Computable general equilibrium

Last updated

Computable general equilibrium (CGE) models are a class of economic models that use actual economic data to estimate how an economy might react to changes in policy, technology or other external factors. CGE models are also referred to as AGE (applied general equilibrium) models. A CGE model consists of equations describing model variables and a database (usually very detailed) consistent with these model equations. The equations tend to be neoclassical in spirit, often assuming cost-minimizing behaviour by producers, average-cost pricing, and household demands based on optimizing behaviour.

Contents

CGE models are useful whenever we wish to estimate the effect of changes in one part of the economy upon the rest. They have been used widely to analyse trade policy. More recently, CGE has been a popular way to estimate the economic effects of measures to reduce greenhouse gas emissions.

Main features

A CGE model consists of equations describing model variables and a database (usually very detailed) consistent with these model equations. The equations tend to be neoclassical in spirit, often assuming cost-minimizing behaviour by producers, average-cost pricing, and household demands based on optimizing behaviour. However, most CGE models conform only loosely to the theoretical general equilibrium paradigm. For example, they may allow for:

  1. non-market clearing, especially for labour (unemployment) or for commodities (inventories)
  2. imperfect competition (e.g., monopoly pricing)
  3. demands not influenced by price (e.g., government demands)

CGE models always contain more variables than equations—so some variables must be set outside the model. These variables are termed exogenous; the remainder, determined by the model, is called endogenous. The choice of which variables are to be exogenous is called the model closure, and may give rise to controversy. For example, some modelers hold employment and the trade balance fixed; others allow these to vary. Variables defining technology, consumer tastes, and government instruments (such as tax rates) are usually exogenous.

A CGE model database consists of:

  1. tables of transaction values, showing, for example, the value of coal used by the iron industry. Usually the database is presented as an input-output table or as a social accounting matrix (SAM). In either case, it covers the whole economy of a country (or even the whole world), and distinguishes a number of sectors, commodities, primary factors and perhaps types of households. Sectoral coverage ranges from relatively simple representations of capital, labor and intermediates to highly detailed representations of specific sub-sectors (e.g., the electricity sector in GTAP-Power. [1] )
  2. elasticities: dimensionless parameters that capture behavioural response. For example, export demand elasticities specify by how much export volumes might fall if export prices went up. Other elasticities may belong to the constant elasticity of substitution class. Amongst these are Armington elasticities, which show whether products of different countries are close substitutes, and elasticities measuring how easily inputs to production may be substituted for one another. Income elasticity of demand shows how household demands respond to income changes.

History

CGE models are descended from the input–output models pioneered by Wassily Leontief, but assign a more important role to prices. Thus, where Leontief assumed that, say, a fixed amount of labour was required to produce a ton of iron, a CGE model would normally allow wage levels to (negatively) affect labour demands.

CGE models derive too from the models for planning the economies of poorer countries constructed (usually by a foreign expert) from 1960 onwards. [2] [3] Compared to the Leontief model, development planning models focused more on constraints or shortages—of skilled labour, capital, or foreign exchange.

CGE modelling of richer economies descends from Leif Johansen's 1960 [4] MSG model of Norway, and the static model developed by the Cambridge Growth Project [5] in the UK. Both models were pragmatic in flavour, and traced variables through time. The Australian MONASH model [6] is a modern representative of this class. Perhaps the first CGE model similar to those of today was that of Taylor and Black (1974). [7]

Areas of use

CGE models are useful whenever we wish to estimate the effect of changes in one part of the economy upon the rest. For example, a tax on flour might affect bread prices, the CPI, and hence perhaps wages and employment. They have been used widely to analyse trade policy. More recently, CGE has been a popular way to estimate the economic effects of measures to reduce greenhouse gas emissions.

Trade policy

CGE models have been used widely to analyse trade policy. Today there are many CGE models of different countries. One of the most well-known CGE models is global: the GTAP [8] model of world trade.

