Franklin stove

Last updated
A Franklin stove Franklin stove.jpg
A Franklin stove

The Franklin stove is a metal-lined fireplace named after Benjamin Franklin, who invented it in 1742. [1] It had a hollow baffle near the rear (to transfer more heat from the fire to a room's air) and relied on an "inverted siphon" to draw the fire's hot fumes around the baffle. [2] It was intended to produce more heat and less smoke than an ordinary open fireplace, but it achieved few sales until it was improved by David Rittenhouse. It is also known as a "circulating stove" or the "Pennsylvania fireplace".

Contents

History

The two distinguishing features of Franklin's stove were a hollow baffle (a metal panel that directed the flow of the fire's fumes) and a flue that acted as an upside-down siphon.

The Franklin stove. Cool air enters the baffle through a duct under the floor. Smoke exits through a U-shaped duct in the floor. Franklin stove, cross-sectional diagram.jpg
The Franklin stove. Cool air enters the baffle through a duct under the floor. Smoke exits through a U-shaped duct in the floor.

Baffles in fireplaces

Baffles were used to lengthen the path that either a room's air or a fire's fumes had to flow through ductwork, thereby allowing more heat to be transferred to the room's air temperatures or from the fire's fumes. Specifically, ducts could be installed within the brickwork around a hearth; cool room air would then enter the lower end of a duct, be heated by the hot walls of the duct, rise, and finally exit from the duct's upper end, and return to the room. The longer the path through which the air flowed, the more heat would be transferred from the fire to the air. Similarly, the longer the duct through which a fire's fumes had to flow before reaching the chimney, the more heat would be transferred from the fumes to the room's air.

The use of baffles to extract more heat from a fire and its fumes was not new. In 1618, Franz Kessler (c. 1580–1650) of Frankfurt-am-Main, Germany published Holzsparkunst (The Art of Saving Wood), featuring a stove in which the fumes from a fire were forced to snake through five chambers, one above the other, before entering the chimney. [3] Kessler also documented an enclosed heating stove that, like Franklin's stove, had a baffle directly behind the fire, thereby lengthening the path that the fire's fumes had to travel before reaching the chimney. [4]

In 1624, a French physician, Louis Savot (1579–1640), described a fireplace that he had built in the Louvre. Ducts passed under, behind, and above the fire in the hearth. Cool air in the room entered the lower opening of a duct, was warmed, rose, and returned to the room through the duct's upper opening. [5] In 1713, Frenchman Nicolas Gauger (c. 1680–1730) published a book, La Mécanique du Feu (The Mechanics of Fire), in which he presented novel designs for fireplaces. Gauger surrounded the hearth with hollow spaces. Inside these spaces were baffles. Cool room air entered the spaces through lower openings, was warmed as it snaked around the baffles in the spaces, and returned to the room through upper openings. [6]

In Franklin's stove, a hollow baffle was positioned inside and near the rear of the stove. The baffle was a wide but thin cast-iron box, which was open to the room's air at its bottom and two holes on its sides, near its top. Air entered the bottom of the box and was heated both by the fire and by the fumes flowing over the front and back of the box. The warmed air then rose inside the baffle and exited through the holes in the baffle's sides. [7] Franklin's baffle thus performed at least two functions: like Kessler's heating stove, it lengthened the path that the fire's fumes had to follow before reaching the chimney, allowing more heat to be extracted from the fumes; and like Gauger's fireplace, it placed a duct near the fire, which heated the room's air via convection.

Inverted siphons in fireplaces

Some early experimenters reasoned that if a fire in a fireplace were connected by a U-shaped duct to the chimney, the hot gases ascending through the chimney would draw the fire's smoke and fumes first downwards through one leg of the U and then upwards through the other leg and the chimney. This was what Franklin called an "aerial syphon" or "syphon revers'd". [8] This inverted siphon was used to draw the fire's hot fumes up the front and down the back of the Franklin stove's hollow baffle, in order to extract as much heat as possible from the fumes.

