Energy density Extended Reference Table

Last updated

This is an extended version of the energy density table from the main Energy density page:

Energy densities table
Storage type Specific energy (MJ/kg)Energy density (MJ/L)Peak recovery efficiency  %Practical recovery efficiency %
Arbitrary Antimatter 89,875,517,874depends on density
Deuterium–tritium fusion 576,000,000 [1]
Uranium-235 fissile isotope144,000,000 [1] 1,500,000,000
Natural uranium (99.3% U-238, 0.7% U-235) in fast breeder reactor 86,000,000
Reactor-grade uranium (3.5% U-235) in light-water reactor 3,456,000 35%
Pu-238 α-decay2,200,000
Hf-178m2 isomer 1,326,00017,649,060
Natural uranium (0.7% U235) in light-water reactor 443,000 35%
Ta-180m isomer 41,340689,964
Metallic hydrogen (recombination energy)216 [2]
Specific orbital energy of Low Earth orbit (approximate)33.0
Beryllium + Oxygen 23.9 [3]
Lithium + Fluorine 23.75[ citation needed ]
Octaazacubane potential explosive22.9 [4]
Ammonia (NH3)16.911.5 [5] [ circular reference ]
Hydrogen + Oxygen 13.4 [6]
Gasoline + Oxygen –> Derived from Gasoline 13.3[ citation needed ]
Dinitroacetylene explosive - computed[ citation needed ]9.8
Octanitrocubane explosive8.5 [7] 16.9 [8]
Tetranitrotetrahedrane explosive - computed[ citation needed ]8.3
Heptanitrocubane explosive - computed[ citation needed ]8.2
Sodium (reacted with chlorine)[ citation needed ]7.0349
Hexanitrobenzene explosive7 [9]
Tetranitrocubane explosive - computed[ citation needed ]6.95
Ammonal (Al+NH4NO3 oxidizer)[ citation needed ]6.912.7
Tetranitromethane + hydrazine bipropellant - computed[ citation needed ]6.6
Nitroglycerin 6.38 [10] 10.2 [11]
ANFO-ANNM [ citation needed ]6.26
battery, Lithium–air 6.12
Octogen (HMX)5.7 [10] 10.8 [12]
TNT [Kinney, G.F.; K.J. Graham (1985). Explosive shocks in air. Springer-Verlag. ISBN   978-3-540-15147-0.][ citation needed ]4.6106.92
Copper Thermite (Al + CuO as oxidizer)[ citation needed ]4.1320.9
Thermite (powder Al + Fe2O3 as oxidizer)4.0018.4
Hydrogen peroxide decomposition (as monopropellant)2.73.8
battery, Lithium-ion nanowire 2.5495%[ clarification needed ] [13]
battery, Lithium Thionyl Chloride (LiSOCl2) [14] 2.5
Water 220.64 bar, 373.8 °C[ citation needed ][ clarification needed ]1.9680.708
Kinetic energy penetrator [ clarification needed ]1.930
battery, Fluoride-ion [ citation needed ]1.72.8
battery, Hydrogen closed cycle H fuel cell [15] 1.62
Hydrazine decomposition (as monopropellant)1.61.6
Ammonium nitrate decomposition (as monopropellant)1.42.5
Thermal Energy Capacity of Molten Salt 1[ citation needed ]98% [16]
Molecular spring approximate[ citation needed ]1
battery, Sodium–Sulfur 0.72 [17] 1.23[ citation needed ]85% [18]
battery, Lithium–Manganese [19] [20] 0.83-1.011.98-2.09
battery, Lithium-ion [21] [22] 0.46-0.720.83-3.6 [23] 95% [24]
battery, Lithium–Sulfur [25] 1.80 [26] 1.26
battery, Sodium–Nickel Chloride, High Temperature0.56
battery, Silver-oxide [19] 0.471.8
Flywheel 0.36-0.5 [27] [28]
5.56 × 45 mm NATO bullet[ clarification needed ]0.43.2
battery, Nickel–metal hydride (NiMH), low power design as used in consumer batteries [29] 0.41.55
battery, Zinc-manganese (alkaline), long life design [19] [21] 0.4-0.591.15-1.43
Liquid Nitrogen 0.349
Water - Enthalpy of Fusion 0.3340.334
battery, Zinc Bromine flow (ZnBr) [30] 0.27
battery, Nickel metal hydride (NiMH), High Power design as used in cars [31] 0.2500.493
battery, Nickel–Cadmium (NiCd) [21] 0.141.0880% [24]
battery, Zinc–Carbon [21] 0.130.331
battery, Lead–acid [21] 0.140.36
battery, Vanadium redox 0.09[ citation needed ]0.118870-75%
battery, Vanadium–Bromide redox 0.180.25280%–90% [32]
Capacitor Ultracapacitor 0.0199 [33] 0.050[ citation needed ]
Capacitor Supercapacitor 0.01[ citation needed ]80%–98.5% [34] 39%–70% [34]
Superconducting magnetic energy storage 0.008 [35] >95%
Capacitor 0.002 [36]
Neodymium magnet 0.003 [37]
Ferrite magnet 0.0003 [37]
Spring power (clock spring), torsion spring 0.0003 [38] 0.0006
Storage typeEnergy density by mass (MJ/kg)Energy density by volume (MJ/L)Peak recovery efficiency %Practical recovery efficiency %

