Prilezhaev reaction

Last updated
Prilezhaev reaction
Named afterNikolai Alexandrovich Prilezhaev (also spelled Nikolaj Alexandrovich Prileschajew, Russian: Николай Александрович Прилежаев)
Reaction type Ring forming reaction
Identifiers
Organic Chemistry Portal prilezhaev-reaction
RSC ontology ID RXNO:0000405

The Prilezhaev reaction, also known as the Prileschajew reaction or Prilezhaev epoxidation, is the chemical reaction of an alkene with a peroxy acid to form epoxides. [1] It is named after Nikolai Prilezhaev, who first reported this reaction in 1909. [2] A widely used peroxy acid for this reaction is meta-chloroperoxybenzoic acid (m-CPBA), due to its stability and good solubility in most organic solvents. [1] [3] The reaction is performed in inert solvents (C6H14, C6H6, CH2Cl2, CHCl3, CCl4) between -10 and 60 °C with the yield of 60-80%.

An illustrative example is the epoxidation of trans-2-butene with m-CPBA to give trans-2,3-epoxybutane: [4]

Trans-2-buteneepoxidation.png

The oxygen atom that adds across the double bond of the alkene is taken from the peroxy acid, generating a molecule of the corresponding carboxylic acid as a byproduct. The reaction is highly stereospecific in the sense that the double bond stereochemistry is generally transferred to the relative configuration of the epoxide with essentially perfect fidelity, so that a trans-olefin leads to the stereoselective formation of the trans-2,3-substituted epoxide only, as illustrated by the example above, while a cis-olefin would only give the cis-epoxide. This stereochemical outcome is a consequence of the accepted mechanism, discussed below.

In general, the Prilezhaev reaction epoxidizes the most substituted double bond. [1]

Reaction mechanism

The frontier orbital interactions involved in the Prilezhaev reaction Prilezhaev-frontierorbitals.png
The frontier orbital interactions involved in the Prilezhaev reaction

The reaction proceeds through what is commonly known as the "butterfly mechanism", first proposed by Bartlett, wherein the peracid is intramolecularly hydrogen-bonded at the transition state. [5] Although there are frontier orbital interactions in both directions, the peracid is generally viewed as the electrophile and the alkene as the nucleophile. In support of this notion, more electron-rich alkenes undergo epoxidation at a faster rate. For example, the relative rates of epoxidation increase upon methyl substitution of the alkene (the methyl groups increase the electron density of the double bond by hyperconjugation): ethylene (1, no methyl groups), propene (24, one methyl group), cis-2-butene (500, two methyl groups), 2-methyl-2-butene (6500, three methyl groups), 2,3-dimethyl-2-butene (>6500, four methyl groups).

The reaction is believed to be concerted, with a transition state that is synchronous or nearly so. [6] The "butterfly mechanism" takes place via a transition state geometry in which the plane of the peracid bisects that of the alkene, with the O–O bond aligned perpendicular to it. This conformation allows the key frontier orbital interactions to occur. The primary interaction of the occupied πC=C orbital (HOMO) and the low-lying unoccupied σ*O-O orbital (LUMO). This interaction accounts for the observed overall nucleophilic character and electrophilic character of the alkene and peracid, respectively. There is also a secondary interaction between a lone pair orbital perpendicular to the plane of the peracid, nO(p) (HOMO) and the unoccupied π*C=C orbital (LUMO). [7] [8] Using the approach of Anslyn and Dougherty (2006, p. 556), the mechanism can be represented as follows: [9]

Mcpbaepoxidation-updated.png

There is a very large dependence of the reaction rate on the choice of solvent. [10]

Related Research Articles

<span class="mw-page-title-main">Alkene</span> Hydrocarbon compound containing one or more C=C bonds

In organic chemistry, an alkene, or olefin, is a hydrocarbon containing a carbon–carbon double bond. The double bond may be internal or in the terminal position. Terminal alkenes are also known as α-olefins.

A halogen addition reaction is a simple organic reaction where a halogen molecule is added to the carbon–carbon double bond of an alkene functional group.

