Mustang 22

Last updated

Mustang 22
Development
Designer Martin Bludworth
Location United States
Year1969
Builder(s) PlasTrend
Role Racer
NameMustang 22
Boat
Boat weight 1,950 lb (885 kg)
Draft 5.25 ft (1.60 m) with centerboard down
Hull
Type monohull
Construction fiberglass
LOA 22.00 ft (6.71 m)
LWL 17.00 ft (5.18 m)
Beam 7.00 ft (2.13 m)
Engine type outboard motor
Hull appendages
Keel/board typestub keel with centerboard
Ballast750 lb (340 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig type Bermuda rig
I foretriangle height21.83 ft (6.65 m)
J foretriangle base7.67 ft (2.34 m)
P mainsail luff25.00 ft (7.62 m)
E mainsail foot10.50 ft (3.20 m)
Sails
Sailplan fractional rigged sloop
Mainsail area131.25 sq ft (12.194 m2)
Jib/genoa area83.72 sq ft (7.778 m2)
Total sail area214.97 sq ft (19.971 m2)
Racing
Class association MORC
PHRF 225

The Mustang 22 is an American trailerable sailboat that was designed by Martin Bludworth as a Midget Ocean Racing Club racer and first built in 1969. [1] [2] [3] [4] [5]

Contents

The design is similar to the PlasTrend 22. [1] [2] [4] [6]

Production

The design was built by PlasTrend of Fort Worth, Texas, a company later known as Composite Technologies and then finally Island Yacht Corp. It was built from 1969 until 1973 in the United States, but it is now out of production. [1] [4] [7]

Design

The Mustang 22 is a recreational keelboat, built predominantly of fiberglass. It has a fractional sloop rig or optional masthead sloop rig; a spooned, raked stem; a raised counter, reverse transom, an internally mounted spade-type rudder controlled by a tiller and a fixed stub keel with a split bulb, with a retractable centerboard, which is raised and lowered by a winch. It displaces 1,950 lb (885 kg) and carries 750 lb (340 kg) of ballast. [1] [4]

The boat has a draft of 5.25 ft (1.60 m) with the centerboard extended and 2.33 ft (0.71 m) with it retracted, allowing operation in shallow water or ground transportation on a trailer. [1] [4]

The boat is normally fitted with a small 3 to 6 hp (2 to 4 kW) outboard motor for docking and maneuvering. [4]

The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin, a straight settee on the port side in the main cabin and an aft quarter berth on the port side. The galley is located on both sides just aft of the bow cabin. The optional galley may be equipped with a stove and a sink. The head is in the bow cabin under the "V"-berth. Cabin headroom is 44 in (112 cm). [1] [4]

For sailing downwind the design may be equipped with a symmetrical spinnaker. [1] [4]

The design has a PHRF racing average handicap of 225 and a hull speed of 5.5 kn (10.2 km/h). [4]

Variants

Mustang 22
This model has a fractional sloop rig, with a sail area of 214.97 sq ft (19.971 m2). [1] [4]
Mustang 22 MH
This model has a masthead sloop rig with a sail area of 196.77 sq ft (18.281 m2). [2]

Operational history

In a 2010 review Steve Henkel wrote that the boat "has an unusual keel-centerboard arrangement, which includes a bulb on the keel ... combined with a centerboard slot splitting the keel in two. The centerboard, weighing 150 pounds, is cranked up and down using a winch mounted on the aft cabin bulkhead on the starboard side of the cockpit. A small inboard was optional, though we don’t see where it would fit in such a shallow hull. Best features: She looks sleek and fast, with her long cockpit and low profile. Worst features: Her buoyancy is low, due to her extended counter and pinched aft end thereby limiting weight at the back end, so her long cockpit is mostly unusable while racing. Her relatively narrow beam and low sitting headroom keep her from being a very comfortable cruiser—not that many owners would have cruising in mind, anyway. Finally, her diamond strut and 3/4 fractional rig give her an old-fashioned, outmoded look." [4]

See also

Related Research Articles

The Irwin 41 is an American sailboat that was designed by Ted Irwin as a cruiser and first built in 1982.

