Volcanic Repeating Arms

Last updated
Volcanic Repeating Arms
Company type Private
Industry Weapons
PredecessorSmith & Wesson Company
Founded1855;169 years ago (1855)
Founders Horace Smith; Daniel B. Wesson
Defunct1856;168 years ago (1856)
FateAcquired
SuccessorNew Haven Arms Company
Headquarters,
United States
Key people
Horace Smith; Daniel B. Wesson; Benjamin Tyler Henry; Oliver Winchester; Courtlandt Palmer
Products Rifles, Pistols, Ammunition

The Volcanic Repeating Arms Company was an American company formed in 1855 by partners Horace Smith and Daniel B. Wesson to develop Walter Hunt's Rocket Ball ammunition and lever action mechanism. Volcanic made an improved version of the Rocket Ball ammunition, and a carbine and pistol version of the lever action gun to fire it. While the Volcanic Repeating Arms Company was short-lived, its descendants, Winchester Repeating Arms Company and Smith & Wesson became major firearms manufactures.

Contents

A Volcanic pocket pistol Volcanic Pocket pistol.jpg
A Volcanic pocket pistol
A Volcanic rifle, 16 1/2 inch barrel Volcanic Carbine.jpg
A Volcanic rifle, 16 1/2 inch barrel

History

The original 1848 Volcanic Repeating Rifle design by Hunt was revolutionary, introducing an early iteration of the lever action repeating mechanism and the tubular magazine still common today. However, Hunt's design was far from perfect, and only a couple of prototypes were developed; the only one known is currently in the Firearms Museum in Cody, Wyoming. Lewis Jennings patented an improved version of Hunt's design in 1849, and versions of the Jenning's patent design were built by Robbins & Lawrence Co. (under the direction of shop foreman Benjamin Tyler Henry) and sold by C. P. Dixon. Horace Smith was also hired by Courtlandt Palmer to improve the Jennings Rifle, patenting the Smith-Jennings in 1851. It is estimated that fewer than 2000 of these two models were made until 1852, when financial troubles ceased production. [1] [2]

In 1854, partners Horace Smith and Daniel B. Wesson joined with Courtlandt Palmer, the businessman who had purchased the Jennings and Smith-Jennings patent rights, [3] and further improved on the operating mechanism, developing the Smith & Wesson Lever pistol, and a new Volcanic cartridge. Production was in the shop of Horace Smith in Norwich, Connecticut. The new cartridge improved upon the Hunt Rocket Ball with the addition of a primer. Originally using the name "Smith & Wesson Company", the name was changed to "Volcanic Repeating Arms Company" in 1855, with the addition of new investors, one of which was Oliver Winchester. The Volcanic Repeating Arms Company obtained all rights for the Volcanic designs (both rifle and pistol versions were in production by this time) as well as the ammunition, from the Smith & Wesson Company. Wesson remained as plant manager for 8 months before rejoining Smith to found the "Smith & Wesson Revolver Company" upon obtaining the licensing of the Rollin White rear loading cylinder patent.

A full size Volcanic pistol Smith & Wesson Patent model (Volcanic) Pistol.jpg
A full size Volcanic pistol

Winchester forced the insolvency of the Volcanic Arms Company in late 1856, took over ownership and moved the plant to New Haven, Connecticut, where it was reorganized as the New Haven Arms Company in April 1857. B. Tyler Henry was hired as plant superintendent when Robbins & Lawrence suffered financial difficulties and Henry left their employ. While continuing to make the Volcanic rifle and pistol, Henry began to experiment with the new rimfire ammunition, and modified the Volcanic lever action design to use it. The result was the Henry rifle. By 1866, the company once again reorganized, this time as the Winchester Repeating Arms company, and the name of Winchester became synonymous with lever action rifles. [2] [4] [5]

Set in 1875, Have Gun Will Travel Radio Episode "Landfall" aired November 08, 1959. A character offers Paladin use of his Jennings rifle.

The Rider, the title character of Edward M. Erdelac's Judeocentric Lovecraftian weird west series Merkabah Rider, carries a Volcanic pistol inlaid with gold and silver and bearing various Solomonic talismans and wards, including a jeweled Tree of Sephiroth on the handle. [6]

It also features as one of the weapon cards in the Spaghetti Western-themed card game Bang!.

In the 2005 videogame “Gun”, a weapon called the “Volcanic 10” is unlocked as a pistol. The pistol is fired and reloaded as a revolver in the game, however, it holds 10 shots.