<span class="mw-page-title-main">Epoxide</span> Organic compounds with a carbon-carbon-oxygen ring

In organic chemistry, an epoxide is a cyclic ether, where the ether forms a three-atom ring: two atoms of carbon and one atom of oxygen. This triangular structure has substantial ring strain, making epoxides highly reactive, more so than other ethers. They are produced on a large scale for many applications. In general, low molecular weight epoxides are colourless and nonpolar, and often volatile.

The 1,3-dipolar cycloaddition is a chemical reaction between a 1,3-dipole and a dipolarophile to form a five-membered ring. The earliest 1,3-dipolar cycloadditions were described in the late 19th century to the early 20th century, following the discovery of 1,3-dipoles. Mechanistic investigation and synthetic application were established in the 1960s, primarily through the work of Rolf Huisgen. Hence, the reaction is sometimes referred to as the Huisgen cycloaddition. 1,3-dipolar cycloaddition is an important route to the regio- and stereoselective synthesis of five-membered heterocycles and their ring-opened acyclic derivatives. The dipolarophile is typically an alkene or alkyne, but can be other pi systems. When the dipolarophile is an alkyne, aromatic rings are generally produced.

<span class="mw-page-title-main">Peroxy acid</span> Organic acid having a peroxide bond

A peroxy acid is an acid which contains an acidic –OOH group. The two main classes are those derived from conventional mineral acids, especially sulfuric acid, and the peroxy derivatives of organic carboxylic acids. They are generally strong oxidizers.

meta-Chloroperoxybenzoic acid is a peroxycarboxylic acid. It is a white solid often used widely as an oxidant in organic synthesis. mCPBA is often preferred to other peroxy acids because of its relative ease of handling. mCPBA is a strong oxidizing agent that may cause fire upon contact with flammable material.

(<i>E</i>)-Stilbene Chemical compound

(E)-Stilbene, commonly known as trans-stilbene, is an organic compound represented by the condensed structural formula C6H5CH=CHC6H5. Classified as a diarylethene, it features a central ethylene moiety with one phenyl group substituent on each end of the carbon–carbon double bond. It has an (E) stereochemistry, meaning that the phenyl groups are located on opposite sides of the double bond, the opposite of its geometric isomer, cis-stilbene. Trans-stilbene occurs as a white crystalline solid at room temperature and is highly soluble in organic solvents. It can be converted to cis-stilbene photochemically, and further reacted to produce phenanthrene.

<span class="mw-page-title-main">Jacobsen epoxidation</span>

The Jacobsen epoxidation, sometimes also referred to as Jacobsen-Katsuki epoxidation is a chemical reaction which allows enantioselective epoxidation of unfunctionalized alkyl- and aryl- substituted alkenes. It is complementary to the Sharpless epoxidation (used to form epoxides from the double bond in allylic alcohols). The Jacobsen epoxidation gains its stereoselectivity from a C2 symmetric manganese(III) salen-like ligand, which is used in catalytic amounts. The manganese atom transfers an oxygen atom from chlorine bleach or similar oxidant. The reaction takes its name from its inventor, Eric Jacobsen, with Tsutomu Katsuki sometimes being included. Chiral-directing catalysts are useful to organic chemists trying to control the stereochemistry of biologically active compounds and develop enantiopure drugs.

Peracetic acid (also known as peroxyacetic acid, or PAA) is an organic compound with the formula CH3CO3H. This peroxy acid is a colorless liquid with a characteristic acrid odor reminiscent of acetic acid. It can be highly corrosive.

<span class="mw-page-title-main">Shi epoxidation</span>

The Shi epoxidation is a chemical reaction described as the asymmetric epoxidation of alkenes with oxone and a fructose-derived catalyst (1). This reaction is thought to proceed via a dioxirane intermediate, generated from the catalyst ketone by oxone. The addition of the sulfate group by the oxone facilitates the formation of the dioxirane by acting as a good leaving group during ring closure. It is notable for its use of a non-metal catalyst and represents an early example of organocatalysis. The reaction was first discovered by Yian Shi of Colorado State University in 1996.

