Ceramic petrography

Last updated

Ceramic petrography (or ceramic petrology) is a laboratory-based scientific archaeological technique that examines the mineralogical and microstructural composition of ceramics and other inorganic materials under the polarised light microscope in order to interpret aspects of the provenance and technology of artefacts. [1]

Contents

The process of ceramic petrography involves careful sample preparation. Small sections of the ceramic material are carefully ground down to a thickness of approximately 0.03 mm and then mounted on glass slides. These thin sections allow for the examination of the internal structure of the ceramics and facilitate the identification of mineral phases, crystalline structures, and textural features. The methodology of ceramic petrography draws upon principles from various fields, including optical mineralogy, thin section petrography, and soil micromorphology

Methods

While there are multiple scientific methods that can be adopted to help scientists ascertain the elemental composition of the ceramics, below are the four most common methods:

LA-ICP-MS (Laser Ablation – Inductively Coupled Plasma – Mass Spectrometry)

Depiction of how LA-ICP-MS works La-icp-ms example 2.gif
Depiction of how LA-ICP-MS works

One of the increasingly used methods includes the use of LA-ICP-MS. [2] In LA-ICP-MS, a laser beam is focused on a sample surface, causing it to vaporize and form a high-temperature plasma. This plasma is then introduced into an inductively coupled plasma (ICP) source, where further ionization and excitation occur. The resulting ions are then analysed using a mass spectrometer (MS). [3]

XRF (X-ray fluorescence)

XRF (X-ray fluorescence) is also a common technique and is useful for both qualitative and quantitative data on ceramic samples. By analysing variations in secondary (fluorescent) X-rays scientists can identify, with significant accuracy, the various elements in the ceramic. [4]

EPMA (Electron Plate Analysis)

EPMA determines elemental composition by bombarding a sample with an electron beam, causing it to emit characteristic X-rays. These X-rays are detected and analysed to identify elements. With high precision, EPMA is widely used in materials science, geology, and other fields. It helps understand material properties and investigate atomic-level details. By comparing detected X-rays with known standards, EPMA quantifies elements present in the sample. [5]

SEM-EDS (Scanning Electron Microscopy / Energy Dispersive Spectroscopy)

SEM-EDS combines Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) to analyse a ceramics surface and elemental composition. SEM scans the sample with an electron beam to create high-resolution images of its surface morphology. Simultaneously, EDS detects characteristic X-rays emitted by the sample, providing information about its elemental composition. SEM-EDS is widely used in materials science and geology to study microscale features, identify materials, and analyse elemental variations. It is a powerful tool for understanding surface characteristics and elemental makeup in a wide range of samples. [6]

History and uses

Ceramic petrography is used in academic archaeological research and commercial archaeology to address a range of issues. A common goal is tracing the movement of pottery and associated trade through provenance determination. The principle of provenance ascription with ceramic petrography relies on the fact that "the mineral and rock inclusions within a paste are a reflection of the geology of the source area of the ceramics" [7] and that potters did not transport ceramic raw materials over significant distances. [8]

An equally important concern is the nature of ancient ceramic production and its meaning in terms of the knowledge, skills, identity and traditions of potters. As synthetic materials, ceramics are "sensitive indicators of human decision making and materials interaction". [9] By examining microstructural evidence for processes such as clay paste preparation, forming and firing, ceramic petrographers can reconstruct the steps involved in the production of ceramic artefacts.

Ceramic petrography originated in the American Southwest with the work of Anna O. Shepard [10] but has mainly been developed in the Old World in the later half of the 20th century. Other early studies include the work of David Peacock and his students in the UK [11]

Ceramic petrography continues to be applied to the interpretation of British ceramics [12] [13] [14] and is used heavily in the prehistoric Aegean. [15] [16] [17] In the USA the approach is less popular, though important contributions have been made in the area of quantitative petrography. [18] Other attempts to extend ceramic petrography include the use of automated image analysis, [19] the palaeontological analysis of microscopic fossils within ceramic thin sections [20] and the combined statistical classification of petrographic and chemical data from artefacts. [21]

Examples of Ceramic Petrography in archaeological settlements:

Linear Pottery Culture

Ceramic Petrography has been used extensively in the study of the Linear Pottery Culture (LBK), a European Neolithic culture dating to around 5550 BCE – 4500 BCE. Petrographic analysis has allowed archaeologists to classify LBK ceramics and establish chronological sequences. It has also allowed archaeologists to source raw materials, understand trade routes, and analyse the various production methods. By examining the mineralogical composition and microstructure of LBK pottery, researchers have identified geological sources of raw materials, revealing procurement strategies and exchange networks. Additionally, petrographic analysis has provided insights into pottery manufacturing, including clay selection, forming techniques, surface treatments, and firing methods, contributing to our understanding of technological advancements and cultural practices. Through ceramic petrography, archaeologists can now understand far more about this culture, even with limited material to work with. Indeed, ceramic petrography has shed light on LBK typology, chronology, raw material procurement, trade networks, and technological innovations within the broader context of Neolithic Europe. [22]

