NZR J class (1939)

Last updated

NZR J class
J1211 Napier 20Oct2002 JChristianson.jpg
J 1211 being serviced before departure from Napier in 2002.
Type and origin
Power typeSteam
Builder North British Locomotive Company, Scotland
Serial number24523–24562 [1]
Build date1939
Specifications
Configuration:
   Whyte 4-8-2
Gauge 3 ft 6 in (1,067 mm)
Wheel diameter54 in (1.372 m)
Wheelbase 34 ft 10 in (10.62 m)
Length66 ft 11 in (20.40 m)
Adhesive weight 44.45 long tons (45.16  t; 49.78 short tons)
Loco weight68.55 long tons (69.65  t; 76.78 short tons)
Tender weight40.35 long tons (41.00  t; 45.19 short tons)
Total weight108.9 long tons (110.6  t; 122.0 short tons)
Fuel type Coal (J). Oil (JB) [n 1]
Fuel capacity6.0 long tons (6.1  t; 6.7 short tons)
Water cap.4,000 imp gal (18,000 L; 4,800 US gal)
Firebox:
  Grate area39.0 square feet (3.6 m2)
Boiler pressure200 psi (1,400 kPa)
Heating surface1,469 square feet (136.5 m2)
Superheater:
  Heating area283 square feet (26.3 m2)
Cylinders 2
Cylinder size 18 in × 26 in (457 mm × 660 mm)
Valve gear Baker
Performance figures
Tractive effort 24,960  lbf (111.0  kN)
Career
Number in class40
Numbers1200 - 1239
LocaleAll of New Zealand
First run1939 - 1940
Last run1964 - 1967
Retired1964 - 1971
Scrapped1969 - 1971
Current owner Ian Welch, Steam Incorporated
DispositionThree preserved, twelve rebuilt as JB class, remainder scrapped.

The NZR J class was a class of forty 4-8-2 steam locomotives operated by the New Zealand Railways Department (NZR). Although designed to work on the lighter secondary lines, the class was frequently used on mainline express passenger trains as well as freight. [2] When first introduced, the class boasted distinctive streamlining, which was later removed from 1947 onwards for maintenance reasons. [2] Three of this class remained in service until the end of steam operation on 26 October 1971, when they were withdrawn and entered into preservation. This class should not be confused with the earlier J class from 1874.

Contents

Introduction

The J class was primarily designed to be a mixed traffic locomotive that was more powerful than the AB class, being capable of running on the lighter secondary lines while also being able to operate express passenger trains on main routes, which were at the time operated by the larger K class locomotives and the in-production KA and KB classes.

As the NZR workshops were already busy with the production of the KAs and KBs, the North British Locomotive Company was commissioned to build 40 of these locomotives. [3]

The J class incorporated several similar features with the contemporaneous KA and KB classes, such as roller bearing axles, hydrostatic lubrication, and twin Westinghouse brake pumps. They utilised bar frames instead of plate frames and were equipped with Baker Valve gear instead of Walschaerts. They also featured a Vanderbilt tender and were outshopped with distinctive bullet-nosed streamlining that bore a resemblance to the later Norfolk and Western Railway J class from 1941 and the NSWGR 38 class from 1943.

In service

In the early days, the first 30 of the class were allocated to the North Island, while the last 10 were assigned to the South Island to be used on the hilly section between Dunedin and Oamaru. [2] They were immediately put into service on the main trunk routes in both islands to help transport wartime traffic during World War II.

Aside from being used on freight trains, these locomotives were highly suited for high-speed running on the passenger trains of that era. Due to the circumstances brought about by the war, the streamlining became burdensome for maintenance. Also, the skyline casing, which was fitted at the top of the boiler, proved to be a trap for soot from the locomotive's exhaust. Consequently, these began to be removed from some examples of the class, leaving them with just the bullet nose.

