Rubber band gun

Last updated

A rubber band gun is a toy gun used to fire one or more rubber bands (or "elastic bands").

Contents

Rubber band guns are often used in live-action games such as Assassins, in which they are common and popular toy weapons. They are also common in offices and classrooms. Rubber band guns have been popular toys that date back to the invention of rubber bands, which were patented in England on March 17, 1845 by Stephen Perry. [1] [2] [3]

Rubber band gun types

Clothespin

A simple rubber band pistol using a clothespin as its firing mechanism RBGPooma1.jpg
A simple rubber band pistol using a clothespin as its firing mechanism

Clothespin rubber band guns are the simplest form of RBGs, being very easy to produce. Its firing mechanism consists solely of a clothespin with a rubber band placed between its jaws. The gun may have more than one clothespin, thereby allowing multiple shots.

Repeating

Most rubber band guns are of repeating nature, giving the user more firepower than single shot designs. They range from step-up-action guns and single rotor semi autos, to removable magazine automatic weapons. To simulate real life repeaters, there have been designs that require users to operate a bolt, pump a pump, pull back a hammer, or rack a slide. These may be impractical against other automatic rubber band guns, but give the user the psychological response of real firearms. Most repeaters fall into one of two categories:

Escapement

Escapement rubber band guns are capable of firing at least three rubber bands when fully loaded. Escapement rubber band guns are available in semi-realistic shapes, including pistols, rifles, and shotguns. They form the basis of almost all automatic rubber band gun systems.

They are usually made of wood (although many Lego-based designs have been produced), and most have a strong machined plastic firing mechanism, consisting of a rotor where bands are hooked, and an escapement mechanism that lets the rotor rotate one position, releasing a rubber band. In Lego designs, a gear is commonly used in place of a conventional rotor, and due to how fine the teeth on the gear are, the escapement allows a rotation of more than one tooth, requiring rubber bands to be loaded a set number of teeth apart.

Automatic

Fully automatic rubber band guns are similar to automatic firearms, in that the gun's mechanism is powered by the projectile (in the case of automatic rubber band guns, the potential energy stored in the stretched rubber band). Many mechanisms have been devised by various online designers such as:

  • A modified releaser that simply lets to rotor spin freely when sad, and a weighted delay piece to keep the rate of fire practical. This system suffers from weight, low capacity, reduced power, and a high rate of fire, but is very simple.
  • A separate rotor and releaser that are activated by either a bolt or a hammer moving by the power of launched rubber bands. This may be used to simulate moving parts on real firearms, such as slides and bolts. They can also give the user a sense of recoil.

Rotary

A rubber band rotary gun consists of between 3 and 12 repeater RBGs arranged on a cylindrical "rotor" as barrels. The rotor rotates with either a crank or a motor, and each individual barrel is fired as it reaches the top of its locus.

The Disintegrator atop its tripod Motorised Cordless Rubberband Minigun.jpg
The Disintegrator atop its tripod

The original tripod-mounted rubber band rotary gun, patented by Surefire Products, was featured on the Gadget Show on UK television in March 2007 and January 2010.

A twelve-barrel rotary gun using twelve-shot repeater mechanisms can fire 144 rubber bands automatically. It is fired by manually rotating a crank handle and pulling a firing trigger.

Motorized RBGs with rotary barrels are among the latest developments in the world of rubber band guns. In November 2007, Anthony Smith completed the Disintegrator, a 288-shot motorized rubber band gun with 2 12-barrel counter-rotating rotors. This gun can be mounted on a tripod or fired from the hip, and can fire more than 40 rounds per second.

There are two common versions of the rubber band rotary gun mechanism:

String-operated

A rotor with a pre-prepared string spooled around it pulls off rubber bands one-by-one as it is unwound from the rotor and off the barrel. The string is wound around one barrel, then a rubber band placed on that barrel, then the next barrel, and so on until the string can be pulled and the bands fired.

Escapement

Each barrel has an escapement mechanism on it with a releaser that is pressed once the barrel reaches a certain point.

Materials

Rubber band guns can be created with many different media balancing ease of construction, reliability, and capacity:

Wood

The majority of lasting, reliable rubber band guns are made of machined wood. Among the most popular wooden RBG designers are parabellum1262, who has developed magazine-fed automatic and select-fire designs, and oggcraft, known for his unique firing mechanisms.

Popsicle sticks

A rubber band assault rifle made with ice cream sticks, with mock bayonet removed Bayonet-off.jpg
A rubber band assault rifle made with ice cream sticks, with mock bayonet removed
A sniper rifle-style Popsticle stick rubber band gun, with mock scope and bolt Sniper.JPG
A sniper rifle-style Popsticle stick rubber band gun, with mock scope and bolt

Rubber band guns can be made from Popsicle sticks. The individual sticks are held together by either rubber bands, tape or glue. They can also be cut or carved to the required shape. It is generally limited to pistols and sniper rifles, as only one or two shots can be loaded on most guns, but semi-automatic ice-cream stick guns have been made by determined amateurs. They can also be adapted to fire arrows or other small objects with the rubber bands. In some guns, the handle doubles as a trigger, but having a separate trigger and handle provides much better accuracy.

