Nose flute

Last updated
Nose flute
NoseFlute.jpg
Fijian girl playing nose flute.
Woodwind instrument
Classification Woodwind
Hornbostel–Sachs classification 421.111.12
(The player creates a ribbon-shaped stream of air (in this case with nose) through a tube with fingerholes.)
DevelopedUnknown where flutes developed; Asia and Europe have bone flutes thousands of years old. Nose flutes spread in Polynesian and Pacific Rim countries and Africa.
Fijian nose flute 1838 MHNT Flute nasale MHNT ETH AC FI 47 Gaston de Roquemaurel.jpg
Fijian nose flute 1838 MHNT

The nose flute is a musical instrument often played in Polynesia and the Pacific Rim countries. Other versions are found in Africa.

Contents

Hawaii

In the North Pacific, in the Hawaiian islands the nose flute was a common courting instrument. In Hawaiian, it is variously called hano, "nose flute", [1] by the more specific term ʻohe hano ihu, "bamboo flute [for] nose," or ʻohe hanu ihu, "bamboo [for] nose breath". [2]

It is made from a single bamboo section. According to Arts and Crafts of Hawai`i by Te Rangi Hiroa, old flutes in the Bishop Museum collection have a hole at the nose area for the breath, and two or three fingering holes. In the three-finger-hole specimen, one fingering hole is placed near the breath hole. Lengths range from 10–21 inches (250–530 mm).

Oral tradition in various families states that numbers of fingering holes ranged from one to four, and location of the holes varied depending on the musical taste of the player. Though primarily a courting instrument played privately and for personal enjoyment, it also could be used in conjunction with chants, song, and hula. Kumu hula (dance masters), were said to be able to either make the flute sound as though it were chanting, or to chant as they played. [3] Kumu hula Leilehua Yuen is one of the few contemporary Hawaiian musicians to perform with the nose flute in this manner.[ citation needed ]

Africa

In the Congo, the nose flute is played by eight ethnic groups. [4]

Philippines

In the Philippines, the nose flute (pitung ilong in Tagalog), or the kalaleng of the northern Bontok people (tongali among the Kalinga people), is played with the extreme forward edge of the right or left nostril. Because the kalaleng is long and has a narrow internal diameter, it is possible to play different harmonics through overblowingeven with the rather weak airflow from one nostril. Thus, this nose flute can play notes in a range of two and a half octaves. Finger holes in the side of the bamboo tube change the operating length, giving various scales. Players plug the other nostril to increase the force of their breath through the flute.[ citation needed ]

Taiwan

Bamboo nose flute played by Paiwan people 09.16 [Di Si Jie Guo Jia Wen Hua Zi Chan Bao Cun Jiang ] Ban Jiang Dian Li ,You [Pai Wan Yuan Yin ] Biao Yan Jie Mu Kai Chang  (36417324374).jpg
Bamboo nose flute played by Paiwan people

In Southern Taiwan, Paiwan people play twin-pipes nose flute. They also play twin-pipes mouth flute.

New Zealand

Nguru from New Zealand Nguru.jpg
Nguru from New Zealand

Historically in New Zealand, the Māori carved nguru from wood, the stem of a gourd and whale's teeth. Nguru were often adorned with very elaborate carvings, befitting what is considered a sacred object. Although Nguru are commonly known as nose flutes, it is only the smaller instruments that can be played with the nose, more commonly Nguru are played with the mouth.

The Māori kōauau ponga ihu, a gourd nose flute, was also part of the nose flute tradition; note that a similarly constructed gourd nose flute, ipu ho kio kio was also used in Hawaii. The maker would form a nose hole in the neck (or stem) of the gourd, by cutting off the neck at a fairly small cross section. This small hole is placed under the player's nostril, in order to generate the flute-tone. The "kōauau ponga ihu" functions as an ocarina in its acoustic principles. Several notes of a scale can be obtained by drilling fingerholes into the "bowl" of the gourd.

Tonga

A variation, the 'Fangufangu' nose flute of the island of Tonga is made with intact node walls at both ends of the bamboo tube, with the nostril holes on the side in front of the nodes (along with side finger holes) and a hole in the middle of the tube, acting as a vent hole, and taking the place of the open distal end. Thus the 'Fangufangu' can be played from either end, and the disposition of the fingerholes differ from node to vent hole so two alternating scales can be played, but only one scale at a time.

See also

Notes

  1. Pukui & Elbert 1986
  2. Nona Beamer lectures[ full citation needed ]
  3. Emerson 1965
  4. Grove's Dictionary of Musical Instruments, 1984 edition.[ full citation needed ]

Sources

Related Research Articles

<span class="mw-page-title-main">Flute</span> Brass instrument

The flute is a family of classical music instrument in the woodwind group. Like all woodwinds, flutes are aerophones, meaning they make sound by vibrating a column of air. However, unlike woodwind instruments with reeds, a flute is a reedless wind instrument that produces its sound from the flow of air across an opening. According to the instrument classification of Hornbostel–Sachs, flutes are categorized as edge-blown aerophones. A musician who plays the flute is called a flautist or flutist.