The design of the J class was considered a success, prompting NZR to build an improved version, the JA class, at the Hillside workshops starting in 1946. By 1950, enough JA class locomotives had been introduced into service, allowing ten J class locomotives based in the South Island to be transferred to the North Island and join the rest of the class members. At this time, the locomotives lost their streamlining, either all at once during overhaul or after the skyline casing had already been removed. Only the bullet nose was retained, with the headlight moved to the same position as that adopted by the JAs. Around this time, some of the J class locomotives had the twin Westinghouse pumps removed in favor of the Cross-compound pump used by the JAs. Not every J-class engine was fitted with this feature.

JB class

J 1236 (converted during preservation) in Avondale in 2012. Jb1236 (8348247337).jpg
J 1236 (converted during preservation) in Avondale in 2012.

After World War II, the railways in New Zealand faced problematic coal shortages, particularly in the North Island. To address this issue, twelve members [1] of the J class were converted into oil burners as heavy fuel oil was abundantly available at that time.

The conversion process involved installing a two-nozzle burner in the firebox, removing the grate and ashpan, and replacing them with a firepan lined with bricks. Additionally, the superheater tubes in the boiler were shortened, the spark arrester in the smokebox was removed, and the brick arch was taken out. The conversion also required the addition of related controls and gauges for the oil-burning equipment, and modifications to their Vanderbilt tenders to carry an oil bunker and associated steam piping. Similar to the K and KA classes that were also converted to oil burners at that time, these tenders utilised a separate, removable tank that sat in the former coal space. The full-width coal bunker was cut down so that the oil tank was visible at the sides, with distinctive vertical supports below. The conversion process generally coincided with the removal of the streamlining, but not always.

Once converted, the locomotives were re-classified as JB, but they retained their original J class numbers. Although the locomotives performed well, they did not distinguish themselves above the unconverted J class or any of the other J class variants. Some received cross-compound Westinghouse pumps in place of the twin single-phase pumps, but others did not. They only ever saw service in the North Island since coal supplies were abundant in the South Island. Some years after the conversion to oil, the fuel oil became considerably more expensive than the coal supplies that were then sourced, and there was no longer a coal shortage. Nevertheless, the conversion back to coal burning did not occur due to objections from the various railway unions.

Withdrawal and disposal

Several locomotives of the JB class were among the first J 4-8-2 types to be withdrawn due to faster wear and tear resulting from oil burning. Of the North Island J locomotives, the last of the JBs were withdrawn by December 1967, while 4 of the JAs remained in reserve until March 1968, when they were stripped for reusable parts in the South Island, including boilers. [4] The coal-burning J class lasted longer in service, with the last three members of the class receiving A-grade overhauls at Hillside in 1967. North Island JA boilers were approved for refitting to the J class in mid and late that year. [5]

In 1964, J 1212, one of the West Coast J class locomotives, was reboilered with the boiler taken from the first North Island JA to be withdrawn. [6] The last three Js to receive A-grade overhauls in 1967 were 1211 (reboilered with a spare North British JA boiler supplied in 1953, which had been used on JB 1230 from 1959 until it was scrapped in 1964), 1234, and 1236. These locomotives were frequently used on the South Island Limited in 1968 and 1969, on train 143 out of Christchurch and train 144 return of the Oamaru-Christchurch leg. They continued to be used until November 1970, when diesel-hauled Southerner replaced them. These locomotives were also used on the twice-weekly overnight weekend, a passenger and fast freight combined service, which required longer than scheduled stops for freight shunting and mail handling.

By mid-1970, only JA 1267 remained in good condition, with three J and two other JA locomotives in acceptable condition. The number of A-grade overhauls intended to cover four years of J/JA operation by the end of 1967 should easily have covered the requirements of the South Island Limited by the end of 1970. Still, after the end of steam-hauled general freight in South Island in April 1969, general maintenance and resources were significantly reduced. The delayed arrival of the North Island Silver Star carriages from Japan by a year meant that steam heat vans, which allowed diesel to operate night trains, would not be available until late 1971. [7] Half a dozen other JAs remained usable but in dubious condition for use on the weekend 189/190 until the end of steam on 26 October 1971.

