Kometa-Standard

Last updated
Kometa-Standard
RoleSingle seat Standard Class glider
National origin Bulgaria
DesignerL. Panov and D. Panchovsky
First flight5 August 1960
Number built31

The Kometa-Standard was a Standard Class glider, designed and built in Bulgaria in the early 1960s. Thirty were flown by local gliding clubs.

Contents

Design and development

The Kometa-Standard was the second glider designed by Pavlov and Panchovsky, a fully aerobatic Standard Class aircraft of almost entirely wooden construction, though with fabric covered control surfaces. The wings, straight tapered in plan and set at mid-wing position, were single spar structures with leading edge plywood covered D-boxes. They had 4° of dihedral. There were salmon type fairings, tapering, slender, streamlined bodies, at the tips. The Kometa-Standard had mass-balanced, slotted ailerons and spoilers at 60% chord which opened above and below the wing. [1] [2]

The fuselage of the Kometa-Standard was a plywood covered monocoque with the cockpit extending close to the metal nose cone. The canopy of the prototype was of long bubble form, proud of the rear fuselage line, but this was lowered and reshaped on the production Kometa-Standard II, merging into the rear fuselage from which it was hinged. The cockpit was changed again in the Kometa-Standard III which had a sliding canopy over a reclining seat, making this variant 30 km/h (19 mph) [3] faster than the Kometa-Standard II. Overall, the fuselage tapered uniformly from the cockpit to the tail. The Kometa-Standard had a 110° butterfly tail, its plywood and fabric covered surfaces terminating, like the wings, in little salmon fairings. Its undercarriage was a fixed monowheel, fitted with a brake and assisted by a forward, rubber sprung skid. [1] [2] [3]

Operational history

The prototype was flown for the first time on 5 August 1960 [1] and an initial batch of 10 Kometa-Standard IIs was built, followed by two batches, each of 10, of Kometa-Standard IIIs. [3] Flown by Bulgarian clubs, they were fully aerobatic, though not cleared for cloud flying. [2]

Variants

Data from reference. [3] Numbers from, CD version. [4]

Kometa-Standard
Prototype LZ-901. 1 built.
Kometa-Standard II
Production variant with lowered, rear hinged canopy. 10 built.
Kometa-Standard III
Further revision to nose/canopy lines with reclining seat and sliding canopy. 20 built.

Specifications (Kometa-Standard II)

Data from Gliders and Sailplanes of the World [1] The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde Volume II [5]

General characteristics

Performance

Notes

  1. 1 2 3 4 Hardy, Michael (1982). Gliders & Sailplanes of the World. London: Ian Allan Ltd. p. 62. ISBN   0 7110 1152 4.
  2. 1 2 3 4 5 Shenstone, B.S.; Wilkinson, K.G. (1963). The World's Sailplanes. II (1st ed.). OSTIV & Schweizer Aero-Revue. pp. 38–9.
  3. 1 2 3 4 "Kometa-Standard" . Retrieved 17 September 2012.
  4. ↑ Partington, Dave (2010). European registers handbook 2010. Air Britain (Historians) Ltd. ISBN   978-0-85130-425-0.
  5. ↑ Shenstone, B.S.; K.G. Wilkinson (1963). The World's Sailplanes:Die Segelflugzeuge der Welt:Les Planeurs du Monde Volume II (in English, French, and German) (1st ed.). Zurich: Organisation Scientifique et Technique Internationale du Vol a Voile (OSTIV) and Schweizer Aero-Revue. pp. 34–36.

Related Research Articles

Schleicher K 8

The Schleicher K 8 is a single-seat glider designed by Rudolf Kaiser and built by the Alexander Schleicher company of Germany.

Morelli M-100 Italian single-seat sailplane

The Aer-Pegaso M-100 was a single-seat glider designed and built in Italy from 1967.

Antonov A-13

The Antonov A-13 was a Soviet aerobatic sailplane flown in the 1950s and 1960s. It was a small, single-seat, all-metal aircraft developed from the A-11 which could optionally be fitted with that aircraft's longer-span wings. It was a mid-wing monoplane with a tadpole-like fuselage and a V-tail.

The Schneider ES-59 Arrow is a sailplane designed and manufactured in Adelaide, South Australia in the early 1960s. The Arrow was manufactured with a one-piece wing of 13.23 metres span. It was the first Australian-built sailplane to compete in the World Gliding Championships, 1963 in Argentina. The Arrow has wood/fabric wings and tail and a wood fuselage. It has a fixed main wheel and nose skid.

Slingsby Eagle

The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.

Slingsby Kite

The Slingsby T.6/T.23 Kirby Kite was a single-seat sport glider produced from 1935, by Fred Slingsby in Kirbymoorside, Yorkshire.

The Slingsby T.25 Gull 4 is a British glider designed and built by Slingsby that first flew in 1947.

Scheibe Bergfalke

The Scheibe Bergfalke is a German glider designed by Egon Scheibe as a post-World War II development of the Akaflieg München Mü13 produced before and during the war.

Slingsby Swallow

The Slingsby Type 45 Swallow was designed as a club sailplane of reasonable performance and price. One of the most successful of Slingsby's gliders in sales terms, over 100 had been built when production was ended by a 1968 factory fire.

Slingsby Skylark 4

The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.

N.V. Vliegtuigbouw 013 Sagitta

The N.V. Vliegtuigbouw 013 Sagitta is a Dutch mid-wing, single-seat Standard Class glider designed by Piet Alsema and produced by N.V. Vliegtuigbouw.

Schleicher K7

The Schleicher K7 Rhönadler, aka Ka-7 or K-7, is a West German high-wing, two-seat, glider that was designed by Rudolf Kaiser and produced by Alexander Schleicher GmbH & Co.

Wassmer WA-30 Bijave

The Wassmer WA-30 Bijave is a French two-seat advanced training glider designed and built by Wassmer Aviation of Issoire.

Ikarus Košava

The Ikarus Košava is a two-seat sailplane designed and built in Yugoslavia in the early 1950s. It won the 1954 World Gliding Championships in the two seat category and came second in the same event two years later.

Rubik R-25 Mokány

The Rubik R-25 Mokány, in English: Plucky person and sometimes known as the R-25 Standard (class), is a Hungarian single seat Standard Class glider of all-metal construction, first flown in 1960. It was one of a series of similar aircraft designed by Ernő Rubik. Only one was built.

The Horikawa H-23B-2 is a two-seat training glider designed and built in Japan in the 1950s. It was produced in small numbers.

Antonov A-11

The Antonov A-11 is a single-seat, high performance, all-metal sailplane built in the Soviet Union in the late 1950s. 150 were produced.

The UTG-1 Loudon was an intermediate glider designed and built at the University of Toronto in Canada during the late 1940s.

The IS-2 was an intermediate training glider designed by Iosif Şilimon and built in Romania in the 1950s at the URMV-3 factory at Brașov.

The IS-4 was a high performance glider designed by Iosif Şilimon and built in Romania in the late 1950s at the URMV-3 factory at Braşov.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.