The 2007 videogame " Fistful of Frags " also features the Volcanic pistol as a weapon.

The Volcanic pistol is one of the many sidearms the player can get in the 2010 Western videogame Red Dead Redemption , as well as its 2018 sequel, Red Dead Redemption 2 , and its online multiplayer expansion, Red Dead Online .

Related Research Articles

<span class="mw-page-title-main">Action (firearms)</span> Functional mechanism of breech-loading

In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.

<span class="mw-page-title-main">John Browning</span> American firearms designer (1855–1926)

John Moses Browning was an American firearm designer who developed many varieties of military and civilian firearms, cartridges, and gun mechanisms, many of which are still in use around the world. He made his first firearm at age 13 in his father's gun shop and was awarded the first of his 128 firearm patents on October 7, 1879, at the age of 24. He is regarded as one of the most successful firearms designers of the 19th and 20th centuries and a pioneer of modern repeating, semi-automatic, and automatic firearms.

<span class="mw-page-title-main">Smith & Wesson</span> American manufacturer of firearms and ammunition

Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Maryville, Tennessee, United States.

Winchester rifle is a comprehensive term describing a series of lever action repeating rifles manufactured by the Winchester Repeating Arms Company. Developed from the 1860 Henry rifle, Winchester rifles were among the earliest repeaters. The Model 1873 was particularly successful, being marketed by the manufacturer as "The Gun That Won the West".

<span class="mw-page-title-main">Oliver Winchester</span> American businessman and politician

Oliver Fisher Winchester was an American businessman and politician, best known as being the founder of the Winchester Repeating Arms Company.

<span class="mw-page-title-main">Rimfire ammunition</span> Type of ammunition that is only commonly found in small-caliber firearms

A rim-fire is a type of metallic cartridge used in firearms, where the primer is located within a hollow circumferential rim protruding from the base of its casing. When fired, the gun's firing pin will strike and crush the rim against the edge of the barrel breech, sparking the primer compound within the rim, and in turn ignite the propellant within the case. Invented in 1845, by Louis-Nicolas Flobert, the first rimfire metallic cartridge was the .22 BB Cap cartridge, which consisted of a percussion cap with a bullet attached to the top. While many other different cartridge priming methods have been tried since the early 19th century, such as teat-fire and pinfire, only small caliber rimfire and centerfire cartridges have survived to the present day with regular use. The .22 Long Rifle rimfire cartridge, introduced in 1887, is by far the most common ammunition found in the world today in terms of units manufactured and sold.

A repeating rifle is a single-barreled rifle capable of repeated discharges between each ammunition reload. This is typically achieved by having multiple cartridges stored in a magazine and then fed individually into the chamber by a reciprocating bolt, via either a manual or automatic action mechanism, while the act of chambering the round typically also recocks the hammer/striker for the following shot. In common usage, the term "repeating rifle" most often refers specifically to manual repeating rifles, as opposed to self-loading rifles, which use the recoil, gas, or blowback of the previous shot to cycle the action and load the next round, even though all self-loading firearms are technically a subcategory of repeating firearms.

<span class="mw-page-title-main">Lever action</span> Type of firearm action

A lever action is a type of action for repeating firearms that uses a manually operated cocking handle located around the trigger guard area that pivots forward to move the bolt via internal linkages, which will feed and extract cartridges into and out of the chamber, and cock the firing pin mechanism. This contrasts to other type of repeating actions such as the bolt-action, pump-action, semi-automatic, fully automatic, and/or burst mode actions. A firearm using this operating mechanism is colloquially referred to as a levergun.

<span class="mw-page-title-main">Magazine (firearms)</span> Ammunition feeding device of a firearm

A magazine, often simply called a mag, is an ammunition storage and feeding device for a repeating firearm, either integral within the gun or externally attached. The magazine functions by holding several cartridges within itself and sequentially pushing each one into a position where it may be readily loaded into the barrel chamber by the firearm's moving action. The detachable magazine is sometimes colloquially referred to as a "clip", although this is technically inaccurate since a clip is actually an accessory device used to help load ammunition into a magazine or cylinder.

The Winchester Repeating Arms Company was a prominent American manufacturer of repeating firearms and ammunition. The firm was established in 1866 by Oliver Winchester and was located in New Haven, Connecticut. The firm went into receivership in 1931 and was bought by the Western Cartridge Company, a forerunner of the Olin Corporation. The Winchester brand name is still owned by the Olin Corporation, which makes ammunition under that name. The Winchester name is also used under license for firearms produced by two subsidiaries of the Herstal Group – FN Herstal of Belgium and the Browning Arms Company of Ogden, Utah.

