Walther CCP

Last updated
Walther CCP
Walther-CCP.jpg
Type Semi-automatic pistol
Place of originGermany
Production history
Manufacturer Carl Walther GmbH Sportwaffen
Produced2014–present
Specifications
Mass633  g (22.3  oz)
Length163  mm (6.4  in)
Barrel  length90 mm (3.5 in)
Width30 mm (1.2 in)
Height130 mm (5.1 in)

Cartridge 9×19mm Parabellum,
.380 ACP (CCP M2 380)
Action Gas-delayed blowback
Feed system8-round detachable box magazine
SightsInterchangeable front sights,Adjustable rear polymer sight

The Walther CCP (Concealed Carry Pistol) is a delayed blowback semi-automatic pistol developed by Carl Walther Sportwaffen for the concealed carry civilian market.

Contents

Product evolution

The Walther CCP was introduced in March 2014. [1] It is available chambered in 9×19mm Parabellum. [2] [3]

In September 2018 Walther introduced the updated CCP M2 onto the market. Its most significant upgrade was a take-down lever that eased the field stripping, which was often cited as original M1 design's biggest shortcoming. [4] [5] [6]

Circa January 2019, Walther introduced the CCP M2 380, a variant with .380 ACP a caliber option. The CCP M2 380 became available to markets in January 2020. [7] [8] [9]

Design details

The Walther CCP is operated by a gas-delayed blowback system, using gas pressure from the ignited cartridge by directing it through a small port in the barrel in front of the chamber to slow down and delay the rearward motion of the slide. This design is nearly identical to the design of the Heckler & Koch P7. Walther calls this system Softcoil. Unlike the Walther P99 or Walther PPQ, the CCP has a slim manual thumb safety. There is an additional internal safety that acts as a firing pin block. The ergonomic grip is a shorter version of the PPQ's grip. [1] The capacity of the magazine is 8 rounds. The CCP has an overall length of 6.41 inches (163 mm) , its width is 1.18 inches (30 mm) and its height is 5.1 inches (130 mm). The length of the barrel is 3.54 inches (90 mm). Considering the CCP's size, the 5.5-pound-force (24 N) trigger pull and the 0.27-inch (6.9 mm) trigger travel are relatively high. [1]

Field stripping of the original CCP design (M1), required a special disassembly tool, while the revised CCP/M2 features a takedown lever for tool-less disassembly. [10] [11]

Walther has prepared a list of "test" ammunition and suggested grip instructions for best function, available to owners of the pistol upon request.[ citation needed ]

Disassembled Walther CCP M2 Walther-CCP-disassembled.jpg
Disassembled Walther CCP M2

Recall

In March 2017, Walther issued a recall notice on all CCP pistols, because of what they call a potential condition in the CCP that can cause the firearm, if dropped, [12] to discharge regardless of the manual safety being engaged or disengaged. Walther has issued a voluntary recall as a result and will be upgrading all affected CCPs in order to remove the risk of a drop-fire.

See also

Related Research Articles

Carl Walther GmbH Sportwaffen, or simply known as Walther, is a German firearm manufacturer, and a subsidiary of the PW Group. Founded by Carl Walther in 1886, the company has manufactured firearms and air guns at its facility in Germany for more than 100 years. Walther Arms, Inc. is the United States Walther business unit and is based in Fort Smith, Arkansas.

<span class="mw-page-title-main">.380 ACP</span> Pistol cartridge designed by John Moses Browning

The .380 ACP, is a rimless, straight-walled pistol cartridge developed by firearms designer John Moses Browning. The cartridge headspaces on the mouth of the case. It was introduced in 1908 by Colt, for use in its new Colt Model 1908 pocket hammerless semi-automatic, and has been a popular self-defense cartridge ever since, seeing wide use in numerous handguns. Other names for .380 ACP include .380 Auto, 9×17mm, 9mm Browning, 9mm Corto, 9mm Kurz, 9mm Short, and 9mm Browning Court. It should not be confused with .38 ACP. The .380 ACP does not strictly conform to cartridge naming conventions, named after the diameter of the bullet, as the actual bullet diameter of the .380 ACP is .355 inches.

