Vickers F.B.16

Last updated

F.B.16
Vickers FB 16D scan.jpg
Vickers F.B.16D
Role Fighter aircraft
National origin United Kingdom
Manufacturer Vickers
Designer Rex Pierson
First flight1916

The Vickers F.B.16 was a British single-seat fighter aircraft of the First World War. It was originally designed to be powered by an experimental radial engine, development of which was abandoned. When re-engined with more powerful and reliable water-cooled V-8 engines, the F.B.16 demonstrated good performance, but only a few prototypes were built, the type not entering service.

Contents

Design and development

In 1914, following the outbreak of the First World War, the British engineering company, Vickers Limited, entered into an agreement with the Hart Engine Company of Leeds to fund development of an air-cooled radial engine, planned to generate 150 hp (112 kW). [1] Vickers planned several aircraft around the promising new engine, including a tractor configuration single-seat fighter designed by Rex Pierson, the F.B.16. Pierson's new fighter, also known as the Hart Scout was a single-bay biplane with heavily staggered wings of unequal span. It had a volumous, elliptical section fuselage, with the pilot sitting in an open cockpit above the lower wing and the Hart engine enclosed in a cowling. Armament was a single synchronised Vickers machine gun. [2] [3]

Side view Vickers F.B.16 side view.jpg
Side view

The prototype FB.16 made its maiden flight during 1916, [4] but testing showed that the pilot had a poor view, and the engine was prone to overheating. The aircraft was modified by removing the cowling to improve cooling and cutting down the fuselage behind the cockpit to improve the rearwards view. The problems with the Hart engine continued, however, and development of the radial was soon stopped. [5]

The F.B.16 was redesigned to use the water-cooled Hispano-Suiza 8 V-8 engine, rated at the same power as the Hart, with the new engine allowing a narrower fuselage. The revised aircraft (which may have been a rebuild of the Hart-powered prototype), [2] designated F.B.16A emerged late in 1916 but was destroyed in a crash on 20 December that year. A second prototype, serial number A8963 was completed in January 1917, being tested at Martlesham Heath in April. Although a maximum speed of 120 mph (193 km/h) was demonstrated, no orders followed, the Royal Aircraft Factory S.E.5, easier to maintain and already in production, being preferred. [6] [7]

A8963 was rebuilt with a 200 hp (149 kW) Hispano-Suiza engine, and modified wings as the F.B.16D, emerging in this form in June 1917. It was armed with a single Lewis gun mounted between the cylinder banks of the engine and firing through a hollow propeller shaft, while a second Lewis gun was mounted on a sliding mount above the upper wing. Performance was once again good, impressing the fighter pilot and air ace James McCudden, who recorded reaching a speed of 136 mph (219 km/h), stating "Whilst flying this machine I got some idea of the speed of future machines, for at 10,000 ft it was 30 mph faster than anything I had yet flown." [8] Officials were less impressed with the FB.16D, however, it being criticised for structural problems and maintenance access, being described as "not considered suitable in its present form for active service". [9]

Vickers again redesigned the F.B.16, fitting it with two-bay wings of longer (31 foot (9.45 m)) span and a 275 hp (205 kW) Lorraine-Dietrich 8 Bd engine as the FB.16E. Armament was a more conventional two Vickers machine guns. It was hoped to sell the revised fighter to the French Aéronautique Militaire , it being allocated the French official designation Vic.16.C1, but no orders followed, the FB.16E being destroyed in a crash on 29 July 1918. [10] A final version was the F.B.16H, which replaced the Lorrane-Dietrich with a 300 hp (224 kW) Hispano-Suiza, a speed of 147 mph (237 km/h) being claimed, but yet again, no production followed. [2] [11]

Specifications (F.B.16D)

Data from War Planes of the First World War:Volume Three Fighters [12]

General characteristics

Performance

Armament

See also

Aircraft of comparable role, configuration, and era

Notes

  1. ↑ Bruce 1969, pp. 100–101.
  2. 1 2 3 Mason 1992, pp. 80–81.
  3. ↑ Bruce 1957, pp. 681–682.
  4. ↑ Andrews and Morgan 1988, p. 53.
  5. ↑ Bruce 1969, p. 107.
  6. ↑ Bruce 1969, pp. 107–108.
  7. ↑ Bruce 1957, pp. 683–684.
  8. ↑ Andrews and Morgan 1988, pp. 63–64.
  9. ↑ Bruce 1969, p. 109.
  10. ↑ Bruce 1969, p. 110–112.
  11. ↑ Bruce 1957, p. 685.
  12. ↑ Bruce 1969, p. 112.

Related Research Articles

Bristol F.2 Fighter British fighter aircraft used in World War One

The Bristol F.2 Fighter was a British two-seat biplane fighter and reconnaissance aircraft of the First World War developed by Frank Barnwell at the Bristol Aeroplane Company. It is often simply called the Bristol Fighter, other popular names include the "Brisfit" or "Biff".