<span class="mw-page-title-main">Horace Smith (inventor)</span> American gunsmith, inventor, and businessman

Horace Smith was an American gunsmith, inventor, and businessman. He and his business partner Daniel B. Wesson formed two companies named "Smith & Wesson", the first of which was eventually reorganized into the Winchester Repeating Arms Company and the latter of which became the modern Smith & Wesson.

<span class="mw-page-title-main">Daniel B. Wesson</span> American gunsmith

Daniel Baird Wesson was an American inventor and firearms designer. He helped develop several influential firearm designs over the course of his life; he and Horace Smith were the co-founders of two companies named "Smith & Wesson", the first of which was eventually reorganized into the Winchester Repeating Arms Company and the latter of which became the modern Smith & Wesson.

<span class="mw-page-title-main">Benjamin Tyler Henry</span> American gunsmith and manufacturer

Benjamin Tyler Henry was an American gunsmith and manufacturer. He was the inventor of the Henry rifle, the first reliable lever-action repeating rifle.

The Henry repeating rifle is a lever-action tubular magazine rifle famed both for its use at the Battle of the Little Bighorn and being the basis for the iconic Winchester rifle of the American Wild West.

<span class="mw-page-title-main">Break action</span> Type of firearm action

Break action is a type of firearm action in which the barrel(s) are hinged much like a door and rotate perpendicularly to the bore axis to expose the breech and allow loading and unloading of cartridges. A separate operation may be required for the cocking of a hammer to fire the new round. There are many types of break-action firearms; break actions are universal in double-barreled shotguns, double-barreled rifles, combination guns, and are commonly found in single shot pistols, rifles, shotguns, including flare guns, grenade launchers, air guns, and some older revolver designs. They are also known as hinge-action, break-open, break-barrel, break-top, or, on old revolvers, top-break actions.

<span class="mw-page-title-main">Rocket Ball</span>

The Rocket Ball was one of the earliest forms of metallic cartridge for firearms, containing bullet and powder in a single, metal-cased unit.

<span class="mw-page-title-main">Colt-Burgess rifle</span> Lever-action rifle

The Colt-Burgess rifle, also known as the 1883 Burgess rifle or simply the Burgess rifle, is a lever-action repeating rifle produced by Colt's Patent Firearms Manufacturing Company between 1883 and 1885. The Burgess rifle was Colt's only entrance into the lever-action rifle market, produced to compete with Winchester Repeating Arms Company's line of popular rifles. The 1883 Burgess rifle was designed and patented by Andrew Burgess, an American firearms designer and photographer, who sold the design to Colt.

<span class="mw-page-title-main">Colt Ring Lever rifles</span> Rifle

The Colt First Model Ring Lever rifle and Colt Second Model Ring Lever rifle are two early caplock revolving rifles that were produced by the Patent Arms Manufacturing Company between 1837 and 1841. The First Model, produced between 1837 and 1838, was the first firearm manufactured by Samuel Colt, developed shortly before the advent of the Colt Paterson revolver. The First Model was succeeded by the Second Model, produced between 1838 and 1841, which featured minor variations in design and construction. Both models are distinguished from later Colt revolving long-arms by the presence of a small ring lever located in front of the trigger. This lever, when pulled, would index the cylinder to the next position and cock the internal hidden hammer. Although complicated in design and prone to failures, fifty First Model rifles were ordered by the U.S. Army for use against Seminole warriors in the Second Seminole War.

<span class="mw-page-title-main">Repeating firearm</span> Firearms that can be discharged multiple times after a single ammunition reload

A repeating firearm or repeater is any firearm that is capable of being fired repeatedly before having to be manually reloaded with new ammunition into the firearm.

References

  1. Jim Taylor. "Leverguns: A Short History".
  2. 1 2 Charles Winthrop Sawyer (1920). Firearms in American History. Charles Winthrop Sawyer.
  3. Henshaw, Thomas (1993). The History of Winchester Firearms 1866-1992. Academic Learning Company LLC. p. 3. ISBN   978-0-8329-0503-2.
  4. "A Guide to Ammunition Collecting". International Ammunition Association.
  5. Daniel Coit Gilman; Harry Thurston Peck; Frank Moore Colby (1904). The New International Encyclopædia. Dodd, Mead and Company.
  6. Erdelac, Edward M. (2009). Merkabah Rider: Tales of a High Planes Drifter. Damnation Books. p. 9. ISBN   978-1-61572-061-3.

Bibliography