X-ray crystal truncation rod

Last updated March 08, 2021

X-ray crystal truncation rod scattering is a powerful method in surface science, based on analysis of surface X-ray diffraction (SXRD) patterns from a crystalline surface.

For an infinite crystal, the diffracted pattern is concentrated in Dirac delta function like Bragg peaks. Presence of crystalline surfaces results in additional structure along so-called truncation rods (linear regions in momentum space normal to the surface). Crystal Truncation Rod (CTR) measurements allow detailed determination of atomic structure at the surface, especially useful in cases of oxidation, epitaxial growth, and adsorption studies on crystalline surfaces.

Theory

Fig. 1: Crystal Truncation Rods produced by a simple cubic lattice with ideal termination XrayCTRsimplecubic.png — Fig. 1: Crystal Truncation Rods produced by a simple cubic lattice with ideal termination

A particle incident on a crystalline surface with momentum $K_{0}$ will undergo scattering through a momentum change of $\mathbf {Q}$ . If $x$ and $y$ represent directions in the plane of the surface and $z$ is perpendicular to the surface, then the scattered intensity as a function of all possible values of $\mathbf {Q}$ is given by

I(\mathbf {Q} )={\frac {\sin ^{2}\left({\tfrac {1}{2}}N_{x}Q_{x}a_{x}\right)}{\sin ^{2}\left({\tfrac {1}{2}}Q_{x}a_{x}\right)}}\ {\frac {\sin ^{2}\left({\tfrac {1}{2}}N_{y}Q_{y}a_{y}\right)}{\sin ^{2}\left({\tfrac {1}{2}}Q_{y}a_{y}\right)}}\ {\frac {1+\alpha ^{2N_{z}}-2\alpha ^{N_{z}}\cos \left(N_{z}Q_{z}c\right)}{1+\alpha ^{2}-2\alpha \cos \left(Q_{z}c\right)}}

Where $\alpha$ is the penetration coefficient, defined as the ratio of x-ray amplitudes scattered from successive planes of atoms in the crystal, and $a_{x}$ , $a_{y}$ , and $c$ are the lattice spacings in the x, y, and z directions, respectively. ^[1]

In the case of perfect absorption, $\alpha =0$ , and the intensity becomes independent of $Q_{z}$ , with a maximum for any $\mathbf {Q_{\parallel }}$ (the component of $\mathbf {Q}$ parallel to the crystal surface) that satisfies the 2D Laue condition in reciprocal space

\mathbf {Q} _{\parallel }=\mathbf {G} _{hk}=h\mathbf {a} _{x}^{*}+k\mathbf {a} _{y}^{*}

for integers $h$ and $k$ . This condition results in rods of intensity in reciprocal space, oriented perpendicular to the surface and passing through the reciprocal lattice points of the surface, as in Fig. 1. These rods are known as diffraction rods, or crystal truncation rods.

Fig. 2: Intensity variation along a Crystal Truncation Rod from a simple cubic lattice XrayCTRrodscanGraph.png — Fig. 2: Intensity variation along a Crystal Truncation Rod from a simple cubic lattice

When $\alpha$ is allowed to vary from 0, the intensity along the rods varies according to Fig. 2. Note that in the limit as $\alpha$ approaches unity, the x-rays are fully penetrating, and the scattered intensity approaches a periodic delta function, as in bulk diffraction.

This calculation has been done according to the kinematic (single-scattering) approximation. This has been shown to be accurate to within a factor of $10^{-7}$ of the peak intensity. Adding dynamical (multiple-scattering) considerations to the model can result in even more accurate predictions of CTR intensity. ^[2]

Instrumentation

To obtain high-quality data in X-ray CTR measurements, it is desirable that the detected intensity be on the order of at least $10^{9}{\tfrac {photons}{mm^{2}s}}$ ^{[ citation needed ]}. To achieve this level of output, the X-ray source must typically be a synchrotron source. More traditional, inexpensive sources such as rotating anode sources provide 2-3 orders of magnitude less X-ray flux and are only suitable for studying high-atomic number materials, which return a higher diffracted intensity. The maximum diffracted intensity is roughly proportional to the square of the atomic number, $Z$ . ^[3] Anode X-ray sources have been successfully used to study gold ( $Z=79$ ) for example. ^[4]

