| Avro 500 | |
|---|---|
 | |
| Role | Military utility aircraft |
| Manufacturer | Avro |
| Designer | A.V. Roe |
| First flight | 3 March 1912 |
| Introduction | 1912 |
| Primary user | United Kingdom |
| Number built | 18 |
The Avro Type E, Type 500, and Type 502 made up a family of early British military aircraft, regarded by Alliott Verdon Roe as his firm's first truly successful design. It was a forerunner of the Avro 504, one of the outstanding aircraft of the First World War.
The Type E biplane was designed in parallel with the slightly earlier Avro Duigan, differing principally in being slightly larger and having a more powerful (60 horsepower (45 kW)) water-cooled E.N.V. engine. Both were two-bay tractor biplanes with unstaggered parallel-chord wings with rounded tips, a deep rectangular section fuselage bearing rectangular steel-framed stabilisers, elevators and rudder with no fixed fin, and an undercarriage with a pair of wheels on a transverse leaf-spring and a long central skid projecting forward of the propeller. This aircraft layout dominated aircraft design for twenty years: the Avro 500 and the contemporary B.E.1 are among the first truly practical examples built.
| Duigan | |
|---|---|
 | |
| Role | 2 seat biplane |
| National origin | UK |
| Manufacturer | A.V Roe & Co |
| Designer | A.V. Roe |
| First flight | March 1912 |
| Number built | 1 |
| Variants | Avro 500 |
The Avro Duigan was single seat tractor biplane built by A.V. Roe for the pioneer Australian aviator John Robertson Duigan in 1911. Roe's first biplane design, the Avro Type D had first flown in April 1911. The Avro Duigan was a major refinement of this fundamentally successful aircraft. It had a square rather than triangular cross section fuselage, simplifying construction and allowing the crew seats to be lower down, giving more protection. The wings were supported using an aerodynamically cleaner ordinary two-bay layout, replacing the two and a half bay arrangement of its predecessor, which had a third pair of interplane struts close to the fuselage. The undercarriage was simpler, a V-strut below the wing leading edge bearing a leaf-spring axle whose wheels had the refinement of covered spokes, and under this a single long skid supported by a second V-strut below the trailing edge and a single strut from the extreme nose of the aircraft. The tailplane was steel framed, with a rectangular fixed stabiliser and elevator and rudder. Other details were as previous aircraft. [1] The fuselage was constructed of wire-braced ash metal covered forward of the cockpits. The observer sat in front with the pilot sitting behind the cut away trailing edge, an arrangement which positioned the front cockpit close to the centre of gravity of the aircraft and allowed it to be flown without a passenger with no change its balance. The wire-braced high aspect ratio two-bay wings had ash spars and poplar ribs with the curved ends formed from cane. Lateral control was by wing warping. A sprung tailskid was mounted below the rudder and small hoops were fitted below the outer interplane struts to protect the wingtips. The aircraft had dual controls and was fitted with small "Cellon" window to improve downward vision.
The aircraft was initially powered by a 40 hp (30 kW) [2] two-cylinder horizontally opposed Alvaston but soon replaced by a 35 hp (26 kW) E.N.V. V-8 motor. [3] Both were water-cooled engines, with pairs of large coiled tube radiators positioned parallel to the fuselage on either side of the front cockpit.
Trials with the Alvaston engine at Huntingdon race course were not successful, the aircraft barely lifting off. On his return to Brooklands, the E.N.V. motor was fitted and on 10 March 1912 Duigan, flying solo managed some long, straight flights in his too-evidently underpowered machine. Some intensive engine tuning, together with a new propeller resulted in more success that April, with solo circuits, figures of eight, and an hour-long series of circuits at about 500 ft (150 m). Nonetheless, Duigan won his Aviator's Certificate and returned to Australia. His aircraft, without its engine, was sold to the Lakes Aircraft Co. who rebuilt it as the Lakes Sea Bird floatplane in October 1912, powered by a 50 h (37 kW ) Gnome engine. In this form, it performed well. The slightly larger Avro 500, powered by a 60 hp (45 kW) E.N.V. was the first Avro aircraft type to be built in any quantity.
Data from Avro Aircraft since 1908 [4]
General characteristics
Performance
The aircraft was first flown on 3 March 1912 by Wilfred Parke, [5] and while top speed and rate of climb did not meet expectations, the aircraft excelled in every other way. However, its performance was not up to Roe's expectations, and a second example was built, modified to take the much lighter 50 hp (37 kW) Gnome air-cooled rotary engine. This first flew on 8 May 1912, and a height of 2,000 ft (610 m) was reached in five minutes. [6] The next day the aircraft was flown from Brooklands to Laffan's Plain, covering the 17 miles (28 km) in 20 minutes. The same day it demonstrated its ability to meet the requirements laid down by the War Office in the requirements for a "Military Aircraft" that had been published in connection with the forthcoming Military Aeroplane Competition, and the authorities were impressed enough to buy the aircraft and placed an order for two more examples of the aircraft, which Roe now renamed the Avro 500.
