NZR B class (1874)

Last updated

NZR B class (1874)
Snake, a double Fairlie, B class steam locomotive B 238 (0-4-4-0T). ATLIB 257541 (cropped).jpg
Snake, a 0-4-4-0 T Double Fairlie, B class steam locomotive "B" 238
Type and origin
Power typeSteam
Builder Avonside Engine Co., UK
Build date1874
Total produced2
Specifications
Configuration:
   Whyte 0-4-4-0 T (Double Fairlie)
Gauge 3 ft 6 in (1,067 mm)
Driver dia.3 ft 3 in (0.991 m)
Length31 ft 2 in (9.50 m)
Loco weight28 long tons 0 cwt (62,700 lb or 28.4 t)
28 long tons 0 hundredweight (28.4 t; 31.4 short tons)
Fuel capacity1 long ton 14 cwt (3,800 lb or 1.7 t)
1 long ton 14 hundredweight (1.7 t; 1.9 short tons)
Water cap.750 imp gal (3,400 L; 900 US gal)
Firebox:
  Grate area15.0 sq ft (1.39 m2)
Boiler pressure130 lbf/in2 (900 kPa)
Heating surface770 sq ft (72 m2)
Cylinders 4
Cylinder size 9 in × 16 in (229 mm × 406 mm)
Performance figures
Tractive effort 6,912 lbf (30.75 kN)
Career
Operators NZGR
Numbers10, 27
First run1874-1875
Withdrawn1890–1896
DispositionBoth scrapped

The NZR B class of 1874 was the first of two steam locomotive classes to be designated as B by the Railways Department that then oversaw New Zealand's national rail network (the second B class was introduced in 1899). [1] Ordered from the Avonside Engine Company in 1874, the locomotives were of the Double Fairlie type and were the first British-built locomotives to feature Walschaerts valve gear. They were not the first Double Fairlies to operate in New Zealand, as the first two members of the E class had commenced operations in 1872.

Contents

Introduction

The first member of the B class, nicknamed Snake, was introduced in September 1874 and it worked in Auckland; it was followed by its partner Lady Mordaunt on 5 April 1875, which was based in Otago. This locomotive had been ordered by the Otago Provincial Council to work the lightly laid Awamoko branch, but advice received by the council before it an arrived was that it was too heavy. It was sent to work elsewhere and two more locomotives were ordered instead. [2]

In 1876, the Provinces of New Zealand were abolished and a national locomotive classification method was established, and it first split these locomotives into separate classes. The Auckland-based Snake became the sole member of the B class in 1876; Otago locomotives were omitted from the national classification initially, but in 1877, it was necessary to include them as the Main South Line linked the southern provinces. Despite Lady Mordaunt being almost identical to Snake, it was classified as the sole member of the NZR N class as Otago locomotives were classified by an inverse ranking of locomotive weight while all others were classified by cylinder diameter and the number of wheels. Both of these methods of allocating classifications quickly proved impractical and were discarded; in 1879, Lady Mordaunt was reclassified as B class like Snake and they bore the classification for the remainder of their working lives. [3]

The numbers allocated to the locomotives did not stay the same all their lives either. For example, Snake was initially B 10, then B 51, and finally B 238. [4]

Disposal

The two Bs proved unpopular with crews and failed to generate sufficient power, leading to their early withdrawal from service., [5] Snake was retired in 1890 not long after receiving the number of B 238, while Lady Mordaunt lasted another six years. [4] Three of the locomotives four power bogies were used under NZR-built steam cranes, nos 101-103. [2] With both locomotives removed from the Railways Department's books, the B classification was free to be used again in 1899; the N classification was also re-used after it was vacated by Lady Mordaunt, by the N class of 1885.

See also

Related Research Articles

<span class="mw-page-title-main">Railway preservation in New Zealand</span>

Railway preservation in New Zealand is the preservation of historically significant facets of New Zealand's rail transport history. The earliest recorded preservation attempt took place in 1925, although the movement itself did not start properly until 1960.

