PowerBuoy

Last updated

PowerBuoy is a series of low-carbon emission marine power stations manufactured by Ocean Power Technologies (OPT), a renewable energy company located in New Jersey. PowerBuoys are most commonly used to provide power to offshore payloads generated through eco-friendly means. The PowerBuoy is designed to act as an Uninterruptible power supply. It stores energy in onboard batteries so that it can still provide continuous power through low generation periods. [1]

Contents

There are currently two models of the Powerbuoy being used commercially, with more being developed by OPT. The first is the original and more common PB3 PowerBuoy and the second is the Hybrid PowerBuoy which primarily uses solar energy rather than wave energy. Both models of the PowerBuoy are designed to work with current and future devices, systems, and machines created by OPT. [1] [2]

Models

PB3 PowerBuoy

The PB3 PowerBuoy is the original model of PowerBuoy developed by Ocean Power Technologies. The PB3 PowerBuoy functions as a point absorber, a device that harnesses wave energy to generate large amounts of power. [3] [4] PB3 PowerBuoys are designed to minimize operational costs by being easily deployable and using self-monitoring technology to allow quick and cheap maintenance. [1]

Design

Specifications for PB3 PowerBuoy [1]
HeightDraftSpar DiameterFloat DiameterWeightMooring Min DepthMooring Max Depth
13.3 m9.28 m1.0 m2.65 m8,300 kg25 m1,000 m

The PB3 PowerBuoy has 3 main parts; the float, the spar, and the mooring. [5] The float is the part of the buoy that rests on the surface of the water, it is usually a bright color like yellow, red, or orange. The spar is the large cylindrical section of the buoy located under the surface of the water. At the bottom of the spar is a large heavy plate which stops the spar from moving with the waves. The float is able to move freely up and down the spar. [5] [6] The mooring is what anchors the buoy in place. The mooring connects to the spar through a series of cables and rest under the surface of the water. Each PB3 PowerBuoy can have 1 to 3 moorings that can be adjusted to rest at different depths depending on the conditions and needs of the specific PB3 PowerBuoy. [1] [5]

PB3 PowerBuoys are designed to have maintenance every 3 years. [1]

On the float of each PB3 PowerBuoy is a control and management system, a set of devices that take and process information to send back to PB3 PowerBuoy control centers. This system is used to self-monitor and provide proactive information allowing for more efficient and less costly maintenance, allowing for increased availability and effectiveness. [1] [5] As of July 2020 the control and management system expanded to include the PowerBuoy surveillance system. [7]

Power Generation

The PB3 PowerBuoy uses the relative motion between the float and the spar to generate electricity. As waves move the float up and down the spar, the spar remains stationary due to the heavy plate at the bottom. As the float moves up and down, a large push rod connected to the top of the float is driven down into the spar. [6] The linear motion of the rod is transformed into power through the Power take-off (PTO). [4] The PTO is the system inside the spar that contains the machines and devices that transform the linear motion into electricity. First, an actuator turns the linear motion into rotational motion. The rotational motion is used to power a generator which produces alternating current (AC) power. AC power will periodically switch directions, which makes it harder to manage in a battery. The AC power goes through a power management system and is transformed into direct current (DC) power, power that flows in one direction and the power most commonly used in batteries. The DC power is then stored inside of the Energy Storage System (ESS). A cable transfers electricity from the ESS to an Under Sea Substation which acts as a hub for a group of PB3 PowerBuoys. The Substation takes the energy from a group of PowerBuoy and sends it either to the shore or to a separate payload through a long cable. [4] [6] The PB3 PowerBuoy is designed to keep some of the energy stored in the ESS at all times so that during a calm period without waves the buoy can provide continuous power using the stored energy. [1] [6]

The table above gives the averages for power generation and storage capabilities. The data varies for different PowerBuoys as the power generation relies on location and time of year. [1]

Hybrid PowerBuoy

The hybrid PowerBuoy was released in June 2020 as an alternative for the PB3 PowerBuoy. The goal of the hybrid PowerBuoy is to fill in for the PB3 PowerBuoy in locations where it was unreliable, such as areas with extreme weather conditions, heavy seas, or low waves. The hybrid PowerBuoy differs from the PB3 PowerBuoy in the way that it generates power. Instead of using the motion of the waves, the hybrid PowerBuoy comes equipped with solar panels, using solar energy to provide power to payloads. [2] [8]

Design

Specifications for hybrid PowerBuoy [2]
LengthWidthHeightWeight
6.0 m2.2 m2.2 m14,000 kg (full fuel tanks)

