Glass marimba

Last updated

The glass marimba is a type of idiophone also known as a vitrephone or crystallophone. Marimba translates to "a xylophone-like instrument" from an African language, probably Bantu. The glass keys are made of either hard glass (plate glass) or soft glass (stained glass). The keys are resonated with either a single open top box or individual resonators for each key. Mallets used to play the marimba can be constructed using a compressed silicone ball (bouncy ball) attached to one end of a wooden or synthetic dowel. These mallets bring out the purest sound from glass marimba. Other types of mallets are used for different effects. The tuning system of a glass marimba can be whatever is desired. Glass marimbas are utilised by the Brazilian percussion ensemble, Uakti.

Construction

Glass marimba can be constructed in a variety of ways.

How one resonates the keys governs the construction method and design.

Resonation can be accomplished using a single resonator which all the keys resonate into, such as an open top box, or individual resonators for each key which can be a tube, box, or sphere. Single box resonators can be constructed from wood, glass, or metal among a variety of materials. Individual resonators can be made from gourds, wood, bamboo, clay, glass, pvc, or metal, to name a few.

The keys also govern the design of the marimba due to the fact that the keys are supported at points called nodes and these dictate the shape of the marimba due to the graduated lengths of the keys and how one supports them. Also, the width of the keys, which can be graduated, determines the overall length.

Keys can be made from plate glass or stained glass. With stained glass, two pieces must be fused together in a kiln to obtain the necessary thickness of 1/4" for the most common glass marimba tunings, though thinner and thicker keys can be used for low and high tunings. Tuning is accomplished most commonly by removing glass from the end of the key which causes the note to go up. Removing glass from the bottom of the key will cause the note to go down but is only feasible if one is using opaque glass for the keys.

The keys are best supported on a pad of open cell foam mounted to a thin piece of wood and encased in cloth.

The keys are attached with double sided clear tape. Silicone glue is also used.

An alternate method of attachment is to use posts between each key on one side and a single post going through a hole in the key on the other side.

Related Research Articles

Xylophone Mallet percussion instrument

The xylophone is a musical instrument in the percussion family that consists of wooden bars struck by mallets. Like the glockenspiel, the xylophone essentially consists of a set of tuned keys arranged in the fashion of the keyboard of a piano. Each bar is an idiophone tuned to a pitch of a musical scale, whether pentatonic or heptatonic in the case of many African and Asian instruments, diatonic in many western children's instruments, or chromatic for orchestral use.

Marimba Mallet percussion instrument

The marimba is a percussion instrument consisting of a set of wooden bars struck with yarn wrapped or rubber mallets to produce musical tones. Resonators or pipes are suspended underneath the bars to amplify the sound of the wooden bars. The bars of a chromatic marimba are arranged like the keys of a piano, with the groups of two and three accidentals raised vertically, overlapping the natural bars to aid the performer both visually and physically. This instrument is a type of idiophone, but with a more resonant and lower-pitched tessitura than the xylophone.

Vibraphone Mallet percussion instrument

The vibraphone is a musical instrument in the struck idiophone subfamily of the percussion family. It consists of tuned metal bars and is typically played by using mallets to strike the bars. A person who plays the vibraphone is called a vibraphonist,vibraharpist, or vibist.

Hornbostel–Sachs or Sachs–Hornbostel is a system of musical instrument classification devised by Erich Moritz von Hornbostel and Curt Sachs, and first published in the Zeitschrift für Ethnologie in 1914. An English translation was published in the Galpin Society Journal in 1961. It is the most widely used system for classifying musical instruments by ethnomusicologists and organologists. The system was updated in 2011 as part of the work of the Musical Instrument Museums Online (MIMO) Project.

Metallophone

A metallophone is any musical instrument in which the sound-producing body is a piece of metal, consisting of tuned metal bars, tubes, rods, bowls, or plates. Most frequently the metal body is struck to produce sound, usually with a mallet, but may also be activated by friction, keyboard action, or other means.

Resonator Device or system that exhibits resonance

A resonator is a device or system that exhibits resonance or resonant behavior. That is, it naturally oscillates with greater amplitude at some frequencies, called resonant frequencies, than at other frequencies. The oscillations in a resonator can be either electromagnetic or mechanical. Resonators are used to either generate waves of specific frequencies or to select specific frequencies from a signal. Musical instruments use acoustic resonators that produce sound waves of specific tones. Another example is quartz crystals used in electronic devices such as radio transmitters and quartz watches to produce oscillations of very precise frequency.

Lamellophone Class of musical instruments

A lamellophone is a member of the family of musical instruments that makes its sound by a thin vibrating plate called a lamella or tongue, which is fixed at one end and has the other end free. When the musician depresses the free end of a plate with a finger or fingernail, and then allows the finger to slip off, the released plate vibrates. An instrument may have a single tongue or a series of multiple tongues.

Marímbula Lamellophone from the Caribbean

The marímbula is a plucked box musical instrument of the Caribbean. In Cuba it is common in the changüí genre, as well as old styles of son. In Mexico, where it is known as marimbol is played in son jarocho; in the Dominican Republic, where it is known as marimba, it is played in merengue típico, and in Jamaica it is known as rumba box and played in mento.

