Peak expiratory flow

Last updated
Peak expiratory flow
Peak flow meter horiz.jpg
A peak flow meter issued in Europe.
MeSH D010366

The peak expiratory flow (PEF), also called peak expiratory flow rate (PEFR) and peak flow measurement, [1] is a person's maximum speed of expiration, as measured with a peak flow meter, a small, hand-held device used to monitor a person's ability to breathe out air. It measures the airflow through the bronchi and thus the degree of obstruction in the airways. Peak expiratory flow is typically measured in units of liters per minute (L/min).

Contents

Function

Peak flow meter (made in USA) Peak flow meter.jpg
Peak flow meter (made in USA)

Peak flow readings are higher when patients are well, and lower when the airways are constricted. From changes in recorded values, patients and doctors may determine lung functionality, the severity of asthma symptoms, and treatment.

Measurement of PEFR requires training to correctly use a meter and the normal expected value depends on the patient's sex, age, and height. It is classically reduced in obstructive lung disorders such as asthma.

Due to the wide range of 'normal' values and the high degree of variability, peak flow is not the recommended test to identify asthma. However, it can be useful in some circumstances.

A small portion of people with asthma may benefit from regular peak flow monitoring. When monitoring is recommended, it is usually done in addition to reviewing asthma symptoms and frequency of reliever medication use. [2]

When peak flow is being monitored regularly, the results may be recorded on a peak flow chart.

It is important to use the same peak flow meter every time.

Scales or reference values

Normal values, shown on EU scale. Normal values for peak expiratory flow - EU scale.png
Normal values, shown on EU scale.

To interpret the significance of peak expiratory flow measurements, a comparison is made to reference (normal, predicted) values based on measurements taken from the general population. Various reference values have been published in the literature and vary by population, ethnic group, age, sex, height and weight of the patient. For this reason, tables or charts are used to determine the normal value for a particular individual. More recently, medical calculators have been developed to calculate predicted values for peak expiratory flow. There are a number of non-equivalent scales used in the interpretation of peak expiratory flow. [4]

Some examples of Reference Values are given below. There is a wide natural variation in results from healthy test subjects.

In 2004 the UK switched from the original Wright scale to the newer, more accurate European scale. Wright values may be converted to the EU scale using the following formula: [9]

The reverse calculation is:

Where is the value in the Wright scale.

These formulas have also been trended over time in both rural and metropolitan areas both as air quality studies and as studies on asthma due to the Peak Flow measurement's accuracy as a predictor of mortality and poor prognosis. [10]

Measurement

Measurements may be based on 1 second or less but are usually reported as a volume per minute. Electronic devices will sample the flow and multiply the sample volume(Litres) by 60, divided by the sample time(seconds) for a result measured in L/minute :

The highest of three readings is used as the recorded value of the Peak Expiratory Flow Rate. It may be plotted out on graph paper charts together with a record of symptoms or using peak flow charting software. This allows patients to self-monitor and pass information back to their doctor or nurse. [11]

Peak flow readings are often classified into 3 zones of measurement according to the American Lung Association; [12] green, yellow, and red. Doctors and health practitioners can develop an asthma management plan based on the green-yellow-red zones.

ZoneReadingDescription
Green Zone80 to 100 percent of the usual or normal peak flow readings are clear.A peak flow reading in the green zone indicates that the asthma is under good control.
Yellow Zone50 to 79 percent of the usual or normal peak flow readingsIndicates caution. It may mean respiratory airways are narrowing and additional medication may be required.
Red ZoneLess than 50 percent of the usual or normal peak flow readingsIndicates a medical emergency. Severe airway narrowing may be occurring and immediate action needs to be taken. This would usually involve contacting a doctor or hospital.

History

The measurement of peak expiratory flow was pioneered by Martin Wright, who produced the first meter specifically designed to measure this index of lung function. Since the original design of instrument was introduced in the late 1950s, and the subsequent development of a more portable, lower cost version (the "Mini-Wright" peak flow meter), other designs and copies have become available across the world. [13]

See also

Related Research Articles

<span class="mw-page-title-main">Mechanical ventilation</span> Method to mechanically assist or replace spontaneous breathing

Mechanical ventilation or assisted ventilation is the medical term for using a machine called a ventilator to fully or partially provide artificial ventilation. Mechanical ventilation helps move air into and out of the lungs, with the main goal of helping the delivery of oxygen and removal of carbon dioxide. Mechanical ventilation is used for many reasons, including to protect the airway due to mechanical or neurologic cause, to ensure adequate oxygenation, or to remove excess carbon dioxide from the lungs. Various healthcare providers are involved with the use of mechanical ventilation and people who require ventilators are typically monitored in an intensive care unit.