<span class="mw-page-title-main">NZR F class</span>

The New Zealand F class was the first important class of steam locomotive built to operate on New Zealand's railway network after the national gauge of 3 ft 6 in was adopted. The first locomotives built for the new gauge railways were two E class double Fairlies for the Dunedin and Port Chalmers Railway Company. The F class was the first class ordered by the central government, and between 1872 and 1888, a total of eighty-eight members of the class were constructed.

<span class="mw-page-title-main">NZR A class (1873)</span>

The NZR A class of 1873 consisted of three types of steam locomotives used on New Zealand's railway network of similar specification but differing detail. The first and most numerous were from the Dübs and Company, the next from the Wellington firm E.W. Mills Lion Foundry, and the last from the Scottish firm of Shanks. The specifications are for the Dubs Yorkshire engines.

Locomotives of New Zealand is a complete list of all locomotive classes that operate or have operated in New Zealand's railway network. It does not include locomotives used on bush tramways.

<span class="mw-page-title-main">NZR N class</span>

The N class were 12 steam locomotives that operated on the national rail network of New Zealand. They were built in three batches, including one batch of two engines for the private Wellington and Manawatu Railway Company, the WMR, by the Baldwin Locomotive Works in 1885, 1891, and 1901. Previously the N class designation had been applied between 1877 and 1879 to Lady Mordaunt, a member of the B class of 1874.

NZR N<sup>C</sup> class

The NZR NC class was a class of two steam locomotives built by Baldwin Locomotive Works built for service on New Zealand's private Wellington and Manawatu Railway (WMR). They did not acquire their NC classification until the publicly owned New Zealand Railways Department (NZR) purchased the WMR and its locomotive fleet.

NZR O<sup>A</sup> class

The OA class is a solitary steam locomotive built by the Baldwin Locomotive Works for the Wellington and Manawatu Railway (WMR) in New Zealand. Ordered in 1894, it entered service in August of that year as No. 13 and was the first narrow gauge Vauclain compound in the world. In 1908, the WMR and its locomotive fleet were purchased by New Zealand Railways Department (NZR) and incorporated into the national rail network, and, although No. 13 bore a likeness to members of the O class, it was sufficiently different that it warranted separate classification. The designation of OA was created and it was numbered OA 457. It operated for another two decades until it was withdrawn in December 1929 in Auckland. The locomotive was known to WMR staff as "The Lady".

NZR O<sup>C</sup> class

The OC class, built by the Baldwin Locomotive Works for the Wellington and Manawatu Railway (WMR) in New Zealand, consists of a solitary steam locomotive. Ordered in 1896 as an externally similar but more powerful version of the OA class locomotive ordered in 1894, it entered service in June 1897 as No. 16. It was a Vauclain compound locomotive.

<span class="mw-page-title-main">NZR P class (1885)</span>

The P class was a class of steam locomotives built to haul freight trains on the national rail network of New Zealand. The class consisted of ten individual locomotives ordered from the British company of Nasmyth, Wilson and Company in 1885, but miscommunications about the weight limitations imposed on the locomotives meant they did not start work until 1887. This debacle came at a time when the New Zealand Railways Department (NZR) was suffering from a lack of motive power to work on its rapidly expanding network and was part of what prompted a shift towards American and home-grown manufacturers.

<span class="mw-page-title-main">NZR E class (1906)</span>

The New Zealand E class locomotive comprised a single Mallet steam locomotive operated by New Zealand Railways (NZR) from 1906 until 1917. Classified as E 66 and nicknamed Pearson's Dream after its designer, it was an experimental Mallet locomotive designed to work on the Rimutaka Incline. The "E" classification was previously used by the Double Fairlie E class of 1872-75, but the classification was free as they had all been withdrawn by the time E 66 entered service. After the withdrawal of E 66, "E" was again re-used on the battery-electric E class of 1922. It was the only Mallet locomotive to operate for the NZR

<span class="mw-page-title-main">NZR E class (1872)</span>

The NZR E class of Double Fairlie steam locomotives were two different types of Fairlie steam locomotives, used on New Zealand's railway network.