Rubber band guns can be made using only Popsicle sticks, staples, and rubber bands of various styles and sizes. This specialized technique developed and honed by then-high school student Stuart A. Burton [4] is very malleable and can be utilized to develop very advanced and complicated rubber band guns. For instance, using levers and sliding mechanisms, one can make a pump-action shotgun. Using simple geometry and specialized positioning, one can easily make semi-automatic and 2-shot burst-fire weapons, as well as more complicated fully automatic weapons using paperclips as an axis for a rotating firing piece. Occasionally, other materials (like bamboo skewers, for instance) may be used in the making of the gun.

Sights, foregrips and magazines to hold extra rubber bands may also be made according to the owner's preferences. Through creativity and imagination, one can make detachable sights, grips, stocks, silencers, and under-barrel shotguns or grenade launchers.

K'Nex

Rubber band guns can be built from K'Nex. Such constructions can include handheld pistols, automatics and sniper rifles. Some K'Nex guns work using the escapement mechanism seen in semi-automatic rubber band guns, while some more advanced types have hinge triggers that are more reliable, allow for more bands on a barrel, and have a more realistic trigger pull.

Lego

Most rubber band creators start out with lego, as it allows users to easily express ideas. In early 2007, Sebastian Dick built a motorized rubber band rotary gun entirely from Lego, capable of firing 11 rounds per second. Many other builders on YouTube followed suit, building string-operated miniguns, while some shoot actual bricks. Many RBGs are built out of Lego, from simple hinge guns to complex fire-rate-dampening automatic rifles. Lego rubber band gun mechanisms can also be used to launch light projectiles of various types, from small bricks and paper planes to wooden skewers. Lego rubber band guns can be quite reliable, without all the complexity of K'Nex.

It is difficult to devise a suitable, practical magazine-fed rubber band gun system out of Lego, due to the elasticity of rubber bands (which requires a mechanism to lock the retention wheel when not connected to the firing mechanism).

Related Research Articles

<span class="mw-page-title-main">Double-barreled shotgun</span> Shotgun with two parallel barrels

A double-barreled shotgun, also known as a double shotgun, is a break-action shotgun with two parallel barrels, allowing two single shots that can be fired simultaneously or sequentially in quick succession.

<span class="mw-page-title-main">Firearm</span> Gun for an individual

A firearm is any type of gun that uses an explosive charge and is designed to be readily carried and used by an individual. The term is legally defined further in different countries.

<span class="mw-page-title-main">Machine gun</span> Fully-automatic firearm

A machine gun (MG) is a fully automatic, rifled auto-loading firearm designed for sustained direct fire with rifle cartridges. Other automatic firearms such as automatic shotguns and automatic rifles (including assault rifles and battle rifles) are typically designed more for firing short bursts rather than continuous firepower and are not considered true machine guns. Submachine guns fire handgun cartridges rather than rifle cartridges, therefore they are not considered machine guns, while automatic firearms of 20 mm (0.79 in) caliber or more are classified as autocannons rather than machine guns.

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters or sixguns. Due to their rotating cylinder mechanism, they may also be called wheel guns.

<span class="mw-page-title-main">Single-shot</span> Firearm that holds one round of ammunition

In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.

<span class="mw-page-title-main">Bolt action</span> Type of firearm mechanism

Bolt-action is a type of manual firearm action that is operated by directly manipulating the bolt via a bolt handle, which is most commonly placed on the right-hand side of the firearm.

<span class="mw-page-title-main">Action (firearms)</span> Functional mechanism of breech-loading

In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.

A semi-automatic firearm, also called a self-loading or autoloading firearm, is a repeating firearm whose action mechanism automatically loads a following round of cartridge into the chamber and prepares it for subsequent firing, but requires the shooter to manually actuate the trigger in order to discharge each shot. Typically, this involves the weapon's action utilizing the excess energy released during the preceding shot to unlock and move the bolt, extracting and ejecting the spent cartridge case from the chamber, re-cocking the firing mechanism, and loading a new cartridge into the firing chamber, all without input from the user. To fire again, however, the user must actively release the trigger, allow it to "reset", before pulling the trigger again to fire off the next round. As a result, each trigger pull only discharges a single round from a semi-automatic weapon, as opposed to a fully automatic weapon, which will shoot continuously as long as the ammunition is replete and the trigger is kept depressed.

<span class="mw-page-title-main">Semi-automatic pistol</span> Type of pistol

A semi-automatic pistol is a handgun that automatically ejects and loads cartridges in its chamber after every shot fired. Only one round of ammunition is fired each time the trigger is pulled, as the pistol's fire control group disconnects the trigger mechanism from the firing pin/striker until the trigger has been released and reset.

