Siddeley-Deasy R.T.1

Last updated

R.T.1
Role Reconnaissance
National origin United Kingdom
Manufacturer Siddeley-Deasy
DesignerJohn Lloyd
First flightLate 1917
Number built3
Developed from Royal Aircraft Factory R.E.8

The Siddeley Deasy R.T.1 was designed in 1917 as a R.E.8 replacement. Like the R.E.8, it was a two-seat single-engined biplane built for reconnaissance work.

Contents

Development

During World War I, the car makers Siddeley-Deasy had been one of several manufacturers of the Royal Aircraft Factory R.E.8. Though this aircraft was produced in large numbers, it was rumoured that the upper wing could fail in dives and that its spinning characteristics were dangerous. The R.T.1, the first of Siddeley Deasy's own designs set out to answer these criticisms in an aircraft of better performance. [1]

The main difference between the R.T.1 and the R.E.8 was in the wings, which were completely new. The large overhang of the R.E.8's upper wing, the source of the structural concerns, was gone and the R.T.1 was a two bay biplane with equal span constant chord wings, though the lower ones were significantly narrower than the upper. There were only small changes to the R.E.8 fuselage: the decking aft of the gunner, together with his gun-ring were raised, and the fin and rudder were larger and more rounded. [1]

Only three R.T.1s were built, differing chiefly in their engines. The first and third were powered by a 200 hp (150 kW) Hispano-Suiza and the second by the 150 hp (110 kW) RAF 4A also used in the R.E.8. The Hispano-Suiza installations differed in their nose and radiator arrangements: the first used a rectangular nose radiator like that of the S.E.5, whereas the third had a neatly rounded nose with a small chin radiator. The ailerons on the third aircraft were extended beyond the wing-tips to allow horn balancing. [1]

Direct comparisons of the RAF 4A powered R.T.1 and the R.E.8 showed the former had much the same top speed but better climb and ceiling because of its lower wing loading. The more powerful engine in the third R.T.1 increased the speed by some 10 mph (16 mph) and the ceiling by 2000 ft over the second machine. [1]

The R.T.1 flew well and one went for service trials on the Front, the other two going to training units, but with the war at its end there was no chance of further orders. [1]

Specifications (Third aircraft)

Data from Armstrong Whitworth Aircraft since 1913 [2]

General characteristics

Performance

Armament

Related Research Articles

<span class="mw-page-title-main">AD Flying Boat</span> Type of aircraft

The AD Flying Boat was designed by the British Admiralty's Air Department to serve as a patrol aircraft that could operate in conjunction with Royal Navy warships. Intended for use during the First World War, production of the aircraft was terminated as the end of the war came into sight, and the type saw little operational use. A number were repurchased after the end of the war by Supermarine Aviation and rebuilt as civil transports, becoming known as the Supermarine Channel.

<span class="mw-page-title-main">Bristol F.2 Fighter</span> British fighter aircraft used in World War One

The Bristol F.2 Fighter is a British First World War two-seat biplane fighter and reconnaissance aircraft developed by Frank Barnwell at the Bristol Aeroplane Company. It is often simply called the Bristol Fighter, "Brisfit" or "Biff".

<span class="mw-page-title-main">Royal Aircraft Factory R.E.8</span> Royal Aircraft Factory First World War reconnaissance biplane

The Royal Aircraft Factory R.E.8 is a British two-seat biplane reconnaissance and bomber aircraft of the First World War that was designed and produced at the Royal Aircraft Factory. It was also built under contract by Austin Motors, Daimler, Standard Motors, Siddeley-Deasy and the Coventry Ordnance Works.

<span class="mw-page-title-main">Siddeley-Deasy</span> British automobile, aero engine & aircraft company

The Siddeley-Deasy Motor Car Company Limited was a British automobile, aero engine and aircraft company based in Coventry in the early 20th century. It was central to the formation, by merger and buy-out, of the later Armstrong Siddeley Motor and Armstrong Whitworth Aircraft companies.

