Pietenpol Air Camper

Last updated

Air Camper
Pietenpol.air.camper.g-buco.arp.jpg
UK variant Pietenpol Air Camper
Role Amateur-built airplane
ManufacturerPietenpol
DesignerBernie Pietenpol
First flight1928
with Model A engine, May 1929 [1]
StatusPlans available (2015)
Variants Grega GN-1 Aircamper
Pietenpol Sky Scout
St Croix Pietenpol Aerial
St Croix Pietenpol Aircamper
UK variant Pietenpol Air Camper Pietenpol.air.camper.g-buco.onground.arp.jpg
UK variant Pietenpol Air Camper
Air Camper with a Ford Model A engine AirCamper.jpg
Air Camper with a Ford Model A engine
A Pietenpol Air Camper under construction, showing its wooden frame structure. PietenpolAirCamperUncovered.JPG
A Pietenpol Air Camper under construction, showing its wooden frame structure.
"Pinocho", an Air Camper made in Mexico by Miguel Carrillo Ayala in 1935 and now in the Museo Militar de Aviacion. Powered by a 201 CID engine of a Ford Model A. Avion Pinocho (Pietenpol Air Camper)3.jpg
"Pinocho", an Air Camper made in Mexico by Miguel Carrillo Ayala in 1935 and now in the Museo Militar de Aviación. Powered by a 201 CID engine of a Ford Model A.

The Pietenpol Air Camper is a simple parasol wing homebuilt aircraft designed by Bernard H. Pietenpol. The first prototype that became the Air Camper was built and flown by Pietenpol in 1928. [2] [3] [4] [5] [6]

Contents

Development

The Air Camper was designed to be built of spruce and plywood. One of Pietenpol's goals was to create a plane that was affordable and easy to construct for home builders. Building an Air Camper requires basic woodworking skills and tools. Builders also need to fabricate some metal fittings to attach the wooden parts together. Some welding is required. The plans for the Pietenpol Aircamper were originally published in a four-part serial in the "Flying and Glider" Manual of 1932-33. [4] [5]

The original model was flown using an Ace four cylinder water-cooled engine. [4] The Model A Ford engine later became the standard powerplant used; the design was first flown with one in May 1929. [1]

In the 1960s Bernard Pietenpol began to favor converted engines from Chevrolet Corvair automobiles. The Corvair flat six was higher horsepower, smoother, and significantly lighter, compared to the Model A, and was similar to those already available for general aviation use. The length of a Pietenpol varies with the engine choices, as lighter engines needed to be mounted further forward for weight and balance reasons. [7] Over the years over 30 different engines have flown in the Pietenpol Air Camper. Many modern Pietenpol builders prefer Continental A65, C85 or C90 air-cooled flat fours. [4] Several examples of the Aircamper have been built in Europe and in 2012 were still flying.

In the 1920s and 1930s, kits were available for the design, but there were none available again until 2015 when the Pietenpol Aircraft Company introduced a kit version of the Air Camper, with components supplied by Aircraft Spruce & Specialty. The kit includes all parts except the engine, dope, fabric covering, and hardware. [8]

Variants

Pietenpol Sky Scout
BH Pietenpol also designed and published plans for a single-seat version of the aircraft named the Pietenpol Sky Scout, which was slightly smaller and was powered by the Ford Model T engine. [4] During the late 1920s and early 1930s, this was less expensive than the Model A used in the Air Camper. [9]
UK LAA-approved Pietenpol Air Camper
In some countries, civil aviation authority approval is required for each experimental aircraft design, in addition to the approval of each aircraft an individual makes, as in the US. A variant of the Pietenpol Air Camper was designed by Mr. J. K. Wills, and UK Light Aircraft Association approval was obtained for this variant. [10]
Grega GN-1 Aircamper PietenpolAirCamperGN1.JPG
Grega GN-1 Aircamper
Grega GN-1 Aircamper
A plans-only homebuilt design similar to the Air Camper using a Piper Cub wing.
St Croix Pietenpol Aerial
A biplane adaptation, designed by Chad and Charles Willie and produced by St Croix Aircraft of Corning, Iowa, first flown in 1977. [11]
St Croix Pietenpol Aircamper
An adaptation of the original design with more wingspan, longer fuselage and higher gross weight. [11]

Specifications (Typical Air Camper)

Data fromB.H. Pietenpol And Sons Air Camper Aircraft (2013). "How to Build a Pietenpol Air Camper or Sky Scout Airplane" . Retrieved May 14, 2013.

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

Ace Baby Ace Homebuilt aircraft design by Orland Corben

The Ace Baby Ace was the world's first aircraft to be marketed as a homebuilt aircraft when its plans were offered for sale in 1929. Plans are still available and Baby Aces are still being built today. Orland Corben designed a series of aircraft for the Ace Aircraft Manufacturing Company, the Baby Ace, Junior Ace, and Super Ace. Corben's name was associated with the aircraft, and it is commonly known as the Corben Baby Ace.

Homebuilt aircraft Aircraft constructed by amateurs

Homebuilt aircraft, also known as amateur-built aircraft or kit planes, are constructed by persons for whom this is not a professional activity. These aircraft may be constructed from "scratch", from plans, or from assembly kits.

Bernard Pietenpol

Bernard H. Pietenpol (1901–1984) was an aircraft designer.

Bede BD-4 Type of aircraft

The Bede BD-4 is an American light aircraft, designed by Jim Bede for homebuilding and available since 1968. It was the first homebuilt aircraft to be offered in kit form. It remains one of the world's most popular homebuilts with thousands of plans sold and hundreds of examples completed to date.

