Zoomerang (Lake Compounce)

Last updated

Zoomerang
Zoomerang.jpg
Zoomerang's old color scheme from 1997–2007
Lake Compounce
Location Lake Compounce
Coordinates 41°38′35″N72°55′23″W / 41.642960°N 72.922946°W / 41.642960; -72.922946
StatusOperating
Opening dateJune 27, 1997
General statistics
Type Steel  Boomerang
Manufacturer Vekoma
Designer Vekoma
Model Boomerang
Height116.5 ft (35.5 m)
Length935 ft (285 m)
Speed47 mph (76 km/h)
Inversions 3
Duration1:48
Capacity760 riders per hour
G-force 5.2
Height restriction48 in (122 cm)
Zoomerang at RCDB

Zoomerang is a steel shuttle roller coaster located at Lake Compounce in Bristol, Connecticut. A Boomerang model manufactured by Vekoma, it contains a cobra roll and a vertical loop. Zoomerang was the first boomerang coaster to receive a Vekoma-designed train. [1] Earlier models used trains designed by Arrow Dynamics. In September 2007, due to paint deterioration, the ride was repainted with a new color scheme featuring purple tracks and teal supports. [2]

Contents

Ride experience

The train begins its backwards climb up the first of the ride's two 116-foot lift hills, both of which are placed diagonally towards each other. The train continues to slowly rise for thirty seconds before dropping at 47 miles per hour through the station and through the coaster's first inversion, a cobra roll, exerting as many as 5.2 Gs on riders throughout the two elements. The train then goes through a loop before entering the second lift section. The second lift pulls riders upwards for a few seconds, then releases, sending riders backwards. The train encounters the loop first this time, only to then go through the cobra roll once again, which leads riders back through the station and partially up the first lift section again. The train then slowly lowers back down into the station, having sent riders through 935 feet of three inversions in total, both forwards and backwards. [3]

Incidents

On June 14, 2001, the sensor on Zoomerang failed to communicate properly with the ride's automatic braking system, allowing the train of cars to continue on its own energy until it came to rest in a section of track 60 feet in the air, in the low point of the ride's cobra roll. 26 passengers were left stranded in their seats until firefighters evacuated the ride. None of the passengers were injured. Investigators determined that the incident was caused by a sensor malfunction. [4]

Related Research Articles

<span class="mw-page-title-main">Roller coaster inversion</span> Roller coaster element

A roller coaster inversion is a roller coaster element in which the track turns riders upside-down and then returns them to an upright position. Early forms of inversions were circular in nature and date back to 1848 on the Centrifugal railway in Paris. These vertical loops produced massive g-force that was often dangerous to riders. As a result, the element eventually became non-existent with the last rides to feature the looping inversions being dismantled during the Great Depression. In 1975, designers from Arrow Development created the corkscrew, reviving interest in the inversion during the modern age of steel roller coasters. Elements have since evolved from simple corkscrews and vertical loops to more complex inversions such as Immelmann loops and cobra rolls. The Smiler at Alton Towers holds the world record for the number of inversions on a roller coaster with 14.

<span class="mw-page-title-main">Shuttle roller coaster</span> Type of roller coaster

A shuttle roller coaster is any roller coaster that ultimately does not make a complete circuit, but rather reverses at some point throughout its course and traverses the same track backwards. These are sometimes referred to as boomerang roller coasters, due to the ubiquity of Vekoma's Boomerang coaster model.

<span class="mw-page-title-main">Boomerang (roller coaster)</span> Steel roller coaster

Boomerang is a model of roller coaster manufactured and designed by Vekoma, a Dutch manufacturer. The roller coaster model name is from the hunting implement based on the traditions of the Indigenous Australians. As of January 2023 there are 55 Boomerangs operating.

<span class="mw-page-title-main">Colossus (Thorpe Park)</span> Steel multi-inversion roller coaster

Colossus is a steel roller coaster at Thorpe Park in Surrey, England, and the park's first major attraction. It was built by Lichtenstein-based manufacturers Intamin and designed by Werner Stengel as an adaptation of Monte Makaya in Brazil. Colossus was the world's first roller coaster with ten inversions; an exact replica, called the 10 Inversion Roller Coaster, was later built at Chimelong Paradise in Guangzhou, China. It retained its title of having the most inversions on any other roller coaster in the world until The Smiler at Alton Towers took the record in 2013.