The hybrid PowerBuoy uses solar panels located on the top of the hybrid PowerBuoy to charge lithium iron phosphate batteries. The hybrid PowerBuoy uses single-point mooring to lower costs and make deployment faster and more efficient. A Stirling engine charges a battery to provide backup power if the solar panels are unable to provide enough power for short periods of time. [2] Additionally, there is an optional mast that can be added to the topside of the hybrid PowerBuoy to allow integration with the PowerBuoy surveillance system like the PB3 PowerBuoy. [2] [7]

Power Generation

The hybrid PowerBuoy provides its power from the lithium-iron phosphate batteries located on board. These batteries are primarily charged by the solar panels also located on the hybrid PowerBuoy. In situations where the solar panels are not able to provide enough power to charge the batteries, then the backup battery will switch in to provide less eco-friendly power to keep the hybrid PowerBuoy as an Uninterruptible power supply. The batteries are connected to a cable that transfers the power to the payload. [2]

Power information for hybrid PowerBuoy [2]
Continuous Payload PowerPeak Payload PowerPayload Usable Energy without refuelingTopside Payload Electrical InterfaceSubsea Payload Electrical Interface
850 W1000 W1100 - 2000 kWh24 Vdc standard-

up to 1000 Vdc custom

300 Vdc to 1000 Vdc through a mooring cable

PowerBuoy Surveillance System

The PowerBuoy surveillance system launched in July 2020. The surveillance system can be integrated with both models of the PowerBuoy and acts as an expansion of the communications and data collection devices already present. The system includes

One surveillance system is able to monitor over 1,600 sq. mi of the ocean's surface, either continuously or periodically. The systems can also be linked together to give visibility and information over a large ocean area. The system can be customized to include more features for specific niches, such as water quality and tsunami activity. [5] [7]

Subsea Battery

The Subsea Battery launched in August 2020. [9]

The subsea battery is an environmentally conscious and economically efficient battery designed to power subsea payloads and can be integrated with both the PB3 PowerBuoy and the Hybrid PowerBuoy. However, it can also be utilized on its own or configured to be compatible with other power sources. [10]

The Subsea Battery uses lithium-iron phosphate batteries and is made of environmentally friendly (light) metals. The Subsea Battery is designed for a 10-year life however the conditions it is put in can cause some variation. [10]

Power information and Dimensions of the Subsea Battery [10]
Total CapacityVolatgePeak Power DeliveryDimensions (LengthxWidthxHeight)Total WeightDepth Rating
132 kWh250 VDC to 350 VDC15 kW3 m x 2 m x 2.1 m6,700 kg500 m

Uses

While initially designed with the goal of providing renewable energy to people living on land, over time OPT has shifted the focus of PowerBuoy to finding more specific niches as an offshore power system. surveillance, and communication device. [11]

Defense and Security

PowerBuoy's ability to constantly power itself, go long periods with maintenance, and surveillance/communication capabilities make it a strong asset for organizations focusing on defense and security. PowerBuoys are able to be placed in remote areas across the ocean and provide continuous information to on shore facilities. This makes them ideal for monitoring remote sections of ocean for illegal activities such as human and drug trafficking. Organizations utilizing PowerBuoys can get continuous updates on the boats that enter pockets of the ocean where PowerBuoys are monitoring. [7] [11] [12]

Science and Research

PowerBuoys provide a cost-efficient and eco-friendly way for research to be done in remote areas of the ocean. PowerBuoys provide power to machines and devices used by scientists and researchers to understand climate change, ecosystems, weather patterns, and more. The low operational cost of PowerBuoys along with them not needing consistent maintenance makes it ideal for longer operations. [8] [13]

Communication

PowerBuoys expand communication networks using their built-in surveillance and communication systems. As they can be placed in remote offshore areas and power themselves, Powerbuoys are able to be used as a stable communication platform that can expand already existing networks. This allows users and organizations to expand their range for both commercial and recreational uses. [7] [14]

Related Research Articles

Distributed generation, also distributed energy, on-site generation (OSG), or district/decentralized energy, is electrical generation and storage performed by a variety of small, grid-connected or distribution system-connected devices referred to as distributed energy resources (DER).

<span class="mw-page-title-main">Wave power</span> Transport of energy by wind waves, and the capture of that energy to do useful work

Wave power is the capture of energy of wind waves to do useful work – for example, electricity generation, water desalination, or pumping water. A machine that exploits wave power is a wave energy converter (WEC).