The earliest known example of such an inverted siphon was the 1618 fireplace of Franz Kessler. [9] The fire burned in a ceramic box. Inside the box and behind the fire was a baffle. The baffle forced the fire's fumes to descend behind the baffle before exiting to the chimney. The intention was to extract as much heat as possible from the fumes by extending the path that the fumes had to follow before they reached the chimney.

The 1678 fireplace of Prince Rupert (1619–1682) also included an inverted siphon. Rupert placed a hanging iron door between the fire grate and the chimney. In order to exit through the chimney, the fire's fumes and smoke first had to descend below the edge of the door before rising through the chimney. [10]

Another early example of an inverted siphon was a stove that was exhibited in 1686 at the annual Foire Saint-Germain, Paris. Its inventor, André Dalesme (1643–1727), called it a smokeless stove (furnus acapnos). The stove consisted of an iron bowl in which the fuel was burned. A pipe extended from the bowl's bottom and then upwards into a chimney. Shortly after starting a fire in the bowl, hot air would begin to rise through the pipe and then up the chimney; this created a downward draft through the bowl, which drew the fire and its fumes down into the bowl. Once the draft was initiated, it was self-sustaining as long as the fire burned. [11] Dalesme's stove could burn wood, incense, and even "coal steept in cats-piss" yet produce very little smoke or smell. [12] [13] These results showed that fires could be used inside a room, without filling the house with smoke.

Franklin's stove contained a baffle directly behind the fire, which forced the fire's fumes to flow downward before they reached the chimney. This required a U-shaped duct in the floor behind the stove, so that the fumes could flow from the stove into the chimney. Thus Franklin's stove incorporated an inverted siphon.

Franklin's research and development

Gauger's book on his innovative fireplace designs was translated into English – Fires Improv'd: Being a New Method of Building Chimneys, So as to Prevent their Smoaking (1715) – by a French immigrant to England, Jean Théophile Desaguliers (1683–1744). In a postscript to Desaguliers' book A Course in Experimental Philosophy (1744), Desaguliers again briefly described Gauger's fireplaces and mentioned his own work on the subject. [14] Franklin read both of Desaguliers' books [15] and developed his own designs for a stove that could provide more heat with less smoke.

In 1742, Franklin finished his first design which implemented new scientific concepts about heat which had been developed by the Dutch physician Herman Boerhaave (1668–1738), a proponent of Isaac Newton's ideas. [16] He supplied his equipment from a local iron pioneer William Branson from Reading, PA. [17] Franklin wanted his stoves to be available to everyone, relishing popular appreciation of his handiwork and eschewing patents.[ citation needed ] This combination of events led to the first Franklin stoves being manufactured by Reading furnaces, which was owned by the local Van Leer family. [18] [19] [20] Two years later, Franklin wrote a pamphlet describing his design and how it operated in order to sell his product. [21] Around this time, the deputy governor of Pennsylvania, George Thomas, made an offer to Franklin to patent his design, but Franklin never patented any of his designs and inventions. He believed "that as we enjoy great advantages from the inventions of others, we should be glad of an opportunity to serve others by any invention of ours, and this we should do freely and generously". [22] As a result, many others were able to use Franklin's design and improve it. Although his stove was intended to have the double purpose of cooking and heating a room, as time progressed and new stove designs became available, the Franklin stove's main use became to heat a room. Many others improved on the Franklin stove design, but to this day, most American fireplaces are box-shaped, similar to the Franklin stove. The exception is the Rumford fireplace, developed by Benjamin Thompson.

Stove design

The stove was about 30 inches (76 cm) tall, with a box shape. The front was open, except for a decorative panel in the upper part of the box. The back of the box was to be placed a few inches away from the flue (chimney). On the bottom panel there were several holes to allow the smoke to escape; these were connected to the chimney. The panels were bolted together with iron screws through pre-cast ears. [23] Inside there was a small, thin rectangular prism that would force the smoke into the holes. The plates were all made from iron.[ citation needed ]

Franklin's stove sold poorly. [24] The problem lay with the inverted siphon: the smoke had to pass through a cold flue (which was set in the floor) before the smoke could enter the chimney; consequently, the smoke cooled too much and the stove did not have a good draft. [25] The inverted siphon would operate properly only if the fire burned constantly, so that the temperature in the flue was high enough to produce a draft.