The Windrose 5.5 is an American trailerable sailboat that was designed by W. Shad Turner as a pocket cruiser and first built in 1977.

The Bristol Caravel 22, sometimes called the Bristol 22 Caravel, Sailstar Caravel, or just the Caravel 22, is an American trailerable sailboat that was designed by Halsey Chase Herreshoff as a cruiser and first built in 1968. It is named for the class of sailing ship.

The Cal 22 is an American trailerable sailboat that was designed by C. R. Hunt Associates as a cruiser and first built in 1984.

The Columbia T-23, or Columbia T23, is an American sailboat that was designed by Australian Alan Payne and first built in 1973. The "T" designation indicates that the boat is designed to be trailerable.

The Ericson 25+, also called the Ericson 25 Mark II, is an American trailerable sailboat that was designed by Bruce King as a cruiser and first built in 1978.

The Gloucester 22 is an American trailerable sailboat that was designed by Stuart Windley and Harry R. Sindle as a cruiser and first built in 1983.

The Bahia 22, also called the Bahia 23, is a French trailerable sailboat that was designed by Philippe Harlé as a pocket cruiser and first built in 1983.

The MacGregor 19, also called the PowerSailer 19, is an American trailerable sailboat that was designed by Roger MacGregor as a cruiser and first built in 1992.

Matilda 20 Sailboat class

The Matilda 20 is a trailerable sailboat that was designed by Robert Tucker as a daysailer and a cruiser and first built in 1971.

The Neptune 24 is an American trailerable sailboat that was designed as a cruiser and first built in 1978.

The Nimble 25 Arctic, also called just the Nimble 25, is an American trailerable sailboat that was designed by Ted Brewer as a cruiser and first built in 1988.

Beneteau Oceanis 35.1 Sailboat class

The Beneteau Oceanis 35.1 is a French sailboat that was designed by Group Finot/Conq, with an interior by Nauta Design, as a cruiser and first built in 2017.

The O'Day 20 is an American trailerable sailboat that was designed by John Deknatel of C.R. Hunt & Associates as a pocket cruiser and first built in 1973.

The O'Day 22 is an American trailerable sailboat that was designed by C. Raymond Hunt & Associates as a cruiser and first built in 1972.

The O'Day 222 is an American trailerable sailboat that was designed by C. Raymond Hunt Associates as a cruiser and first built in 1984.

The Pearson 23 is an American trailerable sailboat that was designed by William Shaw as a cruiser and first built in 1978.

The Seaward 23 is an American trailerable sailboat that was designed by Nick Hake as a pocket cruiser and first built in 1984.

The Slipper 17 is an American trailerable sailboat that was designed by Nick Hake as a pocket cruiser and first built in 1981.

The Starwind 22 is an American trailerable sailboat that was designed by Halsey Herreshoff as a cruiser and first built in 1982.

References

  1. 1 2 3 4 5 6 7 8 McArthur, Bruce (2021). "Mustang 22 sailboat". sailboatdata.com. Archived from the original on 31 October 2021. Retrieved 31 October 2021.
  2. 1 2 3 McArthur, Bruce (2021). "Mustang 22 MH sailboat". sailboatdata.com. Archived from the original on 31 October 2021. Retrieved 31 October 2021.
  3. McArthur, Bruce (2021). "Martin Bludworth". sailboatdata.com. Archived from the original on 31 October 2021. Retrieved 31 October 2021.
  4. 1 2 3 4 5 6 7 8 9 10 11 Henkel, Steve: The Sailor's Book of Small Cruising Sailboats, page 192. International Marine/McGraw-Hill, 2010. ISBN   978-0-07-163652-0
  5. "Plas Trend". Motorboating. January 1968. Retrieved 31 October 2021.
  6. McArthur, Bruce (2021). "PT-22 1/4 Ton (Plas Trend 22)". sailboatdata.com. Archived from the original on 31 October 2021. Retrieved 31 October 2021.
  7. McArthur, Bruce (2021). "Plastrend / Composite Technologies 1968 - 1989". sailboatdata.com. Archived from the original on 31 October 2021. Retrieved 31 October 2021.