Energy harvesting (EH) – also known as power harvesting,energy scavenging, or ambient power – is the process by which energy is derived from external sources, then stored for use by small, wireless autonomous devices, like those used in wearable electronics, condition monitoring, and wireless sensor networks.

<span class="mw-page-title-main">Autonomous underwater vehicle</span> Unmanned underwater vehicle with autonomous guidance system

An autonomous underwater vehicle (AUV) is a robot that travels underwater without requiring continuous input from an operator. AUVs constitute part of a larger group of undersea systems known as unmanned underwater vehicles, a classification that includes non-autonomous remotely operated underwater vehicles (ROVs) – controlled and powered from the surface by an operator/pilot via an umbilical or using remote control. In military applications an AUV is more often referred to as an unmanned undersea vehicle (UUV). Underwater gliders are a subclass of AUVs.

<span class="mw-page-title-main">National Institute of Ocean Technology</span> Scientific organization in Tamil Nadu

The National Institute of Ocean Technology (NIOT) was established in November 1993 as an autonomous society under the Ministry of Earth Sciences in India. NIOT is managed by a Governing Council and is headed by a director. The institute is based in Chennai. The major aim of starting NIOT was to develop reliable indigenous technologies to solve various engineering problems associated with harvesting of non-living and living resources in India's exclusive economic zone, which is about two-thirds of the land area of India.

Subsea technology involves fully submerged ocean equipment, operations, or applications, especially when some distance offshore, in deep ocean waters, or on the seabed. The term subsea is frequently used in connection with oceanography, marine or ocean engineering, ocean exploration, remotely operated vehicle (ROVs) autonomous underwater vehicles (AUVs), submarine communications or power cables, seafloor mineral mining, oil and gas, and offshore wind power.

A mooring in oceanography is a collection of devices connected to a wire and anchored on the sea floor. It is the Eulerian way of measuring ocean currents, since a mooring is stationary at a fixed location. In contrast to that, the Lagrangian way measures the motion of an oceanographic drifter, the Lagrangian drifter.

<span class="mw-page-title-main">CETO</span>

CETO is a wave-energy technology that converts kinetic energy from ocean swell into electrical power and directly desalinates freshwater through reverse osmosis. The technology was developed and tested onshore and offshore in Fremantle, Western Australia. In early 2015 a CETO 5 production installation was commissioned and connected to the grid. As of January 2016 all the electricity generated is being purchased to contribute towards the power requirements of HMAS Stirling naval base at Garden Island, Western Australia. Some of the energy will also be used directly to desalinate water.

<span class="mw-page-title-main">European Marine Energy Centre</span>

The European Marine Energy Centre (EMEC) Ltd is a UKAS accredited test and research center focused on wave and tidal power development, based in the Orkney Islands, UK. The centre provides developers with the opportunity to test full-scale grid-connected prototype devices in wave and tidal conditions.

<span class="mw-page-title-main">Floating wind turbine</span> Type of wind turbine

A floating wind turbine is an offshore wind turbine mounted on a floating structure that allows the turbine to generate electricity in water depths where fixed-foundation turbines are not feasible. Floating wind farms have the potential to significantly increase the sea area available for offshore wind farms, especially in countries with limited shallow waters, such as Spain, Portugal, Japan, France and the United States' West Coast. Locating wind farms further offshore can also reduce visual pollution, provide better accommodation for fishing and shipping lanes, and reach stronger and more consistent winds.

Narec, since 2014 known as the National Renewable Energy Centre, is a part of the Offshore Renewable Energy (ORE) Catapult, a British technology innovation and research centre for offshore wind power, wave energy, tidal energy and low carbon technologies. ORE Catapult's head office is in Glasgow, Scotland. The centre operates multi-purpose offshore renewable energy test and demonstration facilities. It is similar to other centres, such as NREL in the US and National Centre for Renewable Energies (CENER) in Spain. The National Renewable Energy Centre is based in Blyth, Northumberland.

Ocean Power Technologies (OPT) is a U.S. publicly owned renewable energy company, providing electric power and communications solutions, services and related for remote offshore applications. The company's PowerBuoy wave energy conversion technology is theoretically scalable to hundreds of megawatts and the generated energy from wave power can be supplied to the grid via submarine cables. Several projects were undertaken around the world, but the economic viability of the theoretical concept has been problematic.

<span class="mw-page-title-main">Evopod</span> Tidal energy device

Evopod is a unique tidal energy device being developed by a UK-based company Oceanflow Energy Ltd for generating electricity from tidal streams and ocean currents. It can operate in exposed deep water sites where severe wind and waves also make up the environment.