A later version, designed by David Rittenhouse, solved many of the problems Franklin's original stove had, and became popular. Franklin's fame outweighed Rittenhouse's, though, so history remembers the Franklin Stove rather than the Rittenhouse Stove. [26] The smaller Latrobe stove, often referred to as a Baltimore Heater, was patented in 1846 and became popular.

See also

Related Research Articles

<span class="mw-page-title-main">Hearth</span> Place for a fire to heat the home and to cook food, usually of masonry

A hearth is the place in a home where a fire is or was traditionally kept for home heating and for cooking, usually constituted by at least a horizontal hearthstone and often enclosed to varying degrees by any combination of reredos, fireplace, oven, smoke hood, or chimney. Hearths are usually composed of masonry such as brick or stone. For centuries, the hearth was such an integral part of a home, usually its central and most important feature, that the concept has been generalized to refer to a homeplace or household, as in the terms "hearth and home" and "keep the home fires burning". In the modern era, since the advent of central heating, hearths are usually less central to most people's daily life because the heating of the home is instead done by a furnace or a heating stove, and cooking is instead done with a kitchen stove/range alongside other home appliances; thus many homes built in the 20th and 21st centuries do not have hearths. Nonetheless, many homes still have hearths, which still help serve the purposes of warmth, cooking, and comfort.

<span class="mw-page-title-main">Benjamin Thompson</span> American-born British physicist and inventor

Sir Benjamin Thompson, Count Rumford, FRS was a British physicist, born in Colonial Massachusetts, and inventor whose challenges to established physical theory were part of the 19th-century revolution in thermodynamics. He served as lieutenant-colonel of the King's American Dragoons, part of the British Loyalist forces, during the American Revolutionary War. After the end of the war he moved to London, where his administrative talents were recognized when he was appointed a full colonel, and in 1784 he received a knighthood from King George III. A prolific designer, Thompson also drew designs for warships. He later moved to Bavaria and entered government service there, being appointed Bavarian Army Minister and re-organizing the army, and, in 1792, was made a Count of the Holy Roman Empire.

A chimney is an architectural ventilation structure made of masonry, clay or metal that isolates hot toxic exhaust gases or smoke produced by a boiler, stove, furnace, incinerator, or fireplace from human living areas. Chimneys are typically vertical, or as near as possible to vertical, to ensure that the gases flow smoothly, drawing air into the combustion in what is known as the stack, or chimney effect. The space inside a chimney is called the flue. Chimneys are adjacent to large industrial refineries, fossil fuel combustion facilities or part of buildings, steam locomotives and ships.

<span class="mw-page-title-main">Brazier</span> Container used to burn charcoal or other solid fuel

A brazier is a container used to burn charcoal or other solid fuel for cooking, heating or cultural rituals. It often takes the form of a metal box or bowl with feet. Its elevation helps circulate air, feeding oxygen to the fire. Braziers have been used since ancient times; the Nimrud brazier dates to at least 824 BC.

<span class="mw-page-title-main">Stove</span> Device used to generate heat or to cook

A stove or range is a device that generates heat inside or on top of the device, for local heating or cooking. Stoves can be powered with many fuels, such as electricity, natural gas, gasoline, wood, and coal.

<span class="mw-page-title-main">Wood fuel</span> Wood used as fuel for combustion

Wood fuel is a fuel such as firewood, charcoal, chips, sheets, pellets, and sawdust. The particular form used depends upon factors such as source, quantity, quality and application. In many areas, wood is the most easily available form of fuel, requiring no tools in the case of picking up dead wood, or few tools, although as in any industry, specialized tools, such as skidders and hydraulic wood splitters, have been developed to mechanize production. Sawmill waste and construction industry by-products also include various forms of lumber tailings.

