Constructed soil

Last updated

Constructed soils (also called fabricated soils) are mixtures of organic and mineral material derived from a number of sources, including repurposed organic waste, that are designed to approximate natural soils and provide a growing medium for plants. [1] Constructed soils are commonly used in the reclamation of degraded land where natural topsoil is either not present or has been contaminated. Examples of these sites include mines, landfills, and other industrial or urban areas. [2] Constructed soils are classified as Technosols, and often form the upper layer, or layers, in a Technosol above a geomembrane or other barrier capping waste material. [3]

Contents

Use of constructed soils in restoring sites is preferable to importing topsoil from other locations. Topsoil harvesting means a second location will be degraded, and collection and transport expenses will generally be higher than using local materials to create a new soil. Soil that was removed and stockpiled (e.g. during the operation of a mine), can become part of a constructed soil once a site is being reclaimed. [4]

The goal in designing a constructed soil is to replicate the physical, chemical, and biological functions of natural soils. The target soil properties depend on the site location and final land use. Constructed soils are intended to be as low-maintenance as possible, [2] meaning they will be a stable and functional system over time that does not need additional inputs once biogeochemical cycling is established.

Where applicable, constructed soils must meet regulatory requirements dictating the acceptable thresholds of certain soil characteristics. Pathogens, harmful trace elements, salinity, and pH must be at values that are not harmful to human or environmental health. [5] Specific values for the balance of soil nutrients, including proportion of organic matter, carbon to nitrogen ratio, and total nitrogen, may also be required to ensure prolonged soil functioning. [6]

Constructed soil profiles

Soils naturally develop differentiated horizons, where the soil properties change with depth in a soil profile. Constructed soils that are less than approximately 45 cm thick will tend to be homogenous topsoil mixtures. [2] For thicker applications of constructed soils, natural soil profiles can be emulated and there are advantages to doing so. The most basic reason is that constructed topsoil is expensive to produce. Lower quality and less expensive materials can be used for subsoil and substratum layers. Additional layers can also improve the functioning of the soil. Thicker horizons below the topsoil increase the volume of soil available to plant roots and can be an additional nutrient source. Sublayers are also important to the regulation of water in the soil and can be used to improve or control drainage, which is critical on reclamation sites where leaching of toxic materials below the constructed soil is a concern.

When constructing a complete soil profile, the interfaces between the layers must be considered as well as the composition of each layer. Abrupt differences in soil properties at horizon boundaries (namely texture and bulk density) impacts the hydraulic functioning of a soil, determining the extent of lateral versus vertical flow and the presence of perched water in the soil. [7] Compact layers with little pore space can also impede root growth. In some situations, clay-rich layers that act as aquitards and deflect roots are used intentionally as barriers at the base of constructed soil profiles. [8] In sloped areas, the friction between the layers must be considered to minimize soil erosion and reduce the chance of slope failure. Soils with high water-holding capacity are also at risk of slumping (erosion by mass-wasting) if placed on slopes in wet climates.

Diagram of a generic natural soil profile, with O, A, B and C horizons. Generalized Soil Profile.png
Diagram of a generic natural soil profile, with O, A, B and C horizons.
Comparison of Natural and Constructed Soil Profiles
Natural Soil HorizonsConstructed Soil
O: organic layerOrganic mulch application to protect topsoil and provide habitat and nutrients to soil organisms (excluded in projects with rapid revegetation
A: surface or topsoilManufactured topsoil that serves as the primary rooting medium; high fertility; carefully designed to meet specific requirements
B: subsoil or mineral soilBulk material to add rooting volume and increase nutrient and water storage capacity; requirements are less strict
C: substratum (parent materialDrainage layer with high porosity and high density (sand or gravel); no organic matter; thickness determined by drainage requirements

Components of constructed soils

Constructed soils generally consist of three components: a mineral fraction, organic fraction, and carbon source. [2] [9] Each contributes different features to the soil. Selection of the individual materials making up each component depends on the specific objectives and parameters of a constructed soil project. The ratios of these components are determined by the target outcomes as well as considerations like cost and availability of materials, and how the components act when mixed. Not all options will combine well into a uniform soil mixture.