<span class="mw-page-title-main">Exhalation</span> Flow of the respiratory current out of an organism

Exhalation is the flow of the breath out of an organism. In animals, it is the movement of air from the lungs out of the airways, to the external environment during breathing. This happens due to elastic properties of the lungs, as well as the internal intercostal muscles which lower the rib cage and decrease thoracic volume. As the thoracic diaphragm relaxes during exhalation it causes the tissue it has depressed to rise superiorly and put pressure on the lungs to expel the air. During forced exhalation, as when blowing out a candle, expiratory muscles including the abdominal muscles and internal intercostal muscles generate abdominal and thoracic pressure, which forces air out of the lungs.

<span class="mw-page-title-main">Spirometry</span> Pulmonary function test

Spirometry is the most common of the pulmonary function tests (PFTs). It measures lung function, specifically the amount (volume) and/or speed (flow) of air that can be inhaled and exhaled. Spirometry is helpful in assessing breathing patterns that identify conditions such as asthma, pulmonary fibrosis, cystic fibrosis, and COPD. It is also helpful as part of a system of health surveillance, in which breathing patterns are measured over time.

<span class="mw-page-title-main">Capnography</span> Monitoring of the concentration of carbon dioxide in respiratory gases

Capnography is the monitoring of the concentration or partial pressure of carbon dioxide (CO
2
) in the respiratory gases. Its main development has been as a monitoring tool for use during anesthesia and intensive care. It is usually presented as a graph of CO
2
(measured in kilopascals, "kPa" or millimeters of mercury, "mmHg") plotted against time, or, less commonly, but more usefully, expired volume (known as volumetric capnography). The plot may also show the inspired CO
2
, which is of interest when rebreathing systems are being used. When the measurement is taken at the end of a breath (exhaling), it is called "end tidal" CO
2
(PETCO2).

A wheeze is a clinical symptom of a continuous, coarse, whistling sound produced in the respiratory airways during breathing. For wheezes to occur, part of the respiratory tree must be narrowed or obstructed, or airflow velocity within the respiratory tree must be heightened. Wheezing is commonly experienced by persons with a lung disease; the most common cause of recurrent wheezing is asthma, though it can also be a symptom of lung cancer, congestive heart failure, and certain types of heart diseases.

Acute severe asthma, also known as status asthmaticus, is an acute exacerbation of asthma that does not respond to standard treatments of bronchodilators (inhalers) and corticosteroids. Asthma is caused by multiple genes, some having protective effect, with each gene having its own tendency to be influenced by the environment although a genetic link leading to acute severe asthma is still unknown. Symptoms include chest tightness, rapidly progressive dyspnea, dry cough, use of accessory respiratory muscles, fast and/or labored breathing, and extreme wheezing. It is a life-threatening episode of airway obstruction and is considered a medical emergency. Complications include cardiac and/or respiratory arrest. The increasing prevalence of atopy and asthma remains unexplained but may be due to infection with respiratory viruses.

Exercise-induced bronchoconstriction (EIB) occurs when the airways narrow as a result of exercise. This condition has been referred to as exercise-induced asthma (EIA), however this term is no longer preferred. While exercise does not cause asthma, it is frequently an asthma trigger.

<span class="mw-page-title-main">Functional residual capacity</span> Volume of air in the lungs at the end of passive expiration

Functional residual capacity (FRC) is the volume of air present in the lungs at the end of passive expiration. At FRC, the opposing elastic recoil forces of the lungs and chest wall are in equilibrium and there is no exertion by the diaphragm or other respiratory muscles.

High-frequency ventilation is a type of mechanical ventilation which utilizes a respiratory rate greater than four times the normal value and very small tidal volumes. High frequency ventilation is thought to reduce ventilator-associated lung injury (VALI), especially in the context of ARDS and acute lung injury. This is commonly referred to as lung protective ventilation. There are different types of high-frequency ventilation. Each type has its own unique advantages and disadvantages. The types of HFV are characterized by the delivery system and the type of exhalation phase.

