Calumet Snobird Explorer

Snobird Explorer
Role	Autogyro
National origin	United States
Manufacturer	Calumet Motorsports
First flight	May 1997
Status	Production completed
Number built	at least 1 of all manufacture

Last updated September 28, 2023

The Calumet Snobird Explorer was an American autogyro designed and produced by Calumet Motorsports of Lansing, Illinois, introduced in May 1997. Now out of production, when it was available, the aircraft was supplied as a kit for amateur construction.^[1]

Design and development

Calumet Aeronautics, owned and operated by Tommy Milton, designed an entry level Ultralight gyroplane. Calumet Aeronautics then purchased the assets of the SnoBird Aircraft Company. After moving the assets from Bristol, TN. to Lansing, IL. Tommy Milton and partner, George Smundin inventoried the SnoBird assets and decided to put the entire Snobird line back in production after evaluating the design integrity and high quality of the manuals. Tommy and George decided to put the Snobird line back into production. The company name was changed to Calumet Motorsports due to the difficulty of purchasing bearings and other critical components. The gyroplane business grew and an additional partner was taken on who, eventually bought out Tommy and George. The new owner later sold the business. The new owner sold parts of the business back to Calumet Motorsports. The new owner resold the business once again and the design remains out of production.^[2]

The Snobird Explorer was designed as a low-cost, entry-level autogyro, to comply with the US FAR 103 Ultralight Vehicles, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 244 lb (111 kg). It features a single main rotor, a single-seat open cockpit, tricycle landing gear and a twin-cylinder, air-cooled, two-stroke, single-ignition 40 hp (30 kW) Rotax 447 engine in pusher configuration.

The aircraft fuselage is made from a combination of composite material and aluminum and features a tall tail design to reduce engine-induced yaw. The kit was supplied with jig pre-drilled holes and was powder coated. Its two-bladed rotor has a diameter of 23.0 ft (7.0 m). Full fuel is 5 U.S. gallons (19 L; 4.2 imp gal).^[1]

The standard day, sea level, no wind takeoff with a 40 hp (30 kW) engine is 100 ft (30 m) and the landing roll is 20 ft (6 m).^[1]

Operational history

By 1998 the company reported that one aircraft had been completed and was flying, with customer deliveries to commence later in 1998.^[1]

In April 2015 six examples of Snobird autogyros of all manufacture were registered in the United States with the Federal Aviation Administration, although a total of 14 had been registered at one time.^[3]

Specifications (Snobird Explorer)

Data from Purdy^[1]

General characteristics

Crew: one
Empty weight: 244 lb (111 kg)
Fuel capacity: 5 U.S. gallons (19 L; 4.2 imp gal)
Powerplant: 1 × Rotax 447 twin cylinder, air-cooled, two stroke aircraft engine, 40 hp (30 kW)
Main rotor diameter: 23 ft 0 in (7.01 m)
Main rotor area: 415 sq ft (38.6 m²)
Propellers: 2-bladed wooden, fixed pitch

Performance

Cruise speed: 60 mph (97 km/h, 52 kn)
Rate of climb: 700 ft/min (3.6 m/s)

Related Research Articles

The Magni M-16 Tandem Trainer is an Italian sport autogyro, seating two in tandem, designed and produced by Magni Gyro srl of Besnate. It and the M-22 Voyager, a touring variant with baggage space and increased endurance, remain in production in 2010 with over 150 sold.

The Air Command Commander is an American autogyro that was designed and produced by Air Command International, with its first flight in 1984. Production was completed by 2003. The aircraft was supplied as a kit for amateur construction.

The Brock KB-3 is an American autogyro that was designed by Ken Brock, produced by Ken Brock Mfg and introduced in 1985. The aircraft was supplied as a kit for amateur construction and was also available as plans.

The Sport Copter Lightning is an American autogyro, designed and produced by Sport Copter of Scappoose, Oregon. The aircraft is supplied as a kit for amateur construction.

The Air Command Commander Elite is an American autogyro that was designed and produced by Air Command International of Caddo Mills, Texas. When it was available the aircraft was supplied as a kit for amateur construction or as a conversion kit for the earlier Air Command Commander.

The Air Copter A3C is a French autogyro, designed and produced by Air Copter of Lherm, Haute-Garonne. The aircraft is supplied as a kit for amateur construction.

The AutoGyro MT-03 is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft.

The Layzell Merlin is a British autogyro that was designed by Scottish designer Jim Montgomery and produced by Layzell Gyroplanes of Quedgeley, Gloucester. The aircraft was supplied as a kit for amateur construction.

The Magni M-18 Spartan is an Italian autogyro, that was designed and produced by Magni Gyro srl of Besnate. The aircraft was supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft

The Midwest Hornet is an American autogyro that was designed by Don Shoebridge and made available by Midwest Engineering & Design in the form of free plans for amateur construction.

The North American Rotorwerks Pitbull Ultralight is an American autogyro, designed and produced by North American Rotorwerks of Tukwila, Washington. When it was available the aircraft was supplied as a kit for amateur construction, but by 2013 production had been suspended.

The North American Rotorwerks Pitbull II is an American autogyro, designed and produced by North American Rotorwerks of Tukwila, Washington. When it was available the aircraft was supplied as a kit for amateur construction, but by 2013 production had been suspended.

The Air Command Commander Sport is an American autogyro that was designed and produced by Air Command International of Wylie, Texas. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Amax Double Eagle TT is an Australian autogyro that was designed and produced by Amax Engineering of Donvale, Victoria in the late 1990s. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Vortech Sparrow is an American autogyro that was produced by Vortech of Fallston, Maryland. When it was available the aircraft was supplied in the form of plans for amateur construction. Vortech also supplied rotor blades and some key parts for the design.

The Little Wing Roto-Pup is an American autogyro that was designed and produced by Little Wing Autogyros, Inc. of Mayflower, Arkansas, introduced in the 1990s. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Raven Explorer I is an American autogyro that was designed and produced by Raven Rotorcraft of Boulder Colorado and later El Prado, New Mexico, introduced in the 1990s. Now out of production, when it was available the aircraft was supplied as a kit, for amateur construction.

The Rotorwing-Aero 3D-RV is an American autogyro that was designed by Monte Hoskins and produced by Rotorwing-Aero of Salt Lake City, Utah, introduced in 1989. Now out of production, when it was available the aircraft was supplied in the form of plans for amateur construction.

Calumet Motorsports Was an American aircraft parts manufacturer and former aircraft kit manufacturer based in Lansing, Illinois and founded by Tommy Milton. The company specialized in the design and manufacture of autogyro parts and at one time produced whole aircraft kits for amateur construction in the US including FAR 103 Ultralight Vehicles category.

The DTA J-RO (transl. gyro) is a French autogyro designed and produced by DTA sarl of Montélimar. The aircraft is supplied complete and ready-to-fly.

References

1 2 3 4 5 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 348. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1
↑ "Calumetair - Gyroplanes & accessories". CalumetAir. Archived from the original on April 27, 2015. Retrieved April 19, 2015.
↑ Federal Aviation Administration (April 19, 2015). "Make / Model Inquiry Results" . Retrieved April 19, 2015.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[Aerocrafter-1] 1 2 3 4 5 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 348. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1

[2] "Calumetair - Gyroplanes & accessories". CalumetAir. Archived from the original on April 27, 2015. Retrieved April 19, 2015.

[FAAReg-3] Federal Aviation Administration (April 19, 2015). "Make / Model Inquiry Results" . Retrieved April 19, 2015.

[1]

[2]

[3]