Preservation

J 1234 in Avondale, Auckland. J1234 at Avondale (35718625414).jpg
J 1234 in Avondale, Auckland.

Three of the J-class locomotives have been preserved:

None of the original JB class locomotives have been preserved, although a tender from JB 1203 is currently held by Steam Incorporated.

Related Research Articles

<span class="mw-page-title-main">NZR F class</span>

The New Zealand F class was the first important class of steam locomotive built to operate on New Zealand's railway network after the national gauge of 3 ft 6 in was adopted. The first locomotives built for the new gauge railways were two E class double Fairlies for the Dunedin and Port Chalmers Railway Company. The F class was the first class ordered by the central government, and between 1872 and 1888, a total of eighty-eight members of the class were constructed.

NZR A<sup>B</sup> class

The NZR AB class was a class of 4-6-2 Pacific tender steam locomotive that operated on New Zealand's national railway system for New Zealand Railways (NZR). Originally an improvement on the 1906 A class, 141 were built between 1915 and 1927 by NZR's Addington Workshops, A & G Price of Thames, New Zealand, and North British Locomotive Company, making the AB class the largest class of steam locomotives ever to run in New Zealand. An additional eleven were rebuilt from the tank version of the AB – the WAB class – between 1947 and 1957. Two North British-made locomotives were lost in the wreck of the SS Wiltshire in May 1922.

NZR A<sup>A</sup> class

The NZR AA class consisted of ten steam locomotives built by Baldwin Locomotive Works in 1914 to an order by Chief Mechanical Engineer, H. H. Jackson for operation on New Zealand's national rail network.

<span class="mw-page-title-main">New Zealand DJ class locomotive</span>

The New Zealand DJ class locomotive is a type of diesel-electric locomotive in service on the New Zealand rail network. The class were built by Mitsubishi Heavy Industries and introduced from 1968 to 1969 for the New Zealand Railways Department (NZR) with a modernisation loan from the World Bank to replace steam locomotives in the South Island, where all of the class members worked most of their lives. Nine of the locomotives remain in use, mainly with Dunedin Railways.

<span class="mw-page-title-main">NZR B class (1899)</span>

The NZR B class of 1899 was a class of steam locomotives that operated on New Zealand's national rail network. An earlier B class of Double Fairlies had entered service in 1874, but as they had departed from the ownership of the New Zealand Railways (NZR) by the end of 1896, the B classification was free to be re-used. Despite early difficulties, they were amongst NZR's most influential designs.

NZR B<sup>A</sup> class

The BA class was a class of steam locomotive built by the New Zealand Railways Department (NZR) for use on New Zealand's national rail network. The first BA entered service in November 1911, with the last of the 11 class members introduced on 14 May 1913.

NZR B<sup>B</sup> class

The NZR BB class of steam locomotives comprised 30 engines operated by the New Zealand Railways (NZR) in the North Island of New Zealand. Ordered to replace smaller locomotives of several classes in the North Island, they were similar in design and appearance to the preceding B and BA classes. The first BB class locomotive entered service in February 1915, with the last to commence operations doing so on 8 March 1917. All were built by A & G Price Ltd of Thames, New Zealand, and as their cylinders had a larger diameter than the B and BA locomotives they were capable of generating more power to haul heavier trains. The most visible difference however was the roundtop firebox in place of the preceding classes Belpaire design. The BB class could haul up to 700 long tons of freight on a level railway line, though they were limited to a top speed of around 40 mph (64 km/h).

