Hot Saw

Last updated

Hot Saw is an event or discipline in logging sports. It is also used to describe the type of saw used in the event, a high-powered chainsaw.

Contents

Overview

Junior World Champion Ferry Svan practicing in 2017 Ferry Svan 01.png
Junior World Champion Ferry Svan practicing in 2017

This event is often the crowd's favourite, [1] and certainly the loudest. Compared to other logging sports using an axe or manual saw, this event uses a motor-powered chainsaw. However, to stick to the traditional ethos, the chainsaw must be either completely homemade or self-modified in some way, within certain restrictions; one required modification is for the competitor to add a super engine. The chainsaws are large and methanol-run. The saws used by top competitors are typically snowmobile or watercraft engines cut in half, and are far heavier than regular chainsaws. [2] The event has been described as "[m]ore of an engineering challenge than a day-of competition" because of this. [3] In it, competitors will cut cookies — circular disks from logs — of certain specifications as quickly as they can. Competitors view it as the hardest event, but also a favourite. [2] Before beginning the cut, they are usually allowed to warm up their saws in what is called the "pit row", often with mechanics. [4]

Saw-building

The tools used for the event have been called the "most ridiculous modified chainsaw[s]", [3] and are known to walk the line between performance and failure due to their homemade nature. [1] [4] However, as many as 99% of professional competitors don't build their own hot saw, instead buying them from specialist engineers, with 80% of saws on the American circuit built by Russ Lemke; Lemke's saws match reliability with power and have been called "the Stradivarius of its ilk" by Stihl. Several are also built and sold by event record-holder Matt Bush, who is also a talented saw-builder. Bush ran his saw at 404cc, about the highest that has been managed. [1]

The total cost of each hot saw is about $10,000 but can last for decades, with requirements in the event rarely changing. Lemke also recommends constant maintenance of the saws, but also talks about how saw-building is just as exciting as the event itself. [1]

Safety

Due to the power of the chainsaws, safety is taken seriously. The athletes wear face and hearing protection, and chaps, sometimes with other chainsaw safety clothing, and there are shields protecting the audience because of the 20-foot throw of woodchips. [1] Competitors may also wear chainmail under their chaps, and many have saws with safety switches in case they get out of control and need to be quickly stopped. [5] All the people within 15' of a live hot saw must wear hearing protection, too. [6]

Variations

Stihl Timbersports

"Stihl" is burnt into or marked on the log and brands the resulting cookies Timbersports hotsaw 200404a Waiblingen.jpg
"Stihl" is burnt into or marked on the log and brands the resulting cookies

In Stihl Timbersports, the hot saw event sees competitors race to cut three cookies from a horizontal log. The first cut is going down, the second back up. The athletes have to be very strong and skilled, with chainsaws having a chain speed of 240 km/h, a weight of 27 kg, and engines typically having between 62 and 100 horsepower. [7] [1] The Timbersports rules on hot saws are: [1]

  1. It is limited to one cylinder; this rule was put in place after Lemke showed up at the Wisconsin State Championship with a two-cylinder, seen as unfair and dangerous
  2. It has a tuned exhaust
  3. It has a sprocket cover

The competitor must cut no more than 6" from the log, which is marked with a black line. They will also be disqualified if their cookies are not whole. [2] Competitors are also allowed to have a helper, who performs two roles: getting the saw started in the warm-up beforehand, which is a minute, and also cool the saw down. [1]

The current world record is 4.62 seconds, achieved by Adam Lethco in 2022. [8] [9]

Two-man competition

Some competitions are designed for a hot saw that can be held by two woodsmen, often with larger engines that may have been originally designed for cars. Most of these are local. [3]

Lumberjack Championship

In the Lumberjack World Championship, a one cylinder engine chainsaw is used to make three cuts, first down, then up in a white pine log. The chainsaws are off before the time starts, and cannot be self-starting or simple start engines. The record was set by Dave Bolstad of New Zealand in 2007 with a time of 5.55 seconds. [10]

Related Research Articles

<span class="mw-page-title-main">Lumberjack</span> Worker who performs the initial harvesting of trees

Lumberjacks are mostly North American workers in the logging industry who perform the initial harvesting and transport of trees for ultimate processing into forest products. The term usually refers to loggers in the era when trees were felled using hand tools and dragged by oxen to rivers.

