 2018, for instance, Liberty's boardings found five vessels in violation of various regulations. [14]

USCGC Liberty evacuating passengers from grounded Empress of the North, May 15, 2007 Empress Of The North with USCGC Liberty.jpg
USCGC Liberty evacuating passengers from grounded Empress of the North, May 15, 2007

Liberty has been involved in many search and rescue missions. Often they consist of assisting fishing vessels with mechanical problems. For example, in September 2001 Liberty rescued five crewmen from the fishing vessel Baranof Queen which had been disabled off Cape Spencer. [15] In other instances, the distressed vessel was wrecked. After the 38-foot (11.6 m) salmon-fishing vessel Belle-Tech was wrecked on the Gilanta Rocks ( 54°51′00″N130°56′30″W / 54.85000°N 130.94167°W / 54.85000; -130.94167 (Gilanta Rocks) ) in Dixon Entrance on July 19, 1999, Liberty rescued her crew of two, which had abandoned ship in a small boat. [16] Liberty took eight people off the beached charter yacht Alaskan Song in 2001. [17] Sometimes her searches were for a single person in a canoe. [18] On a few occasions, however, Liberty was dispatched on rescue missions involving dozens or hundreds of people. At approximately 12:35 am on May 15, 2007 the sternwheel cruise ship Empress of the North went aground on Hanus Reef at the eastern entrance of Icy Strait. She had 281 passengers and crew aboard. While her outer hull was pierced by a rock, the inner hull was intact and pumps were able to keep up with the flooding. [19] Liberty, the ferry Columbia , and a number of nearby fishing boats responded. Liberty took off about 130 passengers and transferred them to Columbia. [20] Private vessels evacuated the remaining passengers and most were transferred to the ferry. All the passengers were off the stricken vessel by about 5:30 am. Columbia arrived in Juneau at 11 am with the passengers while Liberty remained with Empress of the North. The grounded ship was able to refloat and make its way to Auke Bay under its own power, escorted by Liberty. [21]

In July 2008 Liberty responded to another grounded cruise ship, Spirit of Glacier Bay . She ran onto a sand bar at the head of Tarr Inlet in Glacier Bay National Park. Her passengers were evacuated by park vessels before Liberty arrived. When the high tide refloated the cruise liner, Liberty escorted her to port in case further assistance was required. [22] Liberty had assisted another disabled cruise liner, Spirit of Columbia, owned by the same company, Cruise West, as Spirit of Glacier Bay, just two months before. [23]

Liberty has been awarded the meritorious unit commendation. [24]

Replacement plans

As early as the mid-2000s the mechanical reliability of the aging Island-class ships became an issue. [6] The Coast Guard began retiring Island-class cutters in 2012, replacing them with Sentinel-class fast-response cutters. [5] In 2018 Juneau city officials believed that Liberty would be decommissioned in 2023 and advocated with the Coast Guard that Liberty should be replaced by a fast response cutter home-ported at Auke Bay. [25] In reply to an inquiry from a U.S. Senator in April 2018, the commandant of the Coast Guard indicated that the service planned to replace Liberty with a coastal patrol boat rather than a fast response cutter. [26] Indeed, that is exactly what happened in 2022 when USCGC Reef Shark , a Marine Protector-class patrol boat, was assigned to Juneau. Liberty was reassigned to Valdez, Alaska. [2]

Related Research Articles

Island-class patrol boat Class of cutters of the U.S. Coast Guard

The Island-class patrol boat is a class of cutters of the United States Coast Guard. 49 cutters of the class were built, of which 37 remain in commission. Their hull numbers are WPB-1301 through WPB-1349.

USCGC <i>Acushnet</i> (WMEC-167) United States Coast Guard cutter

USCGC Acushnet (WMEC-167) was a cutter of the United States Coast Guard, homeported in Ketchikan, Alaska. She was originally USS Shackle (ARS-9), a Diver-class rescue and salvage ship commissioned by the United States Navy for service in World War II. She was responsible for coming to the aid of stricken vessels and received three battle stars during World War II, before a long career with the Coast Guard. Acushnet patrolled the waters of the North Pacific and was one of the last World War II era ships on active duty in the US fleet upon her retirement in 2011.

SS <i>Princess Sophia</i>

SS Princess Sophia was a steel-built passenger liner in the coastal service fleet of the Canadian Pacific Railway (CPR). Along with SS Princess Adelaide, SS Princess Alice, and SS Princess Mary, Princess Sophia was one of four similar ships built for CPR during 1910-1911.

