Carro Armato P.43

Last updated
P43 Bis
P43 Bis.jpg
The only model crafted in metal P43 Bis
Type Heavy tank
Place of originFlag of Italy (1861-1946) crowned.svg  Italy
Production history
DesignedApril 1943
Specifications
MassOver 29 tonnes (33 short tons)
Length8.16 m (26 ft 9 in)
Width3.04 m (10 ft)
Height2.24 m (7 ft 4 in)
Crew5

Armor 80-100 mm (frontal) 50mm (lateral)
Main
armament
1x Ansaldo Cannone da 90/42 (?) 64 rounds
EngineV12 Diesel
420 hp
Power/weight14 hp/t
Maximum speed 40 km/h (25 mph)

The P.43 Bis was a proposed Italian heavy tank (P=pesante; in english: heavy) designed in April 1943,. [1] It was created as a direct continuation and replacement P26/40 tank; however only a prototype was manufactured at the end of the summer of 1943.

Contents

Features

The P43 or P 30/43 was developed by FIAT and Ansaldo simultaneously with the P26/40, of which it was supposed to be a heavier version. The vehicle was planned to have weighed at least 30 tons and would have mounted an engine of 420 hp. The gun was the same as the P.26 - the 75/34 mm cannon. While it was still in the design phase, it was proposed to use the 90/42 gun derived from anti-aircraft Cannone da 90/53, [2] [3] or the 105/25 mm cannon mounted on the Semovente da 105/25 instead. [4]

P43 bis

Model of P43 bis P43bis-2.jpeg
Model of P43 bis

A photograph of P43 as a wooden mockup exists (probably on a smaller scale) along with other models of P40 and P43 bis, 30 tons with cannon that looks like it could be a lighter version of the 90/53 piece. In the same picture, there is a model of a German Panther version slightly smaller and with what is likely a 90/53 cannon. It is possible that the German part stigmatized the P43 as a plagiarism of the Panther tank (that Italy had received blueprints for the production in license). It seems that this model has received the abbreviation P43 bis (perhaps for the observed inability to get quickly to the production of the P43 with a piece of 90 mm).

This overlap of studies can be originated either by news from the Russian front on the new Soviet medium tank T-34/85 of 32 tons and with 85 mm cannon (derived from the anti-aircraft gun) or by the availability of data and drawings of the German Panther.

According to various publications the engines should have been these:

Frontal protection of 80/100 mm would guarantee equal performance with the machines designed by other nations, such as the Russian 1944 IS-2 of 46 tons (which was 122 mm), the Tiger I of 57 tons and higher than the Panther of 45 tons, which was 80 mm.

The front of the P43 can be seen in the second picture Carro Armato P43.jpg
The front of the P43 can be seen in the second picture

However the P43 was only made in a prototype in 1943.

The P43 was the pinnacle of Italian tank design during WW2. The Italians goal with this vehicle was to create a somewhat equivalent of the Panther and Tiger tanks used by their Allie’s.This tank’s design was obviously a natural progression of the P40. The tank only reached the wooden mock-up stage. However, the proposed armaments for the tank did exist in sufficient numbers. Two cannons looked at for the tank as its main armament. The first was the 90/53 mod.41 cannon already found in the tech tree on the M41M. The second was the 105/25 M43 cannon found on the M43.A lightened version of the 90mm was chosen to be used as it had better anti tank performance and was a lighter cannon. This likely would have similar penetration values as the current SPG, with its best round at point blank range penetrating 158mm of armor.The engine used was a similar design to the P40, but was the 420HP SPA 8 cylinder diesel engine. This was to be used with the same suspension design used on the P40 and M43 vehicles.The frontal armor of the vehicle was said to be 80-100mm thick and 50mm on the sides. It is likely 80mm thick sloped on the front to conserve weight as the vehicle was proposed to weigh 33 tons. This weight and engine power gives it a ratio of 12.7 HP per ton. Using the same track width as the P40, one would expect similar mobility.The Italian army and authorities ordered 150 units of P43 heavy tanks to be produced before June 1944, while at the same time the number of P40 tanks was reduced from 1200 to only 500 units because the P40 tank was considered to be obsolete. Historyforce [5]