When doing X-ray measurements of a surface, the sample is held in Ultra-High Vacuum and the X-rays pass into and out of the UHV chamber through Beryllium windows. There are 2 approaches to chamber and diffractometer design that are in use. In the first method, the sample is fixed relative to the vacuum chamber, which is kept as small and light as possible and mounted on the diffractometer. In the second method, the sample is rotated within the chamber by bellows coupled to the outside. This approach avoids putting a large mechanical load on the diffractometer goniometer, making it easier to maintain fine angular resolution. One drawback of many configurations is that the sample must be moved in order to use other surface analysis methods such as LEED or AES, and after moving the sample back into the X-ray diffraction position, it must be realigned. In some setups, the sample chamber can be detached from the diffractometer without breaking vacuum, allowing for other users to have access. For examples of X-ray CTR diffractometer apparatus, see refs 15-17 in ^[3]

CTR Rodscans

For a given incidence angle of X-rays onto a surface, only the intersections of the crystal truncation rods with the Ewald sphere can be observed. To measure the intensity along a CTR, the sample must be rotated in the X-ray beam so that the origin of the Ewald sphere is translated and the sphere intersects the rod at a different location in reciprocal space. Performing a rodscan in this way requires accurate coordinated motion of the sample and the detector along different axes. To achieve this motion, the sample and detector are mounted in an apparatus called a four-circle diffractometer. The sample is rotated in the plane bisecting the incoming and diffracted beam and the detector is moved into the position necessary to capture the diffracted CTR intensity.

Surface Structures

Fig. 3: Examples of (a) miscut cubic lattice and (b) ordered surface roughness, and (c,d) the corresponding CTR profiles, respectively. XrayCTRexamples.png — Fig. 3: Examples of (a) miscut cubic lattice and (b) ordered surface roughness, and (c,d) the corresponding CTR profiles, respectively.

Surface features in a material produce variations in the CTR intensity, which can be measured and used to evaluate what surface structures may be present. Two examples of this are shown in Fig. 3. In the case of a miscut at an angle $\alpha$ , a second set of rods is produced in reciprocal space called superlattice rods, tilted from the regular lattice rods by the same angle, $\alpha$ . The X-ray intensity is strongest in the region of intersection between the lattice rods (grey bars) and superlattice rods (black lines). In the case of ordered alternating steps, the CTR intensity is chopped into segments, as shown. In real materials, the occurrence of surface features will rarely be so regular, but these two examples show the way in which surface miscuts and roughness are manifested in the obtained diffraction patterns.

Related Research Articles

$Diffraction Phenomenon of the motion of waves$

Diffraction refers to various phenomena that occur when a wave encounters an obstacle or opening. It is defined as the bending of waves around the corners of an obstacle or through an aperture into the region of geometrical shadow of the obstacle/aperture. The diffracting object or aperture effectively becomes a secondary source of the propagating wave. Italian scientist Francesco Maria Grimaldi coined the word diffraction and was the first to record accurate observations of the phenomenon in 1660.

X-ray crystallography (XRC) is the experimental science determining the atomic and molecular structure of a crystal, in which the crystalline structure causes a beam of incident X-rays to diffract into many specific directions. By measuring the angles and intensities of these diffracted beams, a crystallographer can produce a three-dimensional picture of the density of electrons within the crystal. From this electron density, the mean positions of the atoms in the crystal can be determined, as well as their chemical bonds, their crystallographic disorder, and various other information.