USCGC <i>Matagorda</i> (WPB-1303)

USCGC Matagorda (WPB-1303) is an Island-class patrol boat of the United States Coast Guard. She was commissioned 24 April 1986. Matagorda was one of eight of the 110-foot cutters to be modified under the Integrated Deepwater System Program aka. "Deepwater" to 123-foot. She was taken out of service about December 2006 due to problems with the Deepwater conversion.

USCGC <i>Spar</i> (WLB-206)

USCGC Spar (WLB-206) is a United States Coast Guard Juniper-class seagoing buoy tender home-ported in Duluth, Minnesota. The ship maintains aids to navigation in the Twin Ports and Great Lakes.

USCGC <i>Maple</i>

USCGC Maple (WLB-207) is a Juniper-class seagoing buoy tender operated by the United States Coast Guard. She was based at Sitka, Alaska for 16 years and is currently homeported at Atlantic Beach, North Carolina. Her primary mission is maintaining aids to navigation, but she also supports search and rescue, law enforcement, oil spill response, and other Coast Guard missions.

USCGC <i>Cape Henlopen</i> Type "C" Cape-class coast guard cutter

USCGC Cape Henlopen was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.

USCGC <i>Knight Island</i>

USCGC Knight Island (WPB-1348) receives her namesake from the Knight Island in the Prince William Sounds of Alaska. Knight Island was commissioned on April 22, 1992, at Bollinger Shipyards in Lockport, Louisiana. Knight Island and the other 48 Island class cutter’s construction are based on the internationally known Vosper-Thornycroft design. Her hull is a semi-displacement type monohull made of high strength steel, while the main deck and superstructure are aluminum. Knight Island employs an active fin stabilization system to improve her sea keeping abilities. With a top speed in excess of 30 knots and a cruising speed of 26 knots, the ship is capable of enduring unsupported operations for six days and accommodates two officers and sixteen enlisted personnel.

USCGC Clover WAGL/WLB/WMEC-292, a Cactus (A) Class buoy tender was built by Marine Iron and Shipbuilding, Duluth, Minnesota. Her keel was laid 3 December 1941, and she was launched 25 April 1942. She was commissioned on 8 November 1942 in the United States Coast Guard as the United States Coast Guard Cutter Clover. She was built as a WAGL, redesignated a WLB in 1965, and again redesignated a WMEC in 1979.

USCGC <i>Sorrel</i> (WLB-296)

USCGC Sorrel (WAGL/WLB-296) was a Cactus (A) class buoy tender of the United States Coast Guard built by Zenith Dredge of Duluth, Minnesota. Her keel was laid 26 May 1942, launched 28 September 1942 and commissioned on 15 April 1943.

USCGC <i>Anacapa</i> U.S. Coast Guard patrol boat

USCGC Anacapa (WPB-1335) is an Island-class cutter of the United States Coast Guard. She is based at Petersburg, Alaska and is responsible for law enforcement, search and rescue, and maritime defense.

USCGC Cape Horn was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.

USCGC Cape Darby was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.

USCGC <i>Roanoke Island</i> US Coast Guard ship

The USCGC Roanoke Island is the 46th Island class cutter to be commissioned. She was commissioned in Homer, Alaska, on February 7, 1992. Five other Island Class cutters are based in Alaska. Her primary missions include "search and rescue, fisheries enforcement and homeland security."

USCGC <i>Sapelo</i> (WPB-1314)

The USCGC Sapelo (WPB-1314) is an Island class cutter, operated by the United States Coast Guard. In 2013, unlike other Island class cutters, she was not commanded by a commissioned officer, she was commanded by a Chief Warrant Officer.

USCGC <i>John F. McCormick</i> Sentinel-class cutter of the United States Coast Guard

USCGC John McCormick (WPC-1121) is the United States Coast Guard's 21st Sentinel-class cutter, and the first to be stationed in Alaska, where homeported at Coast Guard Base Ketchikan.

USLHT <i>Cedar</i>

USLHT Cedar was a lighthouse tender in commission in the fleet of the United States Lighthouse Service in 1917 and from 1919 to 1939, and – as USCGC Cedar (WAGL-207) – in the fleet of the United States Coast Guard from 1939 to 1950. She was in commissioned service in the United States Navy as the patrol vessel USS Cedar from 1917 to 1919 during and in the immediate aftermath of World War I. She also saw service in World War II under U.S. Navy control while in the Coast Guard fleet. She spent her career in the Pacific Northwest and the Territory of Alaska.

USCGC <i>Sweetbrier</i> (WLB-405)

The USCGC Sweetbrier (WAGL-405/WLB-405) was an Iris-class 180-foot seagoing buoy tender operated by the United States Coast Guard. She served in the Pacific during World War II. Her entire post-war career with the Coast Guard was spent in Alaska. After she was decommissioned in 2001, she was transferred to the Ghana Navy and renamed Bonsu. She is still active.