Mineral fraction

The mineral fraction forms the matrix of the soil, determining the final texture (relative percentages of sand, silt, and clay). The texture and proportion of mineral material determines the soil aeration and drainage and influences the soil structure. Beyond the size, physical properties such as the roundness of sand particles can also influence the packing of grains, changing the pore size distribution. Texture and angularity of grains also impacts the shear strength of a soil. [10] The mineralogy of this material determines how quickly the soil will weather when subjected to the environment and which elements will be released, changing the physical and chemical characteristics of the soil over time. [7]

Organic fraction

The organic material fraction consists of decomposed or partially decomposed organic matter. It is necessary to provide essential macronutrients and micronutrients to plants and soil organisms. This material commonly has a high water-content and high water-holding capacity. In topsoil, organic matter should not exceed 15% by weight, or approximately one-third of soil particles. [6] Above this limit, the soil will become prone to settlement, consolidation, and waterlogging. If soil remains waterlogged over an extended period of time, the soil will become anoxic, killing most plants and many soil organisms. [2] The selection of organic amendments can significantly influence the resulting soil properties and soil quality. [11]

Carbon fraction

In constructed soils, the carbon source is distinguished from the organic component as it is made up of materials that will decompose slowly, providing organic matter over time. Carbon is essential to the mediation of the organic matter decomposition rate in soils. A moderate carbon-to-nitrogen ratio (C:N ~ 20:1) will keep this rate at a level that provides a sustained release of nutrients into the soil. [12] This material also influences water retention in the soil.

Examples of Constructed Soil Materials
MineralOrganicCarbon
sand

silt

clay

gravel

compost

peat

manure

biosolids

sawdust

wood pulp

wood chips

tree bark

biochar

straw

Biological component

Soil, by definition, includes living organisms. [13] However, constructed soils do not typically include this factor in the development of soil mixtures. It is expected that biotic processes will initiate themselves as a site revegetates and soil formation (pedogenesis) begins. [2] Biotic processes are critical in the aggregation of soil particles and development of stable soil structure, [7] something which constructed soils typically lack. The selection of plants for revegetation will impact the soil biome progression. There have also been recent developments in inoculating the soil with specific organisms through methods like direct vegetation transfer. [14] Improved understanding of soil quality in stockpiles over time also has the potential to increase the retention of soil microorganisms. [15]

Related Research Articles

<span class="mw-page-title-main">Humus</span> Organic matter in soils resulting from decay of plant and animal materials

In classical soil science, humus is the dark organic matter in soil that is formed by the decomposition of plant and animal matter. It is a kind of soil organic matter. It is rich in nutrients and retains moisture in the soil. Humus is the Latin word for "earth" or "ground".

<span class="mw-page-title-main">Soil</span> Mixture of organic matter, minerals, gases, liquids, and organisms that together support life

Soil, also commonly referred to as earth or dirt, is a mixture of organic matter, minerals, gases, liquids, and organisms that together support the life of plants and soil organisms. Some scientific definitions distinguish dirt from soil by restricting the former term specifically to displaced soil.

Soil formation, also known as pedogenesis, is the process of soil genesis as regulated by the effects of place, environment, and history. Biogeochemical processes act to both create and destroy order (anisotropy) within soils. These alterations lead to the development of layers, termed soil horizons, distinguished by differences in color, structure, texture, and chemistry. These features occur in patterns of soil type distribution, forming in response to differences in soil forming factors.

<span class="mw-page-title-main">Topsoil</span> Top layer of soil

Topsoil is the upper layer of soil. It has the highest concentration of organic matter and microorganisms and is where most of the Earth's biological soil activity occurs.

The pedosphere is the outermost layer of the Earth that is composed of soil and subject to soil formation processes. It exists at the interface of the lithosphere, atmosphere, hydrosphere and biosphere. The pedosphere is the skin of the Earth and only develops when there is a dynamic interaction between the atmosphere, biosphere, lithosphere and the hydrosphere. The pedosphere is the foundation of terrestrial life on Earth.

<span class="mw-page-title-main">Podzol</span> Typical soils of coniferous or boreal forests

In soil science, podzols are the typical soils of coniferous or boreal forests and also the typical soils of eucalypt forests and heathlands in southern Australia. In Western Europe, podzols develop on heathland, which is often a construct of human interference through grazing and burning. In some British moorlands with podzolic soils, cambisols are preserved under Bronze Age barrows.

Tilth is a physical condition of soil, especially in relation to its suitability for planting or growing a crop. Factors that determine tilth include the formation and stability of aggregated soil particles, moisture content, degree of aeration, soil biota, rate of water infiltration and drainage. Tilth can change rapidly, depending on environmental factors such as changes in moisture, tillage and soil amendments. The objective of tillage is to improve tilth, thereby increasing crop production; in the long term, however, conventional tillage, especially plowing, often has the opposite effect, causing the soil carbon sponge to oxidize, break down and become compacted.

A soil horizon is a layer parallel to the soil surface whose physical, chemical and biological characteristics differ from the layers above and beneath. Horizons are defined in many cases by obvious physical features, mainly colour and texture. These may be described both in absolute terms and in terms relative to the surrounding material, i.e. 'coarser' or 'sandier' than the horizons above and below.

<span class="mw-page-title-main">World Reference Base for Soil Resources</span> International soil classification system

The World Reference Base for Soil Resources (WRB) is an international soil classification system for naming soils and creating legends for soil maps. The currently valid version is the fourth edition 2022. It is edited by a working group of the International Union of Soil Sciences (IUSS).

