Gougeon 32

Last updated

Gougeon 32
Development
Designer Jan Gougeon
Location United States
Year1990
No. built14
Builder(s) Gougeon Brothers
NameGougeon 32
Boat
Boat weight 1,100 lb (499 kg)
Draft 4.25 ft (1.30 m)
Hull
Type Catamaran
Construction Fiberglass with balsa and foam cores
LOA 32.00 ft (9.75 m)
LWL 32.00 ft (9.75 m)
Beam 8.3 ft (2.5 m)
Engine type8 hp (6 kW) outboard motor
Hull appendages
Keel/board typetwo daggerboards
Ballast1,200 lb (544 kg) water
Rudder(s)two transom-mounted rudders
Rig
Rig type Bermuda rig
Sails
Sailplan Fractional rigged sloop
Mainsail area187 sq ft (17.4 m2)
Jib/genoa area109 sq ft (10.1 m2)
Total sail area296 sq ft (27.5 m2)
[ edit on Wikidata]

The Gougeon 32 is an American trailerable catamaran that was designed by Jan Gougeon and first built in 1990. [1] [2] [3]

Contents

Production

The design was built by Gougeon Brothers in Bay City, Michigan, United States. The company completed 14 examples of the type between 1990 and 1992, but it is now out of production. [1] [2] [3]

Development

Gougeon Brothers is a composite manufacturing company, that has built many products from composite material and also developed their own materials and processes. By 1990 the company had built many custom-built racing sailboats, but had never embarked on a mass-market production boat design before. [1]

The Gougeon 32 was a project that the company embarked upon as a complementary effort while their wind turbine blade manufacturing was ramping up after three years out of production, following the wind turbine market's 1986 crash. The sailboat design was commenced in 1990 as an intended production commercial product that would also be used to development new composite materials and techniques. [1]

The boat's design goals were, "a lightweight, trailerable catamaran that was fast, fun to sail, had weekend accommodations for 2 or 3 and was priced below $35,000." The design was intended to reach a break-even point at a production rate of two boats per week and would be profitable at three boats per week. The design challenge was to built a boat of this size that could be transported on a trailer behind a mid-sized car, a requirement that restricted the design to a towed weight of a maximum of 2,200 lb (998 kg). [1]

The design used a new manufacturing technique: single vacuum bag moulded epoxy resin laminate construction, conventional polyester gelcoat and reinforcing fibers fully wetted-out mechanically on a rolling machine. It used low-temperature cured epoxy resin with long cure times to achieve the desired finished physical properties. This process became the company's Pro-Set process, which has been commercially successful. [1]

In 1992 the company sold its wind turbine blade manufacturing business and terminated the catamaran production at the same time, having produced only 14 boats and never achieved full series production. [1]

Design

The Gougeon 32 is a recreational sailboat, built predominantly of fiberglass with balsa and foam cores, with aluminum spars. It has a fractional sloop rig with a fully battened mainsail, a jib and provisions for a light wind drifter sail. The two hulls have plumb stems, vertical transoms, transom-hung rudders controlled by a central tiller and a daggerboard in each hull. It displaces 1,100 lb (499 kg) and carries 1,200 lb (544 kg) of flooding water ballast, 600 lb (272 kg) in each hull. The ballast is drained for road transport. [1] [2] [3]

The boat has a draft of 4.25 ft (1.30 m) with the daggerboards extended, allowing beaching or ground transportation on a trailer with the boards retracted. [2] [3]

The boat is normally fitted with a small outboard motor for docking and maneuvering. The fuel tank holds 6 U.S. gallons (23 L; 5.0 imp gal). [2] [3]

The design has sleeping accommodation for two adults and two children. The cabin floor is padded and can be used for additional sleeping space, as can the open cockpit. The interior seating is made from fiberglass. The galley includes a small sink and a single-burner propane stove for cooking. The head is a portable type. A bow trampoline provides space and also deflects spray when sailing. [2] [3]

The mast is a rotating design, hinged for ground transport, folding forward over the towing vehicle. The mast is supported by a single set of shrouds and running backstays. The mainsail may be reefed by rolling around the rotating boom, while the jib has roller furling. There is a full-width mainsheet traveler and the mainsheet itself has an 8:1 mechanical advantage. [2]

Operational history

The 14 boats in service have won numerous races. [1]

In the 2017 Race to Alaska, Russell Brown skippered his Gougeon 32, Incognito, to first place in the solo class. [4]

In a review Richard Sherwood described the design, "the Gougeon 32 is a big, fast, stable catamaran that can be sailed by one or two and will sleep two adults and two children. In addition, you can camp out in the cockpit. Six hundred pounds of water ballast may be placed in each hull for stability, but may be drained for trailering. [2]

See also

Similar sailboats

Related Research Articles

Hobie Cat Small sailing catamaran

Hobie Cat is a company that manufactures sailing catamarans, surfboards, sailboats, kayaks, stand-up paddle boards, and pedalboards as the Hobie Cat Company. It was founded in 1961 by Hobart Alter, who originally manufactured surfboards. Its line of products has included more than twenty sailing craft, plus a variety of other watercraft.