Notes

  1. 1 2 Prelas, Mark (2015). Nuclear-Pumped Lasers. Springer. p. 135. ISBN   9783319198453.
  2. ↑ http://iopscience.iop.org/1742-6596/215/1/012194/pdf/1742-6596_215_1_012194.pdf [ bare URL PDF ]
  3. ↑ Cosgrove, Lee A.; Snyder, Paul E. (2002-05-01). "The Heat of Formation of Beryllium Oxide1". Journal of the American Chemical Society. 75 (13): 3102–3103. doi:10.1021/ja01109a018.
  4. ↑ Glukhovtsev, Mikhail N.; Jiao, Haijun; Schleyer, Paul von Ragué (1996-05-28). "Besides N2, What Is the Most Stable Molecule Composed Only of Nitrogen Atoms?†". Inorganic Chemistry. 35 (24): 7124–7133. doi:10.1021/ic9606237. PMID   11666896.
  5. ↑ Ammonia#Combustion
  6. ↑ Miller, Catherine (1 February 2021). "Introduction to Rocket Propulsion" (PDF). Retrieved 9 May 2021.
  7. ↑ Wiley Interscience
  8. ↑ Octanitrocubane
  9. ↑ Wiley Interscience
  10. 1 2 "Chemical Explosives". Fas.org. 2008-05-30. Retrieved 2010-05-07.
  11. ↑ Nitroglycerin
  12. ↑ HMX
  13. ↑ "Nanowire battery can hold 10 times the charge of existing lithium-ion battery". News-service.stanford.edu. 2007-12-18. Retrieved 2010-05-07.
  14. ↑ "Lithium Thionyl Chloride Batteries". Nexergy. Archived from the original on 2009-02-04. Retrieved 2010-05-07.
  15. ↑ "The Unitized Regenerative Fuel Cell". Llnl.gov. 1994-12-01. Archived from the original on 2008-09-20. Retrieved 2010-05-07.
  16. ↑ "Technology". SolarReserve. Archived from the original on 2008-01-19. Retrieved 2010-05-07.
  17. ↑ "New battery could change world, one house at a time". Heraldextra.com. 2009-04-04. Archived from the original on 2015-10-17. Retrieved 2010-05-07.
  18. ↑ Kita, A.; Misaki, H.; Nomura, E.; Okada, K. (August 1984). "Energy Citations Database (ECD) - - Document #5960185". Proc., Intersoc. Energy Convers. Eng. Conf.; (United States). Osti.gov. 2. OSTI   5960185.
  19. 1 2 3 "ProCell Lithium battery chemistry". Duracell. Archived from the original on 2011-07-10. Retrieved 2009-04-21.
  20. ↑ "Properties of non-rechargeable lithium batteries". corrosion-doctors.org. Retrieved 2009-04-21.
  21. 1 2 3 4 5 "Battery energy storage in various battery types". AllAboutBatteries.com. Archived from the original on 2009-04-28. Retrieved 2009-04-21.
  22. ↑ A typically available lithium-ion cell with an Energy Density of 201 wh/kg "Li-Ion 18650 Cylindrical Cell 3.6V 2600mAh - Highest Energy Density Cell in Market (LC-18650H4) - LC-18650H4". Archived from the original on 2008-12-01. Retrieved 2012-12-14.
