Slipware

Last updated
Jar, Giyan IV type, Western Iran, 2500-2000 BC, earthenware with slip-painted decoration Jar, Giyan IV type, Western Iran, 2500-2000 BC, earthenware with slip-painted decoration - Cincinnati Art Museum - DSC03958.JPG
Jar, Giyan IV type, Western Iran, 2500-2000 BC, earthenware with slip-painted decoration
Charger with Charles II in the Boscobel Oak, English, c. 1685. Such large plates, for display rather than use, take slip-trailing to an extreme, building up lattices of thick trails of slip. Charger of Charles II in the Boscobel Oak LACMA M.86.151.jpg
Charger with Charles II in the Boscobel Oak, English, c. 1685. Such large plates, for display rather than use, take slip-trailing to an extreme, building up lattices of thick trails of slip.

Slipware is pottery identified by its primary decorating process where slip is placed onto the leather-hard (semi-hardened) clay body surface before firing by dipping, painting or splashing. Slip is an aqueous suspension of a clay body, which is a mixture of clays and other minerals such as quartz, feldspar and mica. The slip placed onto a wet or leather-hard clay body surface by a variety of techniques including dipping, painting, piping or splashing. [1] Slipware is the pottery on which slip has been applied either for glazing or decoration. Slip is liquified clay or clay slurry, with no fixed ratio of water and clay, which is used either for joining pottery pieces together by slip casting with mould, glazing or decorating the pottery by painting or dipping the pottery with slip. [2]

Contents

Principal techniques include slip painting, where the slip is treated like paint and used to create a design with brushes or other implements, and slip trailing, where the slip, usually rather thick, is dripped, piped or trailed onto the body, typically from some device like the piping bag used to decorate cakes. The French term for slip is barbotine, and this term may be used for both techniques, but usually from different periods. [3]

Often only pottery where the slip creates patterns or images will be described as slipware, as opposed to the many types where a plain slip is applied to the whole body, for example most fine wares in Ancient Roman pottery, such as African red slip ware (note: "slip ware" not "slipware"). Decorative slips may be a different colour than the underlying clay body or offer other decorative qualities. Selectively applying layers of colored slips can create the effect of a painted ceramic, such as in the black-figure or red-figure pottery styles of Ancient Greek pottery. Slip decoration is an ancient technique in Chinese pottery also, used to cover whole vessels over 4,000 years ago. [4]

History

Many prehistoric and historic cultures used slip as the primary decorating material on their ware, especially in early periods. These include most prehistoric cultures of the Middle East and much later Islamic pottery, cultures in many areas of Africa, most pottery-making cultures in the Americas, early Japanese (and later Onta ware) and much Korean pottery. Much Mycenean ware, Ancient Greek pottery and Ancient Roman pottery used slip, as did pre-industrialized potters in many areas of Europe, including Great Britain, most notably Thomas Toft in the Staffordshire Potteries. [5]

Later potters mostly combined or replaced the use of slip with ceramic glazes and pigments offering a tougher finish and a wider range of colours. But a variety of slipware techniques were revived by various studio pottery movements from the 19th century on. In England Bernard Leach and in America Mary Louise McLaughlin were among the leaders of these revivals. [6]

Techniques

A coating of white or coloured slip (sometimes called by the French term engobe in American English) can be applied to the whole body of the article, or just one part, such as outside or inside of a cup or jug, to improve its appearance, to give a smoother surface to a rough body, mask an inferior colour or for decorative effect. Slip can also be applied by painting techniques, in isolation or in several layers and colours. Sgraffito (or "sgraffiato") involves scratching through a layer of coloured slip to reveal a different colour or the base body underneath. Several layers of slip and/or sgraffito can be done while the pot is still in an unfired state. One colour of slip can be fired, before a second is applied, and prior to the scratching or incising decoration. This is particularly useful if the base body is not of the desired colour or texture. [7]

Chinese pottery also used techniques where patterns, images or calligraphy were created as part-dried slip was cut away to reveal a lower layer of slip or the main clay body in a contrasting colour. The latter of these is called the "cut-glaze" technique. [8]

Slipware may be carved or burnished to change the surface appearance of the ware. Specialized slip recipes may be applied to biscuit ware and then refired.

Examples

An example of slipware artifact is the Harvest jug.

See also

Notes

  1. Osborne, 746-747
  2. What is slip in pottery, thepotterywheel.com, accessed 10 July 2021.
  3. Osborne, 746-747
  4. Vainker, 17, 22-23
  5. Osborne, 746-747
  6. Osborne, 747
  7. Osborne, 746-747
  8. Vainker, 116-117

Related Research Articles

<span class="mw-page-title-main">Pottery</span> Craft of making objects from clay

Pottery is the process and the products of forming vessels and other objects with clay and other raw materials, which are fired at high temperatures to give them a hard and durable form. The place where such wares are made by a potter is also called a pottery. The definition of pottery, used by the ASTM International, is "all fired ceramic wares that contain clay when formed, except technical, structural, and refractory products". End applications include tableware, decorative ware, sanitaryware, and in technology and industry such as electrical insulators and laboratory ware. In art history and archaeology, especially of ancient and prehistoric periods, pottery often means vessels only, and sculpted figurines of the same material are called terracottas.

