Amateur Telescope Making

Last updated
Amateur Telescope Making
AmateurTelescopeMakingVol 1.jpg
Fourth edition cover, Book One

Volumes:
Amateur Telescope Making
Amateur Telescope Making - Advanced
Amateur Telescope Making - Book Three
Author Albert G. Ingalls
CountryUnited States
LanguageEnglish
Genre Amateur astronomy
Publisher Scientific American, Inc.
Published1935, 1958
Media typePrint (Hardback)

Amateur Telescope Making (ATM) is a series of three books edited by Albert G. Ingalls between 1926 and 1953 while he was an associate editor at Scientific American . The books cover various aspects of telescope construction and observational technique, sometimes at quite an advanced level, but always in a way that is accessible to the intelligent amateur. The caliber of the contributions is uniformly high and the books have remained in constant use by both amateurs and professionals.

Contents

The first volume was essentially a reprinting of articles written by Ingalls and Russell W. Porter for Ingalls's monthly column "The Backyard Astronomer" (later "The Amateur Scientist") in the 1920s. It also featured numerous drawings by Porter. The two later volumes contained chapters written by James Gilbert Baker, George Ellery Hale, George Willis Ritchey and others on topics ranging from lens grinding to monochromators to photoelectric photometry. Much of the information, including Porter's articles on the Springfield mount and Franklin Wright's and Henry E. Paul's articles on the design and construction of Schmidt cameras, appeared for the first and only time in these books.

The ATM books are widely credited with having initiated the amateur telescope making movement in the United States. They are often referred to collectively as the "bible" of amateur telescope making. [1]

Origins

Shortly after joining the editorial staff at Scientific American in 1923, Ingalls happened to see an article by Russell Porter in Popular Astronomy magazine describing the work of "The Telescope Makers of Springfield, Vermont." Ingalls contacted Porter, who arranged a visit to New York. Porter convinced Ingalls to use Scientific American as a platform for "spreading the telescope making virus." [1]

The first article appeared in November 1925; in it, Ingalls wrote that if there was a strong enough response from readers, he would write a follow-up article with instructions for making a mirror and mounting for a simple telescope. Nearly a thousand letters were received, and Ingalls and Porter collaborated on two more articles which appeared in February and March 1926. A fourth article in April 1926 contained a simpler treatment of telescope making by John M. Pierce of the Springfield Telescope Makers.

The first edition of ATM appeared in 1926. It contained 102 pages, and consisted of the two Porter articles plus extensive extracts from a 1920 book, The Amateur's Telescope, by Irish astronomer Rev. W. F. A. Ellison. [2] The 820 copies of the first printing were sold out by mid-1928. [1] The book was reprinted many times in more expanded editions; the final edition in 1980 had 510 pages.

In May 1928, Ingalls began a regular column for Scientific American on telescope building called "The Back Yard Astronomer." In about a year the title was changed to "The Amateur Astronomer", about six years later to "The Amateur Telescope Maker", and from 1937 to 1948 it was called "Telescoptics". Eventually Ingalls chose to broaden the column's scope to include "how-to's" from all fields of science, changing the column's name to "The Amateur Scientist" which it retained until 2001. [3]

In the meantime, two additional volumes had appeared: Amateur Telescope Making - Advanced (1st printing, 1937) and Amateur Telescope Making - Book Three (1953). These were based largely on articles that first appeared in Ingalls' column, plus some chapters that were commissioned for the books.

Philosophy

The ATM books promoted a philosophy of telescope making that eschewed standardization and rote rule-following, emphasizing instead the importance of intellectual involvement and creativity in the solution of problems, as well as the highest standards in optical and mechanical performance. In the "Preface" to the 3rd edition (1932) of Volume 1, Ingalls wrote

Telescope making is a scientific hobby and it appeals doubtless because it exacts intelligence; requires patience and sometimes dogged persistence in order to whip the knotty but fascinating problems which arise; demands hard work -- is not dead easy; and compels the exercise of a fair amount of handiness -- enough to exclude the born bungler but no more than is possessed by the average man who can "tinker" his car or the household plumbing...The hobby also appeals because the worker derives something of a thrill while shaping the refined curve of the glass as he realizes that, with scarecly any special tools...he is able to work to within almost a millionth of an inch of absolute perfection.