<span class="mw-page-title-main">Boomerang: Coast to Coaster</span> Type of roller coaster

Boomerang: Coast to Coaster is a steel roller coaster of shuttle design currently in use at four different Six Flags & EPR theme parks. The ride was designed and manufactured by Vekoma, and is considered as one of its boomerang models. Each coaster has one train with a capacity of 28, two across in each row. Unlike Vekoma's suspended trains, "Boomerang: Coast to Coaster" operates a sit-down design. When the coaster starts, the train is pulled backwards up the lift hill, then dropped through the loading gate through a cobra roll and then one loop. At the end of this cycle the train is pulled up the lift hill at the end of the track, then dropped once again allowing the train to go back through the loops backwards, hence the name "Boomerang: Coast to Coaster."

<span class="mw-page-title-main">Flashback (Six Flags New England)</span> Steel roller coaster

Flashback is a steel roller coaster of shuttle design currently operating at Six Flags New England. The ride has one train with a capacity of twenty-eight riders, two across in each row. When the coaster starts, the train is pulled backwards up the lift hill, then dropped through the loading gate into a cobra roll and then one loop. At the end of this cycle, the train is pulled up the lift hill at the end of the track. It is then released, allowing the train to traverse the track in the opposite direction. The ride is an off-the-shelf Vekoma Boomerang design common in many amusement parks.

<span class="mw-page-title-main">Batwing (roller coaster)</span> Steel flying roller coaster

Batwing is a steel flying roller coaster built by Vekoma at Six Flags America in Prince George's County, Maryland. This is nearly identical to Nighthawk at Carowinds, however that ride has a slightly different ending, and different paint scheme. The ride is also a clone of the now-defunct Firehawk at Kings Island.

<span class="mw-page-title-main">Boomerang (Worlds of Fun)</span> Roller coaster

Boomerang is a boomerang roller coaster located at Worlds of Fun in Kansas City, Missouri. It opened in the 2000 season, replacing the vacancy left by the original Zambezi Zinger's departure in 1997 and used Zambezi's line queue. Since 2005, the line queue and signage has moved. Boomerang is a "cookie-cutter" or "clone" ride, meaning it is not unique to Worlds of Fun and is manufactured by Vekoma for many other parks. Since Worlds of Fun has no Australia/Oceania section, the Boomerang was fitted into the Africa section.

<span class="mw-page-title-main">Jolly Rancher Remix</span> Shuttle roller coaster at Hersheypark

Jolly Rancher Remix is a steel shuttle roller coaster located at Hersheypark in Hershey, Pennsylvania, United States. A Boomerang model manufactured by Vekoma and designed by Peter Clerx, the roller coaster originally opened as the Sidewinder on May 11, 1991. The roller coaster debuted in the Pioneer Frontier section of the park and cost $4.2 million. The Sidewinder was the first roller coaster installed in the park in 14 years since the SooperDooperLooper in 1977 and the fourth roller coaster in operation to be built. The roller coaster has a maximum height of 116.5 ft (35.5 m), with a maximum speed of 47 mph (76 km/h), and a track length of 935 ft (285 m).

<span class="mw-page-title-main">Boomerang (Six Flags St. Louis)</span> Boomerang roller coaster

Boomerang is a boomerang roller coaster located at Six Flags St. Louis in Eureka, Missouri. It opened to the public on June 8, 2013. The ride originally opened as Flashback in 1989 at Six Flags Over Texas, where it operated through 2012.

<span class="mw-page-title-main">Firehawk (roller coaster)</span> Former roller coaster at Kings Island

Firehawk was a flying roller coaster located at Kings Island in Mason, Ohio. Manufactured by Vekoma, it originally opened as X-Flight at Six Flags Worlds of Adventure on May 26, 2001, billed as the Midwest's first and only flying roller coaster. Cedar Fair purchased Worlds of Adventure in 2004 and began efforts to downsize the park. X-Flight was relocated to Kings Island following the 2006 season, where it reopened as Firehawk on May 26, 2007.

<span class="mw-page-title-main">Invertigo (roller coaster)</span> Dutch designed roller coasters

Invertigo is the name of an inverted shuttle roller coaster model developed and manufactured by Dutch company Vekoma. Four roller coasters based on this model were built, with the first installation opening in 1997 as HangOver at Liseberg amusement park located in Sweden. Three of the four are still in operation. Invertigo is designed as an inverted variation of their traditional Boomerang model, which first appeared in 1984. Invertigo's seat configuration is also a departure from its predecessor, in that riders sit back-to-back, resulting in all rows facing one another with the exception of the first and last.