NZR W<sup>AB</sup> class

The NZR WAB class locomotives were steam locomotives designed, built and used by New Zealand Railways Department (NZR). Their wheel arrangement is described by the Whyte notation 4-6-4T. The locomotives were designed by NZR chief draughtsman S.H. Jenkinson as tank versions of the AB class 4-6-2 Pacific locomotive. Initially, the locomotives were separated into two classes, designated WAB for mainline work and WS for suburban work.

<span class="mw-page-title-main">New Zealand Railways Department</span> Government agency (1880–1982)

The New Zealand Railways Department, NZR or NZGR and often known as the "Railways", was a government department charged with owning and maintaining New Zealand's railway infrastructure and operating the railway system. The Department was created in 1880 and was corporatised on 1 April 1982 into the New Zealand Railways Corporation. Originally, railway construction and operation took place under the auspices of the former provincial governments and some private railways, before all of the provincial operations came under the central Public Works Department. The role of operating the rail network was subsequently separated from that of the network's construction. From 1895 to 1993 there was a responsible Minister, the Minister of Railways. He was often also the Minister of Public Works.

<span class="mw-page-title-main">Glenbrook Vintage Railway</span> Heritage railway operating in New Zealand

The Glenbrook Vintage Railway (GVR) is a heritage steam railway in Glenbrook, New Zealand.

NZR J<sup>A</sup> class

The NZR JA class was a class of fifty-one 4-8-2 steam locomotives operated by the New Zealand Railways Department (NZR). The locomotives were built in two batches; the first batch was constructed in-home at the Hillside Workshops at Dunedin between 1946 and 1956, while the second batch was produced by the North British Locomotive Company (NBL) of Glasgow, Scotland in 1951. To differentiate between the two batches, the locomotives were identified by their builder.

<span class="mw-page-title-main">NZR K class (1932)</span>

The NZR K class of 1932 was a class of mixed traffic 4-8-4 steam locomotives built by the New Zealand Railways Department (NZR) that operated on New Zealand's railway network. The locomotives were developed following the failure of the G class Garratt locomotives. The class should not be confused with the much earlier K class of 1877-78, the first American-built engines to arrive in New Zealand.

<span class="mw-page-title-main">NZR G class (1928)</span> Type of Garratt locomotives used in New Zealand

The NZR G class was a type of Garratt locomotives used in New Zealand, later rebuilt as Pacific type locomotives. They were the only Garratt type steam locomotives ever used by the New Zealand Railways (NZR). They were ordered to deal with traffic growth over the heavy gradients of the North Island Main Trunk (NIMT) and to do away with the use of banking engines on steep grades. They were one of the few Garratt designs to employ six cylinders. A mechanical stoker was used to feed coal into the locomotive. The locomotives lasted longer in rebuilt form as standard Pacific locomotives than they did as Garratts, but their numerous mechanical issues lead to their final withdrawal following a union ban on their use in 1956.

NZR K<sup>A</sup> class

The NZR KA class of 1939 was a class of mixed traffic 4-8-4 steam locomotives that operated on New Zealand's railway network. They were built after the success of the K class to meet the increasing traffic demands of the New Zealand Railways Department. The locomotives first appeared with distinctive streamlining, mainly to hide their ACFI feedwater heater systems.

NZR W<sup>F</sup> class Class of 41 New Zealand 2-6-4T locomotives

The NZR WF class were steam locomotives designed, built and used by New Zealand Railways (NZR). Their wheel arrangement is described by the Whyte notation 2-6-4T and the first members of the class entered service in 1904. The locomotives were tank engines designed by the Railways Department's Chief Mechanical Engineer A. L. Beattie, and were mainly built for suburban duties such as those between Christchurch and Lyttelton. They also saw main-line service in the Taranaki region, but most of the class members were assigned to branch line and local services throughout the country. Two were experimentally converted to oil burners in 1909-1910. The tests were satisfactory, but as coal was much cheaper than oil at the time, no further conversions took place.