<span class="mw-page-title-main">NZR P class (1876)</span>

The NZR P class was a class of two 0-6-0ST locomotives built to work on the government-owned national rail network of New Zealand in 1876. They were initially ordered by the Otago Provincial Council, but they were soon incorporated into the national locomotive fleet when the provinces were abolished. Other examples of the P class were built for industrial service and never came under the ownership of the New Zealand Railways Department, though one worked on the Kaitangata Line.

<span class="mw-page-title-main">NZR B class (1899)</span>

The NZR B class of 1899 was a class of steam locomotives that operated on New Zealand's national rail network. An earlier B class of Double Fairlies had entered service in 1874, but as they had departed from the ownership of the New Zealand Railways (NZR) by the end of 1896, the B classification was free to be re-used. Despite early difficulties, they were amongst NZR's most influential designs.

NZR B<sup>C</sup> class

The BC class comprised a single steam locomotive that operated on New Zealand's national rail network. Built for the Wellington and Manawatu Railway (WMR) and classified as No. 17, it passed into the ownership of the New Zealand Railways Department (NZR) when the government purchased the WMR in December 1908, and it was then that it acquired the BC classification as BC 463.

NZR L<sup>A</sup> class

The NZR LA class was a class of 4-4-0T steam locomotives used by the New Zealand Railways Department and the New Zealand Midland Railway Company. They were built by Nasmyth, Wilson and Company in 1887 for New Zealand Midland Railway Company, and were taken over by NZR in 1900, when the government acquired the incomplete Midland line. The designation also applies to the NZR 4-4-0Trebuilds of the Avonside L class of 1875 which were later reclassified LB after being rebuilt as 4-4-2Ts.

<span class="mw-page-title-main">NZR R class</span>

The NZR R class was a class of early 0-6-4T single Fairlie steam locomotives operated by New Zealand's Railways Department (NZR) between 1879 and 1936.

<span class="mw-page-title-main">NZR D class (1874)</span>

NZR D class steam tank locomotives operated on New Zealand's national railway network. The first entered service in 1874 all had been withdrawn by the end of 1927, which allowed the D classification to be used again in 1929.

<span class="mw-page-title-main">NZR S class</span> Class of New Zealand 0-6-4T single Fairlie locomotives

The NZR S class was a class of seven 0-6-4T single Fairlie steam locomotives operated by New Zealand's Railways Department (NZR) between 1882 and 1927.

NZR F<sup>A</sup> class

The NZR FA class was a class of tank steam locomotives that was built as a larger version of the NZR F class 0-6-0T. The requirements were for larger water and coal capacity on a locomotive that could handle grades better than the F class. Due to costs involved in producing new machines, NZR chose to rebuild existing machines with larger coal and water capacity, larger boiler and firebox, higher boiler pressure and larger diameter pistons. Seven F class engines were rebuilt between 1892 and 1897. Another seven were built new, one at Newmarket Workshops in 1896 and six at Addington Workshops in 1902–03.

<span class="mw-page-title-main">NZR L class</span>

The NZR L class were a series of ten small tank engines built in England for the New Zealand Railways Department (NZR) during the early years of the development of New Zealand's railway network.

References

Citations

  1. Palmer & Stewart 1965, p. 33.
  2. 1 2 Millar 2011.
  3. Sean Millar, From A to Y Avoiding I: 125 Years of Railway Motive Power Classification in New Zealand (self-published, 2001, ISBN   0-908726-28-7), 13-14 and 59.
  4. 1 2 New Zealand Railways Steam Locomotives, "B Class 0-4-4-0T Register", accessed 24 January 2008.
  5. New Zealand Railways Steam Locomotives, "Class B Double Fairlie 0-4-4-0T" accessed 24 January 2008.

Bibliography