Delaware and Hudson Gravity Railroad

Last updated

Delaware and Hudson Canal Company Gravity Railroad
DnH-gravity.pa.track.jpg
Gravity Railroad; Honsdale, PA; September 1899 (3738728921).jpg
Overview
Locale Pennsylvania
Dates of operation18291899
Technical
Track gauge 4 ft 3 in (1,295 mm)

A predecessor to the Class I Delaware and Hudson Railway , the 1820s-built Delaware and Hudson Canal Company Gravity Railroad('D&H Gravity Railroad') was a historic gravity railroad incorporated and chartered in 1826 with land grant rights in the US state of Pennsylvania [lower-alpha 1] as a humble subsidiary of the Delaware and Hudson Canal and it proved to contain the first trackage of the later organized Delaware and Hudson Railroad (so eventually became a first class Class I Railroad). It began as the second long [lower-alpha 2] [lower-alpha 3] U.S. gravity railroad [lower-alpha 4] built initially to haul coal to canal boats, was the second railway chartered in the United States after the Mohawk and Hudson Rail Road [lower-alpha 5] before even, the Baltimore and Ohio (e. 1827). As a long gravity railway, [lower-alpha 6] only the Summit Hill and Mauch Chunk Railroad (e. 1827) pre-dated its beginning of operations.

Contents

Description

The 4 ft 3 in (1,295 mm) narrow gauge railroad carried coal from Carbondale North-northeast of Scranton over the Moosic Mountains to the D&H Canal in Honesdale. The gravity railroad was opened in 1829, [1] then like most early railways, modified and expanded in stages through 1868. In its final form, the railroad used separate loaded and light tracks. In the gravity railway part, unpowered trains ran by gravity to the bottom of a grade manned by a brakeman operating a muscle powered hand-brake to control speed of descent, to the loading chutes. After being emptied, they were attached to a cable wound on large winch wheels (similar to a ski lift) and hauled up a short, steep inclined planes by a stationary steam engine. The loaded tracks had planes pointing in the direction of Honesdale; the light (return) tracks had planes pointing in the direction of Carbondale.

The gravity railroad operated until 1899, when the canal was abandoned, and was replaced entirely by a new standard 4 ft 8+12 in (1,435 mm) standard gauge line to be used as a conventional steam railroad. [2] Many traces of the tracks remain in the Moosic Mountains. They can still be located on current aerial photographs.

The Delaware and Hudson Canal Gravity Railroad Shops have been demolished, but were once listed on the National Register of Historic Places. [3]

History

Initial Construction

The railroad was originally constructed as a single track from Carbondale to Honesdale. It contained 5 planes ascending 863 feet (263 m) from Carbondale to the summit at Rix's Gap in the Moosic Mountains, and three planes on the 950-foot (290 m) descent to Honesdale where the railroad terminated at the D&H Canal. Each ascending plane was powered by a stationary steam engine which lifted the loaded cars to a "level" which was graded slightly to allow the loaded cars to roll by gravity to the foot of the next plane. In the opposite direction, the empty cars were towed by horses. Each plane contained a single track, with an automatically switched siding in the center where the loaded and empty cars could pass.

The descent of loaded cars between Waymart and Honesdale was interrupted by only a single plane at Prompton, where the track crossed to the north bank of the river and followed its course to Honesdale. From Waymart to Prompton, loaded cars coasted down the "six-mile level" (9.7 km), and after descending the plane at Prompton, were drawn by horses to the Honesdale terminal over the "four-mile level" (6.4 km). The levels were graded so that gravity alone would carry loaded cars on the six-mile level descending at the rate of 44 feet per mile (8.3 m/km), while the four-mile level descended at 26 feet per mile (4.9 m/km) and required horses in both directions, with one horse towing 5 cars. [4]

Much of the railroad was built of trestles constructed from the region's native hemlocks. The rails were 6-by-12-inch (15 cm × 30 cm) hemlock timbers approximately 20 to 30 feet (6.1 to 9.1 m) long, placed on edge. The rails were surfaced with a half-inch thick, two and a half-inch wide (1.3 cm × 6.4 cm) iron strap screwed to the top. After a short time in service, the hemlock was discovered to be too soft, and a 4-inch (10 cm) wide hardwood board was positioned under the iron. [5] On August 8, 1829, the railroad performed a trial of the first steam locomotive in America, the Stourbridge Lion, over the 3-mile (4.8 km) stretch of track from Honesdale to Seelyville, where a low bridge prevented further travel. The shaking timber trestles and rails convinced the officials that the road would not support the use of the locomotive, which was retired and never again used.