Lung compliance, or pulmonary compliance, is a measure of the lung's ability to stretch and expand. In clinical practice it is separated into two different measurements, static compliance and dynamic compliance. Static lung compliance is the change in volume for any given applied pressure. Dynamic lung compliance is the compliance of the lung at any given time during actual movement of air.

Occupational asthma is new onset asthma or the recurrence of previously quiescent asthma directly caused by exposure to an agent at workplace. It is an occupational lung disease and a type of work-related asthma. Agents that can induce occupational asthma can be grouped into sensitizers and irritants.

<span class="mw-page-title-main">Obstructive lung disease</span> Category of respiratory disease characterized by airway obstruction

Obstructive lung disease is a category of respiratory disease characterized by airway obstruction. Many obstructive diseases of the lung result from narrowing (obstruction) of the smaller bronchi and larger bronchioles, often because of excessive contraction of the smooth muscle itself. It is generally characterized by inflamed and easily collapsible airways, obstruction to airflow, problems exhaling, and frequent medical clinic visits and hospitalizations. Types of obstructive lung disease include; asthma, bronchiectasis, bronchitis and chronic obstructive pulmonary disease (COPD). Although COPD shares similar characteristics with all other obstructive lung diseases, such as the signs of coughing and wheezing, they are distinct conditions in terms of disease onset, frequency of symptoms, and reversibility of airway obstruction. Cystic fibrosis is also sometimes included in obstructive pulmonary disease.

<span class="mw-page-title-main">Pulmonary function testing</span> Test to evaluate respiratory system

Pulmonary function testing (PFT) is a complete evaluation of the respiratory system including patient history, physical examinations, and tests of pulmonary function. The primary purpose of pulmonary function testing is to identify the severity of pulmonary impairment. Pulmonary function testing has diagnostic and therapeutic roles and helps clinicians answer some general questions about patients with lung disease. PFTs are normally performed by a pulmonary function technician, respiratory therapist, respiratory physiologist, physiotherapist, pulmonologist, or general practitioner.

<span class="mw-page-title-main">Exhaled nitric oxide</span> Breath test for respiratory inflammation

In medicine, exhaled nitric oxide (eNO) can be measured in a breath test for asthma and other respiratory conditions characterized by airway inflammation. Nitric oxide (NO) is a gaseous molecule produced by certain cell types in an inflammatory response. The fraction of exhaled NO (FENO) is a promising biomarker for the diagnosis, follow-up and as a guide to therapy in adults and children with asthma. The breath test has recently become available in many well-equipped hospitals in developed countries, although its exact role remains unclear.

In medicine Imaging Lung Sound Behavior with Vibration Response Imaging (VRI), is a novelty computer-based technology that takes the concept of the stethoscope to a more progressive level. Since the invention of the stethoscope by René-Théophile-Hyacinthe Laennec France in 1816, physicians have been utilizing lung sounds to diagnose various chest conditions. Today auscultation provides physicians with extensive information on the examination of the patient. The skills of the examiner however, vary, as seen in a clinical study that was conducted on the diagnosis of pneumonia in 2004.

<span class="mw-page-title-main">Respiratory inductance plethysmography</span>

Respiratory inductance plethysmography (RIP) is a method of evaluating pulmonary ventilation by measuring the movement of the chest and abdominal wall.

Modes of mechanical ventilation are one of the most important aspects of the usage of mechanical ventilation. The mode refers to the method of inspiratory support. In general, mode selection is based on clinician familiarity and institutional preferences, since there is a paucity of evidence indicating that the mode affects clinical outcome. The most frequently used forms of volume-limited mechanical ventilation are intermittent mandatory ventilation (IMV) and continuous mandatory ventilation (CMV). There have been substantial changes in the nomenclature of mechanical ventilation over the years, but more recently it has become standardized by many respirology and pulmonology groups. Writing a mode is most proper in all capital letters with a dash between the control variable and the strategy.

Dynamic hyperinflation is a phenomenon that occurs when a new breath begins before the lung has reached the static equilibrium volume. In simpler terms, this means that a new breath starts before the usual amount of air has been breathed out, leading to a build-up of air in the lungs, and causing breathing in and out to take place when the lung is nearly full.