Pavlopetri

Ceramic petrography has also been used in underwater locations, where excavations and analysis of remains can prove far more challenging. For example, in the submerged city of Pavlopetri (C. 3500 – 1500BCE) scientists have used petrography to examine the mineralogical make-up and microstructure of underwater pottery, allowing archaeologists to gain an insight into the trade routes, production methods, and various other cultural practices that the inhabitants of Pavlopetri adopted. From this analysis, scholars have been able to link Pavlopetri to trade in Minoan Crete. [23]

Tang and Song Dynasties

Material from the Tang and Song dynastyies (C. 618–1279 A.D) has also been excavated and analysed using ceramic petrography, revealing a plethora of information on trade links, as well as stylistic elements. The Tang dynasty in Shanghai is well-known for its three-colour pottery and its bright colours. After analysing the remains of these artefacts, scientists have been able to trace trade over time, and can now see that maritime trade was only established later on in its history.

Tang Dynasty Ceramics (C. 607-918 AD) Updated Ceramic Tang dynasty.png
Tang Dynasty Ceramics (C. 607-918 AD)

Qinglong town, the heart of the dynasty was a prosperous maritime economy, with extensive links to adjacent islands. Indeed, through analyses of pottery from Qinglong and surrounding areas, archaeologists have discovered that the Tang and Song Dynasties had trade links with Persians, Arabs, Hindu Indians, Malays, Bengalis, Sinhalese, Khmers, Chams, Jews and Nestorian Christians of the Near East - a vast trade network that helps to explain the wide array of colours and materials in their ceramics. [24]

Other uses

Thin section archaeological petrography can be applied to a range of other artefact types in addition to ceramics; these include plaster, mortar, mudbricks and lithic implements. [25] It was also used for provenance and technology studies of the Amarna letters, [26] as well as cuneiform tablets from the archives of Hattusa [27] and the Southern Levant. [28]

Academic papers on ceramic petrography are often published in journals such as Archaeometry, Journal of Archaeological Science and Geoarchaeology, as well as edited volumes. [29] [30] [31] Petrographic research is often presented at the International Symposium on Archaeometry, the European Meeting on Ancient Ceramics and the meetings of the Ceramic Petrology Group.

Related Research Articles

Particle-induced X-ray emission or proton-induced X-ray emission (PIXE) is a technique used for determining the elemental composition of a material or a sample. When a material is exposed to an ion beam, atomic interactions occur that give off EM radiation of wavelengths in the x-ray part of the electromagnetic spectrum specific to an element. PIXE is a powerful yet non-destructive elemental analysis technique now used routinely by geologists, archaeologists, art conservators and others to help answer questions of provenance, dating and authenticity.

<span class="mw-page-title-main">Artifact (archaeology)</span> Something made by humans and of archaeological interest

An artifact or artefact is a general term for an item made or given shape by humans, such as a tool or a work of art, especially an object of archaeological interest. In archaeology, the word has become a term of particular nuance and is defined as an object recovered by archaeological endeavor, which may be a cultural artifact having cultural interest.

Gold fingerprinting is a method of identifying an item made of gold based on the impurities or trace elements it contains.

<span class="mw-page-title-main">British School at Athens</span> Research center in Greece

The British School at Athens (BSA) is an archaeological research institute, one of the eight British International Research Institutes supported by the British Academy. Under UK law it is a registered educational charity, which translates to a non-profit organisation in American and Greek law. It also is one of the 19 Foreign Archaeological Institutes defined by Hellenic Law No. 3028/2002, "On the Protection of Antiquities and Cultural Heritage in General," passed by the Greek Parliament in 2002. Under that law the 17 accredited foreign institutes may perform systematic excavation in Greece with the permission of the government.

Petrography is a branch of petrology that focuses on detailed descriptions of rocks. Someone who studies petrography is called a petrographer. The mineral content and the textural relationships within the rock are described in detail. The classification of rocks is based on the information acquired during the petrographic analysis. Petrographic descriptions start with the field notes at the outcrop and include macroscopic description of hand specimens. The most important petrographer's tool is the petrographic microscope. The detailed analysis of minerals by optical mineralogy in thin section and the micro-texture and structure are critical to understanding the origin of the rock.

