Sydney Metro Metropolis Stock | |
---|---|
In service | 2019–present |
Manufacturer | Alstom |
Designer | Xavier Allard [1] |
Built at | Sri City, India |
Family name | Metropolis |
Constructed |
|
Entered service | 26 May 2019 |
Number under construction | 4 sets [3] |
Number built | 41 sets [3] |
Number in service | 26 sets [3] |
Formation | 6 car sets TC–MPC–MC–MC–MPC–TC [4] |
Fleet numbers | 01 – 22 (first batch) 23 – 45 (second batch) |
Operators | Metro Trains Sydney |
Depots | |
Lines served | North West |
Specifications | |
Car body construction | Stainless steel |
Train length | 121.5 m (398 ft 7+15⁄32 in) |
Car length | 20.25 m (66 ft 5+1⁄4 in) |
Width | 3,035 mm (9 ft 11+1⁄2 in) |
Height | ~3.7 m (12 ft 1+11⁄16 in) |
Doors | 3 per side |
Maximum speed |
|
Weight | 240 t (240 long tons; 260 short tons) [5] |
Traction system | Alstom OPTONIX 2-level IGBT–VVVF [4] |
Traction motors | 16 × Alstom 4-ECA-2120 200 kW (270 hp) 3-phase AC induction motor [4] [6] |
Power output | 3.2 MW (4,300 hp) |
Electric system(s) | 1,500 V DC (nominal) from overhead catenary |
Current collector(s) | Pantograph |
UIC classification | 2′2′+Bo′Bo′+Bo′Bo′+Bo′Bo′+Bo′Bo′+2′2′ |
Braking system(s) | Electro-pneumatic |
Safety system(s) | Alstom Urbalis 400 moving block CBTC ATC under ATO GoA 4 (UTO), with subsystems of ATP, Iconis ATS and Smartlock CBI [4] |
Coupling system | Dellner |
Track gauge | 1,435 mm (4 ft 8+1⁄2 in) standard gauge |
The Sydney Metro Metropolis Stock is a class of electric multiple units that operate on the Sydney Metro network. Built by Alstom as part of their Metropolis family, the trains are the first fully automated passenger rolling stock in Australia as well as the first single-deck trainsets to operate in Sydney since their withdrawal from the suburban rail network in the 1990s. A total of 176 carriages, making up 22 6-car sets, entered service in 2019 with the opening of the Metro North West Line. 23 more sets are gradually being rolled out for the City & Southwest extension, to commence service in 2024, expanding the Metropolis fleet to 45 sets.
In June 2012, the North West Rail Link project (later Sydney Metro North West) announced that it would use single deck "Metro" style trains, rather than the double deck trains more commonly used in Sydney. [7] [8] In May 2013, Minister for Transport Gladys Berejiklian announced that two consortia had been shortlisted for the Operations and Train Systems (OTS) contract. The winning consortium would build the trains, install signalling and other electronic systems, as well as operate the line as a public–private partnership. [9]
In June 2014, Northwest Rapid Transit was selected by Transport for NSW for the OTS contract. [10] [11] [12] The $3.7 billion contract was formally awarded by the New South Wales Government in September 2014. [13]
Northwest Rapid Transit subsequently contracted Alstom to build 22 6-car automated Metropolis trainsets for the line, as well as install a communications-based train control (CBTC) signalling system at a cost of $1.7 billion. [14] [15]
In November 2015, the design of the train was unveiled by Minister for Transport Andrew Constance, [16] with the full-scale model of the train later displayed at public events such as the 2016 Sydney Royal Easter Show. [17] [18] It consisted of the front carriage, and was approximately 75% of the length of the final design, having two doors instead of three. [19]
The trains were manufactured at Alstom's rolling stock facility at Sri City in India, [20] [21] with the first train arriving in New South Wales in September 2017. [22] [23] In February 2018, dynamic testing on the first of the trainsets began. [24] Testing was done on brakes, passenger information displays, lighting and door operation. [25] In July 2018, Alstom was awarded a 15 year maintenance contract for the trains and the signalling system. [26] In December 2018, production of the 22 trainsets was completed. [27] On 14 January 2019, the first driverless Metro train completed the full journey between Tallawong and Chatswood. [28]
On 26 May 2019, the trains entered service on the Metro North West Line, [29] operated by Metro Trains Sydney, a joint venture between the MTR Corporation, John Holland and UGL Rail. [12]
In November 2019, the Northwest Rapid Transit public–private partnership was extended to cover the City & Southwest extension. As part of this contract expansion, Alstom would deliver an additional 23 6-car trainsets as well as signalling to serve the extension at a cost of €350 million ($563 million). [30] [31] The contract includes options for additional trains and extension of existing trains to 8 cars in length in future. [30] [31] By November 2022, four of these additional trainsets had entered service on the Metro North West Line, ahead of the opening of the City & Southwest extension. [32] In March 2024, it was announced that all 45 trains had been tested over the full length of the line. [33]
The under construction Sydney Metro Western Sydney Airport line will not use the Metropolis sets, with trains ordered from Siemens. [34] [35] As of April 2024 [update] , the rolling stock contract for Sydney Metro West has not been awarded. [34] [36]
Each single-deck train features two dedicated areas for prams, luggage and bicycles. There are three doorways per side per carriage and no internal gangway doors between the carriages. [37] In a 6-car configuration the trains have a seating capacity of 378 people, with a total capacity of 1,100. [38] The trains utilise Alstom's Urbalis 400 communications-based train control signalling system that ensures trains are capable of driving and operating automatically at all times without a driver or attendant on board, including door closing, obstacle detection and dealing with emergency situations. [39] [40]
The trains feature longitudinal 'bench-style' seating per carriage (similar to most metro rapid-transit/subway trains), with distinctly coloured seats for priority and disabled passengers. [41] Seats in wheelchair spaces can fold up in order to fit prams and wheelchairs. A doorway-status light is installed above each doorway, which illuminates white when the doors are fully closed, green when the doors are fully open, and flashes in red when the doors are opening or closing.