Grega Aircamper Type of aircraft

The Grega GN-1 Aircamper was a light aircraft developed in the United States in the early 1960s, originally as a personal project of its designer, but later marketed in plans form for homebuilding. John W. Grega initially set out to create a modernised version of the Pietenpol Air Camper using structural components from a Piper Cub but incorporating them into a new fuselage design based on the Pietenpol original. Two wings were designed, one based on the Cub wing, and another as a modernised version of the Pietenpol wing.

Heath Parasol

The Heath Parasol is an American single or two seat, open-cockpit, parasol winged, homebuilt monoplane.

The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

Preceptor N3 Pup Type of aircraft

The Preceptor N3 Pup is a family of ultralight, tube-and-fabric, high-wing, homebuilt aircraft. Kits were produced and marketed by Preceptor Aircraft, of Rutherfordton, North Carolina. The company was operating on a limited basis, actively selling plans online, but seems to have gone out of business in 2016.

The Stewart Headwind JD1HW1.7 and SAC-1VW is a single-seat high-wing tube-and-fabric construction homebuilt aircraft.

The Loehle Sport Parasol is an American single-seat, parasol winged, single engine, ultralight aircraft produced in kit form by Loehle Aircraft for amateur construction. The aircraft meets the requirements of the US FAR 103 Ultralight Vehicles regulations.

The Pop's Props Cloudster is a single seat, open-cockpit, parasol wing, single-engine monoplane, that was first flown in 1995. The aircraft was produced by Pop's Props of Cooksville, Illinois and made available as plans or in kit form. The company is no longer in business and kit production has been transferred to Simplex Aeroplanes of Old Saybrook, Connecticut.

The Pop's Props Zing is a single seat, open-cockpit, parasol wing, single-engine monoplane, first flown in 1996. The aircraft was designed by Scott Land and produced by Pop's Props of Cooksville, Illinois in the form of plans and an aircraft kit. The company is no longer in business and the aircraft kit is now available from Simplex Aeroplanes of Old Saybrook, Connecticut.

The RagWing RW1 Ultra-Piet is a family of single seat, parasol wing, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.

Smith Termite Type of aircraft

The Smith Special also known as "Smitty's Termite" or simply the Smith Termite is a single place homebuilt aircraft built primarily out of wood.

The Pietenpol Sky Scout is a parasol wing homebuilt aircraft designed by Bernard H. Pietenpol.

Aerotique Parasol American ultralight aircraft

The Aerotique Parasol is an American parasol-wing, strut-braced, conventional landing gear, single-seat, open cockpit, single engine in tractor configuration, ultralight aircraft that was designed as an ultralight version of the 1926 vintage Heath Parasol. It was originally produced by Yesteryear Aviation and later by Aerotique Aviation. The aircraft was supplied as factory-built only.

The Falconar SAL Mustang, also called the 2/3 Mustang and the SAL P-51D Mustang is a Canadian amateur-built aircraft, originally produced by Falconar Avia and introduced in 1969. The aircraft is a 23 scale replica of the North American P-51 Mustang and is supplied as a kit or as plans for amateur construction.

The Long Henderson Longster HL-1 is an American aircraft that was designed by Leslie Long and Ivan Diggs for homebuilt construction.

The St Croix Pietenpol Aerial is an American homebuilt aircraft that was designed by Chad and Charles Willie and produced by St Croix Aircraft of Corning, Iowa, first flown in 1977. When it was available the aircraft was supplied in the form of plans for amateur construction, with partial kits available.

The St Croix Pietenopol Aircamper is an American homebuilt aircraft, an adaptation of the classic 1920s Pietenpol Air Camper, re-designed by St Croix Aircraft of Corning, Iowa. When it was available the aircraft was supplied as a partial kit and in the form of plans for amateur construction.

References

  1. 1 2 "Pietenpol Aircraft Company - Pietenpol Air Camper History". pietenpolaircraftcompany.com. Pietenpol Aircraft Company. Retrieved June 20, 2017. By now Henry Ford had come out with his new car, the Model A, powered by a bigger four cylinder engine. At an estimated 40 horsepower, this engine seemed just the thing for Bernard Pietenpol's new aircraft design's needs, and having been on the market for several years, junk yards were starting to get as many of them as Model T engines...So Bernard Pietenpol went to work converting the Ford Model A engine for his new monoplane. In May 1929 Bernard Pietenpol test flew his Air Camper with the new engine. It was a complete success - a perfect match of airframe to power plant.
  2. Bowers, Peter M.: Guide to Homebuilts, 9th Edition, pages 10-12. Tab Books, 1984. ISBN   0-8306-2364-7
  3. Plane and Pilot: 1978 Aircraft Directory, page 150. Werner & Werner Corp Publishing, 1978. ISBN   0-918312-00-0
  4. 1 2 3 4 5 B.H. Pietenpol And Sons Air Camper Aircraft (2013). "How to Build a Pietenpol Air Camper or Sky Scout Airplane" . Retrieved May 14, 2013.
  5. 1 2 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 115. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  6. Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015-16, page 121. Flying Pages Europe SARL, 2015. ISSN   1368-485X
  7. "Pete takles a passel of Peitenpols". Air Trails: 61. Winter 1971.
  8. "Classic Pietenpol Now In Kit Form". avweb.com. April 7, 2015. Retrieved April 13, 2015.
  9. Sport Aviation. February 1958.{{cite journal}}: Missing or empty |title= (help)
  10. Light Aircraft Association (21 June 2013), LAA Type Acceptance Data Sheet TADS 047 Pietenpol Aircamper, retrieved 16 February 2014
  11. 1 2 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 248. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1