Ultimaker

Last updated
Ultimaker
Industry 3D printing
Founded2011;13 years ago (2011)
FoundersMartijn Elserman
Erik de Bruijn
Siert Wijnia
Headquarters
Utrecht
,
Netherlands
Number of locations
The Netherlands, USA, Singapore
Products3D printers, filaments, and 3D printing software
Number of employees
400 (2019)
Website ultimaker.com

Ultimaker is a 3D printer-manufacturing company based in the Netherlands, with offices and assembly lines in the US. [1] They make fused filament fabrication 3D printers, develop 3D printing software, and sell branded 3D printing materials. [2] Their product line includes the Ultimaker S5 and S3, Ultimaker 3 series, Ultimaker 2+ series and Ultimaker Original+. These products are used by industries such as automotive, architecture, healthcare, education, and small scale manufacturing.

Contents

History

Ultimaker BV is a Dutch 3D printer company that was founded in 2011 by Martijn Elserman, Erik de Bruijn, and Siert Wijnia. [3] Ultimaker started selling their products in May 2011. The company's foundation was laid at ProtoSpace Utrecht where Wijnia organized two workshops to build the RepRap Darwin 3D printer. Two Beta-workshops were organized at ProtoSpace Utrecht starting in September and December 2010, each consisting of 10 Monday evenings. Erik de Bruijn and Martijn Elserman assisted at those workshops. Frustration from their inability to get the Darwin design to work led to the inspiration to create their own design. Instead of sticking to the RepRap principle that their printer should be able to print its own parts, they designed their printer to be built mostly of laser cut plywood parts, that could be produced orders of magnitude faster than printed parts at the time. Their first prototypes bore the name "Ultimaker protobox" but newer prototypes were just titled "Ultimaker". In March 2011, Ultimaker ltd. released their first complete product, the "Ultimaker" (renamed in 2013 to "Ultimaker Original") under a Creative Commons BY-NC license. The Ultimaker Original was distributed as a Do It Yourself kit that hobbyists and technicians assembled themselves. It could print objects up to 210 mm x 210 mm x 205 mm at a maximum resolution of 20 microns.[ citation needed ]

Company milestones

2013

2015

2017

2018

2018

2019

2020

2022

Software

Their first software ran under a modified version of Replicator-G. They changed this later to Cura because more and more users started using this software in favor of Replicator-G, which was originally produced with Makerbot in mind. [17] When the lead developer for Cura started working for Ultimaker, Ultimaker Cura became the lead software product for Ultimaker. [18] Cura rapidly became a favorite of 3D printing enthusiasts. A YouMagine Survey found that 58% of users surveyed used Cura, compared to 23% that used Slic3r. [19] On September 26, 2017 the company announced that Cura had achieved one million users. This announcement was made at the TCT show. [20] [21] With the release of Cura 4.0, Ultimaker users were able to back up their files to the cloud. [22] As of 2020 the software was processing 1.4 million jobs per week. [11]

Printers

Ultimaker Original

The Ultimaker Original Ultimaker History - 5 Ultimaker Original (28127007460).jpg
The Ultimaker Original

The Ultimaker Original is the predecessor of the Ultimaker 2 and was released only a few months after the company was founded. The Ultimaker Original is sold as a kit containing laser-cut wood and technical components. The printer must be assembled by the user and is thus able to be tailored to the user's preference and modified to their will. In 2012, the Ultimaker Original was awarded Fastest and Most Accurate 3D printer available by MAKE Magazine. [23]

Ultimaker Original+

The Ultimaker Original+ Ultimaker Product - 4 Ultimaker Original+ (28127006350).jpg
The Ultimaker Original+

The Ultimaker Original+ is the main successor to the Ultimaker Original. It has an upgraded 24V power supply and heated build plate, however, it is not compatible with dual extrusion due to the limitations of the power supply.

Ultimaker 2

The Ultimaker 2 Ultimaker History - 6 Ultimaker 2.png
The Ultimaker 2

The Ultimaker 2 is Ultimaker's first out-of-the-box 3D printer. After transportation, the user must calibrate the build plate and insert filament before printing. The Ultimaker 2 was released in 2013 and laid the foundations for a further two printers to be added to the family before it was upgraded in 2015. Like the rest of the family, it uses an SD card to print and an LCD screen and rotary wheel to navigate through its menus. The Ultimaker 2 is also single extrusion only.

