Interproximal reduction

Last updated

Interproximal reduction (IPR, also called interproximal enamel reduction (IER), slendering, air rotor stripping (ARS) or reproximation) is the practice of mechanically removing enamel from between the teeth to achieve orthodontic ends, such as to correct crowding, or reshape the contact area between neighboring teeth. [1] After reducing the enamel, the procedure should also involve anatomic re-contouring and the protection of interproximal enamel surfaces. [2]

Contents

History

In 1944, Murray L. Ballard was the first to advocate for the stripping of the lower anterior teeth due to crowding in a paper published in The Angle Orthodontist. Other authors, also advocated about slenderizing the teeth for next 40 years but it was not until 1980s when John J. Sheridan's Air Rotor Stripping technique for Interproximal Reduction captured society wide interest. He published two papers in the Journal of Clinical Orthodontics in which he explained his ARS technique. [3] [4] He stated that the procedure of IPR can be used as an alternative to procedures of extraction or expansion of teeth during orthodontic treatment. In 2004, Zachrisson stated that IPR can be used to improve the esthetics of anterior teeth. When a crowded arch is aligned, "Black Triangles" form which can be removed with IPR of the anterior teeth.

Some evidence suggests that modern diets of soft and processed foods have resulted in a significant decrease in natural interproximal wear, making dental crowding more prevalent in modern populations. [5]

Application

IPR is an irreversible procedure and can be an alternative to dental extraction. [6] Indications for the procedure include mild to moderate crowding (4 - 8mm), [7] black triangles in anterior teeth, enhancing retention and stability after orthodontic treatment, and correction of the Curve of Spee. [2] [8] IPR is contraindicated for patients with a high risk for caries, poor oral hygiene, active periodontal diseases, multiple restorations, greater than 8mm of crowding per arch, hypersensitivity to cold, and large pulp chambers. [2]

Amount

About 50% of proximal enamel can be stripped without causing any dental or periodontal problems. [9] According to Sheridan, 2.5mm of space from IPR of five anterior contacts and 6.4mm of space from IPR from eight posterior contacts can be obtained. It was recommended that no more than 0.5mm - 0.75mm should be removed from each proximal side of the anterior teeth. [10]

Techniques

IPR may be carried out using abrasive metal strips, diamond coated disks, or air-rotor stripping burs and abrasive coated strips. [2] Metal strips may be more appropriate than disks for rotated teeth. Diamond disks must be used properly so as not to leave undercuts on the enamel or come into contact with the patient's soft tissue. When using air-rotor burs, it is recommended that the tips be squared-off so that they do not leave furrows. Burs also tend to produce a rough finish on the enamel surface.

Side-Effects

Excessive heat is known to cause damage to the pulp of the tooth. Therefore, to protect pulp against potential damage of heat, both Sheridan and Zachrissan recommend that water must be used while IPR to reduce any side-effects of this procedure on the dental pulp. IPR has also been known to cause caries and periodontal disease in teeth. [11] [12] However, the association has been a topic of debate for many years now. In fact, an observational study done by Zachrisson which looked at 61 subjects who went through IPR 10 years post-operatively, found that there was no signs of gingival recession or thinning of the labial gingiva in 93% of the patients. [13]

It is recommended that to limit any side-effect of IPR, topical fluoride application on the treated teeth or part-time wear of a thermoformed fluoride varnish-infused retainer. In a study where participants received fluoride after IPR, it was determined that this group had lesser chances of developing caries on the tooth surfaces treated with IPR than the group who did not receive any fluoride. [14]

Related Research Articles

<span class="mw-page-title-main">Clear aligners</span> Transparent dental braces

Clear aligners are orthodontic devices that are a transparent, plastic form of dental braces used to adjust teeth.

Hypodontia is defined as the developmental absence of one or more teeth excluding the third molars. It is one of the most common dental anomalies, and can have a negative impact on function, and also appearance. It rarely occurs in primary teeth and the most commonly affected are the adult second premolars and the upper lateral incisors. It usually occurs as part of a syndrome that involves other abnormalities and requires multidisciplinary treatment.

<span class="mw-page-title-main">Malocclusion</span> Medical condition

In orthodontics, a malocclusion is a misalignment or incorrect relation between the teeth of the upper and lower dental arches when they approach each other as the jaws close. The English-language term dates from 1864; Edward Angle (1855–1930), the "father of modern orthodontics", popularised it. The word "malocclusion" derives from occlusion, and refers to the manner in which opposing teeth meet.

<span class="mw-page-title-main">Palatal expansion</span> Orthodontics device to widen the upper jaw

A palatal expander is a device in the field of orthodontics which is used to widen the upper jaw (maxilla) so that the bottom and upper teeth will fit together better. This is a common orthodontic procedure. The use of an expander is most common in children and adolescents 8–18 years of age. It can also be used in adults, although expansion is more uncomfortable and takes longer in adults. A patient who would rather not wait several months for the end result achieved by a palatal expander may be able to opt for a surgical separation of the maxilla. Use of a palatal expander is most often followed by braces to then straighten the teeth.