Archaeological science, also known as archaeometry, consists of the application of scientific techniques to the analysis of archaeological materials and sites. It is related to methodologies of archaeology. Martinón-Torres and Killick distinguish ‘scientific archaeology’ from ‘archaeological science’. Martinón-Torres and Killick claim that ‘archaeological science’ has promoted the development of high-level theory in archaeology. However, Smith rejects both concepts of archaeological science because neither emphasize falsification or a search for causality.

<span class="mw-page-title-main">Thin section</span> Thin slice of a material prepared for microscopic examination

In optical mineralogy and petrography, a thin section is a thin slice of a rock or mineral sample, prepared in a laboratory, for use with a polarizing petrographic microscope, electron microscope and electron microprobe. A thin sliver of rock is cut from the sample with a diamond saw and ground optically flat. It is then mounted on a glass slide and then ground smooth using progressively finer abrasive grit until the sample is only 30 μm thick. The method uses the Michel-Lévy interference colour chart to determine thickness, typically using quartz as the thickness gauge because it is one of the most abundant minerals.

<span class="mw-page-title-main">Petrographic microscope</span>

A petrographic microscope is a type of optical microscope used to identify rocks and minerals in thin sections. The microscope is used in optical mineralogy and petrography, a branch of petrology which focuses on detailed descriptions of rocks. The method includes aspects of polarized light microscopy (PLM).

<span class="mw-page-title-main">Fritware</span>

Fritware, also known as stone-paste, is a type of pottery in which frit is added to clay to reduce its fusion temperature. The mixture may include quartz or other siliceous material. An organic compound such as gum or glue may be added for binding. The resulting mixture can be fired at a lower temperature than clay alone. A glaze is then applied on the surface.

Igneous petrology is the study of igneous rocks—those that are formed from magma. As a branch of geology, igneous petrology is closely related to volcanology, tectonophysics, and petrology in general. The modern study of igneous rocks utilizes a number of techniques, some of them developed in the fields of chemistry, physics, or other earth sciences. Petrography, crystallography, and isotopic studies are common methods used in igneous petrology.

<span class="mw-page-title-main">Forensic materials engineering</span>

Forensic materials engineering, a branch of forensic engineering, focuses on the material evidence from crime or accident scenes, seeking defects in those materials which might explain why an accident occurred, or the source of a specific material to identify a criminal. Many analytical methods used for material identification may be used in investigations, the exact set being determined by the nature of the material in question, be it metal, glass, ceramic, polymer or composite. An important aspect is the analysis of trace evidence such as skid marks on exposed surfaces, where contact between dissimilar materials leaves material traces of one left on the other. Provided the traces can be analysed successfully, then an accident or crime can often be reconstructed. Another aim will be to determine the cause of a broken component using the technique of fractography.

QEMSCAN is the name for an integrated automated mineralogy and petrography system providing quantitative analysis of minerals, rocks and man-made materials. QEMSCAN is an abbreviation standing for quantitative evaluation of minerals by scanning electron microscopy, and a registered trademark owned by FEI Company since 2009. Prior to 2009, QEMSCAN was sold by LEO, a company jointly owned by Leica and ZEISS. The integrated system comprises a scanning electron microscope (SEM) with a large specimen chamber, up to four light-element energy-dispersive X-ray spectroscopy (EDS) detectors, and proprietary software controlling automated data acquisition. The offline software package iDiscover provides data processing and reporting functionality.

Archaeometallurgical slag is slag discovered and studied in the context of archaeology. Slag, the byproduct of iron-working processes such as smelting or smithing, is left at the iron-working site rather than being moved away with the product. As it weathers well, it is readily available for study. The size, shape, chemical composition and microstructure of slag are determined by features of the iron-working processes used at the time of its formation.

<span class="mw-page-title-main">Rehydroxylation dating</span>

Rehydroxylation [RHX] dating is a developing method for dating fired-clay ceramics. This new concept relies on a key property of ceramic materials, in which they expand and gain mass over time. After a ceramic specimen is removed from the kiln at the time of production, it immediately begins to recombine chemically with moisture from the environment. This reaction reincorporates hydroxyl (OH) groups into the ceramic material, and is described as rehydroxylation (RHX). The phenomenon has been well-documented over the past one hundred years, and has now been proposed as a means to date fired-clay ceramics. The RHX process produces an increase in specimen weight and this weight increase provides an accurate measure of the extent of rehydroxylation. The dating clock is provided by the experimental finding that the RHX reaction follows a precise kinetic law: the weight gain increases as the fourth root of the time which has elapsed since firing. This power law and the RHX method which follows from it were discovered by scientists from the University of Manchester and the University of Edinburgh.