Ultimaker 2 Go

The Ultimaker 2 Go Ultimaker Product - 3 Ultimaker 2 Go.png
The Ultimaker 2 Go

The Ultimaker 2 Go is a compact and portable version of the Ultimaker 2. The printer has an exceptionally small build volume of just 120x120x115mm, allowing it to be moved from place to place in the special backpack provided. The Ultimaker 2 Go's smaller size does come at a cost, however as the build plate is not heated and it is thus highly recommended to apply masking tape to the build plate before printing. [24]

Ultimaker 2 Extended

The Ultimaker 2 Extended Ultimaker History - 7 Ultimaker 2 Extended.png
The Ultimaker 2 Extended

The Ultimaker 2 Extended is technically and physically identical to the Ultimaker 2, except for its 100mm higher build volume. It and the Ultimaker 2 Go were released simultaneously in April 2015.

Ultimaker 2+

The Ultimaker 2+ Product - 1 Ultimaker 2+ (28127007020).jpg
The Ultimaker 2+

The Ultimaker 2+ is the upgraded successor to the Ultimaker 2. It features an improved feeder wheel and tensioning system, interchangeable nozzles, and a redesigned nozzle heating system and fan.

Ultimaker 2 Extended+

The Ultimaker 2 Extended+ Product - 2 Ultimaker 2 Extended+ (27792975014).jpg
The Ultimaker 2 Extended+

The Ultimaker 2 Extended+ is a taller version of the Ultimaker 2+ and an upgraded version of the Ultimaker 2 Extended. Again, its print volume is 100mm higher but it is otherwise technically indifferent to its normal-sized version.

Ultimaker 3

The Ultimaker 3 with a spare PrintCore attached to the side of the printer Ultimaker 3.jpg
The Ultimaker 3 with a spare PrintCore attached to the side of the printer

The Ultimaker 3 is the successor to the successful Ultimaker 2+ family. It features dual extrusion, and compatibility with various other Ultimaker materials including PVA, PC, ABS, Nylon, and Breakaway. It was released in October 2016. The LCD control screen is recolored from blue to white and the navigation of the menus has been updated. In addition to this, when an Ultimaker material is placed on the spool holder, the Ultimaker 3 will automatically detect the material and its color through NFC, along with an estimate of its remaining length. [25] In 2019, The Mediahq recognized the Ultimaker 3 as the Best 3D Printer of 2019 for Enthusiasts. [26]

Ultimaker 3 Extended

The Ultimaker 3 Extended Ultimaker 3 Extended at the booth.jpg
The Ultimaker 3 Extended

The Ultimaker 3 Extended is a stretched version of the Ultimaker 3. Like the Ultimaker 2 Extended and 2 Extended+, the build volume is 100mm higher than on the Ultimaker 3.

Ultimaker S5

The Ultimaker S5 Ultimaker S5 printer exhibited at Hannover Messe 2018.jpg
The Ultimaker S5

The Ultimaker S5 is the first member of Ultimaker's "S-line" printer family. It has the biggest build volume of an Ultimaker printer to date by all dimensions and the build volume is consistent with both nozzles and dual extrusion. The Ultimaker S5 has a 4.7" color touchscreen replacing the older LCD screen and rotary wheel, a feeder system that pauses when material runs out and is compatible with glass and carbon fiber composites, among many other materials, [27] and a pair of hinged glass doors. Like the Ultimaker 3, the S5 prints from a USB drive, LAN, or Wi-Fi. However, unlike the Ultimaker 3, the S5 was developed for the professional market. It is certified by Materialise for FDA-approved medical applications. [28] [27] [29]

Ultimaker S3

In September 2019, the S3 was introduced as a smaller alternative to the S5. Like the S5, it was developed for the professional market. The S3 occupies a smaller footprint than the S5 and offers a smaller build volume. The dual extruders print using almost any 2.85 filaments, including abrasive filaments. [30] [31] [32]

Ultimaker 2+ Connect

The Ultimaker 2+ Connect is the upgraded successor to the Ultimaker 2+. It features a new feeder design similar to that of the S3 and S5 printers, as well as a completely redesigned electronics system to add a 2.4" touchscreen, cloud integration, and support for the optional air manager accessory. The Ultimaker 2+ Connect was designed for makers, professionals, and the education market. Similarly to all previous Ultimakers, it uses Ultimaker Cura for slicing and 2.85mm filament for the material spools. Unlike all printers released by Ultimaker from 2016 to 2019, it lacked the dual extrusion and NFC chip support that the Ultimaker 3/3 Extended and S3/S5 had. [33]

