Superior Air Parts Vantage

Last updated

Vantage
Superior Vantage.jpg
TypePiston aircraft engine
National origin United States
Manufacturer Superior Air Parts
Major applications Cessna 172
Produced2004-present
Developed from Superior Air Parts XP-360

The Superior Air Parts Vantage is a type certified piston aircraft engine developed by Superior Air Parts of Coppell, Texas, United States and based upon the non-certified Superior Air Parts XP-360. The design is officially designated the Superior Air Parts O-360 and IO-360. Vantage is a marketing name. [1] [2]

Contents

The company is owned by the Chinese company Superior Aviation Beijing, which is 60% owned by Chairman Cheng Shenzong and 40% owned by Beijing E-Town, an economic development agency of the municipal government of Beijing.

Development

The Vantage engine is a development of the XP-360 experimental engine that was put through the US Federal Aviation Administration engine type certification process starting in 1996. Certification was based on FAR 33 through amendment 20, effective 13 December 2000, application 17 July 2001 and certification was achieved on 31 March 2004. The initial time between overhauls was set at 1,000 hours, with an aim of expanding that to 2,000 hours. [1] [3] [4]

Design

The engine is a four-cylinder, horizontally opposed, four-stroke, 361 cu in (5,916 cc) displacement, air-cooled, direct-drive, gasoline engine design. It produces 165 to 180 hp (123 to 134 kW), depending on the model. It is available in carburetor-equipped and fuel injected versions. [2]

Variants

O-360

180 hp models

O-360-A1A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and a basic dry weight of 288 lb (131 kg). [2]
O-360-A2A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and a basic dry weight of 288 lb (131 kg). [2]
O-360-A3A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 288 lb (131 kg). [2]
O-360-A4A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-A5A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-A6A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B1A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B2A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B3A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speedh propeller, and a conical style engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B4A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B5A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B6A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a conical engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-C1A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-C2A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-C3A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-C4A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-C5A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-C6A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D1A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D2A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D3A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a conical style engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D4A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D5A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D6A2
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a conical engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-E1A2
Carburetor-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 295 lb (134 kg). [2]
O-360-E2A2
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 295 lb (134 kg). [2]
O-360-E3A2
Carburetor-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 295 lb (134 kg). [2]
O-360-E4A2
Carburetor-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 298 lb (135 kg). [2]
O-360-E5A2
Carburetor-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 298 lb (135 kg). [2]
O-360-E6A2
Carburetor-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a conical engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 298 lb (135 kg). [2]

168 hp models

O-360-A1A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and a basic dry weight of 288 lb (131 kg). [2]
O-360-A2A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and a basic dry weight of 288 lb (131 kg). [2]
O-360-A3A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 288 lb (131 kg). [2]
O-360-A4A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-A5A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B1A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B2A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B3A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speedh propeller, and a conical style engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B4A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B5A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-B6A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a conical engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-C1A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-C2A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-C3A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 291 lb (132 kg). [2]
O-360-C4A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-C5A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-C6A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D1A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D2A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D3A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a conical style engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D4A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D5A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-D6A1
Carburetor-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a conical engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 294 lb (133 kg). [2]
O-360-E1A1
Carburetor-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 295 lb (134 kg). [2]
O-360-E2A1
Carburetor-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 295 lb (134 kg). [2]
O-360-E3A1
Carburetor-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 295 lb (134 kg). [2]
O-360-E4A1
Carburetor-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 298 lb (135 kg). [2]
O-360-E5A1
Carburetor-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 298 lb (135 kg). [2]
O-360-E6A1
Carburetor-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a conical engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 298 lb (135 kg). [2]

IO-360

180 hp models

IO-360-A1A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and a basic dry weight of 290 lb (132 kg). [2]
IO-360-A2A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and a basic dry weight of 290 lb (132 kg). [2]
IO-360-A3A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 290 lb (132 kg). [2]
IO-360-A4A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-A5A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-A6A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B1A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B2A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B3A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speedh propeller, and a conical style engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B4A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B5A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B6A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a conical engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-C1A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-C2A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-C3A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-C4A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-C5A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-C6A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D1A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D2A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D3A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a conical style engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D4A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D5A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D6A2
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a conical engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-E1A2
Fuel injection-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 297 lb (135 kg). [2]
IO-360-E2A2
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 297 lb (135 kg). [2]
IO-360-E3A2
Fuel injection-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 297 lb (135 kg). [2]
IO-360-E4A2
Fuel injection-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 300 lb (140 kg). [2]
IO-360-E5A2
Fuel injection-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 300 lb (140 kg). [2]
IO-360-E6A2
Fuel injection-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a conical engine mount for a front propeller governor, that produces 180 hp (134 kW) at 2700 rpm, with a compression ratio of 8.5:1 and with a basic dry weight of 300 lb (140 kg). [2]