Horses drew the loaded cars from the mines to the foot of plane no.1 in Carbondale. In 1836, a short water-powered plane was added to lift loaded cars from the mine to a trestle crossing the river into Carbondale. [6]

1844 Improvements

The road was designed to carry the output of the D&H's mine at Carbondale, transporting 100,000 tons per year (91,000 t) to the canal. In 1844, it was apparent that the road's capacity needed to be increased. The improvements raised the capacity to 500,000 tons per year (450,000 t). [4]

The planes from Carbondale to the summit were realigned to shorten the summit level and increase its grade, and the long Plane No. 6 at Waymart was split into two planes. The road was also double-tracked. The most significant change was the addition of a separate "light track" to return empty cars from Honesdale to Waymart, and the elimination of the plane for loaded cars at Prompton. The light track contained 5 planes, which, except for the first plane at Honesdale, were positioned to take advantage of water power to lift the empty cars on the return trip to Waymart. The track for loaded cars was realigned at Prompton to eliminate the plane there, which allowed the loaded cars to coast under gravity power over a new "ten-mile level" (16 km) from Waymart to Honesdale, which now stayed along the southern bank of the river, descending 44 feet per mile (8.3 m/km) until reaching Honesdale. [4]

The light track originally was carried by a 100-foot (30 m) high trestle across the ravine leading to Cadjaw Pond outside of Honesdale, but in 1848, the trestle was replaced by a horseshoe curve. [7]

Southern extensions to Archbald and Olyphant

In 1848, the D&H extended the gravity railroad southward from Carbondale to newly opened mines at White Oak Run in Archbald. The extension continued the scheme for light and loaded tracks that had been adopted for the 1844 improvements. The light track commenced with a single "back plane" that lifted empty cars to the light track at Carbondale, where they then rolled under gravity power to the mine at Archbald. The loaded cars were towed from the mine to the foot of two planes at Archbald; after the planes lifted them they coasted to Carbondale. [4]

Ten years later in 1858, additional mines were opened at Olyphant and the road was extended further. The planes on the southern extension were labeled with the letters "A" through "G" in north to south order from Carbondale to Olyphant. [7]

Other important changes were made to the railroad. When originally built in 1829, iron chains were used to move the cars up and down the planes. Frequently the chains broke with catastrophic effect, so blacksmith forges were maintained beside the planes to facilitate repairs. It was soon found that hemp rope performed better than the chains, and all planes were converted to rope. In 1858, the hemp ropes were replaced with wire rope that had been manufactured by the Roebling company. Also during those improvements the strap iron rails were replaced with T rail. [8]

Steam-powered extension to Providence and Scranton

In 1860, the D&H opened new mines in Providence and extended the line to them, a distance of approximately 4 miles (6.4 km). Rather than continuing the gravity line to the mines, the D&H used its first steam locomotives on the new line south of Olyphant, using the 4 ft 3 in (1,295 mm) narrow gauge of the gravity railroad. [7] In 1863, the railroad was extended to the Scranton terminal at Vine Street, where the company built a station and office building. The railroad also started daily passenger service from the Vine Street station to Carbondale.

In 1871, the steam line was extended northward from Valley Junction at Olyphant to Carbondale, where the line connected to the Jefferson Railroad and the Erie Railroad. Portions of this "valley line" had four rails: a common rail, a rail for the 4 ft 3 in (1,295 mm) narrow gauge of the gravity railroad, a rail for 4 ft 8+12 in (1,435 mm) standard gauge , and a rail for the 6 ft (1,829 mm) broad gauge of the Erie. [7]

1868 renovations

1868 improvements between Carbondale and Honesdale D&H Gravity - 1868 Carbondale.png
1868 improvements between Carbondale and Honesdale

In 1866, the D&H purchased the Union Coal Company Railroad which connected with the D&H at Green Ridge. Even though the line was under a 20-year lease to the Lehigh and Susquehanna (which in turn was leased to the Central Railroad of New Jersey) and the D&H could not begin operating the line until 1886, the company nevertheless anticipated increased coal tonnage as a result of its 1866 acquisition, and expanded the gravity road accordingly. After the improvements the line had a capacity of 3,000,000 tons (2,700,000 t) annually, which remained its capacity until its closure in 1899.