<span class="mw-page-title-main">The Odyssey (UK Roller Coaster)</span> Roller coaster in Ingoldmells, England

The Odyssey is a roller coaster at Fantasy Island in Ingoldmells, England. Built by Vekoma of the Netherlands in 2002, it was named to commemorate the Golden Jubilee of Queen Elizabeth II. It is Vekoma's tallest example of their Suspended Looping Coaster (SLC) design in the world. Standing at 167 feet, it is the fourth tallest roller coaster in the UK, after Hyperia the Big One and Stealth. And the joint second tallest full circuit inverted rollercoaster in the world. It has a maximum speed of 63 mph and is capable of forces up to 4.8g.

<span class="mw-page-title-main">The Flying Cobras</span> Roller coaster at Carowinds

The Flying Cobras is a steel boomerang roller coaster manufactured by Vekoma. It is located at Carowinds in Charlotte, North Carolina, in the County Fair section of the park. The Flying Cobras was the first roller coaster addition to Carowinds following the park's purchase by Cedar Fair in 2006. It originally debuted in 1996 at Geauga Lake in Ohio as The Mind Eraser, and was later known as Head Spin from 2004 to 2007 after Geauga Lake was purchased by Cedar Fair. After Geauga Lake closed in 2007, the coaster was relocated to Carowinds in 2009 and renamed Carolina Cobra. Following the 2016 season, the roller coaster was refurbished and renamed again in 2017.

<span class="mw-page-title-main">Wipeout (roller coaster)</span> Roller coaster located at Pleasurewood Hills theme park in Lowestoft, England

Wipeout is a roller coaster located at Pleasurewood Hills theme park in Lowestoft, England. Vekoma designed the roller coaster. Wipeout uses a boomerang design.

<span class="mw-page-title-main">Space Shuttle (roller coaster)</span> Roller coaster at Enchanted Kingdom, Santa Rosa, Laguna, Philippines

The Space Shuttle is a steel roller coaster situated at Enchanted Kingdom in Santa Rosa, Laguna in the Philippines. It is a Vekoma Boomerang coaster. It has a single train with seven cars, with 2 rows per car and 2 seats per row. The train is capable of carrying a maximum of 28 passengers. It is inspired by sci-fi films and the NASA space program of the 1960s. This 11-story roller coaster inverts riders six times - three times forward and three times backward. This is the first coaster ride of its kind in the country. This ride was originally called the 'Cobra' and it was located at West Midland Safari and Leisure Park in Bewdley, England from 1985 to 1991.

<span class="mw-page-title-main">SkyLoop</span> Steel roller coaster

SkyLoop is a type of steel roller coaster manufactured by Maurer Söhne. There are currently 10 SkyLoops operating worldwide, nine of which are identical XT 150 models, and one of which is an extended XT 450 model. The first SkyLoop to open was Sky Wheel in 2004 while the sole XT 450, Abismo, opened in 2006. There are also three other models—XT 900, Custom, and Launch—which have no installations as of 2021.

<span class="mw-page-title-main">Sea Serpent (Morey's Piers)</span> Steel roller coaster

Sea Serpent is a steel roller coaster at Morey's Piers in Wildwood, New Jersey. Opened in 1984, it was built by Vekoma, and was the first boomerang-style coaster to be built in the US. The coaster's installation was part of a redevelopment of the Marine Pier into a new Mariner's Landing area in 1984. The Sea Serpent currently sits in the middle of Mariners Landing and serves as an icon for the pier along with The Giant Wheel.

<span class="mw-page-title-main">HangTime (roller coaster)</span> Roller coaster at Knotts Berry Farm

HangTime is a steel roller coaster at Knott's Berry Farm in Buena Park, California. The Infinity Coaster was manufactured by Gerstlauer on the former site of Boomerang and Riptide. On opening, it had the steepest drop on a rollercoaster in California, at 96°. HangTime was also marketed by the park as the first Dive Coaster in California. It opened on May 18, 2018.

References

  1. "Zoomerang BD". Coaster-net.com. 2016. Retrieved August 9, 2017.
  2. "Zoomerang, Lake Compounce". ultimaterollercoaster.com. 2014. Retrieved July 13, 2014.
  3. Marden, Duane. " (Lake Compounce)". Roller Coaster DataBase . Retrieved August 7, 2017.
  4. "Roller Coaster strands passengers". cnn.com. 2001. Retrieved August 7, 2017.