<span class="mw-page-title-main">Cyclopropanation</span> Chemical process which generates cyclopropane rings

In organic chemistry, cyclopropanation refers to any chemical process which generates cyclopropane rings. It is an important process in modern chemistry as many useful compounds bear this motif; for example pyrethroid insecticides and a number of quinolone antibiotics. However, the high ring strain present in cyclopropanes makes them challenging to produce and generally requires the use of highly reactive species, such as carbenes, ylids and carbanions. Many of the reactions proceed in a cheletropic manner.

<span class="mw-page-title-main">Allylic strain</span> Type of strain energy in organic chemistry

Allylic strain in organic chemistry is a type of strain energy resulting from the interaction between a substituent on one end of an olefin with an allylic substituent on the other end. If the substituents are large enough in size, they can sterically interfere with each other such that one conformer is greatly favored over the other. Allylic strain was first recognized in the literature in 1965 by Johnson and Malhotra. The authors were investigating cyclohexane conformations including endocyclic and exocylic double bonds when they noticed certain conformations were disfavored due to the geometry constraints caused by the double bond. Organic chemists capitalize on the rigidity resulting from allylic strain for use in asymmetric reactions.

In organic chemistry, the Ei mechanism, also known as a thermal syn elimination or a pericyclic syn elimination, is a special type of elimination reaction in which two vicinal (adjacent) substituents on an alkane framework leave simultaneously via a cyclic transition state to form an alkene in a syn elimination. This type of elimination is unique because it is thermally activated and does not require additional reagents, unlike regular eliminations, which require an acid or base, or would in many cases involve charged intermediates. This reaction mechanism is often found in pyrolysis.

<span class="mw-page-title-main">Jacobsen's catalyst</span> Chemical compound

Jacobsen's catalyst is the common name for N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexane­diaminomanganese(III) chloride, a coordination compound of manganese and a salen-type ligand. It is used as an asymmetric catalyst in the Jacobsen epoxidation, which is renowned for its ability to enantioselectively transform prochiral alkenes into epoxides. Before its development, catalysts for the asymmetric epoxidation of alkenes required the substrate to have a directing functional group, such as an alcohol as seen in the Sharpless epoxidation. This compound has two enantiomers, which give the appropriate epoxide product from the alkene starting material.

Epoxidation with dioxiranes refers to the synthesis of epoxides from alkenes using three-membered cyclic peroxides, also known as dioxiranes.

<span class="mw-page-title-main">Oxaziridine</span> Chemical compound

An oxaziridine is an organic molecule that features a three-membered heterocycle containing oxygen, nitrogen, and carbon. In their largest application, oxaziridines are intermediates in the industrial production of hydrazine. Oxaziridine derivatives are also used as specialized reagents in organic chemistry for a variety of oxidations, including alpha hydroxylation of enolates, epoxidation and aziridination of olefins, and other heteroatom transfer reactions. Oxaziridines also serve as precursors to amides and participate in [3+2] cycloadditions with various heterocumulenes to form substituted five-membered heterocycles. Chiral oxaziridine derivatives effect asymmetric oxygen transfer to prochiral enolates as well as other substrates. Some oxaziridines also have the property of a high barrier to inversion of the nitrogen, allowing for the possibility of chirality at the nitrogen center.

William Clark Still is an American organic chemist. As a distinguished professor at Columbia University, Clark Still made significant contributions to the field of organic chemistry, particularly in the areas of natural product synthesis, reaction development, conformational analysis, macrocyclic stereocontrol, and computational chemistry. Still and coworkers also developed the purification technique known as flash column chromatography which is widely used for the purification of organic compounds.

<span class="mw-page-title-main">Trifluoroperacetic acid</span> Chemical compound

Trifluoroperacetic acid is an organofluorine compound, the peroxy acid analog of trifluoroacetic acid, with the condensed structural formula CF
3
COOOH
. It is a strong oxidizing agent for organic oxidation reactions, such as in Baeyer–Villiger oxidations of ketones. It is the most reactive of the organic peroxy acids, allowing it to successfully oxidise relatively unreactive alkenes to epoxides where other peroxy acids are ineffective. It can also oxidise the chalcogens in some functional groups, such as by transforming selenoethers to selones. It is a potentially explosive material and is not commercially available, but it can be quickly prepared as needed. Its use as a laboratory reagent was pioneered and developed by William D. Emmons.