Substantial modification was made to the line between Carbondale and Waymart. The five planes which raised loaded cars to the summit at Rix's Gap were replaced by eight planes on a completely new alignment, the separate light track was extended from Waymart to the head of the back plane at Carbondale, and the back plane was eliminated. [7] The water-powered planes on the light track had already been replaced by stationary steam engines, and all planes were being operated by steam.

The new light track contained a 400-foot (120 m) radius hairpin turn at Panther Bluffs which became known as the Shepherd's Crook, later providing extensive views when passenger service between Carbondale and Honesdale was started in 1877.

The planes were re-numbered consecutively starting at Carbondale, following the loaded route to Honesdale, then back on the light track to Olyphant, and finally up the loaded track to Carbondale. The gravity line kept that 1868 form for the remainder of its life as a gravity operation. Following the abandonment of the canal in 1898, the gravity line was abandoned and replaced with a 4 ft 8+12 in (1,435 mm) standard gauge steam line, which operated until its abandonment in 1931.

1899 steam line between Carbondale and Honesdale D&H Gravity - 1899 Carbondale.png
1899 steam line between Carbondale and Honesdale

The steam line followed the route of the loaded track between Waymart and Honesdale, and a new alignment from Waymart to Carbondale was built around the foot of Moosic Mountain, looping south to Canaan and rejoining the light line near the head of plane no. 20 at Rix's Gap, where it continued along the light route to Bushwick and Lookout Junction. The hairpin turn at Shepherd's crook was replaced with a switchback.

Passenger service

Although designed for transporting coal to the canal at Honesdale, the line became a popular excursion route when it began passenger operations. Service began as early as 1860 with two small passenger cars running the steam-powered segment between Providence and Valley Junction at Olyphant. By 1868, daily service operated between Carbondale and Providence consisting of 8 passenger and 2 baggage cars. In 1877, passenger service began between Carbondale and Honesdale. [7]

To increase the road's popularity with visitors, the D&H built a 600-acre (240 ha) picnic park at Farview near the highest elevation of the line. A hike up a mountain trail to observation towers at the High Knob peak offered visitors extensive vistas. A connection from the light track to the loaded track was constructed at Bushwick for the convenience of passengers from Honesdale. The passengers cars were met by steam engines at Lookout Junction and brought into Carbondale.

In 1907, the D&H offered the 625 acres (253 ha) it owned at Farview to the state for construction of a state hospital for the criminally insane. The state combined the D&H property with a 468-acre (189 ha) farm and the Fairview facility remains in use to this date as the State Correctional Institution – Waymart. (Although the D&H picnic park was named Farview, the state institutions used the name Fairview.)

