A close up of the ENV engine installation in the Cody Mark IC Cathedral
E.N.V. was an early manufacturer of aircraft engines, originally called the London and Parisian Motor Company, their first model appearing in 1908. E.N.V. engines were used by several pioneer aircraft builders and were produced in both France and the UK until about 1914. They subsequently specialised in camshafts and bevel gear manufacture until 1968 when the name was lost.
The London and Parisian Motor Co. was an Anglo-French venture registered in London in 1908 and largely backed with British capital and expertise. The castings and forgings for its engines were made in Sheffield where the company was originally based, then taken to France for assembly. The reason for this was that there was much more aeronautical activity in France than in England in 1908, but the French were taxing imported machinery. The French works were in Courbevoie in the Paris suburbs.
By 1909 there was more aviation activity in England and E.N.V. decided to begin full manufacture at home, at Willesden, London. At that time a separate company was formed to produce the aero-engines in Willesden, The E.N.V. Motor Syndicate Ltd. E.N.V. was a contraction of French phrase "en-V" ("in a V"), which was a common name at the time for a V-engine. Indeed, most of their engines were in fact 90° V-8s — the idea for the V8 engine itself originated with French engineer Leon Levavasseur in 1902. All of E.N.V.'s V8 engines were water-cooled. The first two models were powerful but heavy, while the later "D" and "F" types were lighter yet reliable, with power ratings of 37hp (26kW) and 74hp (51kW) respectively.
After about mid-1911, these water-cooled engines began to fall out of favour, superseded by the much lighter air-cooledradial engines from Anzani and in particular by the high-performing newcomer, the rotary engine, introduced by the Gnome et Rhône company. A good power-to-weight ratio was rather less critical for use in airship installations, and several used E.N.V. engines. The 100hp (75kW) V-8 submitted to the Naval and Military Aero Engine Contest of 1914 proved to have serious design flaws and as a result of its failure E.N.V withdrew from engine production.[1]
E.N.V. Motors
E.N.V. Motors was incorporated on 30 May 1919 which then acquired on 3 June 1919 the engineering business of Joseph Frederick Laycock who traded under the name of E.N.V. Motor Company at Willesden.[2] The property and assets were acquired for £45,000 and new company invested in new plant and machinery including building a new factory for manufacturing of gearboxes and camshafts for engines and in particular spiral bevel gears.[2] In 1928 the company changed name to E.N.V. Engineering Company Limited.[2]
The company continued successful production of bevel gears and camshafts for another 50 years; it produced individual components for several World War I aircraft and tank engines, and after the war built complete gearboxes for the automobile industry. In 1964 it became part of the Eaton, Yale and Towne group, losing its identity in 1968.[1]
London & Parisian - Motor cars
The London & Parisian were agents and sole concessionaire for the French Hotchkiss and Delage motor cars which it displayed at the Olympia Motor Show from 1909. The company was closed down in 1929.
Engines
E.N.V.'s V-8 engines appeared in six different models. Most of these were identified by a letter, though contemporary sources often refer to them by power. The assignment of the letters C, D, F and T is known from contemporary sources. The one type known to have pre-dated the C has been assigned the letter A by a later historian,[1] a notation followed here. The last engine is usually known as the "1914 100hp E.N.V". The physical details of all the engines, such as bore and stroke etc. are known from both contemporary records and surviving examples. There were also variations within types, as development proceeded. Nonetheless, all the V-8s had much in common. They all had their cylinder banks separated by 90°, leaving space within the V for inlet manifolds and valvegear. All were water-cooled; each cylinder was enclosed with an electrolytically formed copper jacket.[1] Initially these were produced with a variant of the lost wax process. The cylinders were coated with wax, which was then coated with black lead to make it electrically conductive and copper plated. Afterwards the wax was removed by heating.[3] Later, the insulating wax was replaced with electrically conducting, low melting point white metal, simplifying the process.[4]Pistons were made of steel, with cast ironrings, and the crankcases were cast aluminium. There was one plug per cylinder, supplied by a gear-driven magneto alone or with an additional battery-driven ignition coil and distributor for dual ignition.[1]
The types A, C, D and F were all side-valve engines, with valves operated by push rods running exposed and parallel to the cylinder axes, driven within the V from a central, gear-driven camshaft above the crankshaft. All camshafts were hollow for lubrication. The cylinder cooling jackets surrounded the cylinders, then turned inward with flattened faces for inlet and exhaust manifolds and push rods. The exhaust stubs were vertical, each bank of cylinders feeding its own horizontal pipe. The inlet stubs entered the cylinder head at right angles. The earliest type A engines had a pair of inlet tubes, one for each bank and fed from a carburettor at the front. Slightly later model As and types C and F placed the carburettor between the cylinder banks, halfway along the engine axis. Fuel and air was passed to a spherical copper mixing chamber above the carburettor, then via four radial copper tubes which finally branched into pairs the feed the inlet ports symmetrically. The smaller type D retained the end positioned carburettor. These engines all had cast iron cylinders. The types A and C were very similar in construction as well as capacity, but a major change in crankshaft design was introduced with the smaller type D and inherited by the F. The A and C types had a crankshaft supported by only three plain bearings and the width of the central one required a greater space between the second and third cylinder of each bank, visibly dividing each into blocks of two. The crankshafts of the D and F types had five ball race bearings, one between each cylinder and two end bearings; the output thrust bearing was a double race to allow for pusher or tractor configurations. The new bearing arrangement permitted an equal cylinder spacing. The type FA was a type F with an extended crankshaft, mounted in a very prominent, conical crankcase extension. The type T had a similar extension, which in that case at least allowed a larger diameter thrust bearing to be used.[1]