Add-ons

Ultimaker materials

In addition to making 3D printers, Ultimaker also manufacturers materials for their printers. These include:

A breakaway material was developed and released in 2017 to support multi-extrusion printing and reduce post-printing processing time. [35]

Dual Extrusion Pack

As the Ultimaker Original had to be assembled by the user, it was extensively modified and tinkered with. Many people added a second nozzle to the printer, allowing for dual extrusion. For a brief period of time, Ultimaker themselves sold a Dual Extrusion Pack, allowing users to have dual extrusion without having to experiment extensively.

Ultimaker S5 Pro bundle

The S5 Pro bundle was announced at the TCT Show in September 2019. The S5 Pro bundle is an upgrade of the Ultimaker S5. It includes the S5 air manager to provide a closed environment for printing to keep ultra-fine particles out of the air while printing and the S5 material station that can hold up to 6 spools of filament for continuous 24/7 printing and to keep fragile materials such as PVA in an ideal temperature- and humidity-controlled environment. [36] [32] [37] The company developed the setup as a bridge between industrial 3D printers and desktop printers. [38] [37]

Specifications

VariantUltimaker OriginalUltimaker 2Ultimaker 2 GoUltimaker 2 ExtendedUltimaker 3Ultimaker 3 ExtendedUltimaker S5Ultimaker S3Ultimaker 2+ Connect
Release dateMarch 2011September 2013April 2015April 2015October 2016October 2016April 2018September 2019November 2020
Build volume210 mm × 210 mm × 205 mm223 mm × 223 mm × 205 mm120 mm × 120 mm × 115 mm223 mm × 223 mm × 305 mm215 mm x 215 mm x 200 mm215 mm x 215 mm x 300 mm330 mm x 240 mm x 300 mm230 mm x 190 mm x 200 mm223 x 220 x 205 mm
Dual extrusion build volumeNot supported197 mm x 215 mm x 200 mm197 mm x 215 mm x 300 mmNot Supported
Layer resolutionup to 20 microns0.25 mm nozzle 150 - 60 micron

0.4 mm nozzle 200 - 20 micron

0.8 mm nozzle 600 - 20 micron

0.25 mm nozzle: 150 - 60 micron

0.4 mm nozzle: 200 - 20 micron

0.6 mm nozzle: 400 - 20 micron

0.8 mm nozzle: 600 - 20 micron

Print speed30 mm - 300 mm/s< 24 mm³/s
Travel speed30 mm - 350 mm/s
Filament diameter2.85 mm recommended2.85 mm2.85mm
Nozzle diameter0.4 mm swappable0.25 mm, 0.4 mm, 0.8 mm0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm
Operating nozzle temperature180 °C - 260 °C180 °C - 280 °C180 °C - 260 °C
Operating heated bed temperature-50 °C – 100 °C-50 °C - 100 °C20 °C - 100 °C20 °C - 140 °C20 °C - 110 °C
Frame dimensions357 mm × 342 mm × 388 mm258 mm × 250 mm × 287.5 mm493 mm × 342 mm × 688 mm342 mm x 380 mm x 389 mm342 mm x 380 mm x 489 mm495 mm x 457 mm x 520 mm394 mm x 489 mm x 637 mm342 mm x 460 mm x 580 mm
Printer technologyFused Filament Fabrication (FFF)
SoftwareCura (supplied)

Related Research Articles

<span class="mw-page-title-main">MakerBot</span> American desktop 3D printer manufacturer company

MakerBot Industries, LLC was an American desktop 3D printer manufacturer company headquartered in New York City. It was founded in January 2009 by Bre Pettis, Adam Mayer, and Zach "Hoeken" Smith to build on the early progress of the RepRap Project. It was acquired by Stratasys in June 2013. As of April 2016, MakerBot had sold over 100,000 desktop 3D printers worldwide. Between 2009 and 2019, the company released 7 generations of 3D printers, ending with the METHOD and METHOD X. It was at one point the leader of the desktop market with an important presence in the media, but its market share declined over the late 2010s. MakerBot also founded and operated Thingiverse, the largest online 3D printing community and file repository. In August 2022, the company completed a merger with its long-time competitor Ultimaker. The combined company is known as UltiMaker, but retains the MakerBot name for its Sketch line of education-focused 3D printers.