<span class="mw-page-title-main">Longquan celadon</span> Type of green-glazed Chinese ceramic

Longquan celadon (龍泉青瓷) is a type of green-glazed Chinese ceramic, known in the West as celadon or greenware, produced from about 950 to 1550. The kilns were mostly in Lishui prefecture in southwestern Zhejiang Province in the south of China, and the north of Fujian Province. Overall a total of some 500 kilns have been discovered, making the Longquan celadon production area one of the largest historical ceramic producing areas in China. "Longquan-type" is increasingly preferred as a term, in recognition of this diversity, or simply "southern celadon", as there was also a large number of kilns in north China producing Yaozhou ware or other Northern Celadon wares. These are similar in many respects, but with significant differences to Longquan-type celadon, and their production rose and declined somewhat earlier.

<span class="mw-page-title-main">Lustreware</span> Pottery with a reflective or iridescent surface

Lustreware or lusterware is a type of pottery or porcelain with a metallic glaze that gives the effect of iridescence. It is produced by metallic oxides in an overglaze finish, which is given a second firing at a lower temperature in a "muffle kiln", or a reduction kiln, excluding oxygen.

<span class="mw-page-title-main">Islamic pottery</span>

Medieval Islamic pottery occupied a geographical position between Chinese ceramics, the unchallenged leaders of Eurasian production, and the pottery of the Byzantine Empire and Europe. For most of the period it can fairly be said to have been between the two in terms of aesthetic achievement and influence as well, borrowing from China and exporting to and influencing Byzantium and Europe. The use of drinking and eating vessels in gold and silver, the ideal in ancient Rome and Persia as well as medieval Christian societies, is prohibited by the Hadiths, with the result that pottery and glass were used for tableware by Muslim elites, as pottery also was in China but was much rarer in Europe and Byzantium. In the same way, Islamic restrictions greatly discouraged figurative wall-painting, encouraging the architectural use of schemes of decorative and often geometrically patterned titles, which are the most distinctive and original specialty of Islamic ceramics.

<span class="mw-page-title-main">Slip casting</span> Technique for forming pottery

Slip casting, or slipcasting, is a ceramic forming technique, and is widely used for shapes that can not easily be formed by other techniques. The technique involves a clay body slip, usually prepared in a blunger, being poured into plaster moulds and allowed to form a layer, the cast, on the internal walls of the mould.

<span class="mw-page-title-main">Ding ware</span>

Ding ware, Ting ware or Dingyao are Chinese ceramics, mostly porcelain, that were produced in the prefecture of Dingzhou in Hebei in northern China. The main kilns were at Jiancicun or Jianci in Quyang County. They were produced between the Tang and Yuan dynasties of imperial China, though their finest period was in the 11th century, under the Northern Song. The kilns "were in almost constant operation from the early eighth until the mid-fourteenth century."

<span class="mw-page-title-main">Barbotine</span>

Barbotine is the French for ceramic slip, or a mixture of clay and water used for moulding or decorating pottery. In English the term is used for three different techniques of decorating pottery, though in all cases mainly for historical works. For clarity, these types are numbered here as A-C.

<span class="mw-page-title-main">Chinese ceramics</span> Pottery and porcelain from China

Chinese ceramics show a continuous development since pre-dynastic times and are one of the most significant forms of Chinese art and ceramics globally. The first pottery was made during the Palaeolithic era. Chinese ceramics range from construction materials such as bricks and tiles, to hand-built pottery vessels fired in bonfires or kilns, to the sophisticated Chinese porcelain wares made for the imperial court and for export. Porcelain was a Chinese invention and is so identified with China that it is still called "china" in everyday English usage.

<span class="mw-page-title-main">Ceramic glaze</span> Fused coating on ceramic objects

Ceramic glaze, or simply glaze, is a glassy coating on ceramics. It is used for decoration, to ensure the item is impermeable to liquids and to minimise the adherence of pollutants.

<span class="mw-page-title-main">Overglaze decoration</span> Method of decorating pottery

Overglaze decoration, overglaze enamelling or on-glaze decoration is a method of decorating pottery, most often porcelain, where the coloured decoration is applied on top of the already fired and glazed surface, and then fixed in a second firing at a relatively low temperature, often in a muffle kiln. It is often described as producing "enamelled" decoration. The colours fuse on to the glaze, so the decoration becomes durable. This decorative firing is usually done at a lower temperature which allows for a more varied and vivid palette of colours, using pigments which will not colour correctly at the high temperature necessary to fire the porcelain body. Historically, a relatively narrow range of colours could be achieved with underglaze decoration, where the coloured pattern is applied before glazing, notably the cobalt blue of blue and white porcelain.