<span class="mw-page-title-main">Kitchen stove</span> Kitchen appliance designed for the purpose of cooking food

A kitchen stove, often called simply a stove or a cooker, is a kitchen appliance designed for the purpose of cooking food. Kitchen stoves rely on the application of direct heat for the cooking process and may also contain an oven, used for baking. "Cookstoves" are heated by burning wood or charcoal; "gas stoves" are heated by gas; and "electric stoves" by electricity. A stove with a built-in cooktop is also called a range.

<span class="mw-page-title-main">Central heating</span> Type of heating system

A central heating system provides warmth to a number of spaces within a building from one main source of heat. It is a component of heating, ventilation, and air conditioning systems, which can both cool and warm interior spaces.

<span class="mw-page-title-main">Kitchen hood</span> Type of home appliance that clears smoke from a stove

A kitchen hood, exhaust hood, hood fan, extractor hood, or range hood is a device containing a mechanical fan that hangs above the stove or cooktop in the kitchen. It removes airborne grease, combustion products, fumes, smoke, heat, and steam from the air by evacuation of the air and filtration. In commercial kitchens exhaust hoods are often used in combination with fire suppression devices so that fumes from a grease fire are properly vented and the fire is put out quickly. Commercial vent hoods may also be combined with a fresh air fan that draws in exterior air, circulating it with the cooking fumes, which is then drawn out by the hood.

<span class="mw-page-title-main">Fireplace</span> Device for firing solid fuels in buildings

A fireplace or hearth is a structure made of brick, stone or metal designed to contain a fire. Fireplaces are used for the relaxing ambiance they create and for heating a room. Modern fireplaces vary in heat efficiency, depending on the design.

<span class="mw-page-title-main">Rumford fireplace</span> Fireplace designed by Benjamin Thompson

The Rumford fireplace is a tall, shallow fireplace designed by Sir Benjamin Thompson, Count Rumford, an Anglo-American physicist best known for his investigations of heat. Its shallow, angled sides are designed to reflect heat into the room, and its streamlined throat minimizes turbulence, thereby carrying away smoke with little loss of heated room air.

<i>Ondol</i> Traditional Korean underfloor heating system

Ondol or gudeul in Korean traditional architecture is underfloor heating that uses direct heat transfer from wood smoke to heat the underside of a thick masonry floor. In modern usage it refers to any type of underfloor heating, or to a hotel or a sleeping room in Korean style.

<span class="mw-page-title-main">Damper (flow)</span> Valve or plate for regulating airflow inside a duct, chimney, vent, etc.

A damper is a valve or plate that stops or regulates the flow of air inside a duct, chimney, VAV box, air handler, or other air-handling equipment. A damper may be used to cut off central air conditioning to an unused room, or to regulate it for room-by-room temperature and climate control - for example, in the case of Volume Control Dampers. Its operation can be manual or automatic. Manual dampers are turned by a handle on the outside of a duct. Automatic dampers are used to regulate airflow constantly and are operated by electric or pneumatic motors, in turn controlled by a thermostat or building automation system. Automatic or motorized dampers may also be controlled by a solenoid, and the degree of air-flow calibrated, perhaps according to signals from the thermostat going to the actuator of the damper in order to modulate the flow of air-conditioned air in order to effect climate control.

<span class="mw-page-title-main">Flue</span> Exhaust for a fireplace, furnace etc

A flue is a duct, pipe, or opening in a chimney for conveying exhaust gases from a fireplace, furnace, water heater, boiler, or generator to the outdoors. Historically the term flue meant the chimney itself. In the United States, they are also known as vents for boilers and as breeching for water heaters and modern furnaces. They usually operate by buoyancy, also known as the stack effect, or the combustion products may be 'induced' via a blower. As combustion products contain carbon monoxide and other dangerous compounds, proper 'draft', and admission of replacement air is imperative. Building codes, and other standards, regulate their materials, design, and installation.