<span class="mw-page-title-main">Shapeways</span> New York-based 3D printing marketplace and service

Shapeways, Inc. is a global, 3D printing marketplace and service, publicly traded company. Users design and upload 3D printable files, and Shapeways prints the objects for them or others. 3D printing resources are available for university students, faculty, and educators with an .EDU email

Printrbot is a 3D printer company created by Brook Drumm in 2011 and originally funded through Kickstarter. Printrbot printers use fused deposition modelling to manufacture 3-dimensional artifacts.

Construction 3D Printing (c3Dp) or 3D construction Printing (3DCP) refers to various technologies that use 3D printing as a core method to fabricate buildings or construction components. Alternative terms for this process include "additive construction." "3D Concrete" refers to concrete extrusion technologies whereas Autonomous Robotic Construction System (ARCS), large-scale additive manufacturing (LSAM), or freeform construction (FC) refer to other sub-groups.

MatterHackers is an Orange County-based company founded in 2012 that supplies and sells 3D printing materials and tools. MatterHackers is developing their 3D printer control software, MatterControl.

<span class="mw-page-title-main">M3D (company)</span> American manufacturer of 3D printers

M3D, LLC is an American manufacturer of 3D printers in Fulton, Maryland. The company's flagship product is the "Micro 3D" or "Micro".

<span class="mw-page-title-main">Airwolf 3D</span>

Airwolf 3D is a company related to 3D printers.

<span class="mw-page-title-main">Formlabs</span>

Formlabs is a 3D printing technology developer and manufacturer. The Somerville, Massachusetts-based company was founded in September 2011 by three MIT Media Lab students. The company develops and manufactures 3D printers and related software and consumables. It is most known for raising nearly $3 million in a Kickstarter campaign and creating the Form 1, Form 1+, Form 2, Form Cell, Form 3, Form 3L, Fuse 1, Fuse 1+ and Form Auto stereolithography and selective laser sintering 3D printers and accessories.

Zortrax is a Polish manufacturer of 3D printers and filaments for SMB market and rapid prototyping for industries, including robotics and automation, architecture, industrial design, engineering, aviation, industrial automation. Zortrax machines work with dedicated software, firmware and filaments.

<span class="mw-page-title-main">Fused filament fabrication</span> 3D printing process

Fused filament fabrication (FFF), also known as fused deposition modeling, or filament freeform fabrication, is a 3D printing process that uses a continuous filament of a thermoplastic material. Filament is fed from a large spool through a moving, heated printer extruder head, and is deposited on the growing work. The print head is moved under computer control to define the printed shape. Usually the head moves in two dimensions to deposit one horizontal plane, or layer, at a time; the work or the print head is then moved vertically by a small amount to begin a new layer. The speed of the extruder head may also be controlled to stop and start deposition and form an interrupted plane without stringing or dribbling between sections. "Fused filament fabrication" was coined by the members of the RepRap project to give an acronym (FFF) that would be legally unconstrained in its use.

<span class="mw-page-title-main">AstroPrint</span>

AstroPrint is a cloud platform and application marketplace designed for consumer 3D printing by 3DaGoGo Inc., a private San Diego-based technology company.

<span class="mw-page-title-main">Prusa i3</span> 3D printer product line and related designs

The Prusa i3 is a family of fused deposition modeling 3D printers, manufactured by Czech company Prusa Research under the trademarked name Original Prusa i3. Part of the RepRap project, Prusa i3 printers were called the most used 3D printer in the world in 2016. The first Prusa i3 was designed by Josef Průša in 2012, and was released as a commercial kit product in 2015. The latest model is available in both kit and factory assembled versions. The Prusa i3's comparable low cost and ease of construction and modification made it popular in education and with hobbyists and professionals, with the Prusa i3 model MK2 printer receiving several awards in 2016.

