Correction fluid

Last updated
Correction fluid can be written on after it has dried. Spelling Correction Example.jpg
Correction fluid can be written on after it has dried.
Tipp-Ex-Aqua-based.jpg
Liquid paper, picture and eraser.jpg
Correction fluid bottles
Correction pen Penna bianchetto.jpg
Correction pen

A correction fluid is an opaque, usually white fluid applied to paper to mask errors in text. Once dried, it can be handwritten or typed upon. It is typically packaged in small bottles, with lids attached to brushes (or triangular pieces of foam) that dip into the fluid. The brush applies the fluid to the paper.

Contents

Before the invention of word processors, correction fluid greatly facilitated the production of typewritten documents. One of the first forms of correction fluid was invented in 1956 by American secretary Bette Nesmith Graham, founder of Liquid Paper. [1] With the advent of colored paper stocks for office use, manufacturers began producing their fluids in various matching colors, particularly reds, blues and yellows.

Composition

Correction fluid copolymer visualized under scanning electron microscopy (SEM). The micro-structural details of the copolymer resin are visible under high magnifications. Correction fluid was applied on a glass base (visible in the bottom-right corner of all SEM images). SEM correction fluid.tif
Correction fluid copolymer visualized under scanning electron microscopy (SEM). The micro-structural details of the copolymer resin are visible under high magnifications. Correction fluid was applied on a glass base (visible in the bottom-right corner of all SEM images).

The exact composition of correction fluid varies between manufacturers, but most fluids are composed of an opacifying agent, a solvent (or thinner) and an adulterant 'fragrance' to discourage abuse. The opacifying agent can be composed of a mixture of titanium dioxide, [2] latex, and other polymer resins.[ citation needed ]

Thinner originally contained toluene, which was banned due to its toxicity. Later, it contained 1,1,1-trichloroethane, a skin irritant now widely banned under the Montreal Protocol on Substances That Deplete the Ozone Layer, and then the slightly safer trichloroethylene. Thinners currently used with correction fluid include bromopropane.[ citation needed ] Because it contains organic solvents (volatile organic compounds), unused correction fluid thickens over time as volatile solvents escape into the air. It can become too thick to use, and sometimes completely solidifies. Therefore, some manufacturers also sell bottles of solvent as "thinner", a few drops of which will return the correction fluid to its original liquid state. To avoid the inconveniences of organic solvents (safety and availability), some brands of fluid are water-based. However, those have the disadvantages of a longer drying time, and incompatibility with some inks (which will soak through them).

Abuse as an inhalant

Organic solvents are psychoactive when sufficient amounts are inhaled. Such solvents are common inhalants for adolescents [3] due, in part, to the fact that they are inexpensive in comparison to other recreational drugs. Use of correction fluid as an inhalant can cause the heart to beat rapidly and irregularly, which can cause death. An unpleasant smell is added to some brands in order to deter abusers. [4] Companies have worked closely with authorities in order to ensure that all the warnings are duly mentioned on packaging (card and product labels) to inform parents and younger users of the risks associated with inhaling or drinking the fluid. India has imposed a ban on the retail sale of bottled nail polish remover and bottled correction fluid, but permits its sale in devices that provide a small amount of the chemical in a container that dispenses it in a controlled way. The Ministry of Education also banned its use in schools in 2017. The manufacturer is required to affix a warning regarding the possible adverse effects on health if the material is inhaled. [5] [6]

Manufacturing process

Stainless steel tanks are used to hold 3,000 US gallons (11,000 L; 2,500 imp gal) or more. Specialists must consider the mixer and temperature control system carefully, and also the formula instructions, the correct types, and the amounts of raw materials at specified times by using computer controls. This process consists of 3 methods: firstly, compounding the batch; secondly, quality control check; and thirdly, filling and packing. [7]

Compounding the batch

In the first phase, water will be filled into the main batch tank. The suspending agents and some of the ingredients will be added in this phase. Mixing is implemented at low rate for adequate dispersion. During the mixing, there is no air added into the mixture.

In the second phase, pigment is in the process. It will be added in suitable amount into the water. Mixing is implemented at very high rate in this process which is different from the first phase. In the mixing process, when the particle is small enough, it will be added into the main batch.

In the final phase, the resin and other necessary ingredients will be added such as colorants and preservatives. [7]

Quality control check

In the process of checking the quality, specialists will check in the lab for physical and chemical characteristics such as pH determination, viscosity checks, appearance and odor evaluations.

In case of mistake such as the ingredients are not enough for making correction fluid, this problem will be solved by adding more ingredients. When this process is finished, the correction fluid will be pumped to a holding tank waiting for filling the correction fluid in the next method. [7]

Filling and packaging

Firstly, the filling process depends on the different package of each product. The filling line and the filling heads holding play a vital role in this process. The empty bottles will be in the conveyor belt and move continuously waiting for injecting correction fluid in each bottle.

Secondly, when the filling process is finished, it comes to the packing process. All the filled bottles will be moved to the capping machine to sort the caps and tighten them.