See also

Notes

  1. "Tank Archives: Heavy Tank, Italian Style". Tank Archives. 2019-11-02. Retrieved 2019-11-12.
  2. "november 2008".
  3. "Тяжёлый танк по-итальянски". warspot.ru (in Russian). Retrieved 2019-11-12.
  4. Cesare Falessi, Benedetto Parfi, Veicoli da combattimento dell'Esercito Italiano dal 1939 al 1945Intyrama books, 1976, pagg. 83-84
  5. Historyforce: P43

Bibliography

Related Research Articles

<span class="mw-page-title-main">Tank destroyer</span> Type of armoured fighting vehicle designed to engage and destroy enemy tanks

A tank destroyer, tank hunter or tank killer is a type of armoured fighting vehicle, predominantly intended for anti-tank duties. They are typically armed with a direct fire artillery gun, also known as a self-propelled anti-tank gun, or missile launcher, also called an anti-tank missile carrier. The vehicles are designed specifically to engage and destroy enemy tanks, often with limited operational capacities.

<span class="mw-page-title-main">Kliment Voroshilov tank</span> WWII Soviet heavy tank

The Kliment Voroshilov (KV) tanks are a series of Soviet heavy tanks named after the Soviet defence commissar and politician Kliment Voroshilov who operated with the Red Army during World War II. The KV tanks were known for their heavy armour protection during the early stages of the war, especially during the first year of the German invasion of the Soviet Union. In certain situations, even a single KV-1 or KV-2 supported by infantry could halt German formations. The German Wehrmacht at that time rarely deployed its tanks against KVs, as their own armament was too poor to deal with the "Russischer Koloss" – "Russian Colossus".

<i>Entwicklung</i> series Late-War German tank project

The Entwicklung series, more commonly known as the E-Series, was a late-World War II attempt by Nazi Germany to produce a standardised series of tank designs. There were to be standard designs in five different weight classes from which several specialised variants were to be developed. Design standardisation was envisioned to bring improvements over extreme complexity of previous tank designs that resulted in poor production rates and mechanical unreliability.

<span class="mw-page-title-main">T-44</span> Soviet medium tank

The T-44 was a medium tank developed and produced near the end of World War II by the Soviet Union. It was the successor to the T-34, offering an improved ride and cross-country performance, along with much greater armor. Designed to be equipped with an 85 mm main gun, by the time it was fully tested the T-34 had also moved to this weapon. Both tanks offered similar performance, so introducing the T-44 was not considered as important as increasing T-34 production. Fewer than 2,000 T-44s were built, compared to about 58,000 T-34s. Although the T-44 was available by the end of the war, it was not used in any battle. It was 1 ton lighter than the T-34-85 and slightly faster. The T-44 was heavily influential on the design of the T-54/55 main battle tank, most prominently lower hull and turret profiles. Also notable was the T-44-100, a 100mm D-10T-armed prototype, which would be the same 100mm gun mounted on the T-54/55, bar some minor changes.

<span class="mw-page-title-main">M13/40 tank</span> Italian World War II medium tank

The Carro Armato M13/40 was an Italian World War II tank designed to replace the M11/39 in the Royal Italian Army at the start of World War II. It was the primary tank used by the Italians throughout the war. The design was influenced by the British Vickers 6-Ton and was based on the modified chassis of the earlier M11/39. Production of the M11/39 was cut short in order to get the M13/40 into production. The name refers to "M" for Medio (medium) according to the Italian tank weight standards at the time, 13 tonnes was the scheduled weight and 1940 the initial year of production.

<span class="mw-page-title-main">M15/42 tank</span> Medium Tank

The Carro Armato M15/42 was the last Italian medium tank produced during World War II. It was based on the earlier M13/40 and M14/41 medium tanks, and was built with the lessons from the North African Campaign in mind. The tank was meant to be a stopgap until the heavier P26/40 tank could be produced in numbers. It did not serve in North Africa, the theatre in which it was intended to operate, but served in Italy and in Yugoslavia with the German Wehrmacht.

<span class="mw-page-title-main">P26/40 tank</span> Heavy tank/Medium tank

The P 26/40 was an Italian World War II heavy tank. It was armed with a 75 mm gun and an 8 mm Breda machine gun, plus another optional machine gun in an anti-aircraft mount. Design had started in 1940 but very few had been built by the time Italy signed the armistice with the Allies in September 1943 and the few produced afterwards were used by the Germans.