Organ pipe Musical instrument part

An organ pipe is a sound-producing element of the pipe organ that resonates at a specific pitch when pressurized air is driven through it. Each pipe is tuned to a specific note of the musical scale. A set of organ pipes of similar timbre comprising the complete scale is known as a rank; one or more ranks constitutes a stop.

Gangsa Indonesian musical instrument used in Gamelan

A gangsa is a type of metallophone which is used mainly in Balinese and Javanese Gamelan music in Indonesia. In Balinese gong kebyar styles, there are two types of gangsa typically used: the smaller, higher pitched kantilan and the larger pemade. Each instrument consists of several tuned metal bars each placed over an individual resonator. The bars are hit with a wooden panggul, each producing a different pitch. Duration of sound intensity and sound quality factors are generally accomplished by damping the vibration of the bar with the fingers of the free hand. Balinese gong kebyar gangsas, as with other metallophones in gong kebyar ensembles, are played in neighboring pairs with interlocking, rapid-tempo parts that elaborate on the melody of a piece of music ; these pairs are tuned to be dissonant and create certain wavelengths of sympathetic vibrations to create a shimmering tone that travels long distances. The gangsa is very similar to the old gendér and the saron.

Gendèr Indonesian musical instrument used in Gamelan

A gendèr is a type of metallophone used in Balinese and Javanese gamelan music. It consists of 10 to 14 tuned metal bars suspended over a tuned resonator of bamboo or metal, which are tapped with a mallet made of wooden disks (Bali) or a padded wooden disk (Java). Each key is a note of a different pitch, often extending a little more than two octaves. There are five notes per octave, so in the seven-note pélog scale, some pitches are left out according to the pathet. Most gamelans include three gendèr, one for sléndro, one for pelog pathet nem and lima, and one for pelog pathet barang.

Uakti (band)

Uakti (WAHK-chee) was a Brazilian instrumental musical group that was composed of Marco Antônio Guimarães, Artur Andrés Ribeiro, Paulo Sérgio Santos, and Décio Ramos. Uakti was known for using custom-made instruments, built by the group itself.

Tro (instrument) Traditional bowed string instruments from Cambodia

The tro is Cambodia's traditional spike fiddles, bowed string instruments that are held and played vertically. Spike fiddles have a handle that passes through the resonator, often forming a spike, on the bottom side where it emerges. The family is similar or distantly related to the Chinese erhu or huqin. The instruments have a soundbox at the bottom of the stick, covered with leather or snake skin. Strings run from pegs at the top of the stick and secured at the bottom, running across the soundbox. The larger the soundbox, the lower the pitch range. Instruments in this family include the two-stringed tro outro sau thomtro sau toch and tro che, as well as the three-stringed tro Khmer spike fiddle. The two-stringed tros are tuned in a fifth, while the three-stringed tro Khmer is tuned in fourths. The tros, with the exception of the tro Khmer, are strung so that the bowstring is permanently placed between the two stings. When the musician plays, the placement of the bow causes the strings to be played at once, one from below and one from above. In contrast, western fiddles are played with the bow pushing on each string from the outside, as is also the case with the tro khmer.

Resonator guitar Fretted string instrument modified for loudness

A resonator guitar or resophonic guitar is an acoustic guitar that produces sound by conducting string vibrations through the bridge to one or more spun metal cones (resonators), instead of to the guitar's sounding board (top). Resonator guitars were originally designed to be louder than regular acoustic guitars, which were overwhelmed by horns and percussion instruments in dance orchestras. They became prized for their distinctive tone, however, and found life with bluegrass music and the blues well after electric amplification solved the problem of inadequate volume.

Bladder fiddle

The bladder fiddle was a folk instrument used throughout Europe and in the Americas. The instrument was originally a simple large stringed fiddle made with a long stick, one or more thick gut strings, and a pig's-bladder resonator. It was bowed with either a notched stick or a horsehair bow.

Bass trap

Bass traps are acoustic energy absorbers which are designed to damp low frequency sound energy with the goal of attaining a flatter low frequency (LF) room response by reducing LF resonances in rooms. They are commonly used in recording studios, mastering rooms, home theatres and other rooms built to provide a critical listening environment. Like all acoustically absorptive devices, they function by turning sound energy into heat through friction.

Khong wong yai

The khong wong yai is a circle with gongs used in the music of Thailand. It has 16 tuned bossed gongs in a rattan frame and is played with two beaters. The player sits in the center of the circle. It is used in the piphat ensemble to provide the skeletal melody the other instruments of the elaborate ensemble. The gongs are individually tuned with beeswax under the gongs. The khong wong yai can either be played with soft beaters or hard beaters.

Melodic percussion instrument

A melodic percussion instrument is a percussion instrument used to produce several different notes of different pitches. Melodic percussion instruments are examples of pitched percussion and include mallet percussion and keyboard percussion.

Instruments by Harry Partch

The American composer Harry Partch (1901-1974) composed using scales of unequal intervals in just intonation, derived from the natural Harmonic series; these scales allowed for more tones of smaller intervals than in the standard Western tuning, which uses twelve equal intervals. One of Partch's scales has 43 tones to the octave. To play this music, he built many unique instruments, with names such as the Chromelodeon, the Quadrangularis Reversum, and the Zymo-Xyl.

References