Valmet Sniper M86

Last updated
Valmet Sniper M86
Valmet m86 sniper.jpg
Valmet Sniper M86
Type Sniper rifle
Place of originFinland
Production history
Designer Valmet
Designed1984-1986
Manufacturer Valmet
Produced1987
No. built~200
VariantsSniper rifle
Target rifle
Hunting rifle
Specifications
Mass5.7 kg (without scope)
Length1210 mm
Barrel  length720 mm
Height170 mm
Cartridge .308 Winchester
7.62×53mmR (prototype only)
Action Bolt action, 60° rotating bolt, three locking lugs [1]
Muzzle velocity 760 m/s
Effective firing range800 m
Feed system5 or 9-round (.308 version);
20-round (7.62×53R version)
detachable double stack box magazine
SightsDay or night optics, aperture sights for target shooting.

The Valmet Sniper M86 (also Valmet M86 Sniper and Valmet Sniper) is a Finnish sniper rifle designed by the former Finnish state firearms company Valmet. The rifle was Valmet's first and only proper sniper rifle, and after the merger with Sako in 1986, its development work was the basis for the Sako TRG sniper rifles. [2] The rifle was produced only in small numbers in 1987 due to the merger. [3]

Contents

History

Valmet and the Finnish Defence Forces (FDF) had attempted to develop a semi-automatic sniper rifle, whose prototype name was Valmet TAK, during the 1970s on the basis of the Valmet RK 71 assault rifle. [4] : 112  The prototypes however weren't satisfactory and the project was shelved as a failure, although Valmet incorporated some improvements developed from the experiences of the TAK project to their rifles. [4] : 112  In the early 1980s the FDF was again looking for new sniper rifles in the FDF proprietary 7.62×53mmR cartridge, to replace the older Finnish M28 Mosin-Nagant based sniper rifles, whose latest model M28-76 was employed as a stopgap measure following the failure of the TAK. [4] : 113  In 1982 FDF came to the conclusion that no commercial rifle in the Finnish market is suitable as a 7.62×53R military sniper rifle without distinct modifications to the action, [4] : 114  and competing Finnish major firearms companies Sako and Tikkakoski (which was owned by Sako) weren't interested in developing a sniper rifle, especially not using the 7.62×53R cartridge. [2] The tight production schedule laid out by the Finnish Defence Forces for the new sniper rifle programme led to them using once again the venerable Mosin-Nagant construction, albeit heavily modified, in the TKIV 85, which was assembled at Asevarikko 1 ('Arsenal 1') in Kuopio, with major input and parts production from Valmet. [4] : 114 

Valmet started also designing a proper sniper rifle completely from scratch on their own, which was also recommended by a FDF HQ major Kari Aro. [3] The initial setting was to produce a 7.62×53R sniper rifle; also .300 Winchester Magnum and other magnum options were planned to increase the effective range of the rifle, but since the initial aim was to produce a rifle which FDF could use, the initial development was centered on the 7.62×53R. [3] Creating a magazine for the 7.62×53R was problematic, and Valmet opted for using a modified Lahti-Saloranta M/26 magazine for the 7.62×53R version. [3]

The trial rifle turned out very accurate, and a small batch was manufactured for the civilian market before the merger of Sako and Valmet. The produced rifles however didn't yet incorporate all of the features developed during the development, such as the multi-calibre rifle patent (Finnish patent № 72807), which featured an aluminium bedding block (chassis) to which barrelled actions of different calibres could then be quickly changed. [3] The produced rifle was meant to be a military sniper rifle in many of its features. [3]

The idea for the multi-calibre rifle was later used by a small Finnish firearms company Pirkan Ase to develop their Lynx TD12 and TD15 rifles, as well as a modification to Sako 85. Sako also took up a similar design based on the patent №72807 for production in their Sako M85 Exige. [5]

Design

The main design of the rifle features a forged receiver, to which a 60° rotating, three-lug bolt locks. [3] The bolt face is big enough to use large rimmed cartridges such as 7.62×53mmR, [3] and it can be disassembled without tools; at the rear of the bolt there is also a cocking indicator. [1] The 720 mm cold hammer forged steel barrel is chambered to .308 Winchester with four rifling grooves and a twist rate of 270 mm (1:11"), and is threaded to the receiver. [3] Complete length of the rifle is 1210 mm and height 170 mm without scope. [3] Valmet guaranteed a 0.7 MOA accuracy for the rifle at 100 metres and 1.0 MOA at 500 metres. [1]

The two-stage trigger mechanism is derived from Valmet Suomen Leijona target/competition rifles, and is adjustable between 0.7 and 2.0 kg (7 and 20 N) force. Both stages and trigger position are adjustable. [3]

The production rifle had both wooden and fibreglass stocks available, with spacers to adjust length of pull, stock height and a fully adjustable cheek piece. The wooden or fibreglass stock attaches to an internal aluminium bedding block, which in turn attaches to the receiver, removing the need to use any specific bedding mass to bed the stock to the receiver. The cheek piece of the sniper variant is quickly adjustable, while the hunting variant has tool-adjustable screws. The stock has aluminium UIT rails on the underside and on the left side, to which a sling mount attaches; the hunting variant features lightening cuts on the front end of the stock. [1] The magazine well is absent in the competition variant.

