Xerotine siccative

Last updated

Xerotine siccative was an oil drying agent used in the late 19th century. It is a type of terebene; unlike standard terebenes, xerotine siccative doesn't become cloudy when mixed in an oil. [1] Replacing boiled oil, xerotine siccative was mixed with paint in order to speed up the drying process; [1] however, its use ceased when it was discovered to be highly flammable. [2]

Contents

The dangerous qualities of xerotine siccative were first discovered in an investigation of a small explosion on HMS Cockatrice in 1881. [3] In November of the same year there was an explosion on HMS Triumph which killed three men and wounded seven more. [3]

Name

The words "xerotine" and "siccative" each mean "drier" in Greek and Latin respectively. [4] : 314 

Uses

As an oil dryer, xerotine siccative was mixed with oil based paints in order to speed the drying time of the paint. [1]

Initial investigations

The first evidence that xerotine siccative was a chief agent in the explosions of these ships[ clarification needed ] came from an investigation done on Cockatrice. It was discovered that prior to the explosion, a man entered the ship's storeroom with an open flame, which he held next to an uncorked can of xerotine siccative. [3] Harry T. Grenfell reported that xerotine siccative had been supplied to the ship as a harmless substance and as a result, no precautions were taken towards it. [5] Subsequent inquiries into an explosion aboard Triumph and HMS Doterel revealed that both resulted from explosions due to xerotine siccative. [6]

After it was revealed that Triumph exploded as a result of gas generated by xerotine siccative, W.B. Baird, carpenter of Doterel, testified that he was supplied with the agent in an earthenware jar. [5] He also stated that the painter of the ship reported that the jar had been damaged and was leaking and was ordered to dispose of the jar by throwing it overboard; shortly thereafter the explosion aboard Doterel occurred. [5]

Results

In 1883, a committee, appointed by the Lords Commissioners of the Admiralty, released a report on the explosive power of xerotine siccative. [5] Once the danger of xerotine siccative became known, the Commanders-in-Chief at the home ports and foreign stations and the Superintendents of the Dockyards were warned not to issue the substance to any future ships. [5] All ships were also required to return any quantity of xerotine siccative that they had on board. [5] At the same time, orders were given for the entire supply in store and on ships to be destroyed. [5]

The Admiralty also took steps to prevent similar events from occurring in the future. No new compound could be administered until it had been examined chemically and any explosive nature was reported. [5] Further precautions were taken in that labels stating "Inflammable—No Fire or Light to be brought near this Cask" were printed to be placed on any objects that posed a fire hazard. [5] In addition, new specifications were created for any future cask or can holding flammable liquids. [5]

After the investigations, the use of boiled oil was once again employed. [2]

Composition and flammability

Xerotine siccative contains kerosene as an ingredient. [7] The most volatile substances in xerotine siccative were found to freely evaporate between 50 and 80 degrees Fahrenheit. [7] Further, xerotine siccative contained Benzoline, which is very volatile at room temperature. [4] : 671  Benzoline is flammable when it is present at one part benzoline vapor to 60 parts air and explosive when present at one part vapor to 30 parts air. [4] : 671  On 2 October 1874, Benzoline was found to be the cause of an explosion on the canal boat Tilsbury. [4] : 671  When the fumes were contained in an enclosed space, the behavior of the gas became similar to that of coal gas and could produce a similarly violent explosion. [7]

Known explosions

Xerotine siccative was also considered as a potential cause of the explosion which sank USS Maine in Havana harbour; however, it was ruled out by a later investigation.

Related Research Articles

<span class="mw-page-title-main">Explosive</span> Substance that can explode

An explosive is a reactive substance that contains a great amount of potential energy that can produce an explosion if released suddenly, usually accompanied by the production of light, heat, sound, and pressure. An explosive charge is a measured quantity of explosive material, which may either be composed solely of one ingredient or be a mixture containing at least two substances.

<span class="mw-page-title-main">Propane</span> Hydrocarbon compound

Propane is a three-carbon alkane with the molecular formula C3H8. It is a gas at standard temperature and pressure, but compressible to a transportable liquid. A by-product of natural gas processing and petroleum refining, it is commonly used as a fuel in domestic and industrial applications and in low-emissions public transportation. Discovered in 1857 by the French chemist Marcellin Berthelot, it became commercially available in the US by 1911. Propane is one of a group of liquefied petroleum gases. The others include propylene, butane, butylene, butadiene, isobutylene, and mixtures thereof. Propane has lower volumetric energy density, but higher gravimetric energy density and burns more cleanly than gasoline and coal.