  23. ↑ "Lithium Batteries". Archived from the original on 2011-08-08. Retrieved 2010-07-02.
  24. 1 2 Justin Lemire-Elmore (2004-04-13). "The Energy Cost of Electric and Human-Powered Bicycles" (PDF). p. 7. Archived from the original (PDF) on 2012-09-13. Retrieved 2009-02-26. Table 3: Input and Output Energy from Batteries
  25. ↑ "Lithium Sulfur Rechargeable Battery Data Sheet" (PDF). Sion Power, Inc. 2005-09-28. Archived from the original (PDF) on 2008-08-28.
  26. ↑ Kolosnitsyn, V.S.; E.V. Karaseva (2008). "Lithium-sulfur batteries: Problems and solutions". Russian Journal of Electrochemistry. 44 (5): 506–509. doi:10.1134/s1023193508050029. S2CID   97022927.
  27. ↑ "Storage Technology Report, ST6 Flywheel" (PDF). Archived from the original (PDF) on 2013-01-14. Retrieved 2012-12-14.
  28. ↑ "Next-gen Of Flywheel Energy Storage". Product Design & Development. Archived from the original on 2010-07-10. Retrieved 2009-05-21.
  29. ↑ "Advanced Materials for Next Generation NiMH Batteries, Ovonic, 2008" (PDF). Archived from the original (PDF) on 2010-01-04. Retrieved 2012-12-14.
  30. ↑ "ZBB Energy Corp". Archived from the original on 2007-10-15. 75 to 85 watt-hours per kilogram
  31. ↑ High Energy Metal Hydride Battery Archived 2009-09-30 at the Wayback Machine
  32. ↑ "Microsoft Word - V-FUEL COMPANY AND TECHNOLOGY SHEET 2008.doc" (PDF). Archived from the original (PDF) on 2010-11-22. Retrieved 2010-05-07.
  33. ↑ "Maxwell Technologies: Ultracapacitors - BCAP3000". Maxwell.com. Retrieved 2010-05-07.
  34. 1 2 "Archived copy" (PDF). Archived from the original (PDF) on 2012-07-22. Retrieved 2012-12-14.{{cite web}}: CS1 maint: archived copy as title (link)
  35. ↑ Archived February 16, 2010, at the Wayback Machine
  36. ↑ "Department of Computing". Archived from the original on 2006-10-06. Retrieved 2012-12-14.
  37. 1 2 "Archived copy" (PDF). Archived from the original (PDF) on 2011-05-13. Retrieved 2012-12-14.{{cite web}}: CS1 maint: archived copy as title (link)
  38. ↑ "Garage Door Springs". Garagedoor.org. Retrieved 2010-05-07.

Related Research Articles

<span class="mw-page-title-main">Hybrid vehicle</span> Vehicle using two or more power sources

A hybrid vehicle is one that uses two or more distinct types of power, such as submarines that use diesel when surfaced and batteries when submerged. Other means to store energy include pressurized fluid in hydraulic hybrids.

