Zagi M-91 | |
---|---|
Type | Submachine gun |
Place of origin | Croatia |
Service history | |
In service | 1991-? |
Used by | Croatia |
Wars | Yugoslav Wars |
Production history | |
Designed | 1991 |
Manufacturer | Likaweld, Zagreb |
Produced | 1991-? |
Specifications | |
Mass | 3.41 kg |
Length | stock retracted 565mm / stock extended 850mm |
Barrel length | 220mm |
Cartridge | 9×19mm Parabellum |
Caliber | 9 mm |
Action | Blowback, open bolt |
Rate of fire | 700 rpm |
Feed system | 32-round box magazine [1] |
Sights | Iron sights |
Zagi M-91 is a submachine gun created in 1991, when the dissolution of Yugoslavia left Croatia with few or no weapons to arm their military in the time of Croatian War of Independence. Since the embargo prevented the newly formed state from legally buying equipment abroad, they had no choice but to design new weapons locally. This gun was produced by LIKAWELD, now bankrupt machine tools factory based in Zagreb, also called the "First Croatian Weapons Factory", PHTO (Prva Hrvatska Tvornica Oružja).
The name of the gun likely relates to Zagi - squirrel mascot of XIV Summer Universiade that was held in Zagreb, in 1987.
Weapon's mechanism is based on Sten submachine gun, famous for its simplicity of production [2] Magazine is based on the MP40, dual stack, single feed magazine. Extending stock resembles one used in Grease gun. However, unlike its World War II predecessors, it features partially plastic receiver/handle. The guns were of uneven quality and proved unreliable, so their production was soon discontinued. [3]
Some of these guns ended up as military aid in 1992 in Bosnia and Herzegovina after the war started there, and were used by Bosnian army forces, desperately in need of the weapons. They copied the gun (with some small modifications, such as using the wooden lower receiver/handle instead of the original plastic one) and produced it in Pobjeda factory in town Goražde, calling it "Bosanski Zagi" (Bosnian Zagi), [4] in apparently very small numbers.
The AK-47, officially known as the Avtomat Kalashnikova, is a gas-operated assault rifle that is chambered for the 7.62×39mm cartridge. Developed in the Soviet Union by Russian small-arms designer Mikhail Kalashnikov, it is the originating firearm of the Kalashnikov family of rifles. After more than eight decades since its creation, the AK-47 model and its variants remain one of the most popular and widely used firearms in the world.
A submachine gun (SMG) is a magazine-fed automatic carbine designed to fire handgun cartridges. The term "submachine gun" was coined by John T. Thompson, the inventor of the Thompson submachine gun, to describe its design concept as an automatic firearm with notably less firepower than a machine gun. As a machine gun must fire rifle cartridges to be classified as such, submachine guns are not considered machine guns.
The IMI Galil is a family of Israeli-made automatic rifles chambered for the 5.56×45mm NATO and 7.62×51mm NATO cartridges. Originally designed by Yisrael Galili and Yakov Lior in the late 1960s, the Galil was first produced by the state-owned Israel Military Industries and is now exported by the privatized Israel Weapon Industries.
The Uzi is a family of Israeli open-bolt, blowback-operated submachine guns and machine pistols first designed by Major Uziel "Uzi" Gal in the late 1940s, shortly after the establishment of the State of Israel. It is one of the first weapons to incorporate a telescoping bolt design, which allows the magazine to be housed in the pistol grip for a shorter weapon.
The Thompson submachine gun is a blowback-operated, selective-fire submachine gun, invented and developed by United States Army Brigadier General John T. Thompson in 1918. It was designed to break the stalemate of trench warfare of World War I, although early models did not arrive in time for actual combat.
The MP 40 is a submachine gun chambered for the 9×19mm Parabellum cartridge. It was developed in Nazi Germany and used extensively by the Axis powers during World War II.
The STEN is a British submachine gun chambered in 9×19mm which was used extensively by British and Commonwealth forces throughout World War II and during the Korean War. The Sten paired a simple design with a low production cost, facilitating mass production to meet the demand for submachine guns.