<span class="mw-page-title-main">Crossbite</span> Medical condition

Crossbite is a form of malocclusion where a tooth has a more buccal or lingual position than its corresponding antagonist tooth in the upper or lower dental arch. In other words, crossbite is a lateral misalignment of the dental arches.

<span class="mw-page-title-main">Lingual arch</span>

A lingual arch is an orthodontic device which connects two molars in the upper or lower dental arch. The lower lingual arch (LLA) has an archwire adapted to the lingual side of the lower teeth. In the upper arch the archwire is usually connecting the two molars passing through the palatal vault, and is commonly referred as "Transpalatal Arch" (TPA). The TPA was originally described by Robert Goshgarian in 1972. TPAs could possibly be used for maintaining transverse arch widths, anchorage in extraction case, prevent buccal tipping of molars during Burstonian segmented arch mechanics, transverse anchorage and space maintenance.

Self-ligating brackets are defined as "a dental brace, which generally utilizes a permanently installed, moveable component to entrap the archwire". Self-ligating brackets have also been designed which do not require a movable component to hold the wire in place. Self-ligating braces may be classified into two categories: Passive and Active.

Percival Raymond Begg AO was a professor at the University of Adelaide School of Dentistry and a well known orthodontist, famous for developing the "Begg technique". Permanent displays dedicated to the Begg technique can be found in the Smithsonian Institution in Washington DC, the Library of the American Dental Association in Chicago, and the PR Begg Museum at the University of Adelaide.

Lingual braces are one of the many types of the fixed orthodontic treatment appliances available to patients needing orthodontics. They involve attaching the orthodontic brackets on the inner sides of the teeth. The main advantage of lingual braces is their near invisibility compared to the standard braces, which are attached on the buccal (cheek) sides of the tooth. Lingual braces were invented by Craven Kurz in 1976.

Charles J. Burstone was an American orthodontist who was notable for his contributions to biomechanics and force-systems in the field of orthodontics. He was well known for co-development of new orthodontic material such as beta titanium, nickel titanium, and long fiber-reinforced composite. He wrote more than 200 articles in scientific fields.

Calvin Suveril Case was an American orthodontist who is one of the earliest figures in orthodontics. Case did extensive work with cleft lip and palate and is known for developing the Velum Obturator. Case is also known for his part in the Extraction Debate of 1911 that happened between Edward Angle and Case.

American Board of Orthodontics (ABO) is a non-profit professional association for orthodontists founded in 1929.

Samir Bishara was an Egyptian orthodontist.

Scissor bite is a type of bite seen in some mammals such as dogs and humans. This type of bite involves outward positioning of the upper posterior teeth and inward positioning of the lower posterior teeth. The reason for this happening is an expanded upper arch and constricted lower arch.

A lip bumper is a dental appliance used in orthodontics, for various purposes to correct a dentition by preventing the pressure from the soft tissue. Lip bumpers are usually used in orthodontic treatment where the patient has a crowded maxillary or mandibular teeth in an arch.

Surgically assisted rapid palatal expansion (SARPE), also known as surgically assisted rapid maxillary expansion(SARME), is a technique in the field of orthodontics which is used to expand the maxillary arch. This technique is a combination of both Oral and Maxillofacial Surgery and Orthodontics. This procedure is primarily done in adult patients whose maxillary sutures are fused and cannot be expanded via other techniques.

Elastics are rubber bands frequently used in the field of orthodontics to correct different types of malocclusions. The elastic wear is prescribed by an orthodontist or a dentist in an orthodontic treatment. The longevity of the elastic wear may vary from two weeks to several months. The elastic wear can be worn from 12 to 23 hours a day, either during the night or throughout the day depending on the requirements for each malocclusion. The many different types of elastics may produce different forces on teeth. Therefore, using elastics with specific forces is critical in achieving a good orthodontic occlusion.

Open bite is a type of orthodontic malocclusion which has been estimated to occur in 0.6% of the people in the United States. This type of malocclusion has no vertical overlap or contact between the anterior incisors. The term "open bite" was coined by Carevelli in 1842 as a distinct classification of malocclusion. Different authors have described the open bite in a variety of ways. Some authors have suggested that open bite often arises when overbite is less than the usual amount. Additionally, others have contended that open bite is identified by end-on incisal relationships. Lastly, some researchers have stated that a lack of incisal contact must be present to diagnose an open bite.

Anthony Gianelly (1936–2009) was an American orthodontist. He developed the bi-dimensional technique, which is widely used in various private practices of orthodontics and has been the subject of numerous publications over the years.