Notes

  1. Excepting the Mohawk and Hudson Railroad chartered also in 1826, and the converted wagon road that went operational in the spring of 1827, the Summit Hill & Mauch Chunk Railroad, all other known and documented non-military built early American Industrial Revolution Railways longer than three miles were comparatively short 'private industrial operations' (i.e. private roads across privately held lands) built by private interests so had no need for land grant charter or right-of-ways beyond permissions of their own management. However, this rule is excepted by both the 1st and 2nd constructed & operational railroads, both of 3 miles (4.8 km)s built for hauling quarried stone to docks at the tidewaters: the 1st chartered & 1st built Leiper Railroad (1810) near Philadelphia, and the Granite Railroad (c. 1826), near Boston, which city, had already had experience seeing two decades of railed roads – the use of temporary portable funicular tramways as it began the decades long process of filling in its Back Bay mudflats. The (eventually) belatedly chartered Mauch Chunk and Summit Hill Railroad (c. 1827) that went operational third was much longer – over 9 miles (14 km) which was eventually both doubled with the advent of its back track (return track) cable railway in 1847, but also enlarged by several miles by its famous switchback zig-zag tracks and two cable inclines up from their various mines in the Panther Creek Valley.
  2. Placements of a Railway companies founding date such as the first, second, and third rankings among historians devolve into trivial differences between American entities over quibble-some facts, not always easy to document, such as construction start and completion dates. Incorporation dates often depended upon receiving a charter, which depended upon some company applying for rights which in some cases required a formed corporation, or only a formal letter of intentions one would be formed (which might be provisional on the legislation!) and often could expire or incorporate later provisional to obtaining starter-financing – in short 'a which comes first' decision is often a conundrum of causality.
    Is the railroad part of a company, and if so, did it obtain a charter then incorporate, or incorporate then apply to a legislative body for land grant rights? Was it a private railroad built solely on private lands, so did not require charters beyond the corporations (e.g. the SH&MC gravity coal railroad built by the Lehigh Coal & Navigation Company according to the book, the Delaware and Lehigh Canals had no charter but became the unquestioned second operational common carrier railroad over three miles length.)
    The Commonwealth Chartered Granite Railroad in Quincy, Massachusetts, was the first chartered in the 1820s, and completed and to operate, but the first chartered, built and operated was the humble Leiper Railroad that was born in 1810 from the desire to have a canal—and received a charter accidentally, as something of a consolation prize. Several small mining railroads also 'scored' before the SH&MC was built in 1827 by the LC&N.) When did construction begin? Did finances lag and retard completion? When (finally?!) did it begin operations? In point of fact, from 1826 onward – railroads popped up as suggested solutions just about everywhere for a country now sensitized to the need to develop transportation infrastructures. These entities often had only a nominal existence (on paper) for several years whilst their supporters tried to raise funds, or were sham power plays where some speculators secured the right-of-ways to a region, holding it as a resource for latter sale. In short, such rankings are something of a complicated quagmire—no matter how you rank them, you are likely to be wrong in some way.
  3. Nonetheless, several things stand out for railroads which survived beyond a company's first decade: Three railways were chartered in different polities in 1836, the Granite Railroad, the Mohawk and Hudson Railroad and the Delaware & Hudson Gravity Railroad, which may well have inspired the other two given the founding of the parent company in 1823 and the small relative population of investors that early in the country history.
  4. The D&HGRR was definitely conceived of first, and may have inspired the Summit Hill and Mauch Chunk Railroad, but Josiah White had carefully surveyed and laid out the SH&MC as a wagon road with a near constant grade and once the board authorized the project in 1827, it took only a few weeks for Lehigh Coal & Navigation Company to lay iron capped wooden tracks down the well engineered wagon road bed (finished in 1818) and begin operations as the 2nd operating railroad.
  5. The Mohawk and Hudson Rail Road was built to cut across a loop (shorten a long stretch) along the Erie Canal.
  6. The Summit Hill and Mauch Chunk Railroad, like the B&O did not start with steam power, nor initially have cable railway capabilities. It began as a gravity railroad with Mule drawn wagon trains dragging coal cars up the 9 miles back trip to Summit Hill. Its cable winches, stationary engines, and back track were not added until LC&N had engineered the Ashley Planes after establishing the first U.S. wire rope factory in America.

Footnotes

  1. Shaughnessy 1997 , p. 6
  2. Old Colony Trust Company (1913). Analyses of the Railroad Corporations Whose Bonds are a Legal Investment for Massachusetts Savings Banks, p. 243. Priv. print.
  3. "National Register Information System". National Register of Historic Places . National Park Service. July 9, 2010.
  4. 1 2 3 4 Archbald, James (1847). "Report to John Wurts, President of the Delaware and Hudson Canal Company". American Railroad Journal. 20: 375–376.
  5. The Delaware and Hudson Company 1925 , p. 55
  6. The Delaware and Hudson Company 1925 , p. 101
  7. 1 2 3 4 5 6 Best, G. M. (1951). "The Gravity Railroad of the Delaware & Hudson Canal Company". Bulletin of the Railway & Locomotive Historical Society (82): 7–22.
  8. The Delaware and Hudson Company 1925 , p. 155

Related Research Articles

<span class="mw-page-title-main">Carbondale, Pennsylvania</span> City in Pennsylvania, United States

Carbondale is a city in Lackawanna County, Pennsylvania, United States. Carbondale is located approximately 15 miles due northeast of the city of Scranton in Northeastern Pennsylvania. The population was 8,828 at the 2020 census.

<span class="mw-page-title-main">Honesdale, Pennsylvania</span> Borough in Pennsylvania, United States

Honesdale is a borough in and the county seat of Wayne County, Pennsylvania, United States. The borough's population was 4,458 at the time of the 2020 census.

<span class="mw-page-title-main">Timeline of United States railway history</span>

The Timeline of U.S. Railway History depends upon the definition of a railway, as follows: A means of conveyance of passengers and goods on wheeled vehicles running on rails, also known as tracks.

