China Railways MT1

Last updated
China Railways MT1
Mantetsu Matei class (マテイ)
Mantetsu-matei1800 (matei1).png
Builder's photo of マテイ1800.
Type and origin
Power typeSteam
Builder Kawasaki;  Hitachi
Build date1936
Total produced7
Specifications
Configuration:
   Whyte 4-8-2
Gauge 1,435 mm (4 ft 8 12 in) standard gauge
Driver dia.1,750 mm (68.9 in)
Length25,981 mm (85 ft 2 78 in)
Width3,123 mm (10 ft 3 in)
Height4,740 mm (15 ft 6 58 in)
Adhesive weight 83.39 t
(82.07 long tons; 91.92 short tons)
Loco weight126.28 t
(124.29 long tons; 139.20 short tons)
Tender weight85.00 t
(83.66 long tons; 93.70 short tons)
Total weight211.28 t
(207.94 long tons; 232.90 short tons)
Fuel typeCoal
Fuel capacity15.00 t (14.76 long tons; 16.53 short tons)
Water cap35.00 m3 (1,236 cu ft)
Firebox:
  Firegrate area
5.36 m2 (57.7 sq ft)
Boiler:
  Small tubes93 x 51 mm (2.0 in)
  Large tubes108 x 90 mm (3.5 in)
Boiler pressure14.5 kgf/cm2 (206 psi)
Heating surface395.66 m2 (4,258.8 sq ft)
  Tubes266.77 m2 (2,871.5 sq ft)
  Firebox28.71 m2 (309.0 sq ft)
Superheater:
  Type Schmidt type E
  Heating area100.18 m2 (1,078.3 sq ft)
Cylinder size 630 mm × 760 mm
(24.80 in × 29.92 in)
Performance figures
Maximum speed90 km/h (56 mph)
Tractive effort 208.37 kN (46,840 lbf)
Career
Operators South Manchuria Railway
China Railway
Class SMR: マテイ
CR: ㄇㄎ一 (1951–1959)
CR: MT1 (1959–end)
Number in class17
NumbersSMR: 1800–1806 (1936–1938)
SMR: マテイ1–7 (1938–1945)
CR: 1–7

The China Railways MT1 class steam locomotive was a class of 4-8-2 steam locomotives for goods trains operated by the China Railway. They were originally built for the South Manchuria Railway (Mantetsu) in Japan in 1936. [1] The "Mate" name came from the American naming system for steam locomotives, under which locomotives with 4-8-2 wheel arrangement were called "Mountain".

Contents

History

matei1805 at Dalian sometime between 1936 and 1938. Mantetsu-matei1805 (matei6).png
マテイ1805 at Dalian sometime between 1936 and 1938.

As the development of Manchukuo continued and the population of cities like Xinjing and Harbin grew, it became necessary to transport increasing quantities of fresh foods to the north. To fill this need, express fish trains were planned, for which a goods locomotive capable of high speed operation was required. The result of this requirement was the Matei class superheated tender locomotive built in 1936. They were the largest Mantetsu locomotives in terms of length and weight, and were equipped with a Schmidt type E superheater, a feedwater heater, and an automatic stoker. Originally planned with a 4-6-2 wheel arrangement and intended for high-speed transport of perishable foods to the north, but the need to pull regular goods trains southbound led to the use of a 4-8-2 arrangement for traction and larger wheel diameter for increased speed. [1] A total of seven were built by Kawasaki and Hitachi in 1936. They were used mainly on express goods trains between Dalian and Xinjing, and could pull 1,700 t (1,700 long tons; 1,900 short tons) of freight at 90 km/h (56 mph), and they were also occasionally used on southbound passenger trains. [1]

OwnerClass & numbers
(1936–1938)
Class & numbers
(1938–1945)
BuilderYear
Mantetsuマテイ1800–マテイ1806マテイ1–マテイ7 Kawasaki, Hitachi 1936

