| Kallithea | |
|---|---|
 | |
| Role | Autogyro |
| National origin | Bulgaria |
| Manufacturer | Niki Rotor Aviation |
| Introduction | 2011 |
| Status | In production (2017) |
| Produced | 2011-present |
| Developed from | Niki Lightning |
The Niki Kallithea (the best view) is a Bulgarian autogyro designed and produced by Niki Rotor Aviation of Pravets, introduced in 2011. The aircraft is supplied complete and ready-to-fly. [1] [2]
The Kallithea is a development of the 2009 Niki Lightning, differing mainly in its use of a conventional two-tube tail boom that passes under the pusher propeller instead of mounting the tail boom through the propeller hub.
The Kallithea features a single main rotor, a two-seats-in tandem enclosed cockpit with fold-up doors, tricycle landing gear and a four-cylinder, liquid and air-cooled, four stroke 100 hp (75 kW) Rotax 912 or six-cylinder, liquid cooled side-valve four-stroke flat six 4-litre petrol 120 hp (89 kW) D-Motor LF39 aircraft engine in pusher configuration. The doors can also be removed for flight. [1]
The aircraft fuselage is a monocoque structure made from composites and fibreglass. Its two-bladed Vortech or Sport Copter rotor has a diameter of 8.5 m (27.9 ft) and a chord of 21 cm (8.3 in). The aircraft has a typical empty weight of 250 kg (551 lb) and a gross weight of 450 kg (992 lb), giving a useful load of 200 kg (441 lb). With full fuel of 80 litres (18 imp gal; 21 US gal) the payload for the pilot, passenger and baggage is 143 kg (315 lb). [1]
Data from Tacke [1]
General characteristics
Performance
The Club ULM Rotor Ptenets-2 is a Russian ultralight aircraft, designed and produced by Club ULM Rotor of Kumertau, Bashkortostan. The aircraft is supplied complete and ready-to-fly.
The Air Copter A3C is a French autogyro, designed and produced by Air Copter of Lherm, Haute-Garonne. The aircraft is supplied as a kit for amateur construction.
The AutoGyro MT-03 is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft.
The ELA 07 is a series of Spanish autogyros, designed and produced by ELA Aviación of Córdoba, Andalusia. The aircraft are supplied complete and ready to fly.
The Trixy G 4-2 R is an Austrian autogyro, designed and produced by Trixy Aviation Products of Dornbirn. The aircraft was introduced at the Aero show held in Friedrichshafen in 2011 and when it was available it was supplied as a complete ready-to-fly-aircraft.
The Niki Lightning is a fully enclosed two-seater tricycle autogyro of composite construction, designed and built by Niki Rotor Aviation in Bulgaria. It was introduced in 2009
The ELA Aviation ELA 10 Eclipse is a Spanish, two-seat, enclosed autogyro, designed and built by ELA Aviación of Córdoba, Andalusia, introduced at the AERO Friedrichshafen airshow in 2014. The aircraft is supplied complete and ready-to-fly.
The Aviomania G2SA Genesis Duo is a Cypriot autogyro designed in 2007 by Nicolas Karaolides and produced by Aviomania of Larnaca. The aircraft is supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.
The Aviomania G1SA Genesis Solo is a Cypriot autogyro that was designed by Nicolas Karaolides and produced by Aviomania of Larnaca. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.
The DTA J-RO (transl. gyro) is a French autogyro designed and produced by DTA sarl of Montélimar. The aircraft is supplied complete and ready-to-fly.
The ELA 09 Junior is a Spanish autogyro designed and produced by ELA Aviación of Córdoba, Andalusia, introduced in the mid-2010s. The aircraft is supplied complete and ready-to-fly.
The Freewind Bumble B (transl. Bumblebee) is a French autogyro that was designed and produced by Freewind Aviation of Vimory, introduced in about 2013. Now out of production, when it was available the aircraft was supplied complete and ready-to-fly.
The Guépard II XJ01 (transl. Cheetah) is a Belgian autogyro that was designed by Joel Tilquin and produced by Guépard II Team of Boncelles, first flown on 28 May 2009 at the Bois-de-la-Pierre fly-in. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Titanium Explorer is an Australian autogyro designed by Neil Sheather and Andrew Pepper and produced by Titanium Auto Gyro of Attunga, New South Wales. The aircraft is supplied complete and ready-to-fly, although development of a kit for amateur construction was underway in 2015.
The Trixy Trixformer is an Austrian roadable aircraft autogyro/electric motorcycle designed and produced by Trixy Aviation Products of Dornbirn, introduced in 2014. The vehicle is supplied complete and ready-to-fly.
The Trixy Princess is an Austrian autogyro designed and produced by Trixy Aviation Products of Dornbirn. The aircraft is supplied complete and ready-to-fly.
The EDM Aerotec CoAX 2D/2R is a series of German coaxial main rotor helicopters designed and produced by EDM Aerotec of Geisleden. The aircraft is supplied complete and ready-to-fly.
The P&M Explorer is a British ultralight trike that was designed and produced by P&M Aviation of Rochdale, Lancashire. Now out of production, when it was available it was supplied complete and ready-to-fly.
The Sunward ST is a Chinese ultralight trike designed and produced by Sunward Tech of Zhuzhou. The aircraft is supplied complete and ready-to-fly.
The Sunward STB is a Chinese amphibious ultralight trike, designed and produced by Sunward Tech of Zhuzhou. The aircraft is supplied complete and ready-to-fly.