<span class="mw-page-title-main">Morris Canal</span> Canal in New Jersey

The Morris Canal (1829–1924) was a 107-mile (172 km) common carrier anthracite coal canal across northern New Jersey that connected the two industrial canals in Easton, Pennsylvania across the Delaware River from its western terminus at Phillipsburg, New Jersey to New York Harbor and New York City through its eastern terminals in Newark and on the Hudson River in Jersey City. The canal was sometimes called the Morris and Essex Canal, in error, due to confusion with the nearby and unrelated Morris and Essex Railroad.

<i>Stourbridge Lion</i> Railroad steam locomotive built in 1829

The Stourbridge Lion was a railroad steam locomotive. It was the first locomotive and the first foreign built locomotive to be operated in the United States, and one of the first locomotives to operate outside Britain. It takes its name from the lion's face painted on the front, and Stourbridge in England, where it was manufactured by the firm Foster, Rastrick and Company in 1829. The locomotive, obtained by the Delaware & Hudson Canal Company (D&H), was shipped to New York in May 1829, where it was tested raised on blocks. It was then taken to Honesdale, Pennsylvania for testing on the company's newly built track. The locomotive performed well in its first test in August 1829, but was found to be too heavy for the track and was never used for its intended purpose of hauling coal wagons. During the next few decades, a number of parts were removed from the abandoned locomotive until only the boiler and a few other components remained. These were acquired by the Smithsonian Institution in 1890 and are currently on display at the B&O Railroad Museum in Baltimore.

A gravity railroad or gravity railway is a railroad on a slope that allows cars carrying minerals or passengers to coast down the slope by the force of gravity alone. The speed of the cars is controlled by a braking mechanism on one or more cars on the train. The cars are then hauled back up the slope using animal power, a locomotive or a stationary engine and a cable, a chain or one or more wide, flat iron bands. A much later example in California used 4 ft 8+12 instandard gauge steam engines to pull gravity cars back to the summit of Mt. Tamalpais.

<span class="mw-page-title-main">Foster, Rastrick and Company</span>

Foster, Rastrick and Company was one of the pioneering steam locomotive manufacturing companies of England. It was based in Stourbridge, Worcestershire, now West Midlands. James Foster, an ironmaster, and John Urpeth Rastrick, an engineer, became partners in 1816, forming the company in 1819. Rastrick was one of the judges at the Rainhill Trials in 1829. The company was dissolved on 20 June 1831.

<span class="mw-page-title-main">Delaware and Hudson Railway</span> Railroad in the northeastern United States

The Delaware and Hudson Railway (D&H) is a railroad that operates in the Northeastern United States. In 1991, after more than 150 years as an independent railroad, the D&H was purchased by the Canadian Pacific Railway (CP). CP operated D&H under its subsidiary Soo Line Corporation which also operates Soo Line Railroad.

<span class="mw-page-title-main">Oldest railroads in North America</span> List of earliest railroads in North America

This is a list of the earliest railroads in North America, including various railroad-like precursors to the general modern form of a company or government agency operating locomotive-drawn trains on metal tracks.

<span class="mw-page-title-main">Delaware and Hudson Canal</span> Former canal in New York and Pennsylvania, United States

The Delaware and Hudson Canal was the first venture of the Delaware and Hudson Canal Company, which would later build the Delaware and Hudson Railway. Between 1828 and 1899, the canal's barges carried anthracite coal from the mines of northeastern Pennsylvania to the Hudson River and thence to market in New York City.

<span class="mw-page-title-main">The Stourbridge Line</span> Shortline railroad based in Honesdale, Pennsylvania

The Stourbridge Line is a shortline railroad that operates 25 miles (40 km) of former Erie Lackawanna Railroad trackage between Honesdale and Lackawaxen, Pennsylvania, where it connects with Norfolk Southern Railway. The line was previously owned by the Lackawaxen-Honesdale Shippers Association and operated under contract by Robey Railroads. The operation was contracted to the Morristown & Erie Railway in January, 2009; service ended in 2011. Service was resumed by the Delaware, Lackawaxen & Stourbridge Railroad (DL&S) on May 9, 2015.

The Leiper Railroad was a 'family business–built' horse drawn railroad of 0.75 miles (1.21 km), constructed in 1810 after the quarry owner, Thomas Leiper, failed to obtain a charter with legal rights-of-way to instead build his desired canal along Crum Creek. The quarry man's 'make-do' railroad was the continent's first chartered railway, first operational non-temporary railway, first well-documented railroad, and first constructed railroad also meant to be permanent.