Finally, these bottles will be put into the box for shipping to the sellers and customers. [7]

Notable brands

Correction fluid is commonly referred to by the leading brand names as genericized. These brands include:

Synonyms by region

See also

Related Research Articles

<span class="mw-page-title-main">Amyl nitrite</span> Chemical compound

Amyl nitrite is a chemical compound with the formula C5H11ONO. A variety of isomers are known, but they all feature an amyl group attached to the nitrite functional group. The alkyl group is unreactive and the chemical and biological properties are mainly due to the nitrite group. Like other alkyl nitrites, amyl nitrite is bioactive in mammals, being a vasodilator, which is the basis of its use as a prescription medicine. As an inhalant, it also has a psychoactive effect, which has led to its recreational use, with its smell being described as that of old socks or dirty feet. It was first documented in 1844 and came into medical use in 1867.

<span class="mw-page-title-main">Inhalant</span> Chemical, often household, breathed in to cause intoxication

Inhalants are a broad range of household and industrial chemicals whose volatile vapors or pressurized gases can be concentrated and breathed in via the nose or mouth to produce intoxication, in a manner not intended by the manufacturer. They are inhaled at room temperature through volatilization or from a pressurized container, and do not include drugs that are sniffed after burning or heating. For example, amyl nitrite (poppers), gasoline, nitrous oxide and toluene – a solvent widely used in contact cement, permanent markers, and certain types of glue – are considered inhalants, but smoking tobacco, cannabis, and crack cocaine are not, even though these drugs are inhaled as smoke or vapor.

<span class="mw-page-title-main">Toluene</span> Chemical compound

Toluene, also known as toluol, is a substituted aromatic hydrocarbon with the chemical formula C6H5CH3, often abbreviated as PhCH3, where Ph stands for phenyl group. It is a colorless, water-insoluble liquid with the odor associated with paint thinners. It is a mono-substituted benzene derivative, consisting of a methyl group (CH3) attached to a phenyl group by a single bond. As such, its systematic IUPAC name is methylbenzene. Toluene is predominantly used as an industrial feedstock and a solvent.

<span class="mw-page-title-main">Solvent</span> Substance dissolving a solute resulting in a solution

A solvent is a substance that dissolves a solute, resulting in a solution. A solvent is usually a liquid but can also be a solid, a gas, or a supercritical fluid. Water is a solvent for polar molecules, and the most common solvent used by living things; all the ions and proteins in a cell are dissolved in water within the cell.

Naphtha is a flammable liquid hydrocarbon mixture. Generally, it is a fraction of crude oil, but it can also be produced from natural gas condensates, petroleum distillates, and the fractional distillation of coal tar and peat. In some industries and regions, the name naphtha refers to crude oil or refined petroleum products such as kerosene or diesel fuel.

<span class="mw-page-title-main">Liquid Paper</span> Brand of correction fluid

Liquid Paper is an American brand of the Newell Brands company marketed internationally that sells correction fluid, correction pens, and correction tape. Mainly used to correct typewriting in the past, correction products now mostly cover handwriting mistakes.

<span class="mw-page-title-main">1,1,1-Trichloroethane</span> Solvent, now banned for ozone depletion

The organic compound 1,1,1-trichloroethane, also known as methyl chloroform and chlorothene, is a chloroalkane with the chemical formula CH3CCl3. It is an isomer of 1,1,2-trichloroethane. This colorless, sweet-smelling liquid was once produced industrially in large quantities for use as a solvent. It is regulated by the Montreal Protocol as an ozone-depleting substance and its use is being rapidly phased out.

<span class="mw-page-title-main">Permanent marker</span>

A permanent marker or indelible marker is a type of marker pen that is used to create permanent or semi-permanent writing on an object.

Wite-Out is a registered trademark for a brand of correction fluid, originally created for use with photocopies, and manufactured by the BIC corporation.

<span class="mw-page-title-main">White spirit</span> Petroleum-derived clear, transparent liquid

White spirit (AU, UK and Ireland) or mineral spirits (US, Canada), also known as mineral turpentine (AU/NZ), turpentine substitute, and petroleum spirits, is a petroleum-derived clear liquid used as a common organic solvent in painting. There are also terms for specific kinds of white spirit, including Stoddard solvent and solvent naphtha (petroleum). White spirit is often used as a paint thinner, or as a component thereof, though paint thinner is a broader category of solvent. Odorless mineral spirits (OMS) have been refined to remove the more toxic aromatic compounds, and are recommended for applications such as oil painting.

A diluent is a diluting agent. Certain fluids are too viscous to be pumped easily or too dense to flow from one particular point to the other. This can be troublesome, because it might not be economically feasible to transport such fluids in this state. To ease this restricted movement, diluents are added. This decreases the viscosity of the fluids, thereby also decreasing the pumping/transportation costs.

<span class="mw-page-title-main">Tipp-Ex</span> Brand of correction fluid

Tipp-Ex is a brand of correction fluid and other related products that is popular throughout Europe. It was also the name of the German company that produced the products in the Tipp-Ex line. While Tipp-Ex is a trademark name for correction products, in some countries it has become a genericised trademark: to tippex or to tippex out means to erase, either generally or with correction fluid.