In mechanics and geometry, the 3D rotation group, often denoted SO(3), is the group of all rotations about the origin of three-dimensional Euclidean space $under the operation of composition. By definition, a rotation about the origin is a transformation that preserves the origin, Euclidean distance, and orientation. Every non-trivial rotation is determined by its axis of rotation and its angle of rotation. Composing two rotations results in another rotation; every rotation has a unique inverse rotation; and the identity map satisfies the definition of a rotation. Owing to the above properties, the set of all rotations is a group under composition. Rotations are not commutative, making it a nonabelian group. Moreover, the rotation group has a natural structure as a manifold for which the group operations are smoothly differentiable; so it is in fact a Lie group. It is compact and has dimension 3.$

Unit quaternions, known as versors, provide a convenient mathematical notation for representing spatial orientations and rotations of elements in three dimensional space. Specifically, they encode information about an axis-angle rotation about an arbitrary axis. Rotation and orientation quaternions have applications in computer graphics, computer vision, robotics, navigation, molecular dynamics, flight dynamics, orbital mechanics of satellites and crystallographic texture analysis.

Electron diffraction refers to the wave nature of electrons. However, from a technical or practical point of view, it may be regarded as a technique used to study matter by firing electrons at a sample and observing the resulting interference pattern. This phenomenon is commonly known as wave–particle duality, which states that a particle of matter can be described as a wave. For this reason, an electron can be regarded as a wave much like sound or water waves. This technique is similar to X-ray and neutron diffraction.

A cardioid is a plane curve traced by a point on the perimeter of a circle that is rolling around a fixed circle of the same radius. It can also be defined as an epicycloid having a single cusp. It is also a type of sinusoidal spiral, and an inverse curve of the parabola with the focus as the center of inversion.

In linear algebra, a rotation matrix is a transformation matrix that is used to perform a rotation in Euclidean space. For example, using the convention below, the matrix

$Powder diffraction$

Powder diffraction is a scientific technique using X-ray, neutron, or electron diffraction on powder or microcrystalline samples for structural characterization of materials. An instrument dedicated to performing such powder measurements is called a powder diffractometer.

In physics, a Bragg plane is a plane in reciprocal space which bisects a reciprocal lattice vector, $, at right angles. The Bragg plane is defined as part of the Von Laue condition for diffraction peaks in x-ray diffraction crystallography.$

In condensed matter physics and crystallography, the static structure factor is a mathematical description of how a material scatters incident radiation. The structure factor is a critical tool in the interpretation of scattering patterns obtained in X-ray, electron and neutron diffraction experiments.

The gradient theorem, also known as the fundamental theorem of calculus for line integrals, says that a line integral through a gradient field can be evaluated by evaluating the original scalar field at the endpoints of the curve. The theorem is a generalization of the fundamental theorem of calculus to any curve in a plane or space rather than just the real line.

Angle-resolved photoemission spectroscopy (ARPES) is a powerful technique used in condensed matter physics to probe the structure of the electrons in a material, usually a crystalline solid. The technique is best suited for use in one- or two-dimensional materials. It is based on the photoelectric effect, in which an incoming photon of sufficient frequency dislodges an electron from the surface of a material. By directly measuring the kinetic energy and momentum distributions of the emitted photoelectrons, the technique can be used to map the electronic band structure, provide elemental information, and map Fermi surfaces. ARPES has been used by physicists to investigate high-temperature superconductors and materials exhibiting charge density waves.

In geometry, various formalisms exist to express a rotation in three dimensions as a mathematical transformation. In physics, this concept is applied to classical mechanics where rotational kinematics is the science of quantitative description of a purely rotational motion. The orientation of an object at a given instant is described with the same tools, as it is defined as an imaginary rotation from a reference placement in space, rather than an actually observed rotation from a previous placement in space.

In mathematics, the Struve functions $H α (x)$ , are solutions $y (x)$ of the non-homogeneous Bessel's differential equation:

$Laue equations Equations describing diffraction in a crystal lattice$

In crystallography, the Laue equations relate the incoming waves to the outgoing waves in the process of diffraction by a crystal lattice. They are named after physicist Max von Laue (1879–1960). They reduce to Bragg's law.

