Xenia (automobile)

Last updated

Xenia Cyclecar at Carillon Historical Park in Dayton, Ohio (2023) Xenia Cyclecar 2023.jpg
Xenia Cyclecar at Carillon Historical Park in Dayton, Ohio (2023)
1914 Xenia MHV Xenia 1914 02.jpg
1914 Xenia

The Xenia was an American cyclecar designed by P. E. Hawkins of Cleveland and manufactured in Xenia, Ohio in 1914. [1] The factory was Fred Baldner's machine shop, in which Baldner manufactured his own car from 1900 to 1903. [2]

The Model 14A was built with the odd combination of an epicyclic gearbox and belt final drive, and was powered by an 1164 cc vee-twin Deluxe engine. [1] The body seated two passengers in a tandem arrangement, and the car sold for $395. [1] A Xenia was driven from Ohio all the way to San Francisco without problems, while another Xenia finished first in the cyclecar races held in Columbus, Ohio in August 1914. [2]

The Hawkins Cyclecar Company went out of business in October 1914, with total production of the Xenia being approximately 25 cars. [1]

Related Research Articles

<span class="mw-page-title-main">Brass Era car</span> American term for the early period of automotive manufacturing

The Brass Era is an American term for the early period of automotive manufacturing, named for the prominent brass fittings used during this time for such features as lights and radiators. It is generally considered to encompass 1896 through 1915, a time when cars were often referred to as horseless carriages.

<span class="mw-page-title-main">Cyclecar</span> Early microcar

A cyclecar was a type of small, lightweight and inexpensive motorized car manufactured in Europe and the United States between 1910 and the early 1920s. The purpose of cyclecars was to fill a gap in the market between the motorcycle and the car. A key characteristic was that it could accommodate only two passengers sitting in tandem.

<span class="mw-page-title-main">Argo (automobile)</span> Defunct American motor vehicle manufacturer

The Argo was a short-lived United States automobile manufactured by the Argo Motor Co in Jackson, Michigan, between 1914 and 1918. Previously, the factory had been used by the Standard Electric Car Co to build an electric car.

The hawk is a predatory bird.

<span class="mw-page-title-main">Coventry Premier</span>

Coventry Premier Limited owned a British car and cyclecar manufacturing business based in Coventry from 1912 to 1923. It changed its name from Premier Cycles to Coventry Premier Ltd in November 1914.

<span class="mw-page-title-main">O-We-Go</span> Defunct American motor vehicle manufacturer

The O-We-Go was an American Cyclecar manufactured in 1914 in Owego, New York.

The Simplic was a cyclecar manufactured from 1914 to 1923 by George Wadden in Surrey, England. The first Simplic was a 4-wheeled vehicle powered by a 5/6 hp air-cooled JAP engine. Transmission was by epicyclic gear and belt final drive. Production stopped later that year due to World War I.

<span class="mw-page-title-main">Speedwell Motor Car Company</span> Defunct American motor vehicle manufacturer

The Speedwell Motor Car Company was a Brass Era American automobile manufacturing company established by Pierce Davies Schenck that produced cars from 1907 to 1914. The Great Dayton Flood of 1913 greatly damaged the Speedwell factory and inventory, and the company entered receivership in 1915 after having built an estimated 4,000 cars and trucks.

The Arrow was a cyclecar marketed as a light car manufactured in M.C. Whitmore Co, Dayton, Ohio, in 1914. The Arrow had a four-cylinder,1 ½ liter water-cooled engine, and sold for $395.

The Davis was a cyclecar manufactured in Detroit, Michigan, by the Davis Cyclecar Company in 1914. The car used a two-cylinder Spacke air-cooled engine, and featured three-speed selective transmission and a double chain drive on a 93-inch wheelbase. The Davis was similar to the French Bedelia (cyclecar) in that the driver sat in the rear seat. The tandem two-seater cost $425, but designer William Norris Davis was unable to secure the capital to undertake production. He moved to the West Coast and joined the Los Angeles Cyclecar Company.

The Detroit Cyclecar was a cyclecar manufactured in Detroit, Michigan by the Detroit Cyclecar Company from 1913 to 1914 and Saginaw, Michigan in 1914.

<span class="mw-page-title-main">Mercury Cyclecar Company</span> Defunct American motor vehicle manufacturer

The Mercury was a cyclecar built in Detroit, Michigan, by the Mercury Cyclecar Company at 807 South Scotten Street in 1913-1914.

<span class="mw-page-title-main">Partin Manufacturing Company (automobile company)</span> Defunct American motor vehicle manufacturer

The Partin Manufacturing Company was a brass era American automobile manufacturer, headquartered at 29 South LaSalle Street, Chicago, Illinois from 1913 to 1917. The Partin-Palmer automobile and Pioneer cyclecar were produced.

<span class="mw-page-title-main">Hatfield Motor Vehicle Company</span> Historical automotive manufacturer in Ohio, United States

Hatfield Motor Vehicle Company was a pioneer brass era American automobile company, built in Miamisburg, Ohio, in 1907 and 1908.

This is a chronological index for the start year for motor vehicle brands. For manufacturers that went on to produce many models, it represents the start date of the whole brand; for the others, it usually represents the date of appearance of the main model that was produced.

The Greyhound Cyclecar Company was created in 1914 in Toledo, Ohio.

<span class="mw-page-title-main">Warren-Lambert</span>

The Warren-Lambert Engineering Co. Ltd. was a British automobile manufacturer that was established from 1912 to 1922 in Richmond, then in Surrey. A. Warren Lambert, was an agent for Morgan cars in Putney which he also raced. In 1912 he designed and started to manufacture a two-seat four-wheel cyclecar from premises in Uxbridge Road, Shepherd's Bush. It was well received and around 25 cars a week were being made.

<span class="mw-page-title-main">Signet (automobile)</span> Defunct American motor vehicle manufacturer

The Signet cyclecar was the name used by Fenton Engineering Company of Fenton, Michigan from 1913 to 1914. In 1914 the name was changed to Fenton and was manufactured by the Fenton Cyclecar Company. In May 1914, The Fenton became the Koppin and was produced by the Koppin Motor Company until September 1914.

The States was a cyclecar manufactured by the States Cyclecar Company of Detroit, Michigan in 1915.

References

  1. 1 2 3 4 Georgano, Nick (2000). The Beaulieu Encyclopedia of the Automobile. London: Stationery Office. p. 1792. ISBN   0117023191.
  2. 1 2 Kimes, Beverly Rae (1996). The Standard Catalog of American Cars: 1805-1942. Iola, IA: Krause Publications. p. 1612. ISBN   0873414284.