Though heavy, the E.N.V. models A and C provided some of the earliest European fliers with a relatively powerful engine. Some Voisin biplanes used them between 1908 and 1910 and Samuel Franklin Cody fitted his first pusher biplane with a type C in the second half of 1909. His second aircraft also used that engine in the autumn of 1910. The types D and F had significantly better power-to-weight ratios than the first two models and become E.N.V.'s most popular products, being widely used in 1910 and 1911. After that they were eclipsed by the new, light rotary engines.[1][4]
The last two V8's, the T and the 100hp (75kW) were not successful. Though tested, they never flew. The type T introduced steel cylinders and was an overhead-valve engine with vertically mounted valves operated from a central camshaft by thin pull rods and rockers. The carburettor was mounted centrally at the front, feeding a central tube which ran to the back of the engine, divided and ran back along each cylinder bank. Dual magneto/coil and battery ignition was provided. The 100hp (75kW) engine was also an overhead-valve engine in the sense that the port opened directly into the cylinder head, though the valves were mounted horizontally. This arrangement required an unusual shape of combustion chamber but enabled the valves to be operated directly from a central crankshaft raised on pillars to cylinder head height. Vibrations of this crankshaft and weakness of a new cylinder head restraint system dogged the engine, the last E.N.V. made.[1][5]
The three horizontally opposed, four-cylinder, overhead-valve engines that appeared at aircraft shows between October 1909-10 were E.N.V.'s only departure from their standard 90° V8 layout. Technical details are sparse, but the 1909 engine had steel cylinders and combined inlet/exhaust valves. The 30hp 1910 engine had separate steel cylinder heads and barrels, screwed and brazed together. Inlet and exhaust valves were also separated, placed respectively below and above the cylinders and worked by push/pull rods and rockers.[1] Only one of these horizontal engines flew, powering the Neale Monoplane of 1909-10 at Brooklands[6] for a short time.[1]
Production records have been lost, but probably 100-200 E.N.V. engines were made.[1]
Aircraft powered by E.N.V engines, principally the type F, won considerable cash prizes at air meetings during 1909-10. At Heliopolis (near Cairo), in 1910, E.N.V. engines collected FF145,000 of the FF175,000 available prize money.[1]
On 15 October 1910 Walter Wellman, a U.S. citizen, set out from Atlantic City to cross the Atlantic in a 345,000-cubic-foot (9,770 m3) airship that he had built and named America. It had two engines, a 75hp (56kW) Lorraine-Dietrich and a 60hp (45kW) E.N.V. type F. The E.N.V was soon overheating and had to be shut down. After 69 hours of flight and having reached latitude 35°43′W and longitude 68°18′N and having covered a great circle distance of about 1,500 miles (2,400km), they had to ditch, and the six crew were fortunate to be picked unhurt by a passing steamer.[1]
In December 1910, eleven pilots were preparing attempts on the £4,000 Baron de Forest prize for the longest single stage flight, including a crossing of the English Channel, by an Englishman in an all-British aircraft before the end of 1910. Nine of them were using E.N.V. engines. The prize was won by a newcomer to the British aviation scene, T.O.M. Sopwith, in an E.N.V. type F powered Howard Wright pusher biplane. He flew from Eastbourne on the southern coast of England to Beaumont, south of Charleroi in Belgium, a distance of 169 miles (272km) on 18 December.[1][8][9]
Surviving engines
At least six E.N.V. engines are known to have survived. Four are in national museums: a D and an F in the Science Museum, London, an FA in the Musée de l'Air et de l'Espace at Le Bourget, Paris and an F in the National Technical Museum, Prague, though they may not all be on display. A type F, N/S 8, is on display in the Museo Militar de Aviación de la Fuerza Aérea Mexicana (Santa Lucía Air Base) in Mexico.[1] A type F is on display in the United States, mounted in a replica Short S.27 and part of the Old Rhinebeck museum.[10] Samuel Cody's type C is still in the possession of his family.[1]
Related Research Articles
The Ford flathead V8 is a V8 engine with a flat cylinder head designed by the Ford Motor Company and built by Ford and various licensees. During the engine's first decade of production, when overhead-valve engines were used by only a small minority of makes, it was usually known simply as the Ford V‑8, and the first car model in which it was installed, the Model 18, was often called simply the "Ford V-8", after its new engine. Although the V8 configuration was not new when the Ford V8 was introduced in 1932, the latter was a market first in the respect that it made an 8-cylinder affordable and a V engine affordable to the emerging mass market consumer for the first time. It was the first independently designed and built V8 engine produced by Ford for mass production, and it ranks as one of the company's most important developments. A fascination with ever-more-powerful engines was perhaps the most salient aspect of the American car and truck market for a half century, from 1923 until 1973. The engine was intended to be used for big passenger cars and trucks; it was installed in such until 1953, making the engine's 21-year production run for the U.S. consumer market longer than the 19-year run of the Ford Model T engine for that market. The engine was on Ward's list of the 10 best engines of the 20th century. It was a staple of hot rodders in the 1950s, and it remains famous in the classic car hobbies even today, despite the huge variety of other popular V8s that followed.