USCGC <i>Terrapin</i> United States Coast Guard ship

USCGC Terrapin (WPB-87366) is a United States Coast Guard ship of the Marine Protector class. She is assigned to Coast Guard District 13 and is home-ported at Bellingham, Washington. Her main areas of responsibility are the San Juan Islands, the Strait of Juan de Fuca, and Puget Sound. Her missions include search and rescue, law enforcement, and homeland security.

USCGC <i>Reef Shark</i> U. S. Coast Guard patrol boat

USCGC Reef Shark is the 69th Marine Protector-class coastal patrol boat to be built. Her home port is Juneau, Alaska, where she is moored in Auke Bay.

References

  1. ↑ "WINNER ANNOUNCEMENT – 2016 Hopley Yeaton Cutter Excellence and Superior Cutterman Awards – National Cuttermen Chapter". chapter.navysna.org. Retrieved 2020-06-15.
  2. 1 2 Segall, Peter (May 26, 2022). "After 33 years in Juneau, Coast Guard cutter gets a new home". Juneau Empire.
  3. 1 2 3 "WPB 110' Island Class". Global Security.
  4. 1 2 3 "USCG 110' "Island Class" Patrol Boats (WPB) | Bollinger Shipyards". www.bollingershipyards.com. Retrieved 2020-06-17.
  5. 1 2 The Cutters, Boats, and Aircraft of the U.S. Coast Guard (PDF). U.S. Coast Guard. 2018. pp. 142–143.
  6. 1 2 Legacy Vessels' Declining Conditions Reinforce Need for More Realistic Operational Targets (PDF). Washington, D.C.: GAO. 2012.
  7. 1 2 "Coast Guard Cutter Liberty to celebrate 20th anniversary in Southeast Alaska | Coast Guard News" . Retrieved 2020-06-15.
  8. ↑ "Coast Guard Commissions New 110' Cutter, Liberty". Daily Sitka Sentinel. December 1989.
  9. ↑ "SitNews: Largest "hash oil" seizure on record in Alaska made in Ketchikan area". www.sitnews.us. Retrieved 2020-06-16.
  10. ↑ "U.S. seizes fishing boat". Journal Times. July 30, 1991.
  11. ↑ Eggerston, Laura (August 1, 1991). "Pact may resolve fishing disputes in B.C., Alaska". Whitehorse Daily Star.
  12. ↑ "Coast Guard Seizes Ship". Daily Sitka Sentinel. July 22, 1992.
  13. ↑ "AGREEMENT BETWEEN THE GOVERNMENT OF THE UNITED STATES OF AMERICA AND THE GOVERNMENT OF CANADA ON FISHERIES ENFORCEMENT" (PDF). September 26, 1990.
  14. ↑ Yang, LCDR Yvonne (2018). 17th Coast Guard District Enforcement Report (PDF). Juneau, Alaska: U.S. Coast Guard. pp. 23–24.
  15. ↑ "Coast Guard rescues crew of Seattle fishing boat". Longview Daily News. September 11, 2001.
  16. ↑ alaskashipwreck.com Alaska Shipwrecks (B)
  17. ↑ "Chartered Yacht Strikes Rock In Chatham Strait; No Injuries". Sitka Daily Sentinel. May 25, 2001.
  18. ↑ "CG Searches For Missions Canoer". Sitka Daily Sentinel. June 30, 2009.
  19. ↑ "291 rescued after paddlewheeler hits rock in Alaska". The Province. May 15, 2007.
  20. ↑ "Cruise Ship Runs Aground, Passengers Evacuate". Stevens Point Journal. May 15, 2007.
  21. ↑ "SitNews: Cruise Ship Empress of the North Runs Aground". www.sitnews.us. Retrieved 2020-06-16.
  22. ↑ Cruise Ship Spirit of Glacier Bay Grounding. ALASKA DEPARTMENT OF ENVIRONMENTAL CONSERVATION. 2008.
  23. ↑ "Crippled Ship Gets To Juneau". Sitka Daily Sentinel. May 12, 2008.
  24. ↑ Coast Guard Military Medals and Awards Manual (PDF). Washington, D.C.: U.S. Coast Guard. 2016.
  25. ↑ McCarthy, Alex (2018-01-20). "City officials hope to bring Fast Response Cutter to capital city". Juneau Empire. Retrieved 2020-06-18.
  26. ↑ Zukunft, Admiral Paul F. (2018). letter to Senator Dan Sullivan (PDF).
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.