<span class="mw-page-title-main">Lithium-ion battery</span> Rechargeable battery type

A lithium-ion or Li-ion battery is a type of rechargeable battery that uses the reversible intercalation of Li+ ions into electronically conducting solids to store energy. In comparison with other commercial rechargeable batteries, Li-ion batteries are characterized by higher specific energy, higher energy density, higher energy efficiency, a longer cycle life, and a longer calendar life. Also noteworthy is a dramatic improvement in lithium-ion battery properties after their market introduction in 1991: within the next 30 years, their volumetric energy density increased threefold while their cost dropped tenfold.

<span class="mw-page-title-main">Rechargeable battery</span> Type of electrical battery

A rechargeable battery, storage battery, or secondary cell, is a type of electrical battery which can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. It is composed of one or more electrochemical cells. The term "accumulator" is used as it accumulates and stores energy through a reversible electrochemical reaction. Rechargeable batteries are produced in many different shapes and sizes, ranging from button cells to megawatt systems connected to stabilize an electrical distribution network. Several different combinations of electrode materials and electrolytes are used, including lead–acid, zinc–air, nickel–cadmium (NiCd), nickel–metal hydride (NiMH), lithium-ion (Li-ion), lithium iron phosphate (LiFePO4), and lithium-ion polymer.

<span class="mw-page-title-main">Sodium–sulfur battery</span> Type of molten-salt battery

A sodium–sulfur (NaS) battery is a type of molten-salt battery that uses liquid sodium and liquid sulfur electrodes. This type of battery has a similar energy density to lithium-ion batteries, and is fabricated from inexpensive and non-toxic materials. However, due to the high operating temperature required, as well as the highly corrosive and reactive nature of sodium and sodium polysulfides, these batteries are primarily suited for stationary energy storage applications, rather than for use in vehicles. Molten Na-S batteries are scalable in size: there is a 1 MW microgrid support system on Catalina Island CA (USA) and a 50 MW/300 MWh system in Fukuoka, Kyusyu, (Japan).

In physics, energy density is the amount of energy stored in a given system or region of space per unit volume. It is sometimes confused with energy per unit mass which is properly called specific energy or gravimetric energy density.

<span class="mw-page-title-main">Lithium metal battery</span> Non-rechargeable battery using lithium metal as anode

Lithium metal batteries are primary batteries that have metallic lithium as an anode. The name intentionally refers to the metal to as to distinguish them from lithium-ion batteries, which use lithiated metal oxides as the cathode material. Although most lithium metal batteries are non-rechargeable, rechargeable lithium metal batteries are also under development. Since 2007, Dangerous Goods Regulations differentiate between lithium metal batteries and lithium-ion batteries.

<span class="mw-page-title-main">Molten-salt battery</span> Type of battery that uses molten salts

Molten-salt batteries are a class of battery that uses molten salts as an electrolyte and offers both a high energy density and a high power density. Traditional non-rechargeable thermal batteries can be stored in their solid state at room temperature for long periods of time before being activated by heating. Rechargeable liquid-metal batteries are used for industrial power backup, special electric vehicles and for grid energy storage, to balance out intermittent renewable power sources such as solar panels and wind turbines.

A hybrid train is a locomotive, railcar or train that uses an onboard rechargeable energy storage system (RESS), placed between the power source and the traction transmission system connected to the wheels. Since most diesel locomotives are diesel-electric, they have all the components of a series hybrid transmission except the storage battery, making this a relatively simple prospect.

<span class="mw-page-title-main">Lithium iron phosphate battery</span> Type of rechargeable battery

The lithium iron phosphate battery or LFP battery is a type of lithium-ion battery using lithium iron phosphate as the cathode material, and a graphitic carbon electrode with a metallic backing as the anode. Because of their low cost, high safety, low toxicity, long cycle life and other factors, LFP batteries are finding a number of roles in vehicle use, utility-scale stationary applications, and backup power. LFP batteries are cobalt-free. As of September 2022, LFP type battery market share for EVs reached 31%, and of that, 68% was from Tesla and Chinese EV maker BYD production alone. Chinese manufacturers currently hold a near monopoly of LFP battery type production. With patents having started to expire in 2022 and the increased demand for cheaper EV batteries, LFP type production is expected to rise further and surpass lithium nickel manganese cobalt oxides (NMC) type batteries in 2028.