<span class="mw-page-title-main">Recorder (musical instrument)</span> Woodwind instrument

The recorder is a family of woodwind musical instruments in the group known as internal duct flutes: flutes with a whistle mouthpiece, also known as fipple flutes. A recorder can be distinguished from other duct flutes by the presence of a thumb-hole for the upper hand and seven finger-holes: three for the upper hand and four for the lower. It is the most prominent duct flute in the western classical tradition.

<span class="mw-page-title-main">Tin whistle</span> Six-holed woodwind instrument

The tin whistle, also called the penny whistle, is a simple six-holed woodwind instrument. It is a type of fipple flute, putting it in the same class as the recorder, Native American flute, and other woodwind instruments that meet such criteria. A tin whistle player is called a whistler. The tin whistle is closely associated with Irish traditional music and Celtic music. Other names for the instrument are the flageolet, English flageolet, Scottish penny whistle, tin flageolet, or Irish whistle.

The music of Hawaii includes an array of traditional and popular styles, ranging from native Hawaiian folk music to modern rock and hip hop. Styles like slack-key guitar are well known worldwide, while Hawaiian-tinged music is a frequent part of Hollywood soundtracks. Hawaii also made a contribution to country music with the introduction of the steel guitar. In addition, the music which began to be played by Puerto Ricans in Hawaii in the early 1900s is called cachi cachi music, on the islands of Hawaii.

<span class="mw-page-title-main">Hula</span> Polynesian dance

Hula is a Hawaiian dance form accompanied by chant (oli) or song (mele). It was developed in the Hawaiian Islands by the Native Hawaiians who originally settled there. The hula dramatizes or portrays the words of the oli or mele in a visual dance form.

<span class="mw-page-title-main">Bansuri</span> Indian side blown flute, generally bamboo

A bansuri is an ancient side blown flute originating from the Indian subcontinent. It is an aerophone produced from bamboo and metal like material used in Hindustani classical music. It is referred to as nadi and tunava in the Rigveda and other Vedic texts of Hinduism. Its importance and operation is discussed in the Sanskrit text Natya Shastra.

<span class="mw-page-title-main">Chinese flutes</span>

Chinese flutes come in various types. They include

<span class="mw-page-title-main">End-blown flute</span> Woodwind musical instrument

The end-blown flute is a woodwind instrument played by directing an airstream against the sharp edge of the upper end of a tube. Unlike a recorder or tin whistle, there is not a ducted flue voicing, also known as a fipple. Most rim-blown flutes are "oblique" flutes, being played at an angle to the body's vertical axis. A notched flute is an end-blown flute with a notch on the blowing surface. A lip-valley flute is a type of notched flute.

Māhū in Native Hawaiian and Tahitian cultures are third gender people with traditional spiritual and social roles within the culture, similar to Tongan fakaleiti and Samoan fa'afafine. Historically māhū were assigned male at birth (AMAB), but in modern usage māhū can refer to a variety of genders and sexual orientations.

The atenteben(atɛntɛbɛn) is a bamboo flute from Ghana. It is played vertically, like the European recorder, and, like the recorder, can be played diatonically as well as chromatically. Although originally used as a traditional instrument, beginning in the 20th century it has also been used in contemporary and classical music. Several players have attained high levels of virtuosity and are able to play Western as well as African music on the instrument.

<span class="mw-page-title-main">Ipu</span>

Ipu is a percussion instrument made from gourds that is often used to provide a beat for hula dancing.

<span class="mw-page-title-main">Kōauau</span> Flute of the Maori people of New Zealand

A kōauau is a small flute, ductless and notchless, four to eight inches long, open at both ends and having from three to six fingerholes placed along the pipe.

A kalaleng is a nose flute made from bamboo from the Philippines.

Margaret Maiki Souza Aiu Lake was a hula dancer, kumu hula, hula teacher, and influential figure in the second Hawaiian Renaissance because of her revolutionary teaching techniques. Because of her work she was recognized as the "Mother of Hawaiian Renaissance." Many of her students became teachers themselves making her the "most important hula teacher of the 20th century."

<span class="mw-page-title-main">Taonga pūoro</span> Māori traditional musical instruments

Taonga pūoro are the traditional musical instruments of the Māori people of New Zealand.

<span class="mw-page-title-main">Vessel flute</span> Vessel-shaped flute

A vessel flute is a type of flute with a body which acts as a Helmholtz resonator. The body is vessel-shaped, not tube- or cone-shaped; that is, the far end is closed.

ʻUlīʻulī are Hawaiian feathered gourd rattles that are occasionally used as instruments in the traditional Hawaiian dance, hula. This instrument is used in both ʻauana and kahiko hula dances. They are vibrantly colored feather gourd rattles used in kahiko performances to maintain timing and to enhance other sounds like chanting or the pounding of an ipu.

<span class="mw-page-title-main">Calvin Hoe</span> Hawaiian artisan, musician, and activist

Calvin Hoe is a Hawaiian artisan, musician, restaurant owner, educator, and activist.