<span class="mw-page-title-main">Ammonium nitrate</span> Chemical compound with formula NH4NO3

Ammonium nitrate is a chemical compound with the formula NH4NO3. It is a white crystalline salt consisting of ions of ammonium and nitrate. It is highly soluble in water and hygroscopic as a solid, although it does not form hydrates. It is predominantly used in agriculture as a high-nitrogen fertilizer.

<span class="mw-page-title-main">Static electricity</span> Imbalance of electric charges within or on the surface of a material

Static electricity is an imbalance of electric charges within or on the surface of a material. The charge remains until it is able to move away by an electric current or electrical discharge. The word "static" is used to differentiate it from current electricity, where an electric charge flows through an electrical conductor.

An inert gas is a gas that does not readily undergo chemical reactions with other chemical substances and therefore does not readily form chemical compounds. The noble gases often do not react with many substances and were historically referred to as the inert gases. Inert gases are used generally to avoid unwanted chemical reactions degrading a sample. These undesirable chemical reactions are often oxidation and hydrolysis reactions with the oxygen and moisture in air. The term inert gas is context-dependent because several of the noble gases can be made to react under certain conditions.

<span class="mw-page-title-main">Detonation</span> Explosion at supersonic velocity

Detonation is a type of combustion involving a supersonic exothermic front accelerating through a medium that eventually drives a shock front propagating directly in front of it. Detonations propagate supersonically through shock waves with speeds in the range of 1 km/sec and differ from deflagrations which have subsonic flame speeds in the range of 1 m/sec. Detonation is an explosion of fuel-air mixture. Compared to deflagration, detonation doesn't need to have an external oxidizer. Oxidizers and fuel mix when deflagration occurs. Detonation is more destructive than deflagrations. In detonation, flame front travels through air-fuel faster than sound, while in deflagrations, flame front travels through air-fuel slower than sound

An inerting system decreases the probability of combustion of flammable materials stored in a confined space. The most common such system is a fuel tank containing a combustible liquid, such as gasoline, diesel fuel, aviation fuel, jet fuel, or rocket propellant. After being fully filled, and during use, there is a space above the fuel, called the ullage, that contains evaporated fuel mixed with air, which contains the oxygen necessary for combustion. Under the right conditions this mixture can ignite. An inerting system replaces the air with a gas that cannot support combustion, such as nitrogen.

<span class="mw-page-title-main">Boiling liquid expanding vapor explosion</span> Explosion of a vessel containing liquid above boiling point

A boiling liquid expanding vapor explosion is an explosion caused by the rupture of a vessel containing a pressurized liquid that has reached a temperature above its boiling point. Because the boiling point of a liquid rises with pressure, the contents of the pressurized vessel can remain a liquid as long as the vessel is intact. If the vessel's integrity is compromised, the loss of pressure drops the boiling point, which can cause the liquid to convert to a gas expanding rapidly. If the gas is combustible, as in the case with hydrocarbons and alcohols, further damage can be caused by the ensuing fire.

HMS <i>Triumph</i> (1870) Swiftsure-class ironclad battleship

HMS Triumph was a broadside ironclad battleship of the Victorian era, the sister-ship of HMS Swiftsure. These two ships comprise the Swiftsure class of 1870.

<span class="mw-page-title-main">Ethylbenzene</span> Hydrocarbon compound; precursor to styrene and polystyrene

Ethylbenzene is an organic compound with the formula C6H5CH2CH3. It is a highly flammable, colorless liquid with an odor similar to that of gasoline. This monocyclic aromatic hydrocarbon is important in the petrochemical industry as a reaction intermediate in the production of styrene, the precursor to polystyrene, a common plastic material. In 2012, more than 99% of ethylbenzene produced was consumed in the production of styrene.

<span class="mw-page-title-main">Electrical equipment in hazardous areas</span> Electrical equipment in places where fire or explosion hazards may exist

In electrical and safety engineering, hazardous locations are places where fire or explosion hazards may exist. Sources of such hazards include gases, vapors, dust, fibers, and flyings, which are combustible or flammable. Electrical equipment installed in such locations can provide an ignition source, due to electrical arcing, or high temperatures. Standards and regulations exist to identify such locations, classify the hazards, and design equipment for safe use in such locations.

Mixtures of dispersed combustible materials and oxygen in the air will burn only if the fuel concentration lies within well-defined lower and upper bounds determined experimentally, referred to as flammability limits or explosive limits. Combustion can range in violence from deflagration through detonation.

