.40-72 Winchester

Last updated
.40-72 Winchester Center Fire
40-72 Winchester cartridge metallic.jpg
Type Rifle
Place of origin United States
Production history
Designer Winchester Repeating Arms Company
Manufacturer Winchester Repeating Arms Company
Produced1895–1936
Specifications
Case type Rimmed, straight
Bullet diameter.406 in (10.3 mm)
Neck diameter.431 in (10.9 mm)
Base diameter.460 in (11.7 mm)
Rim diameter.518 in (13.2 mm)
Case length2.60 in (66 mm)
Overall length3.15 in (80 mm)
Rifling twist1 in 22 inches
Primer typelarge rifle
Ballistic performance
Bullet mass/typeVelocityEnergy
330 gr (21 g) 1,380 ft/s (420 m/s)1,395 ft⋅lbf (1,891 J)
300 gr (19 g) 1,420 ft/s (430 m/s)1,342 ft⋅lbf (1,820 J)
Test barrel length: 26
Source(s): The Rifle in America [1]

The .40-72 Winchester, also known as .40-72 WCF is a centerfire straight-walled rifle cartridge designed for black powder rather than smokeless powder. It was introduced in 1895 for the Winchester 1895 lever-action rifle. [2]

Contents

Description and performance

The .40-72 Winchester cartridge. 40-72 Winchester 1908-1914 Catalogue.jpg
The .40-72 Winchester cartridge.

The original Winchester factory load consisted of a 300-grain (19 g) bullet at 1,420 ft/s (430 m/s) or a 330-grain (21 g) bullet at 1,380 ft/s (420 m/s). [1]

With the introduction of superior cartridges designed for smokeless powder, the .40-72 Winchester became obsolete and was soon dropped from production. Production of loaded cartridges by Winchester ceased in 1936.

The .40-72 WCF cartridge. 40-72 WCF cartridge 2D.jpg
The .40-72 WCF cartridge.

Besides the Winchester 1895 lever-action, the .40-72 Winchester was chambered in the Winchester 1885 single-shot rifle. [3]

Dimensions

40-72 Winchester dimensions mm.jpg

See also

Related Research Articles

Winchester rifle is a comprehensive term describing a series of lever action repeating rifles manufactured by the Winchester Repeating Arms Company. Developed from the 1860 Henry rifle, Winchester rifles were among the earliest repeaters. The Model 1873 was particularly successful, being marketed by the manufacturer as "The Gun That Won the West".

<span class="mw-page-title-main">Lever action</span> Type of firearm action

Lever action is a type of action for repeating firearms that uses a manually operated cocking handle located around the trigger guard area that pivots forward to move the bolt via internal linkages, which will feed and extract cartridges into and out of the chamber, and cock the firing pin mechanism. This contrasts to other type of repeating actions such as the bolt-action, pump-action, semi-automatic, fully automatic, and/or burst mode actions. A firearm using this operating mechanism is colloquially referred to as a levergun.

<span class="mw-page-title-main">.45 Colt</span> Revolver cartridge designed by the U.S. Army

The .45 Colt (11.43×33mmR), is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 14 years, before being replaced by the .38 Long Colt in 1892.

The .30-06 Springfield cartridge, 7.62×63mm in metric notation, and called the .30 Gov't '06 by Winchester, was introduced to the United States Army in 1906 and later standardized; it remained in military use until the late 1970s. The ".30" refers to the caliber of the bullet in inches, .300 and the "06" refers to the year the cartridge was adopted, 1906. It replaced the .30-03, 6mm Lee Navy, and .30-40 Krag cartridges. The .30-06 remained the U.S. Army's primary rifle and machine gun cartridge for nearly 50 years before being replaced by the 7.62×51mm NATO and 5.56×45mm NATO, both of which remain in current U.S. and NATO service. It remains a very popular sporting round, with ammunition produced by all major manufacturers.

<span class="mw-page-title-main">.44-40 Winchester</span> American firearms cartridge

The .44-40 Winchester, also known as .44 Winchester, .44 WCF, and .44 Largo, was introduced in 1873 by the Winchester Repeating Arms Company. It was the first metallic centerfire cartridge manufactured by Winchester, and was promoted as the standard chambering for the new Winchester Model 1873 rifle. As both a rifle and a handgun caliber, the cartridge soon became widely popular, so much so that the Winchester Model 1873 rifle became known as "The gun that won the West."

<span class="mw-page-title-main">.30-40 Krag</span> First cartridge adopted by the US Army that was designed for smokeless powder.

The .30-40 Krag was a cartridge developed in the early 1890s to provide the U.S. armed forces with a smokeless powder cartridge suited for use with modern small-bore repeating rifles to be selected in the 1892 small arm trials. Since the cartridge it was replacing was the .45-70 Government, the new cartridge was considered small-bore at the time. The rifle ultimately selected for use by the Army was the Krag–Jørgensen, formally adopted as the M1892 Springfield. The cartridge was also used in the M1893, M1895, M1897, and M1900 Gatling guns.

<span class="mw-page-title-main">.25-06 Remington</span> US hunting rifle cartridge

Considered by many as the most balanced of the "quarter bores" for hunting medium-sized game, the .25-06 Remington remained in obscurity as a wildcat cartridge for nearly half a century before being standardized by Remington in 1969.

<span class="mw-page-title-main">.30-30 Winchester</span> Rifle cartridge designed by the Winchester Repeating Arms Company

The .30-30 Winchester cartridge was first marketed for the Winchester Model 1894 lever-action rifle in 1895. The .30-30, as it is most commonly known, along with the .25-35 Winchester were offered that year as the United States' first small-bore sporting rifle cartridges designed for smokeless powder. Since its introduction, it has been surpassed by many cartridges in the long-range shooting attributes of speed, energy, and trajectory, yet remains in widespread use because of its practical effectiveness in forested hunting situations.