A repeating rifle is a single-barreled rifle capable of repeated discharges between each ammunition reload. This is typically achieved by having multiple cartridges stored in a magazine and then fed individually into the chamber by a reciprocating bolt, via either a manual or automatic action mechanism, while the act of chambering the round typically also recocks the hammer/striker for the following shot. In common usage, the term "repeating rifle" most often refers specifically to manual repeating rifles, as opposed to self-loading rifles, which use the recoil, gas, or blowback of the previous shot to cycle the action and load the next round, even though all self-loading firearms are technically a subcategory of repeating firearms.

<span class="mw-page-title-main">Lever action</span> Type of firearm action

A lever action is a type of action for repeating firearms that uses a manually operated cocking handle located around the trigger guard area that pivots forward to move the bolt via internal linkages, which will feed and extract cartridges into and out of the chamber, and cock the firing pin mechanism. This contrasts to other type of repeating actions such as the bolt-action, pump-action, semi-automatic, fully automatic, and/or burst mode actions. A firearm using this operating mechanism is colloquially referred to as a levergun.

<span class="mw-page-title-main">Selective fire</span> Firearm adjustment

Selective fire, or select fire, is the capability of a weapon to be adjusted to fire in semi-automatic, fully automatic, and/or burst mode. The modes are chosen by means of a selector switch, which varies depending on the weapon's design. Some selective-fire weapons have burst fire mechanisms to limit the maximum number of shots fired automatically in this mode. The most common limits are two or three rounds per trigger pull. Fully automatic fire refers to the ability for a weapon to fire continuously until either the feeding mechanism is emptied or the trigger is released. Semi-automatic refers to the ability to fire one round per trigger pull.

<span class="mw-page-title-main">Breechblock</span> Part of the firearm action

A breechblock is the part of the firearm action that closes the breech of a breech loading weapon before or at the moment of firing. It seals the breech and contains the pressure generated by the ignited propellant. Retracting the breechblock allows the chamber to be loaded with a cartridge.

A gunstock or often simply stock, the back portion of which is also known as a shoulder stock, a buttstock, or simply a butt, is a part of a long gun that provides structural support, to which the barrel, action, and firing mechanism are attached. The stock also provides a means for the shooter to firmly brace the gun and easily aim with stability by being held against the user's shoulder when shooting the gun, and helps to counter muzzle rise by transmitting recoil straight into the shooter's body.

<span class="mw-page-title-main">Trigger (firearms)</span> Mechanism that activates a gun

A trigger is a mechanism that actuates the function of a ranged weapon such as a firearm, airgun, crossbow, or speargun. The word may also be used to describe a switch that initiates the operation of other non-shooting devices such as a trap, a power tool, or a quick release. A small amount of energy applied to the trigger leads to the release of much more energy.

<span class="mw-page-title-main">Hammerless</span> Firearm design lacking an external hammer

A hammerless firearm is a firearm that lacks an exposed hammer or hammer spur. Although it may not literally lack a hammer, it lacks an external hammer that the user can manipulate directly. One of the disadvantages of an exposed hammer spur is the tendency for it to get caught on items such as clothing; covering the hammer by removing the hammer spur reduces this from occurring.

<span class="mw-page-title-main">Break action</span> Type of firearm action

Break action is a type of firearm action in which the barrel(s) are hinged much like a door and rotate perpendicularly to the bore axis to expose the breech and allow loading and unloading of cartridges. A separate operation may be required for the cocking of a hammer to fire the new round. There are many types of break-action firearms; break actions are universal in double-barreled shotguns, double-barreled rifles, combination guns, and are commonly found in single shot pistols, rifles, shotguns, including flare guns, grenade launchers, air guns, and some older revolver designs. They are also known as hinge-action, break-open, break-barrel, break-top, or, on old revolvers, top-break actions.

The following are terms related to firearms and ammunition topics.

<span class="mw-page-title-main">Multiple-barrel firearm</span> Type of firearm with more than one barrel

A multiple-barrel firearm is any type of firearm with more than one gun barrel, usually to increase the rate of fire or hit probability and to reduce barrel erosion or overheating.

<span class="mw-page-title-main">Repeating firearm</span> Firearms that can be discharged multiple times after a single ammunition reload

A repeating firearm or repeater is any firearm that is capable of being fired repeatedly before having to be manually reloaded with new ammunition into the firearm.

References

  1. Loadman, John; James, Francis (2009), The Hancocks of Marlborough: Rubber, Art and the Industrial Revolution - A Family of Inventive Genius, p. 89, ISBN   978-0-19-957355-4
  2. March 17 - Today in Science History
  3. How rubber bands are made. This reference states that the rubber is vulcanized before it is extruded. The rubber is then "cured" on mandrels.[ unreliable source? ][ failed verification ] The "Made How" reference appears to directly copy text from other sources, some of which appears to be incorrect. The exact same text regarding Thomas Hancock appears in a 1995 book entitled "CD's, super glue and salsa: how everyday products are made" by Kathleen Witman, Kyung-Sun Lim, Neil Schlager. Contradicting other sources, both credit Thomas Perry rather than Stephen Perry for the invention of the rubber band.
  4. "Stuart A. Burton Jr. @stuart_the_curious Instagram Profile | Picbear". picbear.online. Retrieved 2018-06-21.