<span class="mw-page-title-main">Cura (software)</span> 3D printer software

Cura is an open source slicing application for 3D printers. It was created by David Braam who was later employed by Ultimaker, a 3D printer manufacturing company, to maintain the software. Cura is available under LGPLv3 license. Cura was initially released under the open source Affero General Public License version 3, but on 28 September 2017 the license was changed to LGPLv3. This change allowed for more integration with third-party CAD applications. Development is hosted on GitHub. Ultimaker Cura is used by over one million users worldwide and handles 1.4 million print jobs per week. It is the preferred 3D printing software for Ultimaker 3D printers, but it can be used with other printers as well.

<span class="mw-page-title-main">3D printing processes</span> List of 3D printing processes

A variety of processes, equipment, and materials are used in the production of a three-dimensional object via additive manufacturing. 3D printing is also known as additive manufacturing, because the numerous available 3D printing process tend to be additive in nature, with a few key differences in the technologies and the materials used in this process.

<span class="mw-page-title-main">3D printing filament</span> Thermoplastic feedstock for 3D printers

3D printing filament is the thermoplastic feedstock for fused deposition modeling 3D printers. There are many types of filament available with different properties.

Marlin is open source firmware originally designed for RepRap project FDM 3D printers using the Arduino platform.

OctoPrint is an open source 3D printer controller application, which provides a web interface for the connected printers. It displays printers' status and key parameters and allows user to schedule prints and remotely control the printer.

Liquid additive manufacturing (LAM) is an additive manufacturing technique which deposits a liquid or high viscosity material (e.g Liquid Silicone Rubber) onto a build surface to create an object which then vulcanised using heat to harden the object. The process was originally created by Adrian Bowyer and was then built upon by the company German RepRap.

<span class="mw-page-title-main">Prusa Mini</span> Czech open-source fused deposition modelling 3D printer

The Prusa Mini, sometimes stylized as the Original Prusa MINI, is an open-source fused deposition modeling 3D printer that is manufactured by the Czech company Prusa Research. The printer is the lowest cost machine produced by Prusa Research and is designed as a first printer or as part of a 'print farm'.

Markforged is an American public additive manufacturing company that designs, develops, and manufactures The Digital Forge — an industrial platform of 3D printers, software and materials that enables manufacturers to print parts at the point-of-need. The company is headquartered in Waltham, Massachusetts, in the Greater Boston Area. Markforged was founded by Gregory Mark and the chief technology officer (CTO) David Benhaim in 2013. It produced the first 3D printers capable of printing continuous carbon fiber reinforcement and utilizes a cloud architecture.

