1:50 scale

Last updated
1:50 scale diecast construction equipment Model construction vehicles 1 50 scale.jpg
1:50 scale diecast construction equipment

1:50 scale is a popular size for diecast models from European manufacturers such as Conrad, Tekno, NZG, WSI and LionToys. Typically they produce scale models of construction vehicles, tower cranes, trucks and buses. [1] These are often the official models distributed by the manufacturers of the real vehicles as a promotional items for prospective customers. These models are also very popular in Europe despite their small size compared to stamped metal construction toys which are usually found in the US.

This scale is similar to O scale used in model trains and 1:50 scale will appear compatible with 1:48 scale models as produced by US manufacturers of O scale model trains and some makers of military vehicles (especially aircraft).

See also

Related Research Articles

<span class="mw-page-title-main">Model car</span> Scale model of car

A model car, or toy car, is a miniature representation of an automobile. Other miniature motor vehicles, such as trucks, buses, or even ATVs, etc. are often included in this general category. Because many miniature vehicles were originally aimed at children as playthings, there is no precise difference between a model car and a toy car, yet the word 'model' implies either assembly required or the accurate rendering of an actual vehicle at smaller scale. The kit building hobby became popular through the 1950s, while the collecting of miniatures by adults started to gain momentum around 1970. Precision-detailed miniatures made specifically for adults are a significant part of the market since the mid-1980s.

<span class="mw-page-title-main">Scale model</span> Physical representation of an object

A scale model is a physical model that is geometrically similar to an object. Scale models are generally smaller than large prototypes such as vehicles, buildings, or people; but may be larger than small prototypes such as anatomical structures or subatomic particles. Models built to the same scale as the prototype are called mockups.

<span class="mw-page-title-main">O scale</span> Model railroad gauge

O scale is a scale commonly used for toy trains and rail transport modelling. Introduced by German toy manufacturer Märklin around 1900, by the 1930s three-rail alternating current O gauge was the most common model railroad scale in the United States and remained so until the early 1960s. In Europe, its popularity declined before World War II due to the introduction of smaller scales.

<span class="mw-page-title-main">Louis Marx and Company</span> American Toy Company

Louis Marx and Company was an American toy manufacturer in business from 1919 to 1980. They made many types of toys including tin toys, toy soldiers, toy guns, action figures, dolls, toy cars and model trains. Some of their notable toys are Rock'em Sock'em Robots, Big Wheel tricycles, Disney branded dollhouses and playsets based on TV shows like Gunsmoke. Its products were often imprinted with the slogan "One of the many Marx toys, have you all of them?"

Dinky Toys was the brand name for a range of die-cast zamak zinc alloy scale model vehicles, traffic lights, and road signs produced by British toy company Meccano Ltd. They were made in England from 1934 to 1979, at a factory in Binns Road in Liverpool.

Ertl is a former American manufacturing company and current brand of toys, best known for its die-cast metal alloy collectible replicas of agricultural machinery. Other products manufactured by Ertl include cars, airplanes, and commercial vehicles.

<span class="mw-page-title-main">Die-cast toy</span> Type of toy

A die-cast toy is a toy or a collectible model produced by using the die-casting method of putting molten lead, zinc alloy or plastic in a mold to produce a particular shape. Such toys are made of metal, with plastic, rubber, glass, or other machined metal parts. Wholly plastic toys are made by a similar process of injection molding, but the two methods are distinct because of the properties of the materials.

<span class="mw-page-title-main">Siku Toys</span> Toy vehicles manufacturer based in Germany

Sieper Lüdenscheid GmbH & Co. KG, mostly known by its trade name Siku, is a German manufacturer of scale models headquartered in Lüdenscheid. Some of the products sold by Siku are model cars, figurines, model aircraft, model commercial vehicles, and model agricultural machinery. Traditionally, production was centered in Lüdenscheid, but diecast models are now made in China, the Philippines, Taiwan and Vietnam.