The magazine in the .308 production rifles is a 5 or 9 round double-stack staggered-feed box magazine. However, the competition variant doesn't feature a magazine.

A bipod with adjustable cant, traverse and tilt attaches to the ultimate front end of the stock, and folds to the underside of the stock when not in use. [3]

The scope mount made by Valmet attaches to a dovetail section on the receiver. [1]

The sniper version features a single chamber muzzle brake; this type of a muzzle brake was also tested on the TKIV 85 prototype rifles. The hunting version has a bare muzzle.

Variants

See also

Related Research Articles

IMI Galil Family of Israeli automatic rifles

The IMI Galil is a family of Israeli-made automatic rifles chambered for the 5.56×45mm NATO or 7.62×51mm NATO cartridges. Originally designed by Yisrael Galili and Yakov Lior in the late 1960s, the Galil was first produced by the state-owned Israel Military Industries and are now exported by the privatized Israel Weapon Industries.

Mosin–Nagant Five-shot, bolt-action military rifle

The 3-line rifle M1891, colloquially known in the West as Mosin–Nagant and in Russia and former Soviet Union as Mosin's rifle, is a five-shot, bolt-action, internal magazine–fed military rifle. It is primarily found chambered for its original 7.62×54mmR cartridge.

RK 62 Assault rifle

The RK 62, officially 7.62 RK 62 and commercially M62, is an assault rifle manufactured by Valmet and Sako. It is the standard issue infantry weapon of the Finnish Defence Forces.

Dragunov sniper rifle Designated marksman rifle

The Dragunov sniper rifle is a semi-automatic designated marksman rifle chambered in 7.62×54mmR and developed in the Soviet Union.

Accuracy International Arctic Warfare Sniper rifle

The Accuracy International Arctic Warfare rifle is a bolt-action sniper rifle designed and manufactured by the British company Accuracy International. It has proved popular as a civilian, police, and military rifle since its introduction in the 1980s. The rifles have some features that improve performance in very cold conditions without impairing operation in less extreme conditions.

7.62×54mmR Russian military rifle cartridge

The 7.62×54mmR is a rimmed rifle cartridge developed by the Russian Empire and introduced as a service cartridge in 1891. Originally designed for the bolt-action Mosin–Nagant rifle, it was used during the late tsarist era and throughout the Soviet period to the present day. The cartridge remains one of the few standard-issue rimmed cartridges still in military use, and has one of the longest service lives of any military-issued cartridge.

SAKO Finnish firearm manufacturer

SAKO, Limited is a Finnish firearm and ammunition manufacturer located in Riihimäki, Tavastia Proper in southern Finland. It also has owned the Tikka brand of bolt-action rifles since 1983, and is now owned by the Italian firearm holding company Beretta Holding.

The RK 95 TP, officially 7.62 RK 95 TP and commercially known as the M95, is a 7.62×39mm Finnish assault rifle adopted in relatively small numbers by the Finnish Defence Forces in the 1990s. The RK 95 TP originally featured many improvements including a fire control selector and a muzzle device that enabled the firing of rifle grenades, the attachment of a suppressor, or bayonet.

7.62 Tkiv 85 Sniper rifle

The 7.62 TKIV 85, short for 7.62 Tarkkuuskivääri 85 is a sniper rifle used by the Finnish Defence Forces.

Bor rifle Sniper rifle

The Bor is a Polish bolt-action 7.62×51mm NATO and .338 Lapua Magnum caliber sniper rifle. The weapon received the code name Alex during development, after the name of the lead designer Aleksander Leżucha, creator of the 12.7×99mm NATO Wilk anti-materiel rifle. After the development phase, the rifle received the military designation 'Bor'.

SV-98 Sniper rifle

The SV-98 is a Russian bolt-action sniper rifle designed by Vladimir Stronskiy. In 2003 special operations troops were armed with the 7.62 mm 6S11 sniper system comprising the SV-98 sniper rifle and 7N14 sniper enhanced penetration round. The rifle has been used in combat during operations in Chechnya.