Claypan is a dense, compact, slowly permeable layer in the subsoil. It has a much higher clay content than the overlying material, from which it is separated by a sharply defined boundary. The dense structure restricts root growth and water infiltration. Therefore, a perched water table might form on top of the claypan. In the Canadian classification system, claypan is defined as a clay-enriched illuvial B (Bt) horizon.

<span class="mw-page-title-main">Detritus</span> Dead particulate organic material

In biology, detritus or is dead particulate organic material, as distinguished from dissolved organic material. Detritus typically includes the bodies or fragments of bodies of dead organisms, and fecal material. Detritus typically hosts communities of microorganisms that colonize and decompose it. In terrestrial ecosystems it is present as leaf litter and other organic matter that is intermixed with soil, which is denominated "soil organic matter". The detritus of aquatic ecosystems is organic substances that is suspended in the water and accumulates in depositions on the floor of the body of water; when this floor is a seabed, such a deposition is denominated "marine snow".

In biogeochemistry, remineralisation refers to the breakdown or transformation of organic matter into its simplest inorganic forms. These transformations form a crucial link within ecosystems as they are responsible for liberating the energy stored in organic molecules and recycling matter within the system to be reused as nutrients by other organisms.

<span class="mw-page-title-main">Dissolved organic carbon</span> Organic carbon classification

Dissolved organic carbon (DOC) is the fraction of organic carbon operationally defined as that which can pass through a filter with a pore size typically between 0.22 and 0.7 micrometers. The fraction remaining on the filter is called particulate organic carbon (POC).

Soil chemistry is the study of the chemical characteristics of soil. Soil chemistry is affected by mineral composition, organic matter and environmental factors. In the early 1870s a consulting chemist to the Royal Agricultural Society in England, named J. Thomas Way, performed many experiments on how soils exchange ions, and is considered the father of soil chemistry. Other scientists who contributed to this branch of ecology include Edmund Ruffin, and Linus Pauling.

Bulk soil is soil outside the rhizosphere that is not penetrated by plant roots. The bulk soil is like an ecosystem, it is made up of many things such as: nutrients, ions, soil particles, and root exudates. There are many different interactions that occur between all the members of the bulk soil. Natural organic compounds are much lower in bulk soil than in the rhizosphere. Furthermore, bulk soil inhabitants are generally smaller than identical species in the rhizosphere. The main two aspects of bulk soil are its chemistry and microbial community composition.

Soil organic matter (SOM) is the organic matter component of soil, consisting of plant and animal detritus at various stages of decomposition, cells and tissues of soil microbes, and substances that soil microbes synthesize. SOM provides numerous benefits to the physical and chemical properties of soil and its capacity to provide regulatory ecosystem services. SOM is especially critical for soil functions and quality.

<span class="mw-page-title-main">Soil carbon</span> Solid carbon stored in global soils

Soil carbon is the solid carbon stored in global soils. This includes both soil organic matter and inorganic carbon as carbonate minerals. It is vital to the soil capacity in our ecosystem. Soil carbon is a carbon sink in regard to the global carbon cycle, playing a role in biogeochemistry, climate change mitigation, and constructing global climate models. Natural variation such as organisms and time has affected the management of carbon in the soils. The major influence has been that of human activities which has caused a massive loss of soil organic carbon. An example of human activity includes fire which destroys the top layer of the soil and the soil therefore get exposed to excessive oxidation.

<span class="mw-page-title-main">Particulate organic matter</span>

Particulate organic matter (POM) is a fraction of total organic matter operationally defined as that which does not pass through a filter pore size that typically ranges in size from 0.053 millimeters (53 μm) to 2 millimeters.

The physical properties of soil, in order of decreasing importance for ecosystem services such as crop production, are texture, structure, bulk density, porosity, consistency, temperature, colour and resistivity. Soil texture is determined by the relative proportion of the three kinds of soil mineral particles, called soil separates: sand, silt, and clay. At the next larger scale, soil structures called peds or more commonly soil aggregates are created from the soil separates when iron oxides, carbonates, clay, silica and humus, coat particles and cause them to adhere into larger, relatively stable secondary structures. Soil bulk density, when determined at standardized moisture conditions, is an estimate of soil compaction. Soil porosity consists of the void part of the soil volume and is occupied by gases or water. Soil consistency is the ability of soil materials to stick together. Soil temperature and colour are self-defining. Resistivity refers to the resistance to conduction of electric currents and affects the rate of corrosion of metal and concrete structures which are buried in soil. These properties vary through the depth of a soil profile, i.e. through soil horizons. Most of these properties determine the aeration of the soil and the ability of water to infiltrate and to be held within the soil.