Jet 14 Sailboat class

The Jet 14 is an American sailing dinghy that was designed by Howard Siddons as a one-design racer and first built in 1952.

Windmill (sailing dinghy) Sailboat class

The Windmill is an American sailing dinghy that was designed by Clark Mills as a one-design racer and first built in 1953.

Banshee (dinghy) Sailboat class

The Banshee, sometimes called the Banshee 13, is an American sailing dinghy that was designed by Richard L. Reid as a one-design racer and first built in 1969.

The Coronado 15 is an American sailing dinghy that was designed by Frank V. Butler as a one-design racer and first built in 1968.

OPEN Skiff Sailboat class

The O'PEN Skiff or O'pen Skiff, is a sailing dinghy that was designed by Vitali Design of Italy for children's sail training and as a one design racer. It was first built in 2006.

The Marlow-Hunter 50 is an American sailboat that was designed by the Hunter Design Team as a cruiser and first built in 2010.

The Stiletto 27 is an American trailerable catamaran sailboat that was designed by Bill Higgins and Don Ansley as a racer/cruiser and first built in 1976.

Hobie 17 Sailboat class

The Hobie 17 is an American catamaran that was designed by John Wake as a single-handed racer and first built in 1985.

The Puffer is an American rowboat, motorboat and sailing dinghy that was designed by Fred Scott and first built in 1972.

The Cheshire 14 is an American catamaran sailing dinghy that was designed by Frank Meldau as a racer and first built in 1962.

The Trac 14 is an American catamaran sailing dinghy that was designed by Australians Richard McFarlane and Jay McFarlane as a one-design racer and first built in 1980.

The Flying Phantom Elite is a French hydrofoil catamaran sailing dinghy that was designed by Martin Fischer and draws on the work of Alex Udin, Franck Cammas and the Groupama sailing team. It is intended as a one-design racer and was first built in 2015.

The Flying Phantom Essentiel,, is a French hydrofoil catamaran sailing dinghy that was designed by Gonzalo Redondo and Martin Fischer and first built in 2017.

Nacra 20 Sailboat class

The Nacra 20 is a catamaran sailing dinghy that was designed by Gino Morrelli and Pete Melvin as a one-design racer and first built in 1998.

The Nacra 5.2 is an American catamaran sailing dinghy that was designed by Tom Roland as a one-design racer and first built in 1975. Other that the small production run Nacra 36, the Nacra 5.2 was the first Nacra brand boat and established its reputation.

The G-Cat 5.0 is an American catamaran sailing dinghy that was designed by Hans Geissler as a one-design racer and first built in 1975.

The G-Cat 5.7 is an American catamaran sailing dinghy that was designed by Hans Geissler as a one-design racer and first built in 1980.

The Prindle 18 is an American catamaran sailing dinghy that was designed by Geoffrey Prindle as a racer and first built in 1977.

The Allegra 24 is an American trailerable sailboat that was designed by Fred Bingham and Lou Nagy and based upon the work of Fred Bingham's son, Bruce Bingham. The boat is intended as a cruiser and was first built in 1984.

References

  1. 1 2 3 4 5 6 7 8 9 Gougeon, Meade (1 April 1996). "Development, Design and Construction of the G-32 Sailboat". gougeon.com. Archived from the original on 18 April 2018. Retrieved 17 August 2019.
  2. 1 2 3 4 5 6 7 8 Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 244-245. Houghton Mifflin Company, 1994. ISBN   0-395-65239-1
  3. 1 2 3 4 5 6 McArthur, Bruce (2019). "Gougeon 32 sailboat". sailboatdata.com. Archived from the original on 21 August 2019. Retrieved 21 August 2019.
  4. ↑ Cort, Adam (31 August 2017). "Eight Bells: Meade A. Gougeon". Sail magazine. Archived from the original on 17 August 2019. Retrieved 15 August 2019.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.