The Sako TRG is a bolt-action sniper rifle line designed and manufactured by the Finnish firearms manufacturer, SAKO of Riihimäki. The TRG-21 and TRG-22 are designed to fire standard .308 Winchester sized cartridges, while the TRG-41 and TRG-42 are designed to fire more powerful and dimensionally larger .300 Winchester Magnum (7.62×67mm) and .338 Lapua Magnum (8.6×70mm) cartridges. They are available with olive drab green, desert tan/coyote brown, dark earth or black stocks, and are also available with a folding stock.

KK 62 Light machine gun

The KK 62, officially 7.62 KK 62 and colloquially KVKK or KVKK 62, is a Finnish 7.62×39mm light machine gun designed in late 1950s with the first prototype ready for testing in 1960. It was officially adopted as the standard infantry support weapon of the Finnish Defence Forces (FDF) in 1962 as the 7.62 konekivääri 62; the first weapons were delivered in 1966. It remains in service, although a replacement has already entered use, namely the PKM general-purpose machine gun.

Brügger & Thomet APR Sniper rifle

The APR is family of Swiss bolt-action sniper rifles designed in 2003 as a further evolution of the French PGM Précision rifles by the Thun-based Brügger & Thomet company.

Tikkakoski (company)

Oy Tikkakoski Ab was a Finnish company producing firearms and different consumer durables, most notably sewing machines. It was named after the Tikkakoski district in Jyväskylä, Central Finland where their factory was located. Their most known products were sold under the Tikka brand, which was purchased by SAKO in 1983.

FFV 890 Assault rifle

The FFV 890 was a Swedish assault rifle manufactured and designed by Försvarets Fabriksverk. The FFV 890 was based on the Israeli IMI Galil through a manufacturing licence, which in turn was based on the Finnish Valmet RK 62 and ultimately the Soviet AK-47. The FFV 890 was designed between 1975 and 1980, and its final iteration, FFV 890C, competed in the Swedish Armed Forces trials for the new 5.56×45mm NATO assault rifle, where it ended up as a runner-up to the FN FNC, which was then chosen as the Ak 5. The FFV 890C was never widely adopted by any service, though some rifles were used by the Swedish police.

The Tikka M55 is a Finnish rifle designed by a Finnish firearms company Tikkakoski in 1967–1968. M55 was the first centerfire rifle action designed by Tikkakoski, and it was manufactured from 1968 to 1989. Tikkakoski also developed a long action rifle based on the M55, called Tikka M65. The Tikka M55 was imported to the United States by Ithaca Gun Company.

Tikka M65 Finnish rifle

The Tikka M65 is a Finnish rifle designed by a Finnish firearms company Tikkakoski in 1969. It was designed as a long action rifle on the basis of the short action Tikka M55 rifle, however its action differs much from the M55. Like the Tikka M55, the M65 was imported to the United States by Ithaca Gun Company.

RK 71 Finnish assault rifle

The RK 71, commercially M71, is a Finnish assault rifle designed and manufactured by Valmet. It is based on the RK 62, which in turn is based on the Soviet AK-47. Finnish Defence Forces tested the 7.62 RK 71 between 1971 and 1973 as a possible replacement of the RK 62, but logistics issues prevented its larger adoption by FDF. The rifle was also exported to Qatar.

The Sako S20 is a bolt-action rifle designed and manufactured by a Finnish firearms company Sako since 2020. The rifle features an aluminium chassis, which allows for modularity and different configurations, due to which Sako calls it a hybrid rifle.

References

  1. 1 2 3 4 5 Hyytinen, Timo (2006). Arma Fennica VIII: Vanhat aseet 3 (1970-1993) (in Finnish). Arma Fennica Oy. pp. 292–294. ISBN   978-951-98371-9-2.
  2. 1 2 3 Hyytinen, Timo (2001). Asesuunnittelua Suomessa (in Finnish). Arma Fennica Oy. pp. 142–144. ISBN   978-951-97543-3-8.
  3. 1 2 3 4 5 6 7 8 9 10 11 12 Hyytinen, Timo (2015). VKT- ja Valmet-kiväärit: Suomen Leijonasta Petraan (in Finnish). Arma Fennica Oy. pp. 86–89. ISBN   978-952-5687-35-4.
  4. 1 2 3 4 5 Palokangas, Markku (1991). Sotilaskäsiaseet Suomessa 1918-1988. II osa: Suomalaiset aseet (in Finnish). Suomen Asehistoriallinen Seura ry. ISBN   978-951-25-0518-0.
  5. ↑ "MAO:557/18 Lynx Rifles Oy vs Sako Oy". markkinaoikeus.fi (in Finnish). Market Court (Finland). 13 November 2018. Archived from the original on 29 August 2019. Retrieved 29 August 2019.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.