Bartel BM 6

The Bartel BM 6 was a Polish biplane trainer fighter aircraft of 1930. It did not advance beyond the prototype stage.

PZL P.1

The PZL P.1 was a Polish fighter, designed by the engineer Zygmunt Puławski, manufactured by the PZL state-owned factory. It remained a prototype, but it was the first of the Polish PZL gull wing fighter series, leading to the PZL P.7, PZL P.11 and PZL P.24.

The Blériot-SPAD S.81 was a French fighter aircraft developed in 1923 to a requirement by the French Air Force. It was flown competitively against the Dewoitine D.1 and was selected over that aircraft due to the Dewoitine's more radical design, leading to an order for 80 aircraft. The S.81 was a single-bay biplane of conventional configuration with I-shaped interplane struts and lacking Herbemont's usual swept upper wing. It featured a wooden fuselage of monocoque construction and metal wings skinned in fabric. Production versions differed from the prototypes in having a lengthened fuselage and larger tail fin.

Vickers Vampire

The Vickers F.B.26 Vampire was a British single-seat pusher biplane fighter built by Vickers during the First World War.

Nieuport-Delage NiD 29 French WW1/post-WW1/between the wars fighter aircraft

The Nieuport-Delage NiD.29 was a French single-seat biplane fighter designed and built by Nieuport-Delage for the French Air Force.

The Renard Epervier was a Belgian prototype single-seat all-metal fighter monoplane designed by Alfred Renard at the Societé Anonyme Avions et Moteurs Renard for a government-sponsored design contest in 1928. The Epervier Type 2 was built and flown in 1928, by Belgian aircraft manufacturer Stampe et Vertongen. It carried an armament of two synchronised 7.7mm guns and was lost in September 1928 after failing to recover from a flat spin. A second prototype, the Epervier Type 2bis, introduced revised streamlined fairings for the cantilever mainwheel legs, mainwheel spats and cylinder aft-fairings and was built by SABCA.

Vickers F.B.12

The Vickers F.B.12 was a biplane pusher fighter aircraft developed during World War I by Vickers Limited. The failure of the engine for which it was designed, and the obsolescence of the pusher configuration, resulted in its remaining an experimental type only.

The Sopwith 2FR.2 Bulldog was a prototype British two-seat fighter of the First World War. A single-engined biplane, the Bulldog was a fighter/reconnaissance aircraft intended to replace the Bristol F.2 Fighter, but was unsuccessful, with no replacement for the Bristol Fighter being purchased.

Royal Aircraft Factory N.E.1

The Royal Aircraft Factory N.E.1 was a prototype British Night fighter of the First World War. A single-engined pusher biplane, it was a development of the Royal Aircraft Factory's earlier F.E.9 fighter, but was not successful, only six being built.

The Vickers F.B.24 was a British two-seat fighter aircraft of the First World War. Only a few prototypes were built, as, although it had good performance, the Bristol F.2 Fighter was preferred.

Vickers F.B.25

The Vickers F.B.25 was a British two-seat night fighter prototype of World War I designed to attack enemy airships. Completed in 1917, it failed in its official flight tests that year and no order for production resulted.

Nieuport-Delage NiD-120

The Nieuport-Delage NiD 120 series was a series of French single-seat parasol monoplane fighter aircraft of the 1930s. It was built in a number of versions, fitted with various types of engines, with six aircraft designated NiD 123 being sold to Peru.

Hispano-Suiza E-30

The Hispano Suiza E-30, later renamed Hispano E-30, was designed in Spain in 1930 as a multi-purpose intermediate trainer. It was a single engine, parasol wing monoplane. About 25 served with the Spanish armed forces until 1945.

PZL P.8

P.Z.L. P.8 was a fighter designed by Ing. Zygmunt Puławski and constructed by P.Z.L. from 1930.

The Wibault Wib 1, Wib C1 or, later, Wib 1 C1 was a French World War I single seat, single engine fighter aircraft prototype. Flown near the end of the war, it was not selected for production.

The Wibault 9 or Wib 9 was a single seat, parasol wing fighter aircraft designed and built in France in the 1920s. It was a re-engined version of the relatively successful Wib 7, but failed to reach production.

The Hanriot HD.5 was a French two-seat fighter aircraft prototype, built towards the end of World War I. A single-engine biplane with an unusually narrow gap between the upper and lower wings, it did not enter production.

Blériot-SPAD S.91

The Blériot-SPAD S.91 was a French light-weight fighter aircraft. It would be later developed into the Blériot-SPAD S.510, the last biplane produced by the French aeronautic industries.

De Marçay 2

The de Marçay 2 C1 was a single seat biplane fighter designed in France and first flown in 1919. It did not go into production.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.