<span class="mw-page-title-main">Separatory funnel</span> Laboratory glassware

A separatory funnel, also known as a separation funnel, separating funnel, or colloquially sep funnel, is a piece of laboratory glassware used in liquid-liquid extractions to separate (partition) the components of a mixture into two immiscible solvent phases of different densities. Typically, one of the phases will be aqueous, and the other a lipophilic organic solvent such as ether, MTBE, dichloromethane, chloroform, or ethyl acetate. All of these solvents form a clear delineation between the two liquids. The more dense liquid, typically the aqueous phase unless the organic phase is halogenated, sinks to the bottom of the funnel and can be drained out through a valve away from the less dense liquid, which remains in the separatory funnel.

<span class="mw-page-title-main">Liquid–liquid extraction</span> Method to separate compounds or metal complexes

Liquid–liquid extraction, also known as solvent extraction and partitioning, is a method to separate compounds or metal complexes, based on their relative solubilities in two different immiscible liquids, usually water (polar) and an organic solvent (non-polar). There is a net transfer of one or more species from one liquid into another liquid phase, generally from aqueous to organic. The transfer is driven by chemical potential, i.e. once the transfer is complete, the overall system of chemical components that make up the solutes and the solvents are in a more stable configuration. The solvent that is enriched in solute(s) is called extract. The feed solution that is depleted in solute(s) is called the raffinate. Liquid-liquid extraction is a basic technique in chemical laboratories, where it is performed using a variety of apparatus, from separatory funnels to countercurrent distribution equipment called as mixer settlers. This type of process is commonly performed after a chemical reaction as part of the work-up, often including an acidic work-up.

<span class="mw-page-title-main">Glue stick</span> Solid adhesive in a twist or push-up tube

Glue sticks are solid and hard adhesives in twist or push-up tubes. Users can apply glue by holding the open tube to keep their fingers clean and rubbing the exposed stick against a surface.

A high-shear mixer disperses, or transports, one phase or ingredient into a main continuous phase (liquid), with which it would normally be immiscible. A rotor or impeller, together with a stationary component known as a stator, or an array of rotors and stators, is used either in a tank containing the solution to be mixed, or in a pipe through which the solution passes, to create shear. A high-shear mixer can be used to create emulsions, suspensions, lyosols, and granular products. It is used in the adhesives, chemical, cosmetic, food, pharmaceutical, and plastics industries for emulsification, homogenization, particle size reduction, and dispersion.

<span class="mw-page-title-main">Fire accelerant</span> Substance that speeds the development of fire

In fire protection, an accelerant is any substance or mixture that accelerates or speeds the development and escalation of fire. Accelerants are often used to commit arson, and some accelerants may cause an explosion. Some fire investigators use the term "accelerant" to mean any substance that initiates and promotes a fire without implying intent or malice. In Arson investigation, the significance of accelerant is to detect the presence of a such substance in order to proved that the fire is classified as an arson.

Isopropyl alcohol is a colorless, flammable organic compound with a pungent alcoholic odor.

<span class="mw-page-title-main">Extraction (chemistry)</span> Separation of a desired substance from other substances in the sample

Extraction in chemistry is a separation process consisting of the separation of a substance from a matrix. The distribution of a solute between two phases is an equilibrium condition described by partition theory. This is based on exactly how the analyte moves from the initial solvent into the extracting solvent. The term washing may also be used to refer to an extraction in which impurities are extracted from the solvent containing the desired compound.

<span class="mw-page-title-main">Rugby boy</span> Gangs of street children in the Philippines

Rugby boys are a collective term for gangs of street children found in the Philippines. They are one of the most well-known poverty-afflicted people found in the slums of the Philippines. They are known for using and being addicted to a contact cement known as "Rugby" brand manufactured by Bostik and other aromatic solvents to alleviate their hunger, and resulting in crime to fund their addiction.

References

  1. "Liquid Paper - Bette Nesmith Graham Invented Liquid Paper". Inventors.about.com. 2012-04-09. Archived from the original on July 12, 2012. Retrieved 2013-03-28.
  2. "What Chemicals Are in Correction Fluid?". Sciencing. 2017-02-17. Archived from the original on 2017-02-17. Retrieved 2024-02-13.
  3. "Sniffing Correction Fluid Can Stop Your Heart (1991)". Profiles.nlm.nih.gov. 2010-06-03. Retrieved 2013-03-28.
  4. "AROUND THE NATION; Youths Urged To Avoid Inhaling Typing Fluid". The New York Times . 1984-05-10. ISSN   0362-4331 . Retrieved 2024-02-13.
  5. "Press Information Bureau". Pib.nic.in. Retrieved 2018-08-13.
  6. "Whitener addiction on the rise among teens". The Times of India . 14 June 2014.
  7. 1 2 3 4 "How Products Are Made. Correction Fluid". March 28, 2018.