Birdman Project 102

Last updated
Project 102
RoleUltralight motor glider
National origin Canada
Manufacturer Birdman Enterprises
DesignerDr David Marsden
First flight1982
StatusExperimental
Number built1

The Birdman Project 102, also known as Windsoar, was an experimental high wing, single engine, pod-and-boom, conventional landing gear-equipped, ultralight motor glider originally intended for production by Birdman Enterprises. [1]

Contents

Development

Project 102 was intended to result in a production lightweight motor glider and was designed in 1981 by David Marsden from the University of Alberta with assistance from Birdman Enterprises' designer Vladimir Talanczuk. The production aircraft was tentatively named the Birdman Windsoar. [1]

The Project 102 aircraft was built from aluminum and foam. The all-metal wing was cantilever, stressed to +6/-6 g and featured full-span reflexing ailerons that could be raised to increase cruise performance, as well as winglets. The wing centre was covered with aircraft fabric. The cockpit included a windshield, with the sides left open, although a full enclosure was intended to be optional. The conventional low tail was mounted on a long aluminum tail boom. [1]

The single engine was in pusher configuration and was planned for 10 to 25 hp (7 to 19 kW). [1]

The Windsoar was planned to be delivered to buyers as an assembly kit that would take about 100–200 hours to complete. The major structural assembly would be completed at the factory and the builder would have been required to complete the bolting and riveting, as well as installing the fabric. [1]

Project 102 was supposed to fly in the summer of 1982, with kit production commencing the following autumn and winter and customer deliveries in the spring of 1983. [1] The aircraft never entered production.

Specifications (Project 102)

General characteristics

Performance

Related Research Articles

Monnett Monerai

The Monnett Monerai is a sailplane that was developed in the United States in the late 1970s for homebuilding. It is a conventional pod-and-boom design with a V-tail and a mid-mounted cantilever wing of constant chord.

SZD-45 Ogar

The SZD-45 Ogar (Greyhound) is a T-tailed cantilever high-wing monoplane of wooden, aluminium and fibreglass construction designed and manufactured in Poland.

Fisher FP-101

The Fisher FP-101 is an American single-seat, high-wing, conventional landing gear, tractor configuration single engine ultralight aircraft that was available in kit form from Lite Flite of South Webster, Ohio and later Fisher Flying Products of Edgeley, North Dakota.

The Birdman Atlas is a single-seat, high wing, single engine in pusher configuration, ultralight aircraft that was based upon the Eipper Quicksilver design.

The InterPlane Griffon is a single seat, high wing, single engine, pusher configuration, tricycle gear ultralight aircraft, that was produced in kit form from InterPlane Aircraft of Zbraslavice, Czech Republic.

InterPlane Skyboy

The InterPlane Skyboy is a two-seat, side-by-side, high wing, single engine, pusher configuration ultralight aircraft that was manufactured as a completed aircraft by InterPlane Aircraft of Zbraslavice, Czech Republic.

CGS Hawk

The CGS Hawk is a family of high wing, strut-braced, pusher configuration, single and two-seats-in-tandem ultralight aircraft, designed by Chuck Slusarczyk and manufactured by CGS Aviation.

The Kolb Slingshot is an American tandem two seat, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft, that was produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.

The Kolb Flyer is an American single seat, high wing, strut-braced, twin-engine, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania, and intended for amateur construction.

The Kolb Ultrastar is an American single seat, high wing, strut-braced, single engine, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.

The Alpaero Exel is a French single seat, single engine pusher pod-and-boom kit-built ultralight motor glider. About 10 had been produced by 2005.

Rans S-12 Airaile

The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.

Radab Windex

The Radab Windex is a family of Swedish high-wing, single-seat aerobatic gliders and motor gliders that was designed by Sven Olof Ridder and produced initially by Radab and later by WindexAir AB as a kit for amateur construction.

The US Aviation Cumulus is an American low-wing, single-seat, open cockpit motor glider that was designed by Dave Ekstrom and produced by US Aviation, supplied in kit form for amateur construction.

The Air Est Goeland, sometimes called the Clavé Goéland, after the designer, is a French parasol-wing, T-tailed, single-seat motor glider that was designed by Robert Clavé and produced by Air Est Services of Marly, Moselle in kit form for amateur construction.

The Air Est JCD 03 Pelican is a French mid-wing, twin tailed, flying wing single-seat motor glider that was designed by Jean-Claude Debreyer and produced by Air Est Services of Marly, Moselle and supplied as a kit for amateur construction or as a complete aircraft.

The TeST TST-3 Alpin T is a Czech shoulder-wing, T-tailed, single-seat glider and motor glider that was designed and produced by TeST of Brno.

The Alpaero Sirius, also called the Noin Sirius, is a French high-wing, strut-braced, pod-and-boom, cruciform tail, single-seat motor glider that was designed by Claude Noin and produced by his company, Alpaero of Châteauvieux, Hautes-Alpes. It was available as plans for amateur construction and also as a kit, but has been discontinued.

The Kortenbach & Rauh Kora 1 was an unusual twin boom, pusher configuration motor glider, designed and built in Germany in the 1970s and intended as a training aircraft.

The VFW-Fokker FK-3 is a single seat competition glider, built in Germany in the late 1960s. It had success at the Italian and Austrian national contests of 1968, resulting in a short production run the following year.

References

  1. 1 2 3 4 5 6 Taylor, John WR: Janes All the Worlds Aircraft 1982-83 page 626, Janes Publishing Company, 1982. ISBN   0-7106-0748-2
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.