<span class="mw-page-title-main">Nahal Hemar Cave</span> Archeological cave site in Israel

Nahal Hemar Cave is an archeological cave site in Israel, on a cliff in the Judean Desert near the Dead Sea and just northwest of Mount Sodom.

<span class="mw-page-title-main">Cypriot Bichrome ware</span>

Cypriot Bichrome ware is a type of Late Bronze Age, and Iron Age, pottery that is found widely on Cyprus and in the Eastern Mediterranean. This type of pottery is found in many sites on Cyprus, in the Levant, and also in Egypt. It was typically produced on a pottery wheel. A large variety of decorations and motifs are attested. This pottery is very similar to certain types of the Mycenaean pottery from various locations.

The conservation and restoration of ancient Greek pottery is a sub-section of the broader topic of conservation and restoration of ceramic objects. Ancient Greek pottery is one of the most commonly found types of artifacts from the ancient Greek world. The information learned from vase paintings forms the foundation of modern knowledge of ancient Greek art and culture. Most ancient Greek pottery is terracotta, a type of earthenware ceramic, dating from the 11th century BCE through the 1st century CE. The objects are usually excavated from archaeological sites in broken pieces, or shards, and then reassembled. Some have been discovered intact in tombs. Professional conservator-restorers, often in collaboration with curators and conservation scientists, undertake the conservation-restoration of ancient Greek pottery.

James B. Stoltman was an American archaeologist who specialized in the American Midwest.

<span class="mw-page-title-main">SEM-XRF</span> X-ray sources for SEM

SEM-XRF is an established technical term for adding a X-ray generator to a Scanning Electron Microscope (SEM). Technological progress in the fields of small-spot low-power X-ray tubes and of polycapillary X-ray optics has enabled the development of compact micro-focus X-ray sources that can be attached to a SEM equipped for energy-dispersive X-ray spectroscopy.

In archaeology, organic residue analysis (ORA) is the investigation of micro-remains either trapped in or adhered to artefacts from the past. These organic residues can be composed of lipids, proteins, starches and sugars.