Developing economies

CGE models are useful to model the economies of countries for which time series data are scarce or not relevant (perhaps because of disturbances such as regime changes). Here, strong, reasonable, assumptions embedded in the model must replace historical evidence. Thus developing economies are often analysed using CGE models, such as those based on the IFPRI template model. [9]

Climate policy

CGE models can specify consumer and producer behaviour and ‘simulate’ effects of climate policy on various economic outcomes. They can show economic gains and losses across different groups (e.g., households that differ in income, or in different regions). The equations include assumptions about the behavioural response of different groups. By optimising the prices paid for various outputs the direct burdens are shifted from one taxpayer to another. [10]

Comparative-static and dynamic CGE models

Many CGE models are comparative static: they model the reactions of the economy at only one point in time. For policy analysis, results from such a model are often interpreted as showing the reaction of the economy in some future period to one or a few external shocks or policy changes. That is, the results show the difference (usually reported in percent change form) between two alternative future states (with and without the policy shock). The process of adjustment to the new equilibrium, in particular the reallocation of labor and capital across sectors, usually is not explicitly represented in such a model.

In contrast, long-run models focus on adjustments to the underlying resource base when modeling policy changes. This can include dynamic adjustment to the labor supply, adjustments in installed and overall capital stocks, and even adjustment to overall productivity and market structure. There are two broad approaches followed in the policy literature to such long-run adjustment. One involves what is called "comparative steady state" analysis. Under such an approach, long-run or steady-state closure rules are used, under either forward-looking or recursive dynamic behavior, to solve for long-run adjustments. [11]

The alternative approach involves explicit modeling of dynamic adjustment paths. These models can seem more realistic, but are more challenging to construct and solve. They require for instance that future changes are predicted for all exogenous variables, not just those affected by a possible policy change. The dynamic elements may arise from partial adjustment processes or from stock/flow accumulation relations: between capital stocks and investment, and between foreign debt and trade deficits. However there is a potential consistency problem because the variables that change from one equilibrium solution to the next are not necessarily consistent with each other during the period of change. The modeling of the path of adjustment may involve forward-looking expectations, [12] where agents' expectations depend on the future state of the economy and it is necessary to solve for all periods simultaneously, leading to full multi-period dynamic CGE models. An alternative is recursive dynamics. Recursive-dynamic CGE models are those that can be solved sequentially (one period at a time). They assume that behaviour depends only on current and past states of the economy. Recursive dynamic models where a single period is solved for, comparative steady-state analysis, is a special case of recursive dynamic modeling over what can be multiple periods.

Techniques

Early CGE models were often solved by a program custom-written for that particular model. Models were expensive to construct and sometimes appeared as a 'black box' to outsiders. Now, most CGE models are formulated and solved using one of the GAMS or GEMPACK software systems. AMPL, [13] Excel and MATLAB are also used. Use of such systems has lowered the cost of entry to CGE modelling; allowed model simulations to be independently replicated; and increased the transparency of the models.

See also

Related Research Articles

<span class="mw-page-title-main">Microeconomics</span> Behavior of individuals and firms

Microeconomics is a branch of economics that studies the behavior of individuals and firms in making decisions regarding the allocation of scarce resources and the interactions among these individuals and firms. Microeconomics focuses on the study of individual markets, sectors, or industries as opposed to the national economy as a whole, which is studied in macroeconomics.

<span class="mw-page-title-main">Macroeconomics</span> Study of an economy as a whole

Macroeconomics is a branch of economics that deals with the performance, structure, behavior, and decision-making of an economy as a whole. This includes regional, national, and global economies. Macroeconomists study topics such as output/GDP and national income, unemployment, price indices and inflation, consumption, saving, investment, energy, international trade, and international finance.

<span class="mw-page-title-main">Supply and demand</span> Economic model of price determination in a market

In microeconomics, supply and demand is an economic model of price determination in a market. It postulates that, holding all else equal, in a competitive market, the unit price for a particular good or other traded item such as labor or liquid financial assets, will vary until it settles at a point where the quantity demanded will equal the quantity supplied, resulting in an economic equilibrium for price and quantity transacted. The concept of supply and demand forms the theoretical basis of modern economics.

In economics, general equilibrium theory attempts to explain the behavior of supply, demand, and prices in a whole economy with several or many interacting markets, by seeking to prove that the interaction of demand and supply will result in an overall general equilibrium. General equilibrium theory contrasts with the theory of partial equilibrium, which analyzes a specific part of an economy while its other factors are held constant. In general equilibrium, constant influences are considered to be noneconomic, or in other words, considered to be beyond the scope of economic analysis. The noneconomic influences may change given changes in the economic factors however, and therefore the prediction accuracy of an equilibrium model may depend on the independence of the economic factors from noneconomic ones.