<span class="mw-page-title-main">Marine energy</span> Energy stored in the waters of oceans

Marine energy or marine power refers to the energy carried by ocean waves, tides, salinity, and ocean temperature differences. The movement of water in the world's oceans creates a vast store of kinetic energy, or energy in motion. Some of this energy can be harnessed to generate electricity to power homes, transport and industries.

Liquid Robotics is an American marine robotics corporation that designs, manufactures and sells the Wave Glider, a wave and solar powered unmanned surface vehicle (USV). The Wave Glider harvests energy from ocean waves for propulsion. With this energy source, Wave Gliders can spend many months at a time at sea, collecting and transmitting ocean data.

The following outline is provided as an overview of and topical guide to solar energy:

Passive heave compensation is a technique used to reduce the influence of waves upon lifting and drilling operations. A simple passive heave compensator (PHC) is a soft spring which utilizes spring isolation to reduce transmissibility to less than 1. PHC differs from AHC by not consuming external power.

Oscillating water columns (OWCs) are a type of wave energy converter that harness energy from the oscillation of the seawater inside a chamber or hollow caused by the action of waves. OWCs have shown promise as a renewable energy source with low environmental impact. Because of this, multiple companies have been working to design increasingly efficient OWC models. OWC are devices with a semi-submerged chamber or hollow open to the sea below, keeping a trapped air pocket above a water column. Waves force the column to act like a piston, moving up and down, forcing the air out of the chamber and back into it. This continuous movement forces a bidirectional stream of high-velocity air, which is channeled through a power take-off (PTO). The PTO system converts the airflow into energy. In models that convert airflow to electricity, the PTO system consists of a bidirectional turbine. This means that the turbine always spins the same direction regardless of the direction of airflow, allowing for energy to be continuously generated. Both the collecting chamber and PTO systems will be explained further under "Basic OWC Components."

Wind power is a form of renewable energy in South Korea with the goal of reducing greenhouse gas (GHG) and particulate matter (PM) emissions caused by coal based power. After two oil crises dating back to the 1970s, the South Korean government needed to transition to renewable energy, which encouraged their first renewable energy law in 1987.

The Ocean Grazer is a conceptual energy collection platform, projected to house several renewable energy generation modules, including wave energy, solar energy and wind energy. The development of the Ocean Grazer platform has been carried out by the University of Groningen in the Netherlands.

References

  1. 1 2 3 4 5 6 7 8 9 "PB3 PowerBuoy®". Ocean Power Technologies. Retrieved 22 October 2020.
  2. 1 2 3 4 5 6 7 "hybrid PowerBuoy®". Ocean Power Technologies. Retrieved 29 October 2020.
  3. "Energy and the Environment-A Coastal Perspective - Point Absorbers: The Technology and Innovations". coastalenergyandenvironment.web.unc.edu. Retrieved 15 November 2020.
  4. 1 2 3 Eder, James; Bretl, James; Edwards, Kathleen (9 June 2013). Empirical Demonstration of Acausal Control Strategies for Wave Energy Converters. Volume 8: Ocean Renewable Energy. American Society of Mechanical Engineers. doi:10.1115/omae2013-10020. ISBN   978-0-7918-5542-3.
  5. 1 2 3 4 5 "Ocean Power Technologies - Promotional Video - YouTube". www.youtube.com. Retrieved 15 November 2020.
  6. 1 2 3 4 Edwards, Kathleen; Mekhiche, Mike (15 April 2014). "Ocean Power Technologies Powerbuoy®: System‐Level Design, Development and Validation Methodology".{{cite journal}}: Cite journal requires |journal= (help)
  7. 1 2 3 4 5 "StackPath". www.offshore-mag.com. Retrieved 27 October 2020.
  8. 1 2 "Ocean Power Technologies Launches hybrid PowerBuoy®". finance.yahoo.com. Retrieved 29 October 2020.
  9. "OPT launches Subsea Battery solution". Offshore Energy. 18 August 2020. Retrieved 29 October 2020.
  10. 1 2 3 "Subsea Battery". Ocean Power Technologies. Retrieved 29 October 2020.
  11. 1 2 White, William (6 October 2020). "Ocean Power Technologies: 14 Things to Know About OPTT Stock". InvestorPlace. Retrieved 16 November 2020.
  12. "Defense & Security". Ocean Power Technologies. Retrieved 16 November 2020.
  13. "Science and Research". Ocean Power Technologies. Retrieved 16 November 2020.
  14. "Communications". Ocean Power Technologies. Retrieved 16 November 2020.