<span class="mw-page-title-main">Tanks in World War II</span> Overview of tanks in World War II

Tanks were an important weapons system in World War II. Although tanks in the inter-war years were the subject of widespread research, few were made, in just a few countries. However, during World War II, most armies employed tanks, and thousands were built every month. Tank usage, doctrine, and production varied widely among the combatant nations. By war's end, a consensus was forming on tank doctrine and design.

<span class="mw-page-title-main">ARL 44</span> French heavy tank/tank destroyer

The ARL 44 was a French heavy tank and tank destroyer, the development of which started just before the end of the Second World War. Only sixty of these tanks were ever completed, from 1949 onwards. The type proved to be unsatisfactory and only entered limited service. The tank was phased out in 1953.

<span class="mw-page-title-main">Semovente da 105/25</span> Self-propelled gun

The Ansaldo 105/25 M43, also known as Semovente 105/25, was an Italian self-propelled gun used during World War II and designed by Ansaldo. It was the most powerful self-propelled gun built by Italy in numbers during World War II.

<span class="mw-page-title-main">AMX-50</span> Medium Tank/heavy tank (lowered variant)

The AMX 50 or AMX-50 is a French heavy tank designed in the immediate post Second World War period. It was proposed as, in succession, the French medium, heavy, and main battle tank, incorporating many advanced features. It was cancelled in the late 1950s however, due to unfavourable economic and political circumstances after serious delays in development.

The 20/25TP was a Polish medium tank concept that was never built. There were three projects designed by KSUS and BBTBr.Panc. and PZInż which even managed to build a wooden model of it. The name 20/25TP is not official; it was created by the author Janusz Magnuski analogously to nomenclature used for other Polish tanks of that period. According to different classification it could be medium tank or heavy tank.

<span class="mw-page-title-main">Stridsvagn m/42</span> Swedish medium tank

Stridsvagn m/42 was a Swedish medium tank in service in the World War II period. Known by its manufacturer AB Landsverk as Lago II-III-IV, it fielded a 75 mm L/31 gun, the first of its size in a Swedish tank. It entered service with the Swedish Army in April 1943. Modern in design and mobile, a total of 282 were produced.

The Lancia Ro, Lancia Ro-Ro and Lancia 3Ro were 4x2 heavy trucks built by Italian manufacturer Lancia from the 1930s through the 1940s for military and civilian use. The 2-cylinder diesel Ro was produced from 1933 to 1939, the 3-cylinder diesel Ro-Ro from 1935 to 1939 and the improved 5-cylinder diesel 3Ro from 1938 to 1947.

<span class="mw-page-title-main">Semovente da 75/18</span> Self-propelled gun

The Semovente da 75/18 was an Italian self-propelled gun of the Second World War. It was built by mounting the 75 mm Obice da 75/18 modello 34 mountain gun on the chassis of a M13/40, M14/41 or M15/42 tank. The first 60 were built using the M13/40 chassis and a subsequent 162 were built on the M14/41 chassis from 1941 to 1943. A total of 190 were built utilizing the M42 chassis before the armistice and an additional 55 were built afterwards. The Semovente da 75/18 was intended to be an interim vehicle until the heavier P40 tank could be available.

<span class="mw-page-title-main">Freccia IFV</span> Italian wheeled infantry fighting vehicle

The VBM – Freccia is a family of 8x8 armoured vehicles that was designed and manufactured for the Italian Army by IVECO for the hull, the engine and the suspension, and OTO Melara for the armament. The first variant to be developed was the IFV, the Freccia being equipped with a Hitfist turret, the same as the one installed on the Dardo IFV.

The 44M Tas was a Hungarian heavy tank/medium tank design of World War II. It was developed to combat heavily armored Soviet tanks encountered on the Eastern Front and to replace the older Turán I and Turán II tanks which Hungary operated, modernising Hungary's armoured forces. The Tas somewhat resembled the German Panther tank in terms of both looks and capabilities. It was to be well armored – up to 120 mm thick and with sloped armor. The main armament would likely have been a Hungarian built heavily modified anti-tank version of the 80 mm Bofors AA gun. The only prototypes built were destroyed when the Americans bombed the Weiss Manfréd factory in July 1944.

<span class="mw-page-title-main">Tanks in the Italian Army</span> History of tanks used or produced by Italy

Tanks have been employed by the military forces in Italy since their first use in World War I. They have had continued use in wars after and are still used through the modern day. The C1 Ariete is the current main battle tank of the Italian Army.