<span class="mw-page-title-main">Masonry heater</span> Heating device

A masonry heater is a device for warming an interior space through radiant heating, by capturing the heat from periodic burning of fuel, and then radiating the heat at a fairly constant temperature for a long period. Masonry heaters covered in tile are called cocklestoves. The technology has existed in different forms, from back into the Neoglacial and Neolithic periods. Archaeological digs have revealed excavations of ancient inhabitants utilizing hot smoke from fires in their subterranean dwellings, to radiate into the living spaces. These early forms have evolved into modern systems.

<span class="mw-page-title-main">Convection heater</span> Type of heating device

A convection heater is a type of heater that uses convection currents to heat and circulate air. These air currents flow throughout the body of the appliance and across its heating element. This process takes advantage of thermal conduction in order to heat the air, reducing its density relative to colder air and causing it to rise.

<span class="mw-page-title-main">Electric fireplace</span> Electric heater that mimics a fireplace

An electric fireplace is an electric heater that mimics a fireplace burning coal, wood, or natural gas. Electric fireplaces are often placed in conventional fireplaces, which can then no longer be used for conventional fires. They plug into the wall, and can run on a "flame only" setting, or can be used as a heater, typically consuming 1.4 to 1.6 kW to heat a 40 m2 room.

<span class="mw-page-title-main">Wood-burning stove</span> Type of stove

A wood-burning stove is a heating or cooking appliance capable of burning wood fuel, often called solid fuel, and wood-derived biomass fuel, such as sawdust bricks. Generally the appliance consists of a solid metal closed firebox, often lined by fire brick, and one or more air controls. The first wood-burning stove was patented in Strasbourg in 1557. This was two centuries before the Industrial Revolution, so iron was still prohibitively expensive. The first wood-burning stoves were high-end consumer items and only gradually became used widely.

<span class="mw-page-title-main">Rocket mass heater</span> Type of heating system

A rocket mass heater (RMH), also known as rocket stove mass heater, is a form of slow-release radiant heating system, designed to primarily heat people and secondarily to warm areas in line of sight around it. Variations of RMH can also be extended for the functions of cooking, heating water, and producing warm air for distribution.

