Automatic number announcement circuit

Last updated

An automatic number announcement circuit (ANAC) is a component of a central office of a telephone company that provides a service to installation and service technicians to determine the telephone number of a telephone line. The facility has a telephone number that may be called to listen to an automatic announcement that includes the caller's telephone number. The ANAC facility is useful primarily during the installation of landline telephones to quickly identify one of multiple wire pairs in a bundle or at a termination point.

Contents

Operation

By connecting a test telephone set, a technician calls the local telephone number of the automatic number announcement service. This call is connected to equipment at the central office that uses automatic equipment to announce the telephone number of the line calling in. The main purpose of this system is to allow telephone company technicians to identify the telephone line they are connected to.

Automatic number announcement systems are based on automatic number identification. They are intended for use by phone company technicians, the ANAC system bypasses customer features, such as unlisted numbers, caller ID blocking, and outgoing call blocking. Installers of multi-line business services where outgoing calls from all lines display the company's main number on call display can use ANAC to identify a specific line in the system, even if CID displays every line as "line one".

Most ANAC systems are provider-specific in each wire center, while others are regional or state-/province- or area-code-wide. No official lists of ANAC numbers are published, as telephone companies guard against abuse that would interfere with availability for installers. [1]

Exchange prefixes for testing

The North American Numbering Plan reserves the exchange (central office) prefixes 958 and 959 for plant testing purposes. [2] Code 959 with three or four additional digits is dedicated for access to office test lines in local exchange carrier and interoffice carrier central offices. The specifications define several test features for line conditions, such as quiet line and busy line, and test tones transmitted to callers. Telephone numbers are assigned for ring back to test the ringer when installing telephone sets, milliwatt tone (a number simply answers with a continuous test tone) and a loop around (which connects a call to another inbound call to the same or another test number).

ANAC services are typically installed in the 958 range, which is intended for communications between central offices. [2] In some area codes, multiple additional prefixes may be reserved for test purposes. Many area codes reserved 999; 320 was also formerly reserved in Bell Canada territory.

Other carrier-specific North American test numbers include 555-XXXX numbers (such as 555-0311 on Rogers Communications in Canada) or vertical service codes, such as *99 on Cablevision/Optimum Voice in the United States. MCI Inc. (United States) provides ANI information by dialing 800-444-4444.

Telephone numbers

Plant testing telephone numbers are carrier-specific, there is no comprehensive list of telephone numbers for ANAC services. In some communities, test numbers change relatively often.[ dubious ] In others, a major incumbent carrier might assign a single number which provides test functions on its network across an entire numbering plan area, throughout an entire province or state, or system-wide.[ citation needed ]

Some telecommunication carriers maintain toll-free numbers for ANAC facilities. Some national toll-free numbers provide automatic number identification by speaking the telephone number of the caller, but these are not intended for use in identifying the customer's own phone number. They are used for the agent in a call center to confirm the telephone a customer is calling from, so that the customer's account information can be displayed as a "screen pop" for the next available customer service representative.

See also

Related Research Articles

<span class="mw-page-title-main">Telephone card</span> Card used to pay for telephone services

A telephone card, calling card or phone card for short, is a credit card-size plastic or paper card used to pay for telephone services. It is not necessary to have the physical card except with a stored-value system; knowledge of the access telephone number to dial and the PIN is sufficient. Standard cards which can be purchased and used without any sort of account facility give a fixed amount of credit and are discarded when used up; rechargeable cards can be topped up, or collect payment in arrears. The system for payment and the way in which the card is used to place a telephone call vary from card to card.

Caller identification is a telephone service, available in analog and digital telephone systems, including voice over IP (VoIP), that transmits a caller's telephone number to the called party's telephone equipment when the call is being set up. The caller ID service may include the transmission of a name associated with the calling telephone number, in a service called Calling Name Presentation (CNAM). The service was first defined in 1993 in International Telecommunication Union – Telecommunication Standardization Sector (ITU-T) Recommendation Q.731.3.

<span class="mw-page-title-main">Blue box</span> Device for hacking telephone networks

A blue box is an electronic device that produces tones used to generate the in-band signaling tones formerly used within the North American long-distance telephone network to send line status and called number information over voice circuits. This allowed an illicit user, referred to as a "phreaker", to place long-distance calls, without using the network's user facilities, that would be billed to another number or dismissed entirely as an incomplete call. A number of similar "color boxes" were also created to control other aspects of the phone network.