<span class="mw-page-title-main">IS–LM model</span> Macroeconomic model relating interest rates and asset market

The IS–LM model, or Hicks–Hansen model, is a two-dimensional macroeconomic model which is used as a pedagogical tool in macroeconomic teaching. The IS–LM model shows the relationship between interest rates and output in the short run in a closed economy. The intersection of the "investment–saving" (IS) and "liquidity preference–money supply" (LM) curves illustrates a "general equilibrium" where supposed simultaneous equilibria occur in both the goods and the money markets. The IS–LM model shows the importance of various demand shocks on output and consequently offers an explanation of changes in national income in the short run when prices are fixed or sticky. Hence, the model can be used as a tool to suggest potential levels for appropriate stabilisation policies. It is also used as a building block for the demand side of the economy in more comprehensive models like the AD–AS model.

This aims to be a complete article list of economics topics:

A macroeconomic model is an analytical tool designed to describe the operation of the problems of economy of a country or a region. These models are usually designed to examine the comparative statics and dynamics of aggregate quantities such as the total amount of goods and services produced, total income earned, the level of employment of productive resources, and the level of prices.

A social accounting matrix (SAM) represents flows of all economic transactions that take place within an economy. It is at the core, a matrix representation of the national accounts for a given country, but can be extended to include non-national accounting flows, and created for whole regions or area. SAMs refer to a single year providing a static picture of the economy.

GEMPACK is a modeling system for CGE economic models, used at the Centre of Policy Studies (CoPS) in Melbourne, Australia, and sold to other CGE modellers.

<span class="mw-page-title-main">GTAP</span> Network of researchers

GTAP is a global network of researchers who conduct quantitative analysis of international economic policy issues, including trade policy, climate policy, and globalization linkages to inequality and employment. The consortium produces a consistent global economic database which is widely used in the research community to study prospective international economic policy around these issues.

In mathematical economics, applied general equilibrium (AGE) models were pioneered by Herbert Scarf at Yale University in 1967, in two papers, and a follow-up book with Terje Hansen in 1973, with the aim of empirically estimating the Arrow–Debreu model of general equilibrium theory with empirical data, to provide "“a general method for the explicit numerical solution of the neoclassical model” (Scarf with Hansen 1973: 1)

Dynamic stochastic general equilibrium modeling is a macroeconomic method which is often employed by monetary and fiscal authorities for policy analysis, explaining historical time-series data, as well as future forecasting purposes. DSGE econometric modelling applies general equilibrium theory and microeconomic principles in a tractable manner to postulate economic phenomena, such as economic growth and business cycles, as well as policy effects and market shocks.

The neoclassical synthesis (NCS), neoclassical–Keynesian synthesis, or just neo-Keynesianism was a neoclassical economics academic movement and paradigm in economics that worked towards reconciling the macroeconomic thought of John Maynard Keynes in his book The General Theory of Employment, Interest and Money (1936). It was formulated most notably by John Hicks (1937), Franco Modigliani (1944), and Paul Samuelson (1948), who dominated economics in the post-war period and formed the mainstream of macroeconomic thought in the 1950s, 60s, and 70s.

<span class="mw-page-title-main">AD–AS model</span> Macroeconomic model relating aggregate demand and supply

The AD–AS or aggregate demand–aggregate supply model is a widely used macroeconomic model that explains short-run and long-run economic changes through the relationship of aggregate demand (AD) and aggregate supply (AS) in a diagram. It coexists in an older and static version depicting the two variables output and price level, and in a newer dynamic version showing output and inflation.

Recursive economics is a branch of modern economics based on a paradigm of individuals making a series of two-period optimization decisions over time.

In macroeconomics, recursive competitive equilibrium (RCE) is an equilibrium concept. It has been widely used in exploring a wide variety of economic issues including business-cycle fluctuations, monetary and fiscal policy, trade related phenomena, and regularities in asset price co-movements. This is the equilibrium associated with dynamic programs that represent the decision problem when agents must distinguish between aggregate and individual state variables. These state variables embody the prior and current information of the economy. The decisions and the realizations of exogenous uncertainty determine the values of the state variables in the next sequential time period. Hence, the issue is recursive. A RCE is characterized by time invariant functions of a limited number of 'state variables', which summarize the effects of past decisions and current information. These functions include (a) a pricing function, (b) a value function, (c) a period allocation policy specifying the individual's decision, (d) period allocation policy specifying the decision of each firm and (e) a function specifying the law of motion of the capital stock. Since decisions are made with all relevant information available, it is a rational expectations equilibrium.