<span class="mw-page-title-main">Walther P99</span> Semi-automatic pistol

The Walther P99 is a semi-automatic pistol developed by the German company Carl Walther GmbH Sportwaffen of Ulm for law enforcement, security forces and the civilian shooting market as a replacement for the Walther P5 and the P88. The P99 and its variants are also made under licence by Fabryka Broni Radom.

<span class="mw-page-title-main">Beretta Cheetah</span> Type of semi-automatic pistol

The Beretta Cheetah, also known by its original model name of "Series 81", or "80 Series", is a line of compact blowback operated semi-automatic pistols designed and manufactured by Beretta of Italy. They were introduced in 1976 and include models in .32 ACP, .380 ACP and .22 LR. Production paused in 2017, but Beretta revived the marque in 2023 with the release of the 80X.

<span class="mw-page-title-main">.32 ACP</span> Pistol cartridge designed by John Moses Browning

.32 ACP is a centerfire pistol cartridge. It is a semi-rimmed, straight-walled cartridge developed by firearms designer John Browning, initially for use in the FN M1900 semi-automatic pistol. It was introduced in 1899 by Fabrique Nationale, and is also known as the 7.65 mm Browning Short.

<span class="mw-page-title-main">Walther PP</span> Semi-automatic pistol

The Walther PP series pistols are blowback-operated semi-automatic pistols, developed by the German arms manufacturer Carl Walther GmbH Sportwaffen.

<span class="mw-page-title-main">Heckler & Koch USP</span> Semi-automatic pistol

The USP is a semi-automatic pistol developed in Germany by Heckler & Koch GmbH (H&K) as a replacement for the P7 series of handguns.

<span class="mw-page-title-main">Heckler & Koch P7</span> Semi-automatic pistol

The Heckler & KochP7 is a German 9×19mm semi-automatic pistol designed by Helmut Weldle and produced from 1979 to 2008 by Heckler & Koch GmbH (H&K). The P7M13, a variant of the P7 with a double-stack magazine, was produced until 2000.

<span class="mw-page-title-main">Heckler & Koch HK4</span> Semi-automatic pistol

The HK4 is a pocket pistol, first introduced by Heckler & Koch in either 1964 or 1967. It was distinctive for allowing shooters to swap barrels chambered for different cartridges without tools and for having a durable but light hard-anodized aluminum-alloy frame.

<span class="mw-page-title-main">Pocket pistol</span> Term for a small, pocket-sized semi-automatic pistol

In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or a similar small space.

<span class="mw-page-title-main">Smith & Wesson M&P</span> Semi-automatic pistol

The Smith & Wesson M&P is a polymer-framed, short recoil operated, locked breech semi-automatic pistol introduced in the summer of 2005 by the American company Smith & Wesson. It uses a Browning-type locking system. While targeted at law enforcement agencies, the M&P is also widely available on the commercial market.

<span class="mw-page-title-main">SIG Sauer P230</span> Semi-automatic pistol

The SIG Sauer P230 is a small, semi-automatic handgun chambered in .32 ACP or .380 Auto. It was designed by SIG Sauer of Eckernförde, Germany. It was imported into the United States by SIGARMS in 1985. In 1996 it was replaced by the model P232.

<span class="mw-page-title-main">Walther PPS</span> Semi-automatic pistol

The Walther PPS is a semi-automatic pistol developed by the German company Carl Walther GmbH Sportwaffen of Ulm for concealed carry for civilians and plainclothes law enforcement personnel. It is available in either 9×19mm Parabellum or .40 S&W chamberings. It was first shown in 2007 at the IWA & OutdoorClassics and is a slim polymer framed weapon of similar size to the Walther PPK pistol. The PPS is however technically much more based on the Walther P99 pistol.

<span class="mw-page-title-main">Bond Arms</span> Texas gun manufacturer

Bond Arms Inc. is an American firearms manufacturer located in Granbury, Texas which makes derringers, the semi-automatic Bullpup9 pistol, and will soon be putting a tactical lever-action rifle into production by the end of 2023.