Postwar

At the end of the Pacific War, all seven were assigned to the Sujiatun locomotive depot of the Fengtian Railway Bureau, and all were taken over by the Republic of China Railway. Following the establishment of the People's Republic and the subsequent creation of the current China Railway, they became class ㄇㄉ一 (MT1) in 1951, becoming class MT1 (written in Pinyin instead of Zhuyin) in 1959, and numbered 1–7. Numbers 5 and 6 were in service at the Hegang mine in 1985. [2]

Related Research Articles

South Manchuria Railway 1906–1945 Japanese company in China

The South Manchuria Railway, officially The South Manchuria Railway Company, Ltd., or 滿鐵 for short, was a large National Policy Company of the Empire of Japan whose primary function was the operation of railways on the Dalian–Fengtian (Mukden)–Changchun corridor in northeastern China, as well as on several branch lines.

Asia Express

The Asia Express was an express passenger train operated by the South Manchuria Railway (Mantetsu) from 1934 until 1943. This limited express, which began operation in November 1934 and was Mantetsu's most iconic train, operated in Manchukuo between Dalian and Xinjing, and was extended to Harbin in 1935.

China Railways SL7

The China Railways SL7 class steam locomotive was a class of 4-6-2 express passenger steam locomotives operated by the China Railway. They were originally built for the South Manchuria Railway (Mantetsu) to pull the Asia Express - Mantetsu's signature train and most iconic locomotive, whose images were used on fliers, posters, postage stamps, and even children's school textbooks, as a symbol of technology and modernism in Manchukuo and was used to demonstrate the success of Japan's imperial project.

China Railways SL6 4-6-2 steam locomotive

The China Railways SL6 class steam locomotive was a class of 4-6-2 superheated two-cylinder passenger steam locomotives operated by the China Railway. Originally built for the South Manchuria Railway (Mantetsu), the Manchukuo National Railway, the Central China Railway and the North China Transportation Company by several Japanese manufacturers between 1934 and 1940, they were the most numerous class of steam passenger locomotive in China, with 422 eventually built.

China Railways SL11

The China Railways SL11 class steam locomotive was a class of 4-6-2 passenger steam locomotives operated by the China Railway. They were originally built for the South Manchuria Railway and the Manchukuo National Railway by ALCO of the United States in 1908, and have the distinction of being part of the first group of standard gauge locomotives to operate in northeastern China.

The China Railways SL2 class steam locomotive was a class of 4-6-2 passenger steam locomotives operated by the China Railway. They were originally built for the South Manchuria Railway (Mantetsu), where they were designated Pashini (パシニ) class.

China Railways SL3 4-6-2 steam locomotive

The China Railways SL3 class steam locomotive was a class of 4-6-2 passenger steam locomotives operated by the China Railway. They were originally built for the South Manchuria Railway, the Manchukuo National Railway and the North China Transportation Company by several Japanese manufacturers between 1934 and 1940. They were designed in 1933 based on the design of the first Pashisa class locomotives ; the first order was placed by Mantetsu in March of that year.

China Railways SL5

The China Railways SL5 steam locomotive was a class of 4-6-2 passenger steam locomotives operated by the China Railway. They were originally built for the South Manchuria Railway in 1927 and 1928.

China Railways SL8

The China Railways SL8 class steam locomotive was a class of 4-6-2 express passenger steam locomotives operated by the China Railway. They were originally built for the South Manchuria Railway (Mantetsu) and the Manchukuo National Railway between 1937 and 1940.

China Railways AM1

The China Railways AM1 class locomotives were a class of 4-4-0 passenger steam locomotives operated by the China Railway, originally built for the South Manchuria Railway (Mantetsu). The "Ame" name came from the American naming system for steam locomotives, under which locomotives with 4-4-0 wheel arrangement were called "American".