<span class="mw-page-title-main">Anti-periplanar</span> Conformation of an A−B−C−D molecule where the A−B C−D dihedral angle is of magnitude >150°

In organic chemistry, anti-periplanar, or antiperiplanar, describes the A−B−C−D bond angle in a molecule. In this conformer, the dihedral angle of the A−B bond and the C−D bond is greater than +150° or less than −150°. Anti-periplanar is often used in textbooks to mean strictly anti-coplanar, with an A−BC−D dihedral angle of 180°. In a Newman projection, the molecule will be in a staggered arrangement with the anti-periplanar functional groups pointing up and down, 180° away from each other. Figure 5 shows 2-chloro-2,3-dimethylbutane in a sawhorse projection with chlorine and a hydrogen anti-periplanar to each other.

<span class="mw-page-title-main">Epoxidation of allylic alcohols</span>

The epoxidation of allylic alcohols is a class of epoxidation reactions in organic chemistry. One implementation of this reaction is the Sharpless epoxidation. Early work showed that allylic alcohols give facial selectivity when using meta-chloroperoxybenzoic acid (m-CPBA) as an oxidant. This selectivity was reversed when the allylic alcohol was acetylated. This finding leads to the conclusion that hydrogen bonding played a key role in selectivity and the following model was proposed.

References

  1. 1 2 3 Li, Jie Jack; Corey, E. J. (2007). "Prilezhaev Reaction". Name Reactions of Functional Group Transformations. Wiley-Interscience. pp. 274–281. ISBN   9780470176504.
  2. Prileschajew, Nikolaj (1909). "Oxydation ungesättigter Verbindungen mittels organischer Superoxyde" [Oxidation of unsaturated compounds by means of organic superoxides]. Berichte der deutschen chemischen Gesellschaft (in German). 42 (4): 4811–4815. doi:10.1002/cber.190904204100.
  3. Kürti, László; Czakó, Barbara (2005). Strategic Applications of Named Reactions in Organic Synthesis: Background and Detailed Mechanisms. Elsevier Academic Press. p. 362. ISBN   978-0124297852.
  4. Vollhardt, K. Peter C.; Schore, Neil Eric (2011). Organic chemistry: Structure and function (6th ed.). New York: W.H. Freeman. ISBN   9781429204941. OCLC   422757611.
  5. Bartlett, Paul D. (1950). "Recent work on the mechanisms of peroxide reactions". Record of Chemical Progress . 11: 47–51.
  6. Singleton, Daniel A.; Merrigan, Steven R.; Liu, Jian; Houk, Kendall N. (1997). "Experimental Geometry of the Epoxidation Transition State". Journal of the American Chemical Society . 119 (14): 3385–3386. doi:10.1021/ja963656u.
  7. Most textbooks depict the reaction mechanism using only four curly arrows, so that the O–H bond is used as the source of electrons for the formation of the second C–O bond. Although such a depiction is formally correct, it is better to regard a pre-existing oxygen lone pair as the source of electrons for that bond (resulting in an additional arrow), in light of the discussion on frontier orbital interactions involved in the reaction. Anslyn and Dougherty (2006, p. 556) depicts the Prilezhaev reaction mechanism using the arrow pushing shown here and has a discussion on using proper electron sources in Appendix 5 ("Pushing Electrons," pp. 1061-1074).
  8. Evans, David A.; Myers, Andrew G. (2007). "Chemistry 206 & 215 Advanced Organic Chemistry Lecture Notes: Lecture Notes, Problem Sets and Exams". Harvard Department of Chemistry and Chemical Biology. Retrieved December 27, 2018.
  9. Anslyn, Eric V.; Dougherty, Dennis A. (2006). "Epoxidation". Modern Physical Organic Chemistry. University Science Books. pp. 555–556. ISBN   9781891389313.
  10. Dryuk, V. G. (1976). "The mechanism of epoxidation of olefins by peracids". Tetrahedron . 32 (23): 2855–2866. doi:10.1016/0040-4020(76)80137-8.