<span class="mw-page-title-main">Circular saw</span> Power tool

A circular saw is a power-saw using a toothed or abrasive disc or blade to cut different materials using a rotary motion spinning around an arbor. A hole saw and ring saw also use a rotary motion but are different from a circular saw. Circular saws may also be loosely used for the blade itself. Circular saws were invented in the late 18th century and were in common use in sawmills in the United States by the middle of the 19th century.

<span class="mw-page-title-main">Chainsaw</span> Portable handheld powered cutting tool

A chainsaw is a saw that cuts with a set of teeth attached to a rotating chain driven along a guide bar. Modern chainsaws are used in activities such as tree felling, limbing, bucking, pruning, cutting firebreaks in wildland fire suppression, harvesting of firewood, for use in chainsaw art and chainsaw mills, for cutting concrete, and cutting ice. Precursors to modern chainsaws were first used in surgery, with patents for wood chainsaws beginning in the late 19th century.

<span class="mw-page-title-main">Woodsman</span> Sport based on various skills traditionally part of forestry

Woodsman is a competitive, co-ed intercollegiate sport in the United States, Canada and elsewhere based on various skills traditionally part of forestry educational and technical training programs. In North America, the sport currently is organized in five regional divisions: northeastern, mid-Atlantic, southern, midwestern, and western.

<span class="mw-page-title-main">Chaps</span> Leather leg coverings

Chaps are sturdy coverings for the legs consisting of leggings and a belt. They are buckled on over trousers with the chaps' integrated belt, but unlike trousers, they have no seat and are not joined at the crotch. They are designed to provide protection for the legs and are usually made of leather or a leather-like material. Their name is a shortened version of the Spanish word chaparajos. Chaparajos were named after the chaparral, from which they were designed to protect the legs while riding on horseback. Like much of western American horse culture, the origin of chaparajos was in the south of Spain, from which it then passed on to the part of New Spain that later became Mexico, and has been assimilated into cowboy culture of the American West. They are a protective garment to be used when riding a horse through brushy terrain. In the modern world, they are worn for both practical work purposes and for exhibition or show use. Chaps have also been adopted for use on motorcycles, particularly by cruiser-style motorcycle riders.

<span class="mw-page-title-main">Feller buncher</span> Type of harvester used in logging

A feller buncher is a type of harvester used in logging. It is a motorized vehicle with an attachment that can rapidly gather and cut a tree before felling it.

<span class="mw-page-title-main">Crosscut saw</span> Type of saw optimized for cutting across wood fibres

A crosscut saw is any saw designed for cutting wood perpendicular to (across) the wood grain. Crosscut saws may be small or large, with small teeth close together for fine work like woodworking or large for coarse work like log bucking, and can be a hand tool or power tool.

<span class="mw-page-title-main">Woodchopping</span>

Woodchopping, called woodchop for short, is a sport that has been around for hundreds of years in several cultures. In woodchopping competitions, skilled contestants attempt to be the first to cut or saw through a log or other block of wood. It is often held at state fairs and agricultural shows. Participants are often referred to as axemen.

<span class="mw-page-title-main">Chainsaw safety features</span>

Chainsaws and chainsaw operations have specific risk control methods.

<span class="mw-page-title-main">Chainsaw safety clothing</span> Personal protective equipment for operators of chainsaws

Safety practices generally recommend that chainsaw users wear protective clothing, also known as personal protective equipment or PPE, while operating chainsaws. There is general agreement worldwide on what clothing is suitable, but local jurisdictions have specific rules and recommendations.

<span class="mw-page-title-main">Stihl</span> German manufacturer of handheld power equipment

Stihl is a German manufacturer of chainsaws and other handheld power equipment including trimmers and blowers. Their headquarters are in Waiblingen, Baden-Württemberg, near Stuttgart, Germany. Stihl was founded in 1926 by Andreas Stihl, an innovator in early chain saw production. Stihl says it is the world's best-selling brand of chain saws and the only chain saw manufacturer to make its own saw chains and guide bars. Andreas Stihl AG is a privately held company owned by the descendants of Andreas Stihl. Stihl operates the Stihl Timbersports Series.