The soil matrix is the solid phase of soils, and comprise the solid particles that make up soils. Soil particles can be classified by their chemical composition (mineralogy) as well as their size. The particle size distribution of a soil, its texture, determines many of the properties of that soil, in particular hydraulic conductivity and water potential, but the mineralogy of those particles can strongly modify those properties. The mineralogy of the finest soil particles, clay, is especially important.

References

  1. Deeb, Maha; Groffman, Peter M.; Blouin, Manuel; Egendorf, Sara Perl; Vergnes, Alan; Vasenev, Viacheslav; Cao, Donna L.; Walsh, Daniel; Morin, Tatiana; Séré, Geoffroy (2020-09-08). "Using constructed soils for green infrastructure – challenges and limitations". Soil. 6 (2): 413–434. Bibcode:2020SOIL....6..413D. doi: 10.5194/soil-6-413-2020 . ISSN   2199-3971. S2CID   221875952.
  2. 1 2 3 4 5 6 Craul, Phillip J. (1999). Urban soils : applications and practices. James R. Lienhart. New York: Wiley. ISBN   0-471-18903-0. OCLC   39533956.
  3. Séré, Geoffroy; Schwartz, Christophe; Ouvrard, Stéphanie; Sauvage, Claire; Renat, Jean-Christophe; Morel, Jean Louis (2008-04-01). "Soil construction: A step for ecological reclamation of derelict lands". Journal of Soils and Sediments. 8 (2): 130–136. Bibcode:2008JSoSe...8..130S. doi:10.1065/jss2008.03.277. ISSN   1614-7480. S2CID   98710877.
  4. MacKenzie, Dean (2012). Best management practices for conservation of reclamation materials in the mineable oil sands region of Alberta. Alberta. Alberta Environment and Water, Canadian Electronic Library. Edmonton, Alta.: Alberta Environment and Water. ISBN   978-1-4601-0048-6. OCLC   812919514.
  5. "Contaminated Sites Regulation 375/96 -- Schedule 5". www.bclaws.gov.bc.ca. Retrieved 2021-05-01.
  6. 1 2 "Organic Matter Recycling Regulation". www.bclaws.gov.bc.ca. Retrieved 2021-05-01.
  7. 1 2 3 Weil, Ray R. (2016). The nature and properties of soils. Nyle C. Brady (Fifteenth ed.). Columbus, Ohio. ISBN   978-0-13-325448-8. OCLC   936004363.{{cite book}}: CS1 maint: location missing publisher (link)
  8. Arch, J. (1998), Parker, Andrew; Rae, Joy E. (eds.), "Clay Barriers in Landfills", Environmental Interactions of Clays: Clays and the Environment, Berlin, Heidelberg: Springer, pp. 207–242, doi:10.1007/978-3-662-03651-8_6, ISBN   978-3-662-03651-8 , retrieved 2021-05-01
  9. "Our Work | Sylvis". sylvis.com. Retrieved 2021-05-01.
  10. Pennock, Daniel John (2019). Soil erosion : the greatest challenge for sustainable soil management. Clara Lefevre, Global Soil Partnership, Food and Agriculture Organization of the United Nations. Rome, Italy. ISBN   978-92-5-131426-5. OCLC   1104062812.{{cite book}}: CS1 maint: location missing publisher (link)
  11. Scharenbroch, Bryant C.; Meza, Elsa N.; Catania, Michelle; Fite, Kelby (September 2013). "Biochar and Biosolids Increase Tree Growth and Improve Soil Quality for Urban Landscapes". Journal of Environmental Quality. 42 (5): 1372–1385. Bibcode:2013JEnvQ..42.1372S. doi:10.2134/jeq2013.04.0124. PMID   24216415.
  12. Cogger, Craig G. (2005-09-01). "Potential Compost Benefits for Restoration Of Soils Disturbed by Urban Development". Compost Science & Utilization. 13 (4): 243–251. Bibcode:2005CScUt..13..243C. doi:10.1080/1065657X.2005.10702248. ISSN   1065-657X. S2CID   95526841.
  13. "The Soil Biota | Learn Science at Scitable". www.nature.com. Retrieved 2021-05-01.
  14. Boyer, Stephane; Wratten, Stephen; Pizey, Mark; Weber, Paul (2011). "Impact of soil stockpiling and mining rehabilitation on earthworm communities". Pedobiologia. 54: S99–S102. Bibcode:2011Pedob..54S..99B. doi:10.1016/j.pedobi.2011.09.006. ISSN   0031-4056.
  15. Visser, S.; Fujikawa, J.; Griffiths, C. L.; Parkinson, D. (1984-02-01). "Effect of topsoil storage on microbial activity, primary production and decomposition potential". Plant and Soil. 82 (1): 41–50. Bibcode:1984PlSoi..82...41V. doi:10.1007/BF02220768. ISSN   1573-5036. S2CID   25449721.