In celestial mechanics, a Kepler orbit is the motion of one body relative to another, as an ellipse, parabola, or hyperbola, which forms a two-dimensional orbital plane in three-dimensional space. A Kepler orbit can also form a straight line. It considers only the point-like gravitational attraction of two bodies, neglecting perturbations due to gravitational interactions with other objects, atmospheric drag, solar radiation pressure, a non-spherical central body, and so on. It is thus said to be a solution of a special case of the two-body problem, known as the Kepler problem. As a theory in classical mechanics, it also does not take into account the effects of general relativity. Keplerian orbits can be parametrized into six orbital elements in various ways.

In physics, deformation is the continuum mechanics transformation of a body from a reference configuration to a current configuration. A configuration is a set containing the positions of all particles of the body.

In crystallography, a fractional coordinate system is a coordinate system in which the edges of the unit cell are used as the basic vectors to describe the positions of atomic nuclei. The unit cell is a parallelepiped defined by the lengths of its edges $and angles between them .$

Surface-extended X-ray absorption fine structure (SEXAFS) is the surface-sensitive equivalent of the EXAFS technique. This technique involves the illumination of the sample by high-intensity X-ray beams from a synchrotron and monitoring their photoabsorption by detecting in the intensity of Auger electrons as a function of the incident photon energy. Surface sensitivity is achieved by the interpretation of data depending on the intensity of the Auger electrons instead of looking at the relative absorption of the X-rays as in the parent method, EXAFS.

In physics and engineering, the envelope of an oscillating signal is a smooth curve outlining its extremes. The envelope thus generalizes the concept of a constant amplitude into an instantaneous amplitude. The figure illustrates a modulated sine wave varying between an upper and a lower envelope. The envelope function may be a function of time, space, angle, or indeed of any variable.

References

↑ E. Conrad (1996). "Diffraction Methods". In W. N. Unertl (Ed.), Physical Structure, pp. 279-302. Amsterdam: Elsevier Science.
↑ Kaganer, Vladimir M. (2007-06-21). "Crystal truncation rods in kinematical and dynamical x-ray diffraction theories". Physical Review B. American Physical Society (APS). 75 (24): 245425. arXiv: cond-mat/0702679 . doi:10.1103/physrevb.75.245425. ISSN 1098-0121.
1 2 Feidenhans'l, R. (1989). "Surface structure determination by X-ray diffraction". Surface Science Reports. Elsevier BV. 10 (3): 105–188. doi:10.1016/0167-5729(89)90002-2. ISSN 0167-5729.
↑ Robinson, I. K. (1983-04-11). "Direct Determination of the Au(110) Reconstructed Surface by X-Ray Diffraction". Physical Review Letters. American Physical Society (APS). 50 (15): 1145–1148. doi:10.1103/physrevlett.50.1145. ISSN 0031-9007.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[Conrad-1] E. Conrad (1996). "Diffraction Methods". In W. N. Unertl (Ed.), Physical Structure, pp. 279-302. Amsterdam: Elsevier Science.

[2] Kaganer, Vladimir M. (2007-06-21). "Crystal truncation rods in kinematical and dynamical x-ray diffraction theories". Physical Review B. American Physical Society (APS). 75 (24): 245425. arXiv: cond-mat/0702679 . doi:10.1103/physrevb.75.245425. ISSN 1098-0121.

[Feidenhans-3] 1 2 Feidenhans'l, R. (1989). "Surface structure determination by X-ray diffraction". Surface Science Reports. Elsevier BV. 10 (3): 105–188. doi:10.1016/0167-5729(89)90002-2. ISSN 0167-5729.

[4] Robinson, I. K. (1983-04-11). "Direct Determination of the Au(110) Reconstructed Surface by X-Ray Diffraction". Physical Review Letters. American Physical Society (APS). 50 (15): 1145–1148. doi:10.1103/physrevlett.50.1145. ISSN 0031-9007.

[1]

[2]

[3]

[4]