Features of the Metropolis sets include CCTV cameras, internal passenger information display (PID) screens and digital voice announcements. [42] The PID screens display the name of the next station, along with icons for available transport mode interchanges. The sets are also fitted with air conditioning and emergency help points. [42] There are also USB charging ports at the end of cars 01 and 02. [43] [44]
The Metropolis sets are operated via a control centre based at Rouse Hill. In the event the system is otherwise unable to operate the train, an engineer can manually take over the train's functions. The trains are maintained at the Sydney Metro Trains Facility at Rouse Hill, [45] with overnight stabling of trains at Sydney Metro Trains Facility South in Marrickville following the opening of the City & Southwest extension. [46]
The 270 Alstom Metropolis carriages will form 45 six-car sets. Individual vehicles are numbered as follows:[ citation needed ]
←Tallawong | Chatswood→ | |||||
01 : 45 | 0101 : 4501 | 0103 : 4503 | 0105 : 4505 | 0106 : 4506 | 0104 : 4504 | 0102 : 4502 |
Car 01 always faces the Tallawong end, while car 02 always faces the Chatswood end.
In the event that extensions to 8 cars happens if sufficient demand warrants the contract, two infill carriages will be added between cars 05 and 06.
The Lyon Metro is a rapid transit system serving Lyon Metropolis, France. First opened in 1974, it currently consists of four lines, serving 42 stations and comprising 34.4 kilometres (21.4 mi) of route. Part of the Transports en Commun Lyonnais (TCL) system of public transport, it is supported by two funiculars and a tramway network.
The Alstom Metropolis is a family of electric multiple units designed and produced by the French rolling stock manufacturer Alstom. It is designed for high capacity rapid transit or metro rail infrastructure systems. Trains can be run in various configurations, the length alone varying between two and ten cars; it is also suitable for both manned or unmanned operations.
UGL Rail is an Australian rail company specialising in building, maintaining and refurbishing diesel locomotives, diesel and electric multiple units and freight wagons. It is a subsidiary of UGL and is based in Melbourne, with a staff of 1,200 across Australia and Asia. It operates factories in Broadmeadow, Maintrain Auburn, Spotswood and Bassendean. While it used to operate a factory in Taree, the plant was shut down and the equipment sold off.
The Alstom Metropolis C830 is the first generation of communication-based train control (CBTC) electric multiple unit rolling stock in operation on the Circle line of Singapore's Mass Rapid Transit (MRT) system since 2009. Alstom was contracted in 2000 by the Land Transport Authority (LTA) in Singapore to supply the trains for the Circle line.
The Alstom Metropolis C751A is the first generation of communications-based train control (CBTC) electric multiple unit rolling stock in operation on the North East line of Singapore's Mass Rapid Transit (MRT) system since 2003. 25 trainsets were purchased for the line.
The Bombardier MOVIA C951 is the first generation electric multiple unit rolling stock in operation on the Downtown Line of Singapore's Mass Rapid Transit (MRT) system. The contract was won by Bombardier Transportation and the rolling stock was built by Changchun Bombardier Railway Vehicles. Initially, the authorities had ordered 73 trains, although LTA had ordered an additional 15 trains and a final 4 more trains under C951A which makes a total of 92 trainsets were manufactured under C951.
The Alstom Metropolis C830C is the second generation of communication-based train control (CBTC) electric multiple unit rolling stock in operation on the Circle line of Singapore's Mass Rapid Transit (MRT) system. 24 trainsets of 3 cars were manufactured by Shanghai Alstom Transport Co Ltd, with deliveries from end June 2014.
The Alstom Metropolis C751C is the second generation of communication-based train control (CBTC) electric multiple unit rolling stock in operation on the North East line of Singapore's Mass Rapid Transit (MRT) system. Eighteen 6-car train sets were manufactured by Shanghai Alstom Transport Co Ltd, Deliveries began in July 2014. All 18 trainsets were delivered by 2015.
The MP 14 is a rubber-tyred electric multiple unit for the Paris Métro. Manufactured by Alstom as part of the Alstom Metropolis family of units, it is the seventh generation of the rubber-tyred class of trains to be used on the system and is used on Line 14, Line 4 and Line 11. In future, trains could be ordered for Line 1 and Line 6.