168 hp models

IO-360-A1A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and a basic dry weight of 290 lb (132 kg). [2]
IO-360-A2A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and a basic dry weight of 290 lb (132 kg). [2]
IO-360-A3A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 290 lb (132 kg). [2]
IO-360-A4A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-A5A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-A6A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B1A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B2A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B3A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speedh propeller, and a conical style engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B4A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B5A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-B6A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a constant speed propeller, and a conical engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-C1A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-C2A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-C3A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 293 lb (133 kg). [2]
IO-360-C4A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-C5A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-C6A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a fixed pitch propeller, and a conical engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D1A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D2A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D3A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a conical style engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D4A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D5A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-D6A1
Fuel injection-equipped model with a heavy wall front main bearing journal crankshaft, for a constant speed propeller, and a conical engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 296 lb (134 kg). [2]
IO-360-E1A1
Fuel injection-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 297 lb (135 kg). [2]
IO-360-E2A1
Fuel injection-equipped model with a thin wall front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 297 lb (135 kg). [2]
IO-360-E3A1
Fuel injection-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a conical style engine mount for a rear propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 297 lb (135 kg). [2]
IO-360-E4A1
Fuel injection-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 1 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 300 lb (140 kg). [2]
IO-360-E5A1
Fuel injection-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a number 2 style dynafocal engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 300 lb (140 kg). [2]
IO-360-E6A1
Fuel injection-equipped model with a solid front main bearing journal crankshaft, for a fixed pitch propeller, and a conical engine mount for a front propeller governor, that produces 168 hp (125 kW) at 2700 rpm, with a compression ratio of 7.2:1 and with a basic dry weight of 300 lb (140 kg). [2]

Applications

Specifications (O-360-A1A2)

Data from TCDS [2]

General characteristics

Components

Performance

See also

Related lists

Related Research Articles

<span class="mw-page-title-main">Oldsmobile V8 engine</span> Motor vehicle engine

The Oldsmobile V8, also referred to as the Rocket, is series of engines that was produced by Oldsmobile from 1949 until 1990. The Rocket, along with the 1949 Cadillac V8, were the first post-war OHV crossflow cylinder head V8 engines produced by General Motors. Like all other GM divisions, Olds continued building its own V8 engine family for decades, adopting the corporate Chevrolet 350 small-block and Cadillac Northstar engine only in the 1990s. All Oldsmobile V8s were manufactured at plants in Lansing, Michigan while the engine block and cylinder heads were cast at Saginaw Metal Casting Operations.

<span class="mw-page-title-main">Hispano-Suiza 8</span> V-8 piston aircraft engine

The Hispano-Suiza 8 was a water-cooled V8 SOHC aero engine introduced by Hispano-Suiza in 1914, and was the most commonly used liquid-cooled engine in the aircraft of the Entente Powers during the First World War. The original Hispano-Suiza 8A was rated at 140 hp (100 kW) and the later, larger displacement Hispano-Suiza 8F reached 330 hp (250 kW).

<span class="mw-page-title-main">Lycoming O-235</span> Family of four-cylinder, air-cooled, horizontally opposed piston engine

The Lycoming O-235 is a family of four-cylinder, air-cooled, horizontally opposed piston aircraft engines that produce 100 to 135 hp, derived from the earlier O-233 engine.

<span class="mw-page-title-main">Lycoming O-320</span> American aircraft engine

The Lycoming O-320 is a large family of naturally aspirated, air-cooled, four-cylinder, direct-drive engines produced by Lycoming Engines. They are commonly used on light aircraft such as the Cessna 172 and Piper Cherokee. Different variants are rated for 150 or 160 horsepower. As implied by the engine's name, its cylinders are arranged in horizontally opposed configuration and a displacement of 320 cubic inches (5.24 L).

<span class="mw-page-title-main">Lycoming O-540</span> Family of flat-six piston aircraft engines

The Lycoming O-540 is a family of air-cooled six-cylinder, horizontally opposed fixed-wing aircraft and helicopter engines of 541.5 cubic inches (8,874 cc) displacement, manufactured by Lycoming Engines. The engine is a six-cylinder version of the four-cylinder Lycoming O-360.