The .30-03 Springfield (7.62×65mm) was a short-lived cartridge developed by the United States in 1903, to replace the .30-40 Krag in the new Springfield 1903 rifle. The .30-03 was also called the .30-45, since it used a 45 grain powder charge; the name was changed to .30-03 to indicate the year of adoption. It used a 220 grain roundnose bullet. It was replaced after only three years of service by the .30-06, firing a spitzer bullet giving better ballistic performance.

<span class="mw-page-title-main">.444 Marlin</span> Rifle cartridge

The .444 Marlin (10.9×57mmR) is a rifle cartridge designed in 1964 by Marlin Firearms and Remington Arms. It was designed to fill in a gap left by the older .45-70 when that cartridge was not available in any new lever-action rifles; at the time it was the largest lever-action cartridge available. The .444 resembles a lengthened .44 Magnum and provides a significant increase in velocity. It is usually used in the Marlin 444 lever-action rifle. Currently, Marlin, who is now owned by Ruger Firearms, does not offer the .444 chambering in any of their rifles. It remains to be seen when or if they will bring the chambering back into production.

<span class="mw-page-title-main">.25-20 Winchester</span>

The .25-20 Winchester, or WCF, was developed around 1895 for the Winchester Model 1892 lever action rifle. It was based on necking down the .32-20 Winchester. In the early 20th century, it was a popular small game and varmint round, developing around 1,460 ft/s with 86-grain bullets. But two years earlier Marlin Firearms Co. had already necked down the .32-20 Winchester, and called it the .25-20 Marlin. It was first chambered in Model 1889 lever action Marlins long before Winchester did the same thing and put their name on the .25-20.

<span class="mw-page-title-main">.303 Savage</span> Rimmed, .30 caliber rifle cartridge

The .303 Savage is a rimmed, .30 caliber rifle cartridge developed by the Savage Arms Company in 1894 which was designed as a short action cartridge for their Savage Model 1895 later 1899 hammerless lever-action rifle. The cartridge was designed for smokeless powder at a time when black-powder cartridges were still popular. The .303 Savage round was ballistically superior to the .30-30, but only marginally. The .303 Savage remained popular through the 1930s. Savage produced a half dozen loads for it. With its 190-grain loading, it was used on such animals as deer and moose.

<span class="mw-page-title-main">.250-3000 Savage</span> Rifle cartridge

The .250-3000 Savage is a rifle cartridge created by Charles Newton in 1915. It was designed to be used in the Savage Model 99 hammerless lever action rifle. The name comes from its original manufacturer, Savage Arms, and the fact that the original load achieved a 3,000 ft/s (910 m/s) velocity with an 87 grain bullet.

<span class="mw-page-title-main">6mm Lee Navy</span> US Navy and Marines rifle cartridge

The 6mm Lee Navy (6×60mmSR), also known as the 6mm U.S.N. or .236 Navy, is an obsolete American rifle cartridge. It was the service cartridge of the United States Navy and Marine Corps from 1895 to 1899, when it was then itself replaced by the more modern .30-40 Krag rifle cartridge.

<span class="mw-page-title-main">.33 Winchester</span> Rifle cartridge

The .33 Winchester Center Fire is a centerfire rifle cartridge designed and produced from 1902 to 1940 by Winchester Repeating Arms Company for their Model 1886 lever-action rifle.

The Winchester Model 1886 was a lever-action repeating rifle designed by John Browning to handle some of the more powerful cartridges of the period. Originally chambered in .45-70 Government, .45-90 Sharps, and .40-82 Winchester, it was later offered in a half dozen other large cartridges, including the .50-110 Winchester. Despite being originally designed for use with black powder, the action was strong enough to make the jump to smokeless powder with only minor modifications, and was subsequently chambered in the smokeless .33 Winchester cartridge beginning in 1903.

The .38-72 Winchester, also known as .38-72 WCF is a rimmed, bottleneck centerfire rifle cartridge introduced in 1895 for the Winchester 1895 lever-action rifle.

<span class="mw-page-title-main">.45-75 Winchester</span> Rifle cartridge

The .45-75 WinchesterCentennial is a centerfire rifle cartridge developed in 1876 for the newly designed Winchester Model 1876 Centennial lever-action rifle. Winchester Repeating Arms Company introduced the rifle and cartridge at the United States Centennial Exposition. The Model 1876 rifle used an enlarged version of the famous Winchester Model 1873 action to offer a lever-action repeating rifle using cartridges suitable for big-game hunting. The cartridge and rifle enjoyed brief popularity with Gilded Age American hunters including Theodore Roosevelt, and was issued to the Canadian North-West Mounted Police and to Texas Rangers.

<span class="mw-page-title-main">.45-60 Winchester</span> Rifle cartridge

The .45-60 Winchester is a centerfire rifle cartridge intended for 19th-century big-game hunting. Nomenclature of the era indicated the .45-60 cartridge contained a 0.45-inch (11.43 mm) diameter bullet with 60 grains (3.89 g) of black powder. Winchester Repeating Arms Company shortened the .45-70 Government cartridge to operate through the Winchester Model 1876 rifle's lever-action.

<span class="mw-page-title-main">.40-60 Winchester</span> Rifle cartridge

The .40-60 Winchester is a rimmed, bottlenecked centerfire rifle cartridge designed for use in lever-action rifles by Winchester Repeating Arms Company in 1884.

References

  1. 1 2 Sharpe, Philip B. The Rifle in America. Funk & Wagnalls: 1958, p. 748.
  2. Barnes, Frank C. Cartridges Of The World. Krause Publications: 1997.
  3. Whelen, Townsend. The American Rifle. The Century Co.: 1918, p. 43.