The 9000 Series is a series of heavy rail rolling stock that operates on lines 2, 4, 9 and 10 of the Barcelona Metro. Transports Metropolitans de Barcelona (TMB) awarded the contract for the construction of the 9000 series to Alstom in 2002. Constructed in Belgium, France and Spain, they are part of the Alstom Metropolis family of underground trains. Today, the 9000 series also operates in Latin America on the Santo Domingo Metro, Panama Metro, Lima Metro, and 18 three-car trains of this model on Line 3 of the Sistema de Tren Eléctrico Urbano.
Sydney Trains is the operator and brand name of the train network serving the Greater Sydney metropolitan area in New South Wales, Australia. The network is a hybrid urban-suburban rail system with a central underground core that covers 369 km (229 mi) of route length over 813 km (505 mi) of track, with 170 stations on eight lines.
Sydney Metro is a fully automated rapid transit system in Sydney, New South Wales, Australia. The first component, the Metro North West Line, opened on 26 May 2019, running between Tallawong and Chatswood. It currently consists of 13 stations and 36 km (22.4 mi) of twin tracks, mostly underground. Work is progressing to extend this line from Chatswood to Bankstown as part of the City & Southwest project, which will run under Sydney Harbour and the Sydney Central Business District (CBD), with a scheduled 2025 completion. When completed, the entire line from Tallawong to Bankstown will have 66 km (41.0 mi) of twin tracks and 31 stations.
The Transperth C-series trains are a class of electric multiple units part of Alstom's X'Trapolis family of trains for Transperth that are being delivered as part of Metronet. The trains are operating on Perth's suburban rail network and entered service on the Joondalup and Mandurah lines on 8 April 2024.
The NSW TrainLink D sets, also referred to as the Mariyung trains, are a class of electric multiple units (EMU) being built to replace NSW TrainLink's Intercity EMU fleet. The trains will operate on services from Sydney to Newcastle, Lithgow and Kiama, allowing the retirement of NSW TrainLink's V set fleet, and freeing the H set fleet for reallocation to Sydney suburban services.
The Siemens Inspiro is a family of electric multiple unit trains designed and manufactured by Siemens Mobility since 2012 for metro systems. The product was launched on 19 September 2012 at the InnoTrans in Berlin. The first Inspiro entered service with Warsaw Metro on 6 October 2013.
Metro Trains Sydney Pty Ltd (MTS) is the operator of the Sydney Metro. It is a joint venture between Hong Kong-based MTR Corporation, John Holland Group and UGL Rail formed in September 2014. It operates the network with a fleet of 22 Alstom Metropolis trains under a 15-year contract.
The Alstom Metropolis C851E is the third generation electric multiple unit rolling stock introduced on the existing North East and Circle lines of Singapore's Mass Rapid Transit (MRT) system, manufactured by Alstom under Contract 851E. It consists of six North East line trains and 23 Circle line trains. The trains will be manufactured and assembled in Alstom's manufacturing facility in Barcelona, Spain and progressively shipped to Singapore from 2021 for the NEL and 2022 for the CCL. The contract, valued at S$249,854,305.00, was awarded by the Land Transport Authority during a ceremony held at Sengkang Depot. Alstom is the sole bidder for this contract. An additional 12 3-car trains will be purchased for use on the Circle line, from 2024 onwards.
Sydney Metro Western Sydney Airport, previously known as Sydney Metro Greater West, is a rapid transit rail project currently under-construction in Greater Western Sydney. The project involves the construction of a 23-kilometre (14 mi) line as part of the Sydney Metro system. The line will operate between St Marys, where the line will connect to the Main Western railway line, and Badgerys Creek Aerotropolis via the Western Sydney Airport. It is intended to provide public transport for the upcoming Western Sydney Airport. Construction of the line started in December 2022 and is expected to be completed in late 2026 in time for the opening of the airport.
MR3V/6V project name, for "Matériel Roulant 3 Voitures / 6 Voitures" are future rolling stock, to equip the new lines 15, 16 and 17 of the Paris Metro.
The Alstom Metropolis Saint-Laurent is a type of light metro train built by Alstom for the Réseau express métropolitain. Part of the Alstom Metropolis family, the initial order consisted of 106 two-car trains that were built in Sri City, India. The trains are fully automated (GoA4) with no driver or attendant on board the train. Trains run as a single two-car train at quieter times and as paired four-car trainsets during rush hour.
the North West Rail Link has been identified for the first new single deck services which will be introduced across key parts of the network in the next decade and beyond
in June 2012, Mr O'Farrell and Ms Berejiklian announced a break with that pre-election promise. Releasing a 50-year transport "masterplan", they said the line would be built as a stand-alone metro.
The consortium's AU$3.7bn (£1.95bn) contract package includes AU$1.7bn for new metro trains and core rail systems
Under the contract, valued at approx. €350 million, Alstom will be responsible for the project management, design, supply, manufacturing, testing and commissioning of 23 six-car fully-automated Metropolis trains and the Urbalis 400 Communication Based Train Control (CBTC) signalling system.