NZR K<sup>B</sup> class

The NZR KB class of 1939 was a class of six mixed traffic steam locomotives built for New Zealand Railways Department (NZR), that operated on New Zealand's railway network. After the success of the K class, the KB class were built to meet the increasing traffic demands on the Midland Line in the South Island. The locomotives had a wheel arrangement of 4-8-4 and first appeared with distinctive streamlining, mainly to hide their ACFI feedwater systems.

<span class="mw-page-title-main">Oil burner (engine)</span> Steam engine that uses oil as fuel

An oil burner engine is a steam engine that uses oil as its fuel. The term is usually applied to a locomotive or ship engine that burns oil to heat water, to produce the steam which drives the pistons, or turbines, from which the power is derived.

<span class="mw-page-title-main">Victorian Railways J class (1954)</span>

The Victorian Railways J class was a branch line steam locomotive operated by the Victorian Railways (VR) between 1954 and 1972. A development of the successful Victorian Railways K class 2-8-0, it was the last new class of steam locomotive introduced on the VR. Introduced almost concurrently with the diesel-electric locomotives that ultimately superseded them, the locomotives were only in service for a relatively short time.

NZR U<sup>C</sup> class

The NZR UC class were a group of ten 4-6-0 steam locomotives obtained from Scottish builders Sharp, Stewart and Company for New Zealand Railways (NZR). Essentially they were developments of the firm's previous batch of 4-6-0s' for NZR.

NZR W<sup>W</sup> class Class of 50 (+14) New Zealand 4-6-4T locomotives

The New Zealand WW class was a class of 4-6-4T tank locomotives that operated on the New Zealand national railway network. They were built for New Zealand Railways Department (NZR), and were the final development of the six-coupled tank engine in New Zealand, the penultimate class of tank locomotives to be built for NZR, and the first class of tank locomotives to be built with superheaters.

References

Footnotes

  1. Oil-burning J class locomotives were classified JB. Restored J class locomotive 1211 Gloria originally burned coal, but was converted to oil-burning during restoration. Oil capacity is 1,350 imp gal (6,100 L; 1,620 US gal).

Citations

  1. 1 2 New Zealand Railways Steam Locomotives, "J Class 4-8-2 Register", accessed 16 October 2023.
  2. 1 2 3 Palmer & Stewart 1965, p. 119.
  3. McGavin 2000, p. 2.
  4. Lloyd 1974, p. 110.
  5. Reports NZR CME 1967 in NZR Archive on JA Maintenance in NZ Archives, Wellington
  6. Lloyd 1974, p. 114-15.
  7. NZR Ch/Du DCME assessment marginal status of remaining J/Jas other 1267 in May-June 1967, in NZR archives in NZ National Archives
  8. Cavalcade125 1988, p. 11.
  9. Moffatt 2004.

Bibliography

  • Barry, Colin; Brouwer, John; Dash, Colin; Dickenson, Peter; Shalders, Bruce (1988). Cavalcade 125. Ferrymead 125 Committee. Retrieved 22 March 2019.
  • Lloyd, W. G. (1974). Register of New Zealand Railways Steam Locomotives 1863-1971 (2nd ed.). ISBN   0-9582072-1-6.
  • McGavin, T.A. (2000). How North British Built the NZR's J Class Locomotives. New Zealand Railway and Locomotive Society. ISBN   0-908573-77-4.
  • Millar, Sean (2011). The NZR Steam Locomotive. Wellington: New Zealand Railway and Locomotive Society. ISBN   978-0-908573-89-9.
  • Moffatt, Graeme (2004). The Locomotives of the Mainline Steam Trust. Mainline Steam Heritage Trust.
  • Palmer, A. N.; Stewart, W. W. (1965). Cavalcade of New Zealand Locomotives. Wellington: A H. & A W. Reed. ISBN   978-0-207-94500-7.
  • Stewart, W. W. (1974). When Steam was King. Wellington: A. H. & A. W. Reed Ltd. ISBN   978-0-589-00382-1.