Llama Firearms, officially known as Llama-Gabilondo y Cia SA, was a Spanish arms company founded in 1904 under the name Gabilondo and Urresti. Its headquarters were in Eibar in the Basque Country, Spain, but they also had workshops during different times in Elgoibar and Vitoria. The company manufactured moderate-priced revolvers and self-chambering pistols in a wide variety of models. These were popular mainly in the European and Latin American export market, as well as domestically in Spain.

<span class="mw-page-title-main">Taurus Millennium series</span> Semi-automatic pistol

The Taurus Millennium series is a product line of double-action only (DAO) and single-action/double-action hammerless, striker-fired, short recoil operated, semi-automatic pistols manufactured by Forjas Taurus S/A in Porto Alegre Brazil. The Millennium line was designed to contend in the civilian concealed carry firearms market, and to be sold as backup weapons for law enforcement officers.

<span class="mw-page-title-main">Kevin ZP98</span> Sub-compact semi-automatic pistol

Kevin ZP98 is a 9 mm/.380 ACP sub-compact semi-automatic pistol manufactured in the Czech Republic. It is manufactured and sold in the United States by Magnum Research as the Micro Desert Eagle (ME380).

<span class="mw-page-title-main">Walther PPQ</span> Semi-automatic pistol

The Walther PPQ is a semi-automatic pistol developed by the German company Carl Walther GmbH Sportwaffen of Ulm for law enforcement, security forces and the civilian shooting market as a development of the Walther P99. It is available in 9×19mm Parabellum, 9×21mm, .40 S&W, and .45 ACP chamberings.

<span class="mw-page-title-main">Walther PPX</span> Walther semi-automatic handgun

The Walther PPX and the Walther Creed semi-automatic pistols were developed by the German company Carl Walther GmbH Sportwaffen of Ulm as low-cost duty handguns. The PPX was available in 9×19mm Parabellum and .40 S&W. Its successor, the Creed, was available only in 9mm.

<span class="mw-page-title-main">SIG Sauer P365</span> Polymer frame semi-automatic handgun

The SIG Sauer P365 is a striker-fired subcompact semi-automatic pistol manufactured by SIG Sauer, intended for everyday carry. It is offered with Tritium XRAY3 Day/Night Sights and two 10-round magazines; one flush fit and the other with an extended finger tab, and a stainless steel frame with polymer grip module. It is primarily chambered in 9×19mm Parabellum and is rated for +P ammunition while utilizing offset double-stack magazines. A variant chambered in .380 ACP was introduced in February 2022. The P365, which replaced the P290RS, is produced in Newington, New Hampshire. In both 2018 and 2019, it was the best selling handgun in the United States.

References

  1. 1 2 3 all4shooters.com Team (10 March 2014). "IWA 2014 / Neuvorstellung von WALTHER - die halbautomatische Pistole CCP in 9 x19 mm". all4shooters.com. Retrieved 8 October 2014.{{cite web}}: CS1 maint: numeric names: authors list (link)
  2. Tarr, James (8 July 2016). "Walther CCP 9mm Review". handgunsmag.com. Retrieved 16 February 2017.
  3. "Walther CCP". Walther Firearms. 2014. Retrieved 8 October 2014.
  4. "CCP M2 + | Black".
  5. Wunderlich, Glen. "Walther Introduces the CCP M2". thinkafield.org. Retrieved 26 November 2023.
  6. "Walther CCP M2 Updated and Improved". 2 August 2018.
  7. "Walther Arms CCP M2 380". 23 October 2020.
  8. "Walther CCP M2 in .380 ACP Now Shipping -". 8 January 2020.
  9. "Stout Power & Smooth Handling: NEW Walther CCP M2 .380 ACP". 9 January 2019.
  10. Shelton, Elwood (7 August 2018). "Walther CCP M2 Goes Tool-Less For Takedown". GunDigest. Retrieved 28 September 2019.
  11. Abraham, Dan (3 August 2018). "Op-Ed: First look – The improved Walther CCP M2 was just launched". American Military News. Retrieved 28 September 2019.
  12. "Walther USA CCP Recall".