References

  1. ↑ Quinn, P. S. 2013. Ceramic Petrography: The Interpretation of Archaeological Pottery & Related Artefacts in Thin Section. Archaeopress, Oxford.
  2. ↑ https://www.jfe-tec.co.jp/en/analysis/la-icp-ms.html
  3. ↑ Marieke Vannoorenberghe, Dimitri Teetaert, Eric Goemaere, Thibaut Van Acker, Joke Belza, Erwin Meylemans, Frank Vanhaecke, Philippe Crombé, Complementarity of LA-ICP-MS and petrography in the analysis of Neolithic pottery from the Scheldt River valley, Belgium, Journal of Archaeological Science: Reports, Volume 42, 2022
  4. ↑ Ask A Scientist Staff, What is XRF (X-ray Fluorescence) and How Does it Work?, ThermoFisher Scientific, https://www.thermofisher.com/blog/ask-a-scientist/what-is-xrf-x-ray-fluorescence-and-how-does-it-work/, 01.28.2020
  5. ↑ Mamoru Kosakai, Yukio Haibara, JOINING SILICON NITRIDE CERAMICS USING CaO-SiO2 GLASS SOLDER, Editor(s): N. Mizutani, K. Akashi, T. Kimura, S. Ohno, M. Yoshimura, T. Maruyama, Y. Saito, K. Przybylski, J. Stringer, H. Kawamura, J.-K. Guo, R.O. Ritchie, O. Fukunaga, O. Kamigaito, K. Kijima, J.B. MacChesney, Z.A. Munir, M.I. Boulos, Y. Miyamoto, Z. Nakagawa, M. Mitomo, K. Komeya, R. Metselaar, T.Y. Tien, Advanced Materials '93, Elsevier, Pages 589-592, 1994
  6. ↑ Ask A Scientist Staff, Ceramic materials characterization: Imaging and elemental analysis with scanning electron microscopy, ThermoFisher Scientific, https://assets.thermofisher.com/TFS-Assets/MSD/Application-Notes/desktop-sem-ceramics-an0130.pdf
  7. ↑ Freestone, I. 1995. Ceramic Petrography. American Journal of Archaeology 99: 111–115.
  8. ↑ Arnold, D. E. 1988. Ceramic Theory and Cultural Process. Cambridge University Press.
  9. ↑ Whitbread, I. K. 2001. Ceramic Petrology, Clay Geochemistry and Ceramic Production – from Technology to the Mind of the Potter. In: (Brothwell, D. R. and Pollard, A. M.) Handbook of Archaeological Sciences, Wiley: 449–458.
  10. ↑ Shepard, A. O. 1936. The Technology of Pecos Pottery, In: Kidder, A. and Shepard, A. O (eds.). The Glaze-Paint, Culinary and Other Wares. The Pottery of Pecos Volume II.Yale University Press, New Haven: 389–588.
  11. ↑ Peacock, D. P. S. 1969. Neolithic Pottery Production in Cornwall. Antiquity, 43: 145-149.
  12. ↑ Morris, E. and Woodward, A. 2003. Ceramic Petrology and Prehistoric Pottery in the UK. Proceedings of the Prehistoric Society 69: 279–303.
  13. ↑ Vince, A. 2001. Ceramic petrology and post-medieval pottery. Post-Medieval Archaeology, 35: 106–118.
  14. ↑ Vince, A. 2005. Ceramic Petrology and the Study of Anglo-Saxon and Later Medieval Ceramics. Medieval Archaeology, 49: 219-245.
  15. ↑ Whitbread, I. K. 1995 Greek Transport Amphorae: A Petrological and Archaeological Study. Fitch Laboratory Occasional Paper, 4. British School at Athens.
  16. ↑ Day, P. M. and Wilson, D. E. 1998. Consuming Power: Kamares Ware in Protopalatial Knossos. Antiquity, 72: 350–358.
  17. ↑ Vaughan, S. J. 1995. Ceramic petrology and Petrology in the Aegean. American Journal of Archaeology 99: 115–117.
  18. ↑ Miksa, E. J. and Heidke, J. M. 2001. It all comes out in the wash: Actualistic petrofacies modeling of temper provenance, Tonto Basin, Arizona, USA. Geoarchaeology 16:177-222.
  19. ↑ Reedy, C. L. 2008. Thin-Section Petrography of Stone & Ceramic Materials. Archetype, London.
  20. ↑ Quinn, P. S. 2008. The occurrence and research potential of microfossils in inorganic archaeological materials. Geoarchaeology, 23: 275–291.
  21. ↑ Baxter, M. J., Beardah, C. C., Papageorgiou, I,. Cau, M. A., Day, P. M. and Kilikoglou, V. 2008. On statistical approaches to the study of ceramic artefacts using geochemical and mineralogical data. Archaeometry 50: 142–157.
  22. ↑ Gomart, Louise, Ilett, M., From potters’ hands to settlement dynamics in the Early Neolithic site of Cuiry-lès-Chaudardes (Picardy, France), Archeologicke Rozhledy, 2017/06/01
  23. ↑ Henderson, Jon, Gallou, Chrysanthi, Flemming, Nicholas, Spondylis, Elias, The Pavlopetri Underwater Archaeology Project: investigating an ancient submerged town, 2012/01/01
  24. ↑ Wang Enyuan, Xiong Yinfei, Zhu Yibing, Wu Jingwei, Provenance study of ceramic sherds excavated from Qinglong Town site during Tang and Song Dynasties by composition and petrography analysis, Journal of Archaeological Science: Reports, Volume 38, 2021
  25. ↑ Reedy, C. L. 1994. Thin-Section Petrography in Studies of Cultural Materials. Journal of the American Institute for Conservation, Vol. 33: 115-129.
  26. ↑ Goren, Y., Finkelstein, I. & Na'aman, N., Inscribed in Clay - Provenance Study of the Amarna Tablets and Other Ancient Near Eastern Texts, Tel Aviv: Sonia and Marco Nadler Institute of Archaeology, Tel Aviv University, 2004.
  27. ↑ Goren,Y., Mommsen, H. & Klinger, J. 2011. Non-Destructive Provenance Study of Cuneiform Tablets using Portable X-Ray Fluorescence (pXRF). Journal of Archaeological Science, 38: 684-696.
  28. ↑ Goren,Y., Mommsen, H., Finkelstein, I. & Na'aman, N. 2009. Provenance study of the Gilgamesh fragment from Megiddo. Archaeometry 51: 763-773.
  29. ↑ Freestone, I., Johns, C. and Potter, T. (Ed.) 1982. Current Research in Ceramics: Thin-Section Studies. British Museum Occasional Paper, 32.
  30. ↑ Middleton, A. and Freestone, I. (Eds.) 1991. Recent Developments in Ceramic Petrology. British Museum,Occasional Paper 81, London.
  31. ↑ Quinn, P. S. (Ed.) 2009. Interpreting Silent Artefacts: Petrographic Approaches to Archaeological Materials. Archaeopress, Oxford.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.