He continued

Some of the workers -- a very few -- have strongly urged that the amateur's telescopes be standardized on a few definite type specifications, arguing that this would save labor. Others believe that standardized hobbies connote standardized people with standardized ideas, and that the introduction of mass production and labor-saving ideas of efficiency in connection with a hobby is comparable to hiring a workman to play one's games for him. A hobby should be a way to waste time, not to count it.

Publication history

Volume 1

Volume 1 underwent substantial changes in content in its 2nd and 3rd editions. Most of the changes consisted of new material, but there were also deletions, e.g. the extract from Ellison's book. [4]

...

Volume 2

...

Volume 3

...

Re-publication by Willmann-Bell

The ATM books were republished, in a "re-organized" form, by Willmann-Bell in 1996. The chapters were rearranged into ostensibly more logical groupings. While still in three volumes, there is not a one-to-one correspondence between the material in the original and new versions of each volume. The tables of contents and indices were expanded. Articles on pendulum clocks and photoelectric photometry were deleted.

Related Research Articles

<span class="mw-page-title-main">Amateur astronomy</span> Hobby of watching the sky and stars

Amateur astronomy is a hobby where participants enjoy observing or imaging celestial objects in the sky using the unaided eye, binoculars, or telescopes. Even though scientific research may not be their primary goal, some amateur astronomers make contributions in doing citizen science, such as by monitoring variable stars, double stars, sunspots, or occultations of stars by the Moon or asteroids, or by discovering transient astronomical events, such as comets, galactic novae or supernovae in other galaxies.

ATM or atm often refers to:

<span class="mw-page-title-main">Amateur telescope making</span>

Amateur telescope making is the activity of building telescopes as a hobby, as opposed to being a paid professional. Amateur telescope makers build their instruments for personal enjoyment of a technical challenge, as a way to obtain an inexpensive or personally customized telescope, or as a research tool in the field of astronomy. Amateur telescope makers are usually a sub-group in the field of amateur astronomy.

<span class="mw-page-title-main">Dobsonian telescope</span> Type of Newtonian telescope popularized by John Dobson

A Dobsonian telescope is an altazimuth-mounted Newtonian telescope design popularized by John Dobson in 1965 and credited with vastly increasing the size of telescopes available to amateur astronomers. Dobson's telescopes featured a simplified mechanical design that was easy to manufacture from readily available components to create a large, portable, low-cost telescope. The design is optimized for observing faint, deep-sky objects such as nebulae and galaxies. This type of observation requires a large objective diameter of relatively short focal length and portability for travel to less light-polluted locations.

"The Amateur Scientist" was a column in the Scientific American, and was the definitive "how-to" resource for citizen-scientists for over 72 years (1928–2001), making it the longest running column in Scientific American's history. The column was regarded for revealing the brass-tacks secrets of research and showing home-based experimenters how to make original discoveries using only inexpensive materials. Since its début in 1928, "The Amateur Scientist" was a primary resource for science fair projects. It also inspired amateur experimenters, launched careers in science, and enjoyed a place of honor in classrooms and school libraries all over the world.

<i>Sky & Telescope</i> American monthly magazine

Sky & Telescope (S&T) is a monthly American magazine covering all aspects of amateur astronomy, including the following:

Jean Meeus is a Belgian meteorologist and amateur astronomer specializing in celestial mechanics, spherical astronomy, and mathematical astronomy.

<span class="mw-page-title-main">Stellafane</span> Observatory

The Stellafane Observatory is an astronomical observatory in Springfield, Vermont, founded in 1920 by Russell W. Porter. The Pink Clubhouse was built in 1923 at the site by the Springfield Telescope Makers Club. The name Stellafane, suggested by Porter at the club's December 1923 meeting, is derived from the Latin words stella and fanum meaning "Shrine to the Stars", and originally referred specifically to the clubhouse, but has since come to refer to all of the club's land and buildings on the summit of Breezy Hill, west of downtown Springfield.

