German Gyro Matto

Last updated

Matto
Role Autogyro
National origin Germany
Manufacturer German Gyro Safety Aviation GmbH
Introduction2013
StatusIn production (2017)

The German Gyro Matto is a German autogyro, designed and produced by German Gyro Safety Aviation GmbH of Menden, introduced at the AERO Friedrichshafen airshow in 2013. The aircraft is supplied complete and ready-to-fly. [1]

Contents

Design and development

The Matto features a single main rotor, a two-seats-in side-by-side configuration enclosed cockpit with a windshield, tricycle landing gear with wheel pants and a 130 hp (97 kW) GG 912 VT engine in pusher configuration. [1]

The aircraft fuselage is made from a combination of carbon fibre and Kevlar. Its two-bladed rotor has a diameter of 8.52 m (28.0 ft) and a chord of 21.5 cm (8.5 in). The aircraft has a typical empty weight of 296 kg (653 lb) and a gross weight of 560 kg (1,235 lb), giving a useful load of 264 kg (582 lb). With full fuel of 130 litres (29 imp gal; 34 US gal) the payload for the pilot, passenger and baggage is 171 kg (377 lb). [1]

The design incorporates a number of safety features, including a ballistic parachute mounted inside the rotor mast, which ensures that the rotor will not contact the parachute as it is deployed. Other safety features include a fire-proof cockpit, rupture-resistant and fuel tanks and anti-collision strobe lights. [1]

Specifications (Matto)

Data from Tacke [1]

General characteristics

Performance

See also

Related Research Articles

AutoGyro MT-03 German autogyro

The AutoGyro MT-03 is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft.

ELA 07

The ELA 07 is a series of Spanish autogyros, designed and produced by ELA Aviación of Córdoba, Andalusia. The aircraft are supplied complete and ready to fly.

Trixy G 4-2 R

The Trixy G 4-2 R is an Austrian autogyro, designed and produced by Trixy Aviation Products of Dornbirn. The aircraft was introduced at the Aero show held in Friedrichshafen in 2011 and when it was available it was supplied as a complete ready-to-fly-aircraft.

Celier Xenon 4

The Celier Xenon 4 is a Maltese autogyro designed by Raphael Celier and produced by Celier Aviation of Safi, Malta. The aircraft is supplied complete and ready-to-fly.

ELA 10 Eclipse

The ELA Aviation ELA 10 Eclipse is a two place enclosed autogyro, designed and built by ELA Aviación of Córdoba, Andalusia, introduced at the AERO Friedrichshafen airshow in 2014. The aircraft is supplied complete and ready-to-fly.

Apollo Gyro AG1

The Apollo Gyro AG1 is a Hungarian autogyro produced by Apollo Ultralight Aircraft, of Eger and introduced in 2012. The aircraft is supplied ready-to-fly.

Trendak Tercel

The Trendak Tercel is a Polish autogyro designed and produced by Aviation Artur Trendak of Jaktorów-Kolonia, Poland, introduced at the AERO Friedrichshafen show in 2014. The aircraft is supplied complete and ready-to-fly.

The Aviomania G2SA Genesis Duo is a Cypriot autogyro designed in 2007 by Nicolas Karaolides and produced by Aviomania of Larnaca. The aircraft is supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.

The Aviomania G1SA Genesis Solo is a Cypriot autogyro that was designed by Nicolas Karaolides and produced by Aviomania of Larnaca. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.

DTA J-RO French autogyro

The DTA J-RO (transl. gyro) is a French autogyro designed and produced by DTA sarl of Montélimar. The aircraft is supplied complete and ready-to-fly.

ELA 09 Junior

The ELA 09 Junior is a Spanish autogyro designed and produced by ELA Aviación of Córdoba, Andalusia, introduced in the mid-2010s. The aircraft is supplied complete and ready-to-fly.

The Freewind Bumble B (transl. Bumblebee) is a French autogyro that was designed and produced by Freewind Aviation of Vimory, introduced in about 2013. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.

Niki Kallithea

The Niki Kallithea is a Bulgarian autogyro designed and produced by Niki Rotor Aviation of Pravets, introduced in 2011. The aircraft is supplied complete and ready-to-fly.

Russian Gyroplanes Gyros-1 Farmer Russian gyroplane

The Russian Gyroplanes Gyros-1 Farmer is a Russian autogyro designed and produced by Russian Gyroplanes of Zhukovsky, Moscow Oblast. The aircraft is supplied complete and ready-to-fly.

Russian Gyroplanes Gyros-2 Smartflier Russian gyroplane

The Russian Gyroplanes Gyros-2 Smartflier is a Russian autogyro designed and produced by Russian Gyroplanes of Zhukovsky, Moscow Oblast. The aircraft is supplied complete and ready-to-fly.

The SkyCruiser Autogyro SkyCruiser is a series of Hungarian autogyros designed and produced by SkyCruiser Autogyro KFT of Inárcs. It was publicly introduced at the AERO Friedrichshafen airshow in 2014. The aircraft is supplied complete and ready-to-fly.

The Titanium Explorer is an Australian autogyro designed by Neil Sheather and Andrew Pepper and produced by Titanium Auto Gyro of Attunga, New South Wales. The aircraft is supplied complete and ready-to-fly, although development of a kit for amateur construction was underway in 2015.

The Trixy Trixformer is an Austrian roadable aircraft autogyro/electric motorcycle designed and produced by Trixy Aviation Products of Dornbirn, introduced in 2014. The vehicle is supplied complete and ready-to-fly.

Trixy Princess

The Trixy Princess is an Austrian autogyro designed and produced by Trixy Aviation Products of Dornbirn. The aircraft is supplied complete and ready-to-fly.

Dynali H3 EasyFlyer

The Dynali H3 EasyFlyer, now known as the Sport, is a Belgian helicopter designed and produced by the Dynali of the Thines district of Nivelles. The aircraft is supplied complete and ready-to-fly-aircraft or as a kit for amateur construction.

References

  1. 1 2 3 4 5 Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015-16, page 194. Flying Pages Europe SARL, 2015. ISSN   1368-485X