<span class="mw-page-title-main">Majorette (toy manufacturer)</span>

Majorette is a French toy manufacturer which mostly produces small Die-cast scale model cars, commercial vehicles, aircraft, and other vehicles, particularly in 1:64 scale. This is a normal 2.5–3 in (64–76 mm) size, thus Majorette has sometimes been called "the Matchbox of France". Traditionally, production was centered in the urban area of Lyon, but diecast models are now made in China, the Philippines, Taiwan, Thailand and Vietnam.

1:48 scale is a scale commonly used in diecast models, plastic models made from kits, and construction toys. It is especially popular with manufacturers of model aircraft and model trains, where it is known as "O scale". 1:48 is also a popular scale among Lego enthusiasts, since it is approximately the scale of the Lego minifigure.

<span class="mw-page-title-main">1:64 scale</span> Scale model size standard

The 1:64 scale is a traditional scale for models and miniatures, in which one unit on the model represents 64 units on the actual object. It is also known as the "three-sixteenths scale" since 3/16 of an inch represents one foot. An average human is approximately 1+116 inches (27 mm) tall when represented in 1:64 scale.

1:43 scale is a popular size of die-cast model cars in Europe, Asia and the US. It has its origins in the British / European O scale for model trains and the rise of certain accessories made for that scale which since have become popular in their own right. Models in this scale are 10–13 cm length.

1:18 scale diecast replicas are 1/18th the size of the real vehicle. Most popular in this category are 1:18 scale automobile replicas – usually made out of Zamak zinc diecasting alloy with plastic parts. "1:18 scale" is the colloquial reference to this class of toy or replica.

<span class="mw-page-title-main">Conrad Models</span> German scale model manufacturer

Conrad GmbH is a German manufacturer of diecast scale model trucks, primarily in 1:50 scale for use both as toys and promotional models by heavy equipment manufacturers. Conrad is one of the few European diecast companies which have not outsourced production to China or elsewhere in Asia. Conrad Modelle is headquartered in Kalchreuth, just northeast of Nuremberg.

Nürnberger Zinkdruckguß-Modelle GmbH is a German manufacturer of diecast scale models primarily in 1:50 scale for use both as toys and promotional models mainly by heavy transport and construction equipment manufacturers.

The Hubley Manufacturing Company was an American producer of a wide range of cast-iron toys, doorstops, and bookends. Toys, particularly motor vehicles and cap guns, were also produced in zinc alloy and plastic. The company is probably most well known for its detailed scale metal kits of Classic cars in about 1:20 scale. Starting in 1960, Hubley participated for a couple of years with Detroit automakers as a plastic promotional model maker. Many Hubley toys are now sought-after collectibles.

<span class="mw-page-title-main">Polistil</span>

Polistil S.p.A. is an Italian toy brand and former manufacturing company headquartered in Milan, with production center in Chiari, near Brescia. Polistil specialized in die-cast and plastic scale model vehicles of all sizes.

<span class="mw-page-title-main">Gama Toys</span>

Gama is a German maker of toys, usually cars and trucks, dating from before World War I. The company is headquartered in Fürth, Bavaria, near Nürnberg, a traditional German toymaking center. Other German companies that competed with Gama Toys were Schuco Modell and Conrad Models.

<span class="mw-page-title-main">Mercury (toy manufacturer)</span> Italian scale model cars manufacturer

Mercury was an Italian manufacturing company of die-cast scale model cars. Based in Turin, Mercury was active from 1932 until 1980. Along with Dinky Toys in England, Mercury was a pioneer in 1:43 scale diecast toys made in Europe. Today, Mercury models are rather rare and not easy to find. The company logo was the word Mercury within a rectangle with a round toothed gear behind the company name.

References

  1. Vossler B (1998). Toy Farm Tractors: An Entertaining History of Toy Tractors and Toy Farm Collectibles. Voyageur Press. p. 57. ISBN   978-0896583801 . Retrieved 13 February 2018.