References

  1. ↑ L.W. Labaree, W. Bell, W.B. Willcox, et al., eds., The Papers of Benjamin Franklin (New Haven, Connecticut: Yale University Press, 1959–1986), vol. 2, page 419.
  2. ↑ Samuel Y. Edgerton, Jr., "Supplement: The Franklin Stove" in I. Bernard Cohen, Benjamin Franklin's Science (Cambridge, Massachusetts: Harvard University Press, 1990), pages 204–206.
  3. ↑ Franz Kessler, Holzsparkunst [The Art of Saving Wood] (Frankfurt am Main, (Germany): Anthoni Hummen, 1618), pages 72 and 80.
    Reprinted in French as: François Keslar, Épargne bois, c'est à dire, nouvelle et par ci-devant non commune, ni mise en lumiere, invention de certains et divers fourneaux artificiels, etc.... [Wood Saver, that is, the new and hitherto neither commonplace nor well-known invention of some and various fireplaces, etc....] (Oppenheim, Germany: Jean-Théodore de Bry, 1619).
  4. ↑ Kessler, 1618; page 69, figure 25.
  5. ↑ Louis Savot, L'Architecture Françoise des Bastimens particuliers [The French Architecture of Private Houses] (1642 ed.) (Paris, France: Sébastien Cramoisy, 1624), Chapter 25 (pages 147–151). Cited in: Tomlinson (1864), pages 82–83.
  6. ↑ Nicolas Gauger, La Mécanique du Feu... (Paris, France: 1713). Cited in: Tomlinson (1864), pages 88–94; see especially page 92.
  7. ↑ Edgerton (1990), page 206
  8. ↑ Edgerton (1990), page 204.
  9. ↑ Franz Kessler, Holzsparkunst [The Art of Saving Wood] (Frankfurt am Main, (Germany): Anthoni Hummen, 1618), page 69, figure 25; the heater is described on page 59. Kessler's illustration of an inverted siphon is reproduced in: Figure CLIV on page 177 of Walter Bernan, On the History and Art of Warming and Ventilating Rooms and Buildings... (London, England: George Bell, 1845), volume 2.
  10. ↑ Charles Tomlinson, A Rudimentary Treatise on Warming and Ventilation ... , 3rd ed. (London, England: Virtue Brothers & Co., 1864), pages 85–86.
  11. ↑ See:
    1. Tomlinson (1864), pages 86–87.
    2. John Pickering Putnam, The Open Fire-place in All Ages (Boston, Massachusetts: James R. Osgood and Co., 1881), pages 38–39.
    3. "Mr. Justell" (Henri Justel) (10 March 1686) "An account of an engine that consumes smoak, shown lately at St. Germans fair in Paris," Philosophical Transactions of the Royal Society of London, vol. 16, page 78.
    4. Anon. (1686) "Machine qui consume la fumée, de l'invention du Sieur Dalesme" (Machine which consumes smoke, on the invention of Mr. Dalesme), Journal des Savants, vol. 14, pages 116–119.
    5. Herman Boerhaave, Elementa chemiae (The Elements of Chemistry), 2nd ed. (Paris, France: Guillaume Cavelier, 1733), vol. 1, pages 163–164 and illustrations on preceding plate (in Latin).
    6. Franklin (1786), page 57.
  12. ↑ Justel (1686), page 78.
  13. ↑ A German, Johann Georg Leutmann, claimed to have invented Dalesme's stove earlier; however, Leutmann's design appears to be unworkable. See:
    • Putnam (1881), page 39.
    • Johann Georg Leutmann, Vulcanus Famulans oder Sonderbahre Feuer-Nutzung... (Würtemberg, Germany: Zimmermann, 1720). In the 1755 (4th) edition of Leutmann's book, see page 62 (Von den unter sich treibenden Trag-Ofen (On the portable heater that drives [smoke] downwards)) and the illustration on page 169, Fig. 2.
    • Franklin (1786), pages 58–60.
    • The Franklin Stove: "A Classic Invention", The Science News-Letter. Vol. 20, No. 548 (Oct. 10, 1931). p. 230.
  14. ↑ J.T. Desaguliers, A Course of Experimental Philosophy, vol. 2 (London, England: 1744), pages 556–561.
  15. ↑ Edgerton (1990), page 203.
  16. ↑ Edgerton (1990), page 201.
  17. ↑ Jordan, J. A. Lemay (1962). The Life of Benjamin Franklin, Volume 2: Printer and Publisher, 1730-1747. University of Pennsylvania Press. pp. 468–470. ISBN   9780806352398.
  18. ↑ Jordan, J. A. Lemay (1962). The Life of Benjamin Franklin, Volume 2: Printer and Publisher, 1730-1747. University of Pennsylvania Press. pp. 468–470. ISBN   9780806352398.
  19. ↑ Snyder, Michael T. (March 3, 2003). "Chronicles the Coventries- Local author/historian looks North, East and South". The Mercury News .
  20. ↑ Jordan, John Woolf (1962). "Mother's an Engineer". Historical Society of Pennsylvania. pp. 1322–1325. ISBN   9780806352398.
  21. ↑ Franklin, Benjamin, An Account of the new Invented Pennsylvanian Fire-Places. Philadelphia, Franklin, 1744. pp. 1–42 https://founders.archives.gov/documents/Franklin/01-02-02-0114
  22. ↑ Seeger, Raymond John, and Benjamin Franklin. Benjamin Franklin, New World Physicist, Oxford: Pergamon, 1973. ISBN   0-08-017648-8 p. 159
  23. ↑ Cohen, I. Bernard, and Samuel Y. Edgerton, Jr. Benjamin Franklin's Science. Cambridge, MA: Harvard UP, 1996. ISBN   0-674-06659-6 pp. 205–206.
  24. ↑ Edgerton (1990), pages 207-208.
  25. ↑ Edgerton (1990), page 209.
  26. ↑ "The Debunker: Did Benjamin Franklin Invent the Franklin Stove?". 15 July 2014.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.