<span class="mw-page-title-main">Fiat CR.1</span> Italian fighter aircraft

The Fiat CR.1 was an Italian biplane fighter aircraft of the 1920s. Of wood-and-fabric construction, it was designed by Celestino Rosatelli, from whom it gained the 'CR' designation. Its most distinctive feature was that the lower wings were longer than the upper ones.

<span class="mw-page-title-main">Armstrong Whitworth Starling</span> Type of aircraft

The Armstrong Whitworth A.W.14 Starling was a prototype British single-seat biplane fighter developed for the Royal Air Force in the late 1920s which unsuccessfully competed against the Bristol Bulldog.

<span class="mw-page-title-main">Caudron R.4</span> French WW1 reconnaissance aircraft

The Caudron R.4 was a French World War I twin-engine biplane reconnaissance/artillery cooperation aircraft and the progenitor of a series of successful aircraft that filled a variety of roles with the French Aéronautique Militaire.

<span class="mw-page-title-main">Bartel BM 6</span> Type of aircraft

The Bartel BM 6 was a Polish biplane trainer fighter aircraft of 1930. It did not advance beyond the prototype stage.

The Blériot-SPAD S.81 was a French fighter aircraft developed in 1923 to a requirement by the French Air Force. It was flown competitively against the Dewoitine D.1 and was selected over that aircraft due to the Dewoitine's more radical design, leading to an order for 80 aircraft. The S.81 was a single-bay biplane of conventional configuration with I-shaped interplane struts and lacking Herbemont's usual swept upper wing. It featured a wooden fuselage of monocoque construction and metal wings skinned in fabric. Production versions differed from the prototypes in having a lengthened fuselage and larger tail fin.

<span class="mw-page-title-main">Caudron R.11</span> French WW1 fighter aircraft

The Caudron R.11, was a French three-seat twin-engine long range escort fighter biplane developed and produced by Caudron during the First World War.

<span class="mw-page-title-main">Vickers Vampire</span> Type of aircraft

The Vickers F.B.26 Vampire was a British single-seat pusher biplane fighter built by Vickers during the First World War.

<span class="mw-page-title-main">Lioré et Olivier LeO H-13</span> Type of aircraft

The Lioré et Olivier LéO H-13 was a French biplane two-engine flying boat of the 1920s, built in passenger and military variants.

<span class="mw-page-title-main">Armstrong Whitworth A.W.19</span> British single-engine biplane

The Armstrong Whitworth A.W.19 was a two/three-seat single-engine biplane, built as a general-purpose military aircraft in the mid-1930s. A newer, monoplane aircraft was preferred and only one A.W.19 was built.

The Siddeley-Deasy Sinaia, also known as the Armstrong Whitworth Sinaia was a twin-engined biplane day bomber with gunners in rearwards extensions of the engine nacelles. Two examples were ordered by the Air Ministry but only one was completed.

The Saunders T.1 was the first aircraft built by the Saunders Company, a two-seat single-engined biplane with unusual monocoque fuselage construction. Only one was built.

The Gabardini G.8 was an Italian single-seat aircraft produced in both fighter and trainer versions by Gabardini in 1923.

<span class="mw-page-title-main">Potez X</span> 1920s French transport aircraft

The Potez X was a French 1920s general-purpose colonial transport aircraft designed and built by Potez.

The Adolphe Bernard AB was a twin-engined French biplane aircraft, built near the end of the First World War. Ten AB 1 BN2 bombers were produced for the Armée de l'Air but did not reach squadron service; post-war, two civil derivatives were considered but only one aircraft was built.

<span class="mw-page-title-main">Blériot-SPAD S.91</span> Type of aircraft

The Blériot-SPAD S.91 was a French light-weight fighter aircraft. It would be later developed into the Blériot-SPAD S.510, the last biplane produced by the French aeronautic industries.

<span class="mw-page-title-main">Astra-Protopopescu</span> Romanian reconnaissance aircraft prototype

The Astra-Protopopescu or Astra-Proto was a Romanian reconnaissance aircraft flown and tested in 1925.

References

Notes

  1. 1 2 3 4 5 Tapper 1973 , pp. 110–112, 116
  2. Tapper 1973, p. 116
  3. 1 2 Bruce 1957, pp. 511–512

Bibliography