<span class="mw-page-title-main">Slip (ceramics)</span> Slurry of clay and water

A slip is a clay slurry used to produce pottery and other ceramic wares. Liquified clay, in which there is no fixed ratio of water and clay, is called slip or clay slurry which is used either for joining leather-hard (semi-hardened) clay body together by slipcasting with mould, glazing or decorating the pottery by painting or dipping the pottery with slip. Pottery on which slip has been applied either for glazing or decoration is called the slipware.

This is a list of pottery and ceramic terms.

<i>Sancai</i>

Sancai is a versatile type of decoration on Chinese pottery using glazes or slip, predominantly in the three colours of brown, green, and a creamy off-white. It is particularly associated with the Tang Dynasty (618–907) and its tomb figures, appearing around 700. Therefore, it is commonly referred to as Chinese: 唐三彩 Tang Sancai in Chinese. Tang sancai wares were sometimes referred in China and the West as egg-and-spinach by dealers, for their use of green, yellow, and white, especially when combined with a streaked effect.

<span class="mw-page-title-main">Qingbai ware</span> Type of Chinese porcelain

Qingbai ware is a type of Chinese porcelain produced under the Song Dynasty and Yuan dynasty, defined by the ceramic glaze used. Qingbai ware is white with a blue-greenish tint, and is also referred to as Yingqing. It was made in Jiangxi province in south-eastern China, in several locations including Jingdezhen, and is arguably the first type of porcelain to be produced on a very large scale. However, it was not at the time a prestigious ware, and was mostly used for burial wares and exports, or a middle-rank Chinese market. The quality is very variable, reflecting these different markets; the best pieces can be very thin-walled.

<span class="mw-page-title-main">Chinese influences on Islamic pottery</span> An overview

Chinese influences on Islamic pottery cover a period starting from at least the 8th century CE to the 19th century. This influence of Chinese ceramics has to be viewed in the broader context of the considerable importance of Chinese culture on Islamic arts in general.

<span class="mw-page-title-main">Cizhou ware</span>

Cizhou ware or Tz'u-chou ware is a term for a wide range of Chinese ceramics from between the late Tang dynasty and the early Ming dynasty, but especially associated with the Northern Song to Yuan period in the 11–14th century. It has been increasingly realized that a very large number of sites in northern China produced these wares, and their decoration is very variable, but most characteristically uses black and white, in a variety of techniques. For this reason Cizhou-type is often preferred as a general term. All are stoneware in Western terms, and "high-fired" or porcelain in Chinese terms. They were less high-status than other types such as celadons and Jun ware, and are regarded as "popular", though many are finely and carefully decorated.

<span class="mw-page-title-main">Redware</span> Various types of red-colored pottery

Redware as a single word is a term for at least two types of pottery of the last few centuries, in Europe and North America. Red ware as two words is a term used for pottery, mostly by archaeologists, found in a very wide range of places. However, these distinct usages are not always adhered to, especially when referring to the many different types of pre-colonial red wares in the Americas, which may be called "redware".

<span class="mw-page-title-main">China painting</span> Art of painting on ceramics

China painting, or porcelain painting, is the decoration of glazed porcelain objects such as plates, bowls, vases or statues. The body of the object may be hard-paste porcelain, developed in China in the 7th or 8th century, or soft-paste porcelain, developed in 18th-century Europe. The broader term ceramic painting includes painted decoration on lead-glazed earthenware such as creamware or tin-glazed pottery such as maiolica or faience.

<span class="mw-page-title-main">Ceramic art</span> Decorative objects made from clay and other raw materials by the process of pottery

Ceramic art is art made from ceramic materials, including clay. It may take forms including artistic pottery, including tableware, tiles, figurines and other sculpture. As one of the plastic arts, ceramic art is one of the visual arts. While some ceramics are considered fine art, such as pottery or sculpture, most are considered to be decorative, industrial or applied art objects. Ceramics may also be considered artefacts in archaeology. Ceramic art can be made by one person or by a group of people. In a pottery or ceramic factory, a group of people design, manufacture and decorate the art ware. Products from a pottery are sometimes referred to as "art pottery". In a one-person pottery studio, ceramists or potters produce studio pottery.

<span class="mw-page-title-main">Werra and Weser Slipware</span> Slip-decorated earthenware made in Germany

Werra ware and Weser ware are related classes of slip-decorated earthenware made in central Germany from the second half of the sixteenth century to the first half of the seventeenth century. Werra and Weser wares were part of a wider flourishing movement of Renaissance slipware manufacture in Europe which began in the early sixteenth century. This included the French pottery of Beauvais and Saintonge, North Holland slipware and similar wares made in other parts of the German-speaking lands, as well as in Switzerland, Poland and Hungary. In Britain, imports of these and similar wares are thought to have influenced the slip-trailed ‘Metropolitan’ pottery made in Harlow, Essex, throughout the seventeenth century as well as some Staffordshire and other wares.

References

Commons-logo.svg Media related to Slipware at Wikimedia Commons