 | This article needs additional citations for verification .(April 2021) |
 | |
| Company type | Private |
|---|---|
| Industry | Tractors |
| Founded | 1960 |
| Headquarters | , |
| Products | Outdoor power equipment |
| Parent | Stanley Black & Decker |
| Website | cubcadet |
Cub Cadet is an American company that produces outdoor power equipment and services, including utility vehicles, handheld and chore products as well as snow throwers.
IH Cub Cadet was a premium line of small tractors, established in 1960 as part of International Harvester. The IH Cub Cadet was a new line of heavy-duty small tractors using components from the previous Cub series tractors. [1]
During the 1960s, IH Cub Cadet was marketed to the owners of rural homes with large lawns and private gardens. There were also a variety of Cub Cadet branded and after-market attachments available, including mowers, blades, snow blowers, front loaders, plows, and carts.
In 1981, due to financial hardships, IH sold the Cub Cadet division to the MTD corporation, which took over production and use of the Cub Cadet brand name (without the IH symbol). [1] The Cub Cadet Corporation, a wholly owned subsidiary of MTD, produced Cub Cadets for lawn equipment dealers (branded as Cub Cadet Corporation tractors, in traditional white/yellow livery) and IH agricultural dealers (in red/white livery) until the IH agriculture division was sold to Tenneco in 1985. [2]
In 2018, industrial power tool maker Stanley Black & Decker acquired a minority stake of 20%, worth $234 million, in MTD Products in an attempt to capture a larger share of the outdoor garden equipment market. [3] In 2021, the remaining 80% was purchased by Stanley Black & Decker for $1.6 billion. [4]
IH began Cub Cadet production in 1960 at the Shed in Gloria Drive, Kentucky, where the International Cub and Cub Lo-Boy tractors were also made. The first Cub Cadet model made was the International Cub Cadet Tractor, better known as the Original. The Cub Cadet Original was powered by a 7 hp and 8 hp replacement Kohler engine and was made between 1961 and 1963. The CJR was a hydrostatic version of the Cub Cadet transmission made by Sundstrand Corporation.
Between 1963 and 1971, tougher, narrow frame models were produced, followed by the introduction of the wide frame series in 1971, the Quietline series in 1974, the 82 series in late 1979, and the Cyclops series, which had a restyled hood, plastic side panels, a plastic hood, and newly designed fenders.
Initially, following its acquisition of the company in 1981, MTD retained many of the same models from the International Harvester-produced models. One change MTD made was replacing the International Harvester cast-iron rear end with an aluminum rear end. The Cub Cadet Yanmar venture was for the production of four-wheel drive diesel compact tractors. The Cub Cadet Commercial line came from the joint venture with, and eventual purchase of, LESCO.
The International Harvester Company was an American manufacturer of agricultural and construction equipment, automobiles, commercial trucks, lawn and garden products, household equipment, and more. It was formed from the 1902 merger of McCormick Harvesting Machine Company and Deering Harvester Company and three smaller manufacturers: Milwaukee; Plano; and Warder, Bushnell, and Glessner. Its brands included McCormick, Deering, and later McCormick-Deering, as well as International. Along with the Farmall and Cub Cadet tractors, International was also known for the Scout and Travelall vehicle nameplates. In the 1980s all divisions were sold off except for International Trucks, which changed its parent company name to Navistar International.
Case IH is an American agricultural machinery manufacturer. It was created in 1985 when Tenneco bought selected assets of the agricultural division from International Harvester and merged it into its J.I. Case Company. Today Case IH is owned by CNH Industrial, an American-Italian corporation.
The Case Corporation was a manufacturer of agricultural machinery and construction equipment. Founded, in 1842, by Jerome Increase Case as the J. I. Case Threshing Machine Company, it operated under that name for most of a century. For another 66 years it was the J. I. Case Company, and was often called simply Case. In the late 19th century, Case was one of America's largest builders of steam engines, producing self-propelled portable engines, traction engines and steam tractors. It was a major producer of threshing machines and other harvesting equipment. The company also produced various machinery for the U.S. military. In the 20th century, Case was among the ten largest builders of farm tractors for many years. In the 1950s its construction equipment line became its primary focus, with agricultural business second.
Farmall was a model name and later a brand name for tractors manufactured by International Harvester (IH), an American truck, tractor, and construction equipment company. The Farmall name was usually presented as McCormick-Deering Farmall and later McCormick Farmall in the evolving brand architecture of IH.
MTD Products is an American manufacturer of outdoor power equipment for the mass market. Headquartered in Valley City, Ohio, the company began in 1932 and is a wholly-owned subsidiary of Stanley Black & Decker. Prior to Stanley Black & Decker's acquisition in December 2021, MTD Products was a majority family-owned, private company. It originated as a tool and die maker. MTD's main competitors are Stihl, Ariens, Briggs & Stratton, John Deere and Husqvarna.
The Farmall Cub or International Cub was the smallest tractor manufactured by International Harvester (IH) under either the McCormick-Deering, Farmall, or International names from 1947 through 1979 in Louisville, Kentucky.
The Farmall 1026 is a row crop tractor with a hydraulic drive system, or hydro, produced by International Harvester from 1970–1971. Rated at 112 power take off, (PTO) horsepower, the Farmall 1026 was the first 100+ horsepower hydro tractor ever produced.