References

  1. ↑ Ultimaker. "Ultimaker, Leading 3D Printer Manufacturer, Sees 3.5x Increase in North American Channel Partnerships". www.prnewswire.com. Retrieved 2018-03-21.
  2. ↑ Mueller, Andreas; Karevska, Stefana (March 21, 2018). "EY's Global 3D Printing Report 2016" (PDF).
  3. ↑ "About Ultimaker - Ultimaker". Ultimaker.com. Retrieved 22 March 2017.
  4. ↑ "Ultimaker 2+ Review: The Best Ultimaker So Far | All3DP". All3DP. 2016-03-26. Retrieved 2018-03-05.
  5. ↑ "Ultimaker Announces the Release of the Ultimaker 2+ and Ultimaker 2Extended+ 3D Printers | 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing". 3dprint.com. 2016-01-05. Retrieved 2018-03-05.
  6. ↑ "3D Printer Distribution: Ultimaker's North American Resellers Up By 350%, Nano Dimension Hits Q1 Beta Customer Goal | 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing". 3dprint.com. 2017-03-29. Retrieved 2018-03-05.
  7. ↑ Langnau, Leslie (2018-05-07). "Ultimaker partners with global material companies". Design World. WTWH Media. Retrieved 2018-05-31.
  8. ↑ Davies, Sam (2018-07-23). "Ultimaker opens office in Singapore to meet 3D printing demand in Asia Pacific". TCT Magazine. Retrieved 2018-08-02.
  9. ↑ "Ultimaker opens new APAC facility in Singapore to meet global demands" . Retrieved 2018-08-02.
  10. ↑ "Arkema and 3DXTech add FluorX filament to Ultimaker Cura". 3D Printing Media Network. 2019-03-15. Retrieved 2019-03-15.
  11. 1 2 MANUFACTUR3D (2019-07-01). "Ultimaker Moves to New Headquarters as Company Expands on Global Scale". MANUFACTUR3D. Retrieved 2019-07-03.{{cite web}}: CS1 maint: numeric names: authors list (link)
  12. ↑ "Ultimaker moves to new headquarters". www.designworldonline.com. 2 July 2019. Retrieved 2019-07-03.
  13. ↑ "Introducing the Ultimaker S3". www.ultimaker.com. Retrieved 2021-08-06.
  14. ↑ "Ultimaker 2+ Connect: Specs, Price, Release & Reviews". All3DP. Nov 10, 2020. Retrieved Nov 13, 2023.
  15. ↑ "MakerBot and Ultimaker agree to merge to accelerate global adoption of additive manufacturing". August 15, 2022. Archived from the original on 2022-08-15.
  16. ↑ "Stratasys Completes Merger of MakerBot With Ultimaker". Stratasys Ltd. Retrieved 2023-03-07.
  17. ↑ "ReplicatorG is a simple, open source 3D printing program - ReplicatorG". Replicat.org. Retrieved 22 March 2017.
  18. ↑ "Cura 3D Printing Slicing Software - Ultimaker". Ultimaker.com. Retrieved 22 March 2017.
  19. ↑ Halterman (2015-06-30). "YouMagine Survey Reveals 3D Printing Expert Wish List".
  20. ↑ "Ultimaker unveils new 3D printing software strategy at TCT Show". 2017-09-26.
  21. ↑ Griffiths, Laura (2017-09-26). "Ultimaker Unveils New 3D Printing Strategy". TCT Magazine.
  22. ↑ "Ultimaker Cura 4.0 Released with Improved User Interface and Updated Custom Mode Panel". All3DP. 2019-03-19. Retrieved 2019-03-26.
  23. ↑ magazine, Make (2012). MAKE : ultimate guide to 3D printing (MAKE special issue ed.). Sebastopol, CALIF: O'Reilly Media. ISBN   978-1449357375.
  24. ↑ "Ultimaker is proud to reveal the Ultimaker 2 Go and Ultimaker 2 Extended at CES Las Vegas | Ultimaker". Ultimaker.com. Retrieved 2015-11-05.
  25. ↑ "Ultimaker 3 3D Printer Review: High-Quality Prints, for a Price". Tom's Guide. 2017-01-13. Retrieved 2018-04-30.
  26. ↑ "Best Home 3D Printers 2019 - Reviews for Beginners and Enthusiasts". The Mediahq. 2019-10-21. Retrieved 2019-10-22.
  27. 1 2 "Ultimaker S5: Powerful, reliable, versatile 3D printing". ultimaker.com. Retrieved 2020-11-22.
  28. 1 2 Davies, Sam (2018-04-23). "Ultimaker launches largest professional desktop 3D printer to date". TCT Magazine. Retrieved 2018-04-30.
  29. ↑ "Materialise greenlights Ultimaker S5 for medical 3D printing - 3D Printing Industry". 3dprintingindustry.com. 2018-11-27. Retrieved 2018-11-28.
  30. ↑ "Ultimaker Announces S3 Professional 3D Printer". Fabbaloo. 24 September 2019. Retrieved 2019-09-25.
  31. ↑ Dignan, Larry. "Ultimaker launches Ultimaker S3, Ultimaker S5 Pro Bundle". ZDNet. Retrieved 2019-09-25.
  32. 1 2 "3D Printer Provider Ultimaker Targets Industrial Production with New Launches". www.ptonline.com. Retrieved 2019-09-27.
  33. ↑ "Ultimaker 2+ Connect 3D Printer is the New "Low-Cost" System in Ultimaker's Portfolio".
  34. ↑ "The Ultimaker Ecosystem, Composites and Owens Corning | 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing". 3dprint.com. October 2018. Retrieved 2018-10-02.
  35. ↑ "Ultimaker Rolls Out New Support Material Breakaway | All3DP". All3DP. 2017-12-08. Retrieved 2018-03-23.
  36. ↑ Davies, Sam (2019-09-24). "Ultimaker reveals S5 advancements and launches S3 3D printing platform at TCT Show". TCT Magazine. Retrieved 2019-09-25.
  37. 1 2 "Ultimaker S5 Bundle Brings Industrial Power to the Office". architosh.com. 25 September 2019. Retrieved 2019-09-27.
  38. ↑ "Ultimaker S5 Pro bridges industrial and desktop 3D printing". www.gigabitmagazine.com. Retrieved 2019-09-27.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.