The credit of constructing the first permanent tramway in America may therefore be rightly given to Thomas Leiper. He was the owner of a fine quarry not far from Philadelphia, and was much concerned to find an easy mode of carrying stone to tide-water. That a railway would accomplish this end he seem to have had no doubt. To test the matter, and at the same time afford a public exhibition of the merits of tramways, he built a temporary track in the yard of the Bull's Head Tavern in Philadelphia. The tramway was some sixty feet long, had a grade of one inch and a half to the yard, and up it, to the amazement of the spectators, one horse used to draw a four-wheeled wagon loaded with a weight of ten thousand pounds. This was the summer of 1809. Before autumn laborers were at work building a railway from the quarry to the nearest landing, a distance of three quarters of a mile. In the spring of 1810 the road began to be used and continued in using during eighteen years.
by John Bach McMaster, page 494, A History of the People of the United States, from the Revolution to the Civil War

<span class="mw-page-title-main">Lehigh Canal</span> United States historic place

The Lehigh Canal is a navigable canal that begins at the mouth of Nesquehoning Creek on the Lehigh River in the Lehigh Valley and Northeastern regions of Pennsylvania. It was built in two sections over a span of 20 years beginning in 1818. The lower section spanned the distance between Easton and present-day Jim Thorpe. In Easton, the canal met the Delaware and Morris Canals, which allowed anthracite coal and other goods to be transported further up the U.S. East Coast. At its height, the Lehigh Canal was 72 miles (116 km) long.

Pennsylvania State Senate District 40 includes parts of Lackawanna County and Wayne County and all of Monroe County. It is currently represented by Republican Rosemary Brown.

<span class="mw-page-title-main">Mauch Chunk Switchback Railway</span> Freight railroad in Pennsylvania

The Mauch Chunk Switchback Railway, also known as the Mauch Chunk and Summit Railroad and occasionally shortened to Mauch Chunk Railway, was a coal-hauling railroad in the mountains of Pennsylvania that was built in 1827 and operated until 1932. It was the second gravity railway constructed in the United States, which was used by the Lehigh Coal & Navigation Company to transport coal from Summit Hill downhill to the Lehigh canal.

<span class="mw-page-title-main">Lehigh Coal & Navigation Company</span> Defunct mining and transportation company

The Lehigh Coal & Navigation Company was a mining and transportation company headquartered in Mauch Chunk, Pennsylvania, in present-day Jim Thorpe, in Northeastern Pennsylvania. The company operated from 1818 until its dissolution in 1964 and played an early and influential role in the Industrial Revolution in the United States. The company ultimately encompassed source industries, transport, and manufacturing, making it the first vertically integrated U.S. company.

<span class="mw-page-title-main">James Archbald</span> American politician

James Archbald (1793–1870) was a Scottish-American railroad executive and politician. After immigrating to the United States with his family in 1805, he later was elected as Pennsylvania state representative and as the first mayor of Carbondale, Pennsylvania.

<span class="mw-page-title-main">Ashley Planes</span> United States historic place

Ashley Planes was a historic freight cable railroad situated along three separately powered inclined plane sections located between Ashley, Pennsylvania at the foot, and via the Solomon cutting the yard in Mountain Top over 1,000 feet (300 m) above and initially built between 1837 and 1838 by Lehigh Coal & Navigation Company's subsidiary Lehigh and Susquehanna Railroad (L&S).

Racket Brook is a tributary of the Lackawanna River in Wayne County and Lackawanna County, in Pennsylvania, in the United States. It is approximately 3.6 miles (5.8 km) long and flows through Canaan Township in Wayne County and Carbondale Township and Carbondale in Lackawanna County. The watershed of the stream has an area of 5.29 square miles (13.7 km2). The stream has no named tributaries, but has two unnamed tributaries. It is not designated as impaired, but it does experience minor flow loss. It drains part of the Moosic Mountains and also flows through a ravine known as the Brownell Ravine.

<span class="mw-page-title-main">Room Run Railroad</span>

The Room Run Railroad was an early American gravity railroad with self-acting planes. It was built by the Lehigh Coal and Navigation Company to transport coal from the Room Run Mine in Nesquehoning, Pennsylvania to landings at Mauch Chunk on the Lehigh River so it could be shipped on the Lehigh Canal to the Delaware River at Easton, Pennsylvania to markets in Philadelphia or New York City via the Delaware or Morris Canals.

References

Further reading