<span class="mw-page-title-main">Continental O-240</span> 1970s American aircraft piston engine

The Continental O-240 engine is a four-cylinder, horizontally opposed, air-cooled aircraft engine that was developed in the late 1960s for use in light aircraft by Continental Motors, Inc. The first O-240 was certified on 7 July 1971.

<span class="mw-page-title-main">Continental IO-360</span> Aircraft engines manufactured by Continental Motors

The Continental IO-360 is a family of fuel-injected air-cooled, horizontally opposed six-cylinder aircraft engines manufactured by Continental Motors in the United States of America, now part of AVIC International since 2010.

<span class="mw-page-title-main">Continental O-470</span> 6-cylinder air-cooled aircraft engine

The Continental O-470 engine is a family of carbureted and fuel-injected six-cylinder, horizontally opposed, air-cooled aircraft engines that was developed especially for use in light aircraft by Continental Motors. Engines designated "IO" are fuel-injected.

<span class="mw-page-title-main">Continental IO-550</span> American piston aircraft engine

The Continental IO-550 engine is a large family of 9 liter fuel injected six-cylinder, horizontally opposed, air-cooled aircraft engines that were developed for use in light aircraft by Teledyne Continental Motors. The first IO-550 was delivered in 1983 and the type remains in production.

<span class="mw-page-title-main">Lycoming IO-580</span>

The Lycoming IO-580 engine is a horizontally opposed, six-cylinder aircraft engine featuring three cylinders per side, manufactured by Lycoming Engines.

The Lycoming GSO-580 is a family of eight-cylinder horizontally opposed, supercharged, carburetor-equipped aircraft engines for both airplanes and helicopters, manufactured by Lycoming Engines in the late 1950s and early 1960s.

<span class="mw-page-title-main">Lycoming IO-390</span>

The Lycoming IO-390 engine is a horizontally opposed, four-cylinder aircraft engine, manufactured by Lycoming Engines.

<span class="mw-page-title-main">Lycoming O-480</span>

The Lycoming O-480 is a family of six-cylinder, horizontally opposed fixed-wing aircraft engines of 479.6 cubic inch displacement, made by Lycoming Engines. The engine is a six-cylinder version of the four-cylinder Lycoming O-320.

<span class="mw-page-title-main">Lycoming O-435</span> American 1940s aircraft engine

The Lycoming O-435 is an American six-cylinder, horizontally opposed fixed-wing aircraft and helicopter engine made by Lycoming Engines. The engine is a six-cylinder version of the four-cylinder Lycoming O-290.

The Lycoming O-340 is a family of four-cylinder horizontally opposed, carburetor-equipped aircraft engines, that was manufactured by Lycoming Engines in the mid-1950s.

The Hirth HM 512 was a 12-cylinder development of the earlier, 6-cylinder HM 506, produced in the late 1930s. Both were supercharged, inverted V, air-cooled engines.

<span class="mw-page-title-main">Packard X-2775</span> Experimental aircraft engine

The Packard X-2775 was an American experimental liquid-cooled aircraft engine. The engine was constructed as a single crankcase with four banks of six cylinders in what is close to an X-configuration. The engine consisted of two 60° V12 engines, one upright and one inverted, sharing a common crankcase. Although technically incorrect, the engine has been characterized as two Packard 1A-1500 V-12 engines coupled with a mutual crankcase.

The Continental IO-370 engine is a family of fuel injected four-cylinder, horizontally opposed, air-cooled aircraft engines that were developed for use in light aircraft by Continental Aerospace Technologies. There is no carbureted version of this engine, which would have been designation O-370, therefore the base model is the IO-370.

<span class="mw-page-title-main">Isotta Fraschini Asso Caccia</span>

The Isotta Fraschini Asso Caccia, a.k.a. Isotta Fraschini Asso-450 Caccia, was an air-cooled, supercharged V12 piston aero engine produced in the late 1920s and early 1930s by Italian manufacturer Isotta Fraschini.

References

  1. 1 2 Escobar, Joe (1 May 2004). "New Kid on Block". aviationpros.com. Retrieved 22 August 2014.
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 Federal Aviation Administration (20 July 2016). "Type Certificate Data Sheet No. E00001SC" (PDF). Retrieved 17 April 2018.
  3. Superior Air Parts. "Vantage Engine". superiorairparts.com. Retrieved 22 August 2014.
  4. Federal Aviation Administration (31 March 2004). "Type certificate E00001SC" (PDF). Retrieved 17 April 2018.
  5. Superior Air Parts. "Superior Skyhawk SV". superiorairparts.com. Retrieved 17 April 2018.