Prospective Outlook on Long-term Energy Systems (POLES) is a world simulation model for the energy sector that runs on the Vensim software. It is a techno-economic model with endogenous projection of energy prices, a complete accounting of energy demand and supply of numerous energy vectors and associated technologies, and a carbon dioxide and other greenhouse gases emissions module.

Stock-flow consistent models (SFC) are a family of macroeconomic models based on a rigorous accounting framework, that seeks to guarantee a correct and comprehensive integration of all the flows and the stocks of an economy. These models were first developed in the mid-20th century but have recently become popular, particularly within the post-Keynesian school of thought. Stock-flow consistent models are in contrast to dynamic stochastic general equilibrium models, which are used in mainstream economics.

This glossary of economics is a list of definitions of terms and concepts used in economics, its sub-disciplines, and related fields.

Peter Bishop Dixon AO FASSA is an Australian economist known for his work in general equilibrium theory and computable general equilibrium models. He has published several books and more than two hundred academic papers on economic modelling and economic policy analysis.

References

  1. ↑ "GTAP Data Bases: GTAP 10 Satellite Data and Utilities", Global Trade Analysis Project (GTAP)
  2. ↑ Manne, Alex S. (1963). "Key Sectors of the Mexican Economy, 1960–1970". In Alan S. Manne; Harry M. Markowitz (eds.). Studies in Process Analysis: Economy-Wide Production Capabilities (Cowles Foundation Monograph no. 18). John Wiley & Sons.
  3. ↑ Sandee, J. (1960), A Demonstration Planning Model for India, Asia Publishing House, Calcutta.
  4. ↑ Johansen, Leif (1960). A Multi-Sectoral Study of Economic Growth, North-Holland (2nd enlarged edition 1974).
  5. ↑ Cambridge Growth Project Archived 2009-02-28 at the Wayback Machine
  6. ↑ Dixon, Peter; Rimmer, Maureen (2002). Dynamic General Equilibrium Modelling for Forecasting and Policy: a Practical Guide and Documentation of MONASH. Amsterdam: Elsevier. ISBN   978-0-444-51260-4.
  7. ↑ Taylor, L. and S. L. Black (1974), "Practical General Equilibrium Estimation of Resources Pulls under Trade Liberalization", Journal of International Economics , vol. 4(1), April, pp. 37–58.
  8. ↑ Hertel, Tom (ed.) (1997). Global Trade Analysis: Modeling and Applications, Cambridge University Press.
  9. ↑ Löfgren, Hans; Rebecca Lee Harris and Sherman Robinson (2002). A Standard Computable General Equilibrium (CGE) in GAMS, Microcomputers in Policy Research, vol. 5, International Food Policy Research Institute.
  10. ↑ Kolstad C., K. Urama, J. Broome, A. Bruvoll, M. Cariño Olvera, D. Fullerton, C. Gollier, W. M. Hanemann, R. Hassan, F. Jotzo, M. R. Khan, L. Meyer, and L. Mundaca, 2014: "Social, Economic and Ethical Concepts and Methods", p. 238. In: AR5 Climate Change 2014: Mitigation of Climate Change. Contribution of Working Group III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. Edenhofer, O., R. Pichs-Madruga, Y. Sokona, E. Farahani, S. Kadner, K. Seyboth, A. Adler, I. Baum, S. Brunner, P. Eickemeier, B. Kriemann, J. Savolainen, S. Schlömer, C. von Stechow, T. Zwickel and J. C. Minx (eds.). Cambridge University Press, Cambridge, United Kingdom and New York
  11. ↑ Francois, Joseph; et al. (1999). R. Baldwin; J. Francois (eds.). "Trade liberalization and investment in a multilateral framework". Dynamic Issues in Applied Commercial Policy Analysis. Cambridge: Cambridge University Press: 202–222. doi:10.1017/CBO9780511599101.008. ISBN   9780521641715 . Retrieved 9 March 2019.
  12. ↑ Keuschnigg, Christian [in German]; Kohler, Wilhelm [in German] (1997). J. Francois; K. Reinert (eds.). "Dynamics of Trade Liberalization". Applied Methods for Trade Policy Analysis. Cambridge: Cambridge University Press: 383–434. doi:10.1017/CBO9781139174824.015. ISBN   9780521589970 . Retrieved 9 March 2019.
  13. ↑ Joshua Elliott. "The Simplest CGE". Archived from the original on 2016-04-23. Retrieved 2011-05-23.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.