The art of chainsaw carving is a fast-growing form of art that combines the modern technology of the chainsaw with the ancient art of woodcarving.

<span class="mw-page-title-main">Workwear</span> Clothing that is worn in the exercise of a service profession, a craft or an engineering profession

Workwear is clothing worn for work, especially work that involves manual labour. Often those employed within trade industries elect to be outfitted in workwear because it is built to provide durability and safety.

<span class="mw-page-title-main">Felling</span> Process of cutting down trees

Felling is the process of cutting down trees, an element of the task of logging. The person cutting the trees is a lumberjack. A feller buncher is a machine capable of felling a single large tree or grouping and felling several small ones simultaneously.

<span class="mw-page-title-main">Lumberjack World Championship</span>

The Lumberjack World Championships are held annually in Hayward, Wisconsin. The event began in 1960 and is held at the Lumberjack Bowl. There are 21 events for both men and women to compete for over $50,000 in prize money. Contestants come from the United States, Canada, Australia, and New Zealand. The events include sawing, chopping, logrolling, and climbing to test the strength and agility of over 100 competitors.

Buddy the Woodsman is a 1934 Warner Bros. Looney Tunes cartoon, directed by Jack King. The short was released on October 27, 1934, and stars Buddy, the second star of the series.

The Stihl Timbersports Series is a series of woodsman or wood chopping competitions where the athletes compete in the use of axes and saws in manners typical for lumberjacks. It was founded in 1985, and currently includes six different disciplines, with both professional and collegiate divisions. The terms 'timbersports' and 'timber sports' are trademarked by Stihl Inc.

<span class="mw-page-title-main">Griffon Ramsey</span> American chainsaw carving artist (born 1980)

Griffon E. Ramsey is an American chainsaw carving artist known for her pop-culture wood sculptures which have appeared at the Australian Chainsaw Carving Championships and the Butler Chainsaw Carving Invitational. Chip Chats magazine described her as a "world-famous" artist with an, "edgy and bold style" while VICE and Uproxx called her a "rock star of the art world" and noted her status as a female in a largely male-dominated field.

Stirling Hart is a Canadian professional lumberjack.

<span class="mw-page-title-main">Ferry Svan</span>

Ferry Svan is a Swedish professional woodchopper and logging sportsman, and the son of champion skier Gunde Svan. He is the first Swedish person to compete in a World Championship in logging sports, the first Swede to win a World Championship, and the youngest person to compete in logging sports as a Senior athlete. He has previously held four Swedish national records. He competes in the Stihl Timbersports Series.

References

  1. 1 2 3 4 5 6 7 8 "Hot and Heavy: The Mechanics Behind Hot Saws". Stihl. Retrieved 23 December 2018.
  2. 1 2 3 "T-series events: Hot Saw". ESPN. Retrieved 23 December 2018.
  3. 1 2 3 Limer, Eric (2016-05-04). "5 Competitive Chainsaw Events That Will Make You Stop and Count Your Fingers". Popular Mechanics. Retrieved 2018-12-23.
  4. 1 2 Company, Duluth Trading (2015-09-01). "Hot Saw Heartache". WhatchamaBlog. Retrieved 2018-12-23.
  5. "'I push the saw. It pushes back': Tim Dowling v the world's best woodchoppers". The Guardian. Retrieved 23 December 2018.
  6. ""Redneck Geometry," Hot Saws, And The Bottom Line: Matt Cogar's Rise To America's Best Lumberjack". VICE. Retrieved 23 December 2018.
  7. "Stihl Hot Saw". Stihl. Retrieved 23 December 2018.
  8. "Hot Saw Records - STIHL TIMBERSPORTS® Database". data.stihl-timbersports.com. Retrieved 2022-10-31.
  9. "Fastest timber sports hot saw (male)". Guinness World Records. Archived from the original on November 9, 2023. Retrieved November 9, 2023.
  10. "World Records Updated Through 2021" (PDF). Lumberjack World Championships. Retrieved November 9, 2023.