The China Railways TH10 class steam locomotive was a class of 4-6-0 passenger steam locomotives operated by the China Railway. Originally amongst the first locomotives ordered by the South Manchuria Railway (Mantetsu), they were later operated by the privately owned Jichang Jidun Railway and its successor, the Manchukuo National Railway, which designated them Tehoni class. The "Teho" name came from the American naming system for steam locomotives, under which locomotives with 4-6-0 wheel arrangement were called "Ten-Wheeler".

China Railways TH1


The China Railways TH1 class steam locomotive was a class of 4-6-0 passenger steam locomotives operated by the China Railway. Originally built for the South Manchuria Railway (Mantetsu), some were also operated by the Manchukuo National Railway. The "Teho" name came from the American naming system for steam locomotives, under which locomotives with 4-6-0 wheel arrangement were called "Ten-Wheeler".

The Manchukuo National Railway Tehosa class steam locomotives were a class of 4-6-0 passenger steam locomotives operated by the Manchukuo National Railway. Originally built for the South Manchuria Railway (Mantetsu), they later transferred to the MNR. The "Teho" name came from the American naming system for steam locomotives, under which locomotives with 4-6-0 wheel arrangement were called "Ten-Wheeler".

China Railways LD1

The China Railways LD1 class steam locomotive was a class of streamlined 4-4-4T tank steam locomotives for passenger trains operated by the China Railway. They were originally built for the South Manchuria Railway (Mantetsu) in 1936. The "Dabu" name came from the English "double-ender", which was used by Mantetsu for all tank locomotives.

China Railways JF2

The China Railways JF2 class steam locomotive was a class of 2-8-2 steam locomotives for goods trains operated by the China Railway. They were originally built for the South Manchuria Railway (Mantetsu) by several American and Japanese manufacturers, as well as by Mantetsu's Shahekou Works, between 1924 and 1932.

China Railways JF4

The China Railways KD23 class locomotive was a class of 2-8-0 steam locomotives operated by the China Railway. Originally amongst the first locomotives ordered by the South Manchuria Railway (Mantetsu), they were built by ALCo of the United States in 1906, and they were later operated by the privately owned Jichang Jidun Railway and its successor, the Manchukuo National Railway. The "Sori" name comes from the American naming system for steam locomotives, in which the 2-8-0 wheel arrangement is called "Consolidation".

China Railways KD1

The China Railways KD1 class locomotives were a class of 2-8-0 steam locomotives operated by China Railway, originally built for the South Manchuria Railway (Mantetsu) and the Manchukuo National Railway by ALCo of the United States in 1907 and 1908. The "Sori" name comes from the American naming system for steam locomotives, in which the 2-8-0 wheel arrangement is called "Consolidation".

China Railways JF1 2-8-2 steam locomotive

The China Railways JF1 class steam locomotive was a class of 2-8-2 steam locomotives for freight trains operated by the China Railway. They were originally built in the United States, Japan and Manchukuo between 1918 and 1945 for the South Manchuria Railway (Mantetsu), the Manchukuo National Railway, the North China Transportation Company, and the Central China Railway. After the end of the Pacific War, they were taken over by the China Railway, the Korean State Railway in North Korea and by the Korean National Railroad in South Korea, and more were built in China after 1949 for the China Railway, which ultimately operated over 2,000 of the type.

Sentetsu Purena-class locomotives 2-6-2 steam locomotive

The Purena-class (プレナ) locomotives were a group of steam tank locomotives with 2-6-2 wheel arrangement of used by the Chosen Government Railway (Sentetsu) in Korea. The "Pure" name came from the American naming system for steam locomotives, under which locomotives with 2-6-2 wheel arrangement were called "Prairie".

References

  1. 1 2 3 Ichihara, Yoshizumi, 写真集南満洲鉄道 (South Manchuria Railway Photo Collection) pp. 125, 135, 1998 Seibundo Shinkosha Publishing Co. Ltd. (in Japanese)
  2. http://www.railography.co.uk/info/cn_steam/lists/locos/mt1_0001.htm