<span class="mw-page-title-main">North American Numbering Plan</span> Integrated telephone numbering plan of twenty North American countries

The North American Numbering Plan (NANP) is a telephone numbering plan for twenty-five regions in twenty countries, primarily in North America and the Caribbean. This group is historically known as World Zone 1 and has the telephone country code 1. Some North American countries, most notably Mexico, do not participate with the NANP.

Automatic number identification (ANI) is a feature of a telecommunications network for automatically determining the origination telephone number on toll calls for billing purposes. Automatic number identification was originally created by the American Telephone and Telegraph Company (AT&T) for long distance service in the Bell System, eliminating the need for telephone operators to manually record calls.

A toll-free telephone number or freephone number is a telephone number that is billed for all arriving calls. For the calling party, a call to a toll-free number from a landline is free of charge. A toll-free number is identified by a dialing prefix similar to an area code. The specific service access varies by country.

Call waiting is a telephone service where a subscriber can accept a second incoming telephone call by placing an in-progress call on hold—and may also switch between calls. With some providers it can be combined with additional features such as conferencing, call forwarding, and caller ID. Call waiting is intended to alleviate the need to have more than one telephone line or number for voice communications.

Call forwarding, or call diversion, is a telephony feature of all telephone switching systems which redirects a telephone call to another destination, which may be, for example, a mobile or another telephone number where the desired called party is available. Call forwarding was invented by Ernest J. Bonanno.

A ringback number is a telephone number for a telephone line that automatically calls the line that the call was placed from, after the caller has hung up. The typical use of this facility is by telephone company technicians for testing a new installation or for trouble-shooting.

A telephone numbering plan is a type of numbering scheme used in telecommunication to assign telephone numbers to subscriber telephones or other telephony endpoints. Telephone numbers are the addresses of participants in a telephone network, reachable by a system of destination code routing. Telephone numbering plans are defined in each of the administrative regions of the public switched telephone network (PSTN) and in private telephone networks.

Phone fraud, or more generally communications fraud, is the use of telecommunications products or services with the intention of illegally acquiring money from, or failing to pay, a telecommunication company or its customers.

In telecommunications, a long-distance call (U.S.) or trunk call is a telephone call made to a location outside a defined local calling area. Long-distance calls are typically charged a higher billing rate than local calls. The term is not necessarily synonymous with placing calls to another telephone area code.

<span class="mw-page-title-main">Telephone numbers in the Republic of Ireland</span>

Numbers on the Irish telephone numbering plan are regulated and assigned to operators by ComReg.

An intercept message is a telephone recording informing the caller that the call cannot be completed, for any of a number of reasons ranging from local congestion, to disconnection of the destination phone, number dial errors or network trouble along the route.

A loop line or loop around is a telephone company test circuit. The circuit has two associated phone numbers. When one side of the loop is called, the caller receives a test tone of approximately 1000 Hz. When the second number is called, it produces dead silence, but the party on side A hears the milliwatt test tone drop, and is connected to the person on side B. The purpose of the loop around test is to allow circuit testing to a distant central office without needing a person at the far end. The technician can send a tone down either line and measure the response tone on the second line to determine the path loss parameters.

Automatic message accounting (AMA) provides detailed accounting for telephone calls. When direct distance dialing (DDD) was introduced in the US, message registers no longer sufficed for dialed telephone calls. The need to record the time and phone number of each long-distance call was met by electromechanical data processing equipment.

<span class="mw-page-title-main">Telephone number</span> Sequence of digits assigned to a telephone subscription

A telephone number is a sequence of digits assigned to a landline telephone subscriber station connected to a telephone line or to a wireless electronic telephony device, such as a radio telephone or a mobile telephone, or to other devices for data transmission via the public switched telephone network (PSTN), or other public and private networks. Modern smart phones have added a built-in layer of abstraction whereby individuals or businesses are saved into a contacts application and the numbers no longer have to be written down or memorized.

Toll-free telephone numbers in the North American Numbering Plan have the area code prefix 800, 833, 844, 855, 866, 877, and 888. Additionally, area codes 822, 880 through 887, and 889 are reserved for toll-free use in the future. 811 is excluded because it is a special dialing code in the group NXX for various other purposes.

In telecommunications, a plant test number is a telephone number reserved for use by telephone installers or other workers to test an individual telephone line. Test number are typically unlisted.

References

  1. "Bell Canada → [Internet] What is the number to dial to get the phone line #?". DSLReports Forums. Jan 4, 2011.
  2. 1 2 Telcordia Notes on the Network. Telcordia Technologies. October 2000. p. 8-8.{{cite book}}: |work= ignored (help)