Mean airway pressure typically refers to the mean pressure applied during positive-pressure mechanical ventilation. Mean airway pressure correlates with alveolar ventilation, arterial oxygenation, hemodynamic performance, and barotrauma. It can also match the alveolar pressure if there is no difference between inspiratory and expiratory resistance.

A respiratory pressure meter measures the maximum inspiratory and expiratory pressures that a patient can generate at either the mouth (MIP and MEP) or inspiratory pressure a patient can generate through their nose via a sniff maneuver (SNIP). These measurements require patient cooperation and are known as volitional tests of respiratory muscle strength. Handheld devices displaying the measurement achieved in centimetres of water pressure (cmH2O) and the pressure trace created, allow quick patient testing away from the traditional pulmonary laboratory and are useful for ward-based, out-patient and preoperative assessment, as well as for use by pulmonologists and physiotherapists.

References

  1. "Peak Flow Measurement". www.hopkinsmedicine.org. 2019-08-14. Retrieved 2023-06-22.
  2. National Asthma Council of Australia
  3. Nunn, A. J., and I. Gregg. 1989. New regression equations for predicting peak expiratory flow in adults. Br. Med. J. 298: 1068-1070. Adapted by Clement Clarke for use in EU scale - see Peakflow.com > Predictive Normal Values (Nomogram, EU scale)
  4. Martin R. Miller (June 2004). "Peak expiratory flow meter scale changes: implications for patients and health professionals" (PDF). The Airways Journal. 2 (2): 80. Archived from the original (PDF) on 2006-06-25. Retrieved 2006-06-06.
  5. Nunn A, Gregg I (1989). "New regression equations for predicting peak expiratory flow in adults". BMJ. 298 (6680): 1068–70. doi:10.1136/bmj.298.6680.1068. PMC   1836460 . PMID   2497892. - Predicted peak expiratory flow in normal adults using Wright-scale
  6. Godfrey S, Kamburoff PL, Naim JL (1970). "Spirometry, lung volumes and airway resistance in normal children ages 5 to 18". Br J Dis Chest. 64 (1): 15–24. doi:10.1016/S0007-0971(70)80045-6. PMID   5438753. - Predicted peak expiratory flow in normal children using Wright-scale
  7. Clement Clarke International (2004). "Predictive Normal Values (Nomogram, EU scale)". Clement Clarke International. Archived from the original on 2020-07-10. Retrieved 2006-06-06. - Downloadable PDF charts for adults and children using EU scale
  8. J.L. Hankinson, J.R. Odencrantz, and K.B. Fedan, Spirometric Reference Values from a Sample of the General U.S. Population. Am J Respir Crit Care Med, Vol 159, pp. 179-187, 1999.
  9. Clement Clarke International (2004). "Mini-Wright Peak Flow Meter - Wright to EU (EN13826) converter". Clement Clarke International. Archived from the original (EXE macromedia flash) on September 30, 2007. Retrieved 2006-06-06.
  10. Knudson, RJ (1983). "Changes in the normal maximal expiratory flow-volume curve with growth and aging". Am Rev Respir Dis. 127 (6): 725–34. doi:10.1164/arrd.1983.127.6.725 (inactive 31 January 2024). PMID   6859656.{{cite journal}}: CS1 maint: DOI inactive as of January 2024 (link)
  11. Scottish Intercollegiate Guidelines Network; The British Thoracic Society (July 2007). "British Guideline on the Management of Asthma - Annex 8: Personal Asthma Action Plan" (PDF). Thorax. 58: Suppl I. doi:10.1136/thx.58.suppl_1.i83. S2CID   220143006. Archived from the original (PDF) on 2009-01-17. Retrieved 2011-10-27. - for recording chart of PEFR readings
  12. American Lung Association. "How can I determine a normal peak flow rate for me?". Archived from the original on 2007-11-03.
  13. WRIGHT BM, McKERROW CB (November 1959). "Maximum forced expiratory flow rate as a measure of ventilatory capacity: with a description of a new portable instrument for measuring it". Br Med J. 2 (5159): 1041–6. doi:10.1136/bmj.2.5159.1041. PMC   1990874 . PMID   13846051.