Russell Williams Porter was an American artist, engineer, amateur astronomer and Arctic explorer. He was a pioneer in the field of “cutaway illustration" and is sometimes referred to as the "founder" or one of the "founders" of amateur telescope making."

<span class="mw-page-title-main">Deep-sky object</span> Any astronomical object that is not an individual star

A deep-sky object (DSO) is any astronomical object that is not an individual star or Solar System object. The classification is used for the most part by amateur astronomers to denote visually observed faint naked eye and telescopic objects such as star clusters, nebulae and galaxies. This distinction is practical and technical, implying a variety of instruments and techniques appropriate to observation, and does not distinguish the nature of the object itself.

Albert Graham Ingalls was an American scientific editor and amateur astronomer. Through his columns in Scientific American, including "The Amateur Scientist", and his three-volume series Amateur Telescope Making, Ingalls exerted a great influence on amateur astronomy and amateur telescope making in the United States.

<i>Astronomy</i> (magazine)

Astronomy is a monthly American magazine about astronomy. Targeting amateur astronomers, it contains columns on sky viewing, reader-submitted astrophotographs, and articles on astronomy and astrophysics for general readers.

The Royal Astronomical Society of Canada (RASC) is a national, non-profit, charitable organization devoted to the advancement of astronomy and related sciences. At present, there are 28 local branches of the Society, called Centres, in towns and cities across the country from St. John's, Newfoundland, to Victoria, British Columbia, and as far north as Whitehorse, Yukon. There are about 5100 members from coast to coast to coast, and internationally. The membership is composed primarily of amateur astronomers and also includes numerous professional astronomers and astronomy educators. The RASC is the Canadian equivalent of the British Astronomical Association.

Reverend William Frederick Archdall Ellison FRAS(28 April 1864 – 31 December 1936) was an Irish clergyman, Hebrew scholar, organist, avid amateur telescope maker, and, from 1918 to 1936, director of Armagh Observatory in Armagh, Northern Ireland. He was the father of Mervyn A. Ellison, the senior professor of the School of Cosmic Physics at Dunsink Observatory from 1958 to 1963.

<span class="mw-page-title-main">John M. Pierce</span>

John M. Pierce was an American teacher and amateur astronomer.

Robert Edward Cox was an American optical engineer and a popularizer of amateur telescope making. He conducted the popular "Gleanings for ATMs" column in Sky and Telescope magazine for 21 years.

<span class="mw-page-title-main">Mirror support cell</span>

In astronomy, a mirror support cell - more commonly mirror cell - is a component of a reflecting telescope that supports the mirror in place to hold optical alignment, allow collimation adjustment, and protect it from falling out. The common usage of the word denotes the cell that holds the primary mirror (M1), however technically it could also be used to denote the support assembly for the secondary mirror (M2) or other mirrors.

John F. Gregory was an American optical engineer and a popularizer of amateur telescope making. He is credited with the design of a version of the Maksutov telescope called the "Gregory-Maksutov telescope".

<span class="mw-page-title-main">Foucault knife-edge test</span>

The Foucault knife-edge test is an optical test developed 150 years ago to accurately measure the shape of concave curved mirrors. It is commonly used by amateur telescope makers for figuring primary mirrors in reflecting telescopes. It uses a relatively simple, inexpensive apparatus compared to other testing techniques.

<span class="mw-page-title-main">The Porter Garden Telescope</span> Ornamental telescope for the garden

The Porter Garden Telescope was an innovative ornamental telescope for the garden designed by Russell W. Porter and commercialized by Jones & Lamson Machine Company at the beginning of the 1920s in the United States.

References

  1. 1 2 3 Williams, Thomas R. (February 1991), "Albert Ingalls and the ATM Movement", Sky and Telescope , vol. 81, pp. 140–142, Bibcode:1991S&T....81..140W
  2. Ellison, W. F. A., The Amateur's Telescope Archived 2010-03-04 at the Wayback Machine (1920)
  3. Cox, Robert E. (October 1958), "Albert G. Ingalls, T. N.", Sky and Telescope , vol. 17, pp. 616–617, Bibcode:1958S&T....17..616C
  4. Editions and printings, Amateur Telescope Making