The type proved an immediate success in service, and orders for another four machines plus five single-seat derivatives (designated the Type 502 by Avro) soon followed. Other examples produced included six for the British Admiralty's Air Department, one presented to the government of Portugal (paid for by public subscription), one kept by Avro as a company demonstrator, and one bought by a private individual, J. Laurence Hall, which was commandeered by the War Office at the outbreak of World War I). The first prototype was destroyed in a crash on 29 June 1913 that killed its student pilot. Avro 500s were flown by the British armed forces during the first years of the war, mostly as trainers. In service, most were fitted with ailerons and a revised rudder.
Portugal 
United Kingdom Data from Avro Aircraft since 1909 [7]
General characteristics
Performance
The Avro 504 was a First World War biplane aircraft made by the Avro aircraft company and under licence by others. Production during the war totalled 8,970 and continued for almost 20 years, making it the most-produced aircraft of any kind that served in any military capacity during the First World War. More than 10,000 were built from 1913 until production ended in 1932.
The Short L.17 Scylla was a British four-engined 39-seat biplane airliner designed and built by Short Brothers at the request of Imperial Airways to supplement the Handley Page H.P.42 fleet already in service after Handley Page quoted an excessive price for two additional H.P.42s. They were ordered in 1933.
The Bristol Biplane Type 'T', sometimes called the Challenger-Dickson Biplane, was a derivative of the Bristol Boxkite. It was built in 1911 by the British and Colonial Aeroplane Company and was designed as a cross-country racing aircraft for Maurice Tabuteau.
The Roe I Biplane was the first powered aircraft to be designed, built, and flown in England. Designed in an attempt to claim a prize offered by the Brooklands Automobile Racing Club, it was designed and built by Alliott Verdon Roe, who based it on a powered model with which he had won a Daily Mail prize of £75 at Alexandra Palace in April 1907. This prize was substantially larger: the club committee was offering £2,500 for the first person to fly a circuit of their three-mile (4.8 km) race track by the end of the year. In addition the Daily Graphic was offering a £1,000 prize for a flight of more than a mile (1.6 km).
The Roe I Triplane was an early aircraft designed and built by A.V. Roe which was the first all-British aircraft to fly..
The Roe IV Triplane was an early British aircraft designed by Alliott Verdon Roe and built by A.V. Roe and Company. It was first flown in September 1910.
The Avro Type D was an aircraft built in 1911 by the pioneer British aircraft designer A.V. Roe. Roe had previously built and flown several aircraft at Brooklands, most being tractor layout triplanes. The Type D was his first biplane.
The Avro 534 Baby was a British single-seat light sporting biplane built shortly after the First World War.
The Bréguet Type III was an early biplane built by Louis Bréguet in France in 1910.
The Bristol Gordon England biplanes were a series of early British military biplane aircraft designed by Eric Gordon England for the Bristol Aeroplane Company that first flew in 1912. Designed for easy ground transport, the aircraft could be quickly disassembled.
The Sopwith Two-Seat Scout was a 1910s British biplane Anti-Zeppelin scout biplane designed and built for the Admiralty by the Sopwith Aviation Company. It was nicknamed the Spinning Jenny due to a tendency to enter a spin.
The Potez 32 and its military version the Potez 33 was a single-engine French monoplane transport built by Potez and based on the Potez 29 biplane.
The de Havilland DH.27 Derby was a large single-engined biplane designed to a heavy day bomber Air Ministry specification. It did not reach production.
The Royal Aircraft Factory S.E.2 was an early British single-seat scout aircraft. Designed and built at the Royal Aircraft Factory in 1912–13 as the B.S.1, the prototype was rebuilt several times before serving with the Royal Flying Corps over the Western Front in the early months of the First World War.
The Sopwith Admiralty Types 137 and 138 were a pair of single-engine, two-seat naval biplane floatplanes, built to a British Admiralty order in 1914. They were similar in design, but having a more powerful engine the Type 138 was the larger and heavier. They were used in early torpedo dropping experiments in 1914.
The ASL Viking was a single-engined two seater biplane aircraft designed and built by Horatio Barber's Aeronautical Syndicate Ltd. at Hendon. It was first flown in January 1912.
The Short S.36 was a British two-seat tractor biplane, built by Short Brothers for Francis McClean in 1911. It was later developed into the Short S.41 and Short S.45, which were the first of a long series of similar aircraft built for the RNAS and RFC.
The Gabardini biplane was an Italian single seat biplane, designed and built near the beginning of World War I. It was an advanced trainer and could be fitted with engines of output between about 40 to 80 kW.
The Caudron 02 was a French high altitude single seat fighter that was flown in November 1917.
The Tokyo Koku Aiba-Tsubame or Tokyo Aviation Aiba-Swallow was a 1930s Japanese civil transport with seats for three passengers. It was intended to be cheap to produce so, although its fuselage was a new design, its wings and undercarriage were those of another Japanese aircraft. Two were built and flew taxi services and joyrides.