Orthodontic indices are one of the tools that are available for orthodontists to grade and assess malocclusion. Orthodontic indices can be useful for an epidemiologist to analyse prevalence and severity of malocclusion in any population.

References

  1. ↑ Livas, Christos; Jongsma, Albert Cornelis; Ren, Yijin (2013-10-31). "Enamel Reduction Techniques in Orthodontics: A Literature Review". The Open Dentistry Journal. 7: 146–151. doi: 10.2174/1874210601307010146 . ISSN   1874-2106. PMC   3831306 . PMID   24265652.
  2. 1 2 3 4 Choudhary, A; Gautam, AK; Chouksey, A; Bhusan, M; Nigam, M; Tiwari, M (2015). "Interproximal enamel reduction in orthodontic treatment: A review" (PDF). Journal of Applied Dental and Medical Sciences. 1 (3): 123–127.
  3. ↑ Sheridan, J. J. (1985-01-01). "Air-rotor stripping". Journal of Clinical Orthodontics. 19 (1): 43–59. ISSN   0022-3875. PMID   3882756.
  4. ↑ Sheridan, J. J. (1987-11-01). "Air-rotor stripping update". Journal of Clinical Orthodontics. 21 (11): 781–788. ISSN   0022-3875. PMID   3482080.
  5. ↑ Lombardi, A. V. (January 1982). "The adaptive value of dental crowding: a consideration of the biologic basis of malocclusion". American Journal of Orthodontics. 81 (1): 38–42. doi:10.1016/0002-9416(82)90286-x. PMID   6960695.
  6. ↑ Frindel, Clément (2010). "Clear thinking about interproximal stripping". Journal of Dentofacial Anomalies and Orthodontics. 13 (2): 187–199. doi: 10.1051/odfen/2010208 . ISSN   2110-5715.
  7. ↑ Zachrisson, Björn U.; Minster, Line; Øgaard, Bjørn; Birkhed, Dowen (2011). "Dental health assessed after interproximal enamel reduction: Caries risk in posterior teeth". American Journal of Orthodontics and Dentofacial Orthopedics. 139 (1): 90–98. doi:10.1016/j.ajodo.2010.09.002. ISSN   0889-5406. PMID   21195282.
  8. ↑ Lapenaite, Egle; Lapenaite, Kristina (2014). "Interproximal enamel reduction as a part of orthodontic treatment". Stomatologija, Baltic Dental and Maxillofacial Journal. 16 (1): 19–24. PMID   24824056.
  9. ↑ Lapenaite, Egle; Lopatiene, Kristina (2014-01-01). "Interproximal enamel reduction as a part of orthodontic treatment". Stomatologija / Issued by Public Institution "Odontologijos Studija" ... [et Al.]16 (1): 19–24. ISSN   1822-301X. PMID   24824056.
  10. ↑ Hall, Nathan E.; Lindauer, Steven J.; Tüfekçi, Eser; Shroff, Bhavna (2007-06-01). "Predictors of variation in mandibular incisor enamel thickness". Journal of the American Dental Association. 138 (6): 809–815. doi:10.14219/jada.archive.2007.0270. ISSN   0002-8177. PMID   17545271.
  11. ↑ Radlanski, R. J.; Jäger, A.; Zimmer, B.; Schwestka, R.; Bertzbach, F. (1989-08-01). "[The results of scanning electron microscopy research on interdental stripping in vitro]". Fortschritte der Kieferorthopädie. 50 (4): 276–284. doi:10.1007/bf02164304. ISSN   0015-816X. PMID   2792988. S2CID   24290597.
  12. ↑ Arman, Ayca; Cehreli, S. Burcak; Ozel, Emre; Arhun, Neslihan; Cetinşahin, Alev; Soyman, Mubin (2006-08-01). "Qualitative and quantitative evaluation of enamel after various stripping methods". American Journal of Orthodontics and Dentofacial Orthopedics. 130 (2): 131.e7–14. doi:10.1016/j.ajodo.2006.01.021. ISSN   1097-6752. PMID   16905055.
  13. ↑ Zachrisson, Björn U.; Nyøygaard, Lise; Mobarak, Karim (2007-02-01). "Dental health assessed more than 10 years after interproximal enamel reduction of mandibular anterior teeth". American Journal of Orthodontics and Dentofacial Orthopedics. 131 (2): 162–169. doi:10.1016/j.ajodo.2006.10.001. ISSN   1097-6752. PMID   17276856.
  14. ↑ Twesme, D. A.; Firestone, A. R.; Heaven, T. J.; Feagin, F. F.; Jacobson, A. (1994-02-01). "Air-rotor stripping and enamel demineralization in vitro". American Journal of Orthodontics and Dentofacial Orthopedics. 105 (2): 142–152. doi:10.1016/S0889-5406(94)70110-5. ISSN   0889-5406. PMID   8311036.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.