The .45 Reising submachine gun was manufactured by Harrington & Richardson (H&R) Arms Company in Worcester, Massachusetts, USA, and was designed and patented by Eugene Reising in 1940. The three versions of the weapon were the Model 50, the folding stock Model 55, and the semiautomatic Model 60 rifle. Over 100,000 Reisings were ordered during World War II, and were initially used by the United States Navy, Marine Corps, and the United States Coast Guard, though some were shipped to Canadian, Soviet, and other allied forces to fight the Axis powers.
The Sterling submachine gun is a British submachine gun (SMG). It was tested by the British Army in 1944–1945, but did not start to replace the Sten until 1953. A successful and reliable design, it remained standard issue in the British Army until 1994, when it began to be replaced by the L85A1, a bullpup assault rifle.
The MP 18 is a German submachine gun designed and manufactured by Bergmann Waffenfabrik. Introduced into service in 1918 by the German Army during World War I, the MP 18 was intended for use by the Sturmtruppen, assault groups specialized in trench combat, as a short-range offensive weapon that would provide individual soldiers with increased firepower over a pistol.
The MP35 was a submachine gun used by the Wehrmacht, Waffen-SS and German police both before and during World War II. It was developed in the early 1930s by Emil Bergmann and manufactured at the Bergmann company in Suhl.
The Owen gun, known officially as the Owen machine carbine, was an Australian submachine gun designed by Evelyn Owen in 1938. The Owen was the only entirely Australian-designed and constructed service submachine gun of World War II and was used by the Australian Army from 1942 until 1971.
The PPSh-41 is a selective-fire, open-bolt, blowback submachine gun that fires the 7.62×25mm Tokarev round. It was designed by Georgy Shpagin of the Soviet Union to be a cheaper and simplified alternative to the PPD-40.
The Agram 2000 is a Croatian submachine gun inspired by Beretta's model M12. The name "Agram" is the old German name for Zagreb, the capital of Croatia. The vast numbers of ex-special forces Agrams in Croatia after the Croatian War of Independence, as well as the availability of a sound suppressor, has made it a popular choice for criminals. It was never officially adopted by the Croatian Army. Infamously unreliable in the war period due to its poorly constructed magazines, it would often fail to feed rounds from the magazine, decreasing its commercial demand outside of Croatia and transnational criminal organizations of the time.
The Sanna-77 is the end of a line of submachine guns which can trace their existence and lineage to the days of Rhodesia and their Unilateral Declaration of Independence in 1965.
The FMK-3 is a selective fire blowback-operated submachine gun of Argentinian origin designed by Fabricaciones Militares in 1974. Around 30,000 were produced for the Argentinian military by 1991.
The name Borz is an umbrella term applied to all improvised submachine guns produced during the years of independence of the Chechen Republic of Ichkeria. It was produced in small numbers from 1992 to 1999. The initial model was based on the Armenian K6-92, which in turn was based on the PPS submachine gun.
The M3 is an American .45-caliber submachine gun adopted by the U.S. Army on 12 December 1942, as the United States Submachine Gun, Cal. .45, M3. The M3 was chambered for the same .45 ACP round fired by the Thompson submachine gun, but was cheaper to mass produce and lighter, at the expense of accuracy. The M3 was commonly referred to as the "Grease Gun" or simply "the Greaser," owing to its visual similarity to the mechanic's tool.
The Pleter submachine gun is a submachine gun created in 1991, when the Breakup of Yugoslavia left Croatia with few weapons to arm their yet to be formed military in the midst of the Croatian War of Independence. The embargo prevented the newly formed state from legally buying equipment abroad, so they chose to try to design and produce some new weapons locally, mostly based on second generation of submachineguns.
The PPS is a family of Soviet submachine guns chambered in 7.62×25mm Tokarev, developed by Alexei Sudayev as a low-cost personal defense weapon for reconnaissance units, vehicle crews and support service personnel.