<span class="mw-page-title-main">Nanobatteries</span> Type of battery

Nanobatteries are fabricated batteries employing technology at the nanoscale, particles that measure less than 100 nanometers or 10−7 meters. These batteries may be nano in size or may use nanotechnology in a macro scale battery. Nanoscale batteries can be combined to function as a macrobattery such as within a nanopore battery.

<span class="mw-page-title-main">Electric vehicle battery</span> Battery used to power the electric motors of a battery electric vehicle or hybrid electric vehicle

An electric vehicle battery is a rechargeable battery used to power the electric motors of a battery electric vehicle (BEV) or hybrid electric vehicle (HEV).

The lithium-titanate or lithium-titanium-oxide (LTO) battery is a type of rechargeable battery which has the advantage of being faster to charge than other lithium-ion batteries but the disadvantage of having a much lower energy density.

<span class="mw-page-title-main">Lithium–sulfur battery</span> Type of rechargeable battery

The lithium–sulfur battery is a type of rechargeable battery. It is notable for its high specific energy. The low atomic weight of lithium and moderate atomic weight of sulfur means that Li–S batteries are relatively light. They were used on the longest and highest-altitude unmanned solar-powered aeroplane flight by Zephyr 6 in August 2008.

<span class="mw-page-title-main">Solid-state battery</span> Battery with solid electrodes and a solid electrolyte

A solid-state battery uses solid electrodes and a solid electrolyte, instead of the liquid or polymer gel electrolytes found in lithium-ion or lithium polymer batteries.

<span class="mw-page-title-main">Patent encumbrance of large automotive NiMH batteries</span> Conspiracy theory

The patent encumbrance of large automotive NiMH batteries refers to allegations that corporate interests have used the patent system to prevent the commercialization of nickel metal hydride (NiMH) battery technology. Nickel metal hydride battery technology was considered important to the development of battery electric vehicles, plug-in hybrid electric vehicles (PHEVs) and hybrid electric vehicles (HEVs) before the technology for lithium-ion battery packs became a viable replacement.

A metal–air electrochemical cell is an electrochemical cell that uses an anode made from pure metal and an external cathode of ambient air, typically with an aqueous or aprotic electrolyte.

<span class="mw-page-title-main">Sodium-ion battery</span> Type of rechargeable battery

Sodium-ion batteries (NIBs, SIBs, or Na-ion batteries) are several types of rechargeable batteries, which use sodium ions (Na+) as its charge carriers. In some cases, its working principle and cell construction are similar to those of lithium-ion battery (LIB) types, but it replaces lithium with sodium as the intercalating ion. Sodium belongs to the same group in the periodic table as lithium and thus has similar chemical properties. Although, in some cases (such as aqueous Na-ion batteries) they are quite different from Li-ion batteries.

This is a list of commercially-available battery types summarizing some of their characteristics for ready comparison.

Linda Faye Nazar is a Senior Canada Research Chair in Solid State Materials and Distinguished Research Professor of Chemistry at the University of Waterloo. She develops materials for electrochemical energy storage and conversion. Nazar demonstrated that interwoven composites could be used to improve the energy density of lithium–sulphur batteries. She was awarded the 2019 Chemical Institute of Canada Medal.

<span class="mw-page-title-main">Lithium nickel manganese cobalt oxides</span> Lithium ion battery cathode material

Lithium nickel manganese cobalt oxides (abbreviated NMC, Li-NMC, LNMC, or NCM) are mixed metal oxides of lithium, nickel, manganese and cobalt with the general formula LiNixMnyCo1-x-yO2. These materials are commonly used in lithium-ion batteries for mobile devices and electric vehicles, acting as the positively charged cathode.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.