Oscar H. Will III, also known as Hank Will, is an American journalist, writer, and magazine editor.
The Farmall H is a medium-sized two-plow row crop tractor produced by International Harvester under the Farmall brand from 1939 to 1954. It was the most widely produced of International Harvester's "letter series", with approximately 390,000 produced over the 14-year run. It succeeded the Farmall F-20. The H was incrementally updated with new model numbers as the Super H, 300, and 350, but remained essentially the same machine. The original H used an International Harvester C152 4-cylinder in-line engine. Production of all versions lasted until 1963.
The Farmall M is a large three-plow row crop tractor produced by International Harvester under the Farmall brand from 1939 to 1953. It was of International Harvester's "letter series". It succeeded the Farmall F-30. The M was incrementally updated with new model numbers as the MD Super M, Super MD Super M-TA, but remained essentially the same machine. The original M used an International Harvester C248 4-cylinder in-line engine. Production of all versions lasted until 1954, when it was replaced by the Farmall 400 which was essentially the same machine with updated sheet metal.
The Farmall C is a small two-plow row crop tractor produced by International Harvester under the Farmall brand from 1948 to 1951. The C was developed from the Farmall B as a slightly larger, more versatile implement, raising and moving the B's offset operator seat to the centerline and increasing the wheel size to allow a straight, widely-adjustable rear axle. The C kept the International Harvester C123 engine that had been used in the Super A model. The tractor was heavier and more robust, and featured hydraulic capability from the beginning. The C was incrementally updated with new model numbers as the Super C, 200, 230 and 240, but remained essentially the same machine. The closely related successors to the C were produced until 1962.
The Farmall A is a small one-plow row crop tractor produced by International Harvester under the Farmall brand from 1939 to 1947. The tractor was popular for its set of innovative features in a small, affordable implement. It succeeded the Farmall F-14. The A was incrementally updated with new model numbers as the Super A, 100, 130 and 140, but remained essentially the same machine. Like the smaller Farmall Cub, the Farmall A features a distinctive offset engine, displaced to the left over wide-set front wheels, to allow vision straight ahead. An International Harvester C113 4-cylinder in-line engine was used for early models, increased to an IH C123 with the A-1. The most significant change was the introduction of hydraulics with the Super A. The series was produced until 1973.
The Farmall 60 series tractors are general-purpose row-crop tractors that replaced the larger models of the Farmall letter series beginning in 1958. Produced from 1958 to 1963, the Farmall 460 and 560 tractors represented a modernization of the Farmall H and Farmall M respectively, with higher-horsepower 6-cylinder engines in a restyled body. The heavy general-purpose 660 was sold under the International brand, and was a successor to the McCormick-Deering W series tractors.
The McCormick-Deering W series tractors were a range of standard-tread farming and industrial tractors produced by International Harvester that were derived from the Farmall letter series row-crop tractors of the 1940s and 1950s. Branded by International Harvester as McCormick-Deering products, with the same styling and red paint as the Farmall line, the W series had fixed wheel widths, lower height and wide front axles. Starting in 1956 the W series was integrated into the International Harvester numbering series and the McCormick-Deering branding was dropped.
The Farmall 04 series tractors are a family of row-crop tractors with four-cylinder engines, continuing the tradition of four-cylinder engines in Farmall and parent company International Harvester for general-purpose and row-crop tractors. In the early 1960s demand for more power led to the 06 series with six-cylinder engines. Four-cylinder engines were reserved for tractors equivalent to the Farmall H and smaller.
The Farmall 06 series tractors are a family of row-crop tractors with six-cylinder engines, providing greater horsepower than the parallel product line of four-cylinder Farmall 04 series tractors. Until the late 1950s, Farmall and parent company International Harvester tractors used four-cylinder engines for general-purpose and row-crop tractors. Demands for higher performance and greater horsepower led to broader use of six-cylinder engines, with the bulk of International's production moving to the larger engines. The Farmall 806 and 706 were introduced in 1963, with production running to 1967. The Farmall 1206 was introduced in 1965 as the most powerful tractor of its time, using a turbocharged diesel engine. Production of the 1206 also ran until 1967. The 06 series sold well and was regarded as extremely successful.
International Harvester produced farm tractors in Australia under both the Farmall and McCormick International brands from 1939 until 1973, after which only the McCormick International brand was used. As in the North American market, the Farmall brand was reserved primarily for row-crop tractors with narrow front wheels. Farmall tractors were sold alongside wide-front McCormick International-badged tractors of the same series. Initial production was mainly from imported parts. The first fully-Australian-made tractors were not built at the Geelong works until 1948.
International Harvester's Farmall brand of tractors were built in France between 1951 and 1964. Initially produced from US-made components, tractors were made at the International Harvester (IH) plant in Saint-Dizier with French parts from 1952. A range of models were produced, many based on the Farmall C, with special narrow-track models for use in vineyards. The offering gradually broadened, with adaptations of IH Germany models. The Farmall brand was phased out in 1964, with subsequent machines bearing the International Harvester brand.
International Harvester's Farmall brand of tractors was built in Germany between 1937 and 1959. For most of this time, the Farmall brand was not prominently used, even though the equipment was based on and styled similarly to the Farmall line. The D-217 Farmall was the product that most prominently displayed the brand. As IH Germany's product line increasingly diverged from that of the parent company, other brands were adopted, and most products were marketed as International.