<span class="mw-page-title-main">Hazardous Materials Identification System</span> Numerical hazard rating using colour coded labels

The Hazardous Materials Identification System (HMIS) is a numerical hazard rating that incorporates the use of labels with color developed by the American Coatings Association as a compliance aid for the OSHA Hazard Communication (HazCom) Standard.

<span class="mw-page-title-main">Combustibility and flammability</span> Ability to easily ignite in air at ambient temperatures

A combustible material is a material that can burn in air under certain conditions. A material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable material catches fire immediately on exposure to flame.

<span class="mw-page-title-main">Fire accelerant</span> Substance that speeds the development of fire

In fire protection, an accelerant is any substance or mixture that accelerates or speeds the development and escalation of fire. Accelerants are often used to commit arson, and some accelerants may cause an explosion. Some fire investigators use the term "accelerant" to mean any substance that initiates and promotes a fire without implying intent or malice. In Arson investigation, the significance of accelerant is to detect the presence of a such substance in order to proved that the fire is classified as an arson.

<span class="mw-page-title-main">Explosion</span> Sudden release of heat and gas

An explosion is a rapid expansion in volume of a given amount of matter associated with an extreme outward release of energy, usually with the generation of high temperatures and release of high-pressure gases. Explosions may also be generated by a slower expansion that would normally not be forceful, but is not allowed to expand, so that when whatever is containing the expansion is broken by the pressure that builds as the matter inside tries to expand, the matter expands forcefully. An example of this is a volcanic eruption created by the expansion of magma in a magma chamber as it rises to the surface. Supersonic explosions created by high explosives are known as detonations and travel through shock waves. Subsonic explosions are created by low explosives through a slower combustion process known as deflagration.

Hazard statements form part of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). They are intended to form a set of standardized phrases about the hazards of chemical substances and mixtures that can be translated into different languages. As such, they serve the same purpose as the well-known R-phrases, which they are intended to replace.

HMS <i>Doterel</i> (1880) Sloop of the Royal Navy

HMS Doterel was a Doterel-class sloop launched by the Royal Navy in 1880. She sank at anchor off Punta Arenas after an explosion on 26 April 1881. Her loss caused the deaths of 143 crew members, and there were 12 survivors. She was en route to join the Pacific Station. Her loss was initially the source of much speculation. Causes considered included an attack by the Fenians, a lost torpedo, and a coal gas explosion. An enquiry in September 1881 concluded coal gas was the cause.

Permit-to-work (PTW) refers to a management system procedure used to ensure that work is done safely and efficiently. It is used in hazardous industries, such as process and nuclear plants, usually in connection with maintenance work. It involves procedured request, review, authorization, documenting and, most importantly, de-conflicting of tasks to be carried out by front line workers. It ensures affected personnel are aware of the nature of the work and the hazards associated with it, all safety precautions have been put in place before starting the task, and the work has been completed correctly.

<span class="mw-page-title-main">Safety cabinet</span> Cabinet used to store flammable chemical substance or compressed gas cylinders

A safety cabinet is used for the safe storage of flammable chemical substance or compressed gas cylinders.

References

  1. 1 2 3 "Composition And Classification Of Driers". A Treatise On Architecture And Building Construction Vol4: Plumbing And Gas-Fitting, Heating And Ventilation, Painting And Decorating, Estimating And Calculating Quantities. Colliery Engineer Co. 1899. Retrieved 1 August 2011.
  2. 1 2 "The Age". The Age, Melbourne, Victoria. 26 February 1884.
  3. 1 2 3 4 5 6 7 Munroe, Charles E. (1899). "Explosions Caused by Commonly Occurring Substances" (PDF). Journal of the American Chemical Society. American Chemical Society. 21 (4): 317–347. doi:10.1021/ja02054a001. PMID   17792856 . Retrieved 18 April 2012.
  4. 1 2 3 4 The Record of the United States Naval Institute. Annapolis: United States Naval Institute. 1882. p. 671.
  5. 1 2 3 4 5 6 7 8 9 10 Parliament of Britain (1883). "Admiralty Instructions of June 1881 as to Xerotine Siccative". House of Commons Papers. 17. Retrieved 2011-08-10.
  6. ↑ Michael W. Pocock. "Daily Event for April 26". Maritime Quest. Retrieved 18 April 2012.
  7. 1 2 3 "Xerotine Siccative And Gas In Coal Bunkers". Bay Of Plenty Times. 11 March 1884. p. 2. Retrieved 20 May 2012.
  8. ↑ "Explosion on H.M.S. Triumph 1882". Old Mersey Times. Retrieved 25 April 2012.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.