The Junkers L 5 was a six-cylinder, water-cooled, inline engine for aircraft built in Germany during the 1920s. First run in 1925, it was a much enlarged development of the Junkers L2.
The Green Engine Co was a British engine company founded by Gustavus Green in Bexhill to sell engines of his design. He flourished especially as a designer of aeroplane engines during the first two decades of the 20th century. The engines were actually manufactured by the Aster Engineering Company.
The Anzani 10 was a 1913 10-cylinder air-cooled radial aircraft engine. It powered several experimental aircraft and also the later production versions of the Caudron G.3 reconnaissance aircraft, the Caudron G.4 bomber/trainer and the first production Cessna, the Model AA.
A V8 engine is an eight-cylinder piston engine in which two banks of four cylinders share a common crankshaft and are arranged in a V configuration.
The Advance Motor Manufacturing Company was a British motorcycle and engine manufacturer established in 1905. As well as supplying aircraft engines to the pioneering monoplane developers, Advance engines were also used by Captain Robert Scott to power Antarctic snow sleds. After the end of the Second World War the company was sold to Sheepbridge Engineering and became a motor supplies organisation.
From 1905 to 1915, Alessandro Anzani built a number of three-cylinder fan engines and radial engines, one of which powered Louis Blériot's 1909 cross-channel flight. An Anzani three-cylinder engine that powers a Blériot XI operated by The Shuttleworth Collection in England is thought to be the oldest airworthy engine in the world.
Alessandro Anzani developed the first two-row radial from his earlier 3- cylinder Y engine by merging two onto the same crankshaft with a common crankweb.
The 1913 20-cylinder Anzani air-cooled radial engine was the first four row radial and one of the most powerful engines of its period, though few were used.
The Bugatti U-16 was a 16-cylinder water-cooled double-8 vertical in-line "U engine", designed by Ettore Bugatti in 1915 to 1916 and built in France in small numbers. The US Bolling Commission bought a license to build the engine in the US, and small numbers of a slightly revised version were built by the Duesenberg Motor Corporation as the King-Bugatti. Probably about 40 King-Bugattis were made before the end of World War I caused building contracts to be canceled.
The Renault 70 hp, was a French V-8 aero engine that first ran in 1910. The type powered many early military aircraft including the Farman MF.7 Longhorn and the Royal Aircraft Factory B.E.2. In addition to French production, these engines were also built in the United Kingdom and equipped the majority of British aircraft sent to France at the start of WW1.
The Green D.4 was a four-cylinder watercooled inline piston engine produced by the Green Engine Co in the UK in 1909. It produced about 60 hp (45 kW) and played an important role in the development of British aviation before World War I.
The de Havilland Iris was a British four-cylinder, liquid-cooled, horizontally opposed aero engine. Notable as the first aero engine to be designed by Geoffrey de Havilland it was produced in small numbers between 1909 and 1910 by Iris Cars Ltd of Willesden from which it took its name.
The Lorraine 12H Pétrel was a French V-12 supercharged, geared piston aeroengine initially rated at 370 kW (500 hp), but later developed to give 640 kW (860 hp). It powered a variety of mostly French aircraft in the mid-1930s, several on an experimental basis.
The Fiat AN.1 was an experimental Italian water-cooled diesel straight six cylinder aircraft engine from the late 1920s.
The Renault 100 hp, or 12B, aircraft engine from 1912 was a twelve-cylinder, air cooled 60° vee engine built by the French Renault company.
The Argus 50 hp aircraft engine, from 1909 was a four-cylinder, water cooled inline engine built by the German Argus Motoren company.
The Rapp 100 hp was a four-cylinder, SOHC valvetrain liquid-cooled inline aircraft engine built by Rapp Motorenwerke. The engine originated from Karl Rapp's earlier 90 hp four-cylinder that he had designed at the Flugwerk Deutschland GmbH for the 1912/13 Kaiserpreis aircraft engine contest.
The Renault 50/60 hp aircraft engines were a series of air cooled 90° V-8 engines with a bore and stroke of 90 mm × 120 mm built by the French Renault company in the years from 1908 to about 1911.
The Peugeot 8Aa, or L112, is a water-cooled V8 aircraft engine that equipped the 1,123 Voisin VIII bombers and fighters built during WW1. The 8Aa was the first engine designed by Peugeot for airplane use and the only one that saw service in WW1. In publications the engine is often referred to as the Peugeot 200 hp, or 220 hp. Voisin VIIIs formed the bulk of the French night bomber force through 1916-17 